PLA140 Single Pole OptoMOS® Relay Load Voltage Load Current Max RON PLA140 400 250 8 Description PLA140 is a 400V, 250mA, 8Ω 1-Form-A relay. This performance leader combines high peak load voltage capability, high peak load current capability, and very low on-resistance to provide superior performance. Units V mA Ω Features • Small 6 Pin DIP Package • Low Drive Power Requirements (TTL/CMOS Compatible) • No Moving Parts • High Reliability • Arc-Free With No Snubbing Circuits • 3750VRMS Input/Output Isolation • FCC Compatible • VDE Compatible • No EMI/RFI Generation • Machine Insertable, Wave Solderable • Surface Mount and Tape & Reel Versions Available Approvals • UL Recognized: File Number E76270 • CSA Certified: File Number LR 43639-10 • BSI Certified to: • BS EN 60950:1992 (BS7002:1992) Certificate #: 7344 • BS EN 41003:1993 Certificate #: 7344 Ordering Information Applications • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Medical Equipment—Patient/Equipment Isolation • Security • Aerospace • Industrial Controls • Automotive Part # PLA140 PLA140S PLA140STR Description 6 Pin DIP (50/Tube) 6 Pin Surface Mount (50/Tube) 6 Pin Surface Mount (1,000/Reel) Pin Configuration PLA140 Pinout PLA140 Pinout AC/DC Configuration DC Only Configuration + Control – Control Do Not Use 1 6 2 5 3 4 + Control Load – Control Do Not Use Do Not Use Load 1 6 2 5 3 4 + Load – Load Switching Characteristics of Normally Open (Form A) Devices 10ms CONTROL + 90% LOAD 10%+ 10%+ TON DS-PLA140-R5 www.clare.com TOFF 1 PLA140 Absolute Maximum Ratings (@ 25˚ C) Parameter Input Power Dissipation Input Control Current Peak (10ms) Reverse Input Voltage Total Power Dissipation Isolation Voltage Input to Output Operational Temperature Storage Temperature Soldering Temperature DIP Package Surface Mount Package (10 Seconds Max.) 1 Derate Linearly 1.33 mw/˚C 2 Derate Linearly 6.67 mw/˚C Min - Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Typ Max Units - 1501 mW 50 mA 1 A 5 V - 8002 mW 3750 -40 -40 - VRMS +85 °C +125 °C - - +260 +220 °C °C Electrical Characteristics Parameter Output Characteristics @ 25°C Load Voltage (Peak) Load Current (Continuous) AC/DC Configuration DC Configuration Peak Load Current On-Resistance AC/DC Configuration DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics @ 25°C Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Voltage Reverse Input Current Common Characteristics @ 25°C Input to Output Capacitance Input to Output Isolation 2 Conditions Symbol Min Typ Max Units - VL - - 400 V 10ms IL IL IL - - 250 350 500 mA mA mA IL=250mA IL=350mA VL=400V RON RON ILEAK - 6 2 - 8 3 1 Ω Ω µA IF=5mA, VL=10V IF=5mA, VL=10V 50V; f=1MHz TON TOFF COUT - 65 3.0 1.0 - ms ms pF IL=250mA IF=5mA VR=5V IF IF VF VR IR 5 0.4 0.9 - 0.7 1.2 - 50 1.4 5 10 mA mA V V µA - CI/O VI/O 3750 3 - - pF VRMS www.clare.com Rev. 5 PLA140 PERFORMANCE DATA* 35 PLA140 Typical On-Resistance Distribution (N=50 Ambient Temperature = 25°C) (Load Current = 250mADC; IF = 5mADC) Device Count (N) 25 20 15 10 35 35 30 30 25 20 15 10 5 5 0 0 1.17 1.19 1.21 1.23 5.03 10 5.38 5.73 6.08 6.43 6.78 430 25 20 20 5 0 2.1 2.7 3.3 3.9 15 10 5 4.5 0.9 1.5 Current (mA) 300 Load Current (mA) 350 20 15 10 5 0 2.1 3.3 2.7 0.030 0.042 0.054 0.39 0.066 20mA 10mA 5mA 200 0 20 40 60 80 100 -40 120 Turn-On (ms) 465 460 455 0 1.50 1.00 10mA 20mA Temperature (°C) 80 100 60 80 100 0.060 0.050 0.040 0.030 5mA 0.020 0.010 0 0 60 40 0.070 0.50 445 20 PLA140 Typical Turn-Off vs. Temperature (Load Current = 250mADC) 5mA 450 40 -20 Temperature (°C) PLA140 Typical Turn-On vs. Temperature (Load Current = 250mADC) 2.00 20 0.04 0 -20 2.50 0 0.06 0.02 480 470 1.69 0.08 Temperature (°C) 475 1.43 PLA140 Typical Leakage vs. Temperature (Measured across Pins 4 & 6) 150 -40 485 1.17 Turn-On (ms) 250 0.078 0.91 0.10 PLA140 Typical Blocking Voltage vs. Temperature -20 0.65 0.12 Turn-Off (ms) -40 5 3.9 100 0.018 10 PLA140 Typical Load Current vs. Temperature 25 490 15 Current (mA) PLA140 Typical Turn-Off Time (N=50 Ambient Temperature = 25°C) (Load Current = 250mADC; IF = 5mADC) 478 0 0 Leakage (µA) 1.5 Device Count (N) 25 20 10 466 PLA140 Typical Turn-On Time (N=50 Ambient Temperature = 25°C) (Load Current = 250mADC; IF = 5mADC) 25 15 454 442 Blocking Voltage (V) PLA140 Typical IF for Switch Dropout (N=50 Ambient Temperature = 25°C) (Load Current = 250mADC) Device Count (N) Device Count (N) 15 On-Resistance (Ω) PLA140 Typical IF for Switch Operation (N=50 Ambient Temperature = 25°C) (Load Current = 250mADC) Device Count (N) 20 0 1.25 LED Forward Voltage Drop (V) Blocking Voltage (VRMS) 25 5 Turn-Off (ms) Device Count (N) 30 PLA140 Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25°C) Device Count (N) PLA140 Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25°C; IF = 5mADC) -40 -20 0 20 40 60 Temperature (°C) 80 100 -40 -20 0 20 40 60 80 100 Temperature (°C) The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. 5 www.clare.com 3 PLA140 PERFORMANCE DATA* PLA140 Typical Turn-On vs. LED Forward Current (Load Current = 250mADC) 1.6 1.4 50mA 30mA 20mA 10mA 5mA 1.2 1.0 1.0 0.050 0.9 0.045 0.8 0.040 0.7 0.6 0.5 0.4 0.3 0.2 0.8 0 20 40 60 80 100 120 20 40 5 10 15 20 25 30 35 40 45 50 0 5 10 60 80 100 -20 0 20 40 60 80 100 Temperature (°C) PLA140 Typical Load Current vs. Load Voltage (Ambient Temperature = 25°C; IF = 5mADC) 20 25 30 35 40 45 50 PLA140 Typical IF for Switch Dropout vs. Temperature (Load Current = 250mADC) LED Current (mA) -40 15 LED Forward Current (mA) 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 Temperature (°C) 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 -40 -20 0 20 40 60 80 100 Temperature (°C) PLA140 Energy Rating Curve 1.2 1.0 Load Current (A) 250 200 150 100 50 0 -50 -100 -150 -200 -250 -2.0 -1.5 0.015 PLA140 Typical IF for Switch Operation vs. Temperature (Load Current = 250mADC) LED Current (mA) On-Resistance (Ω) 10 9 8 7 6 5 4 3 2 1 0 0 0.020 LED Forward Current (mA) PLA140 Typical On-Resistance vs. Temperature (Load Current = 250mADC; IF = 5mADC) -20 0.025 0 0 Temperature (°C) -40 0.030 0.005 0 -20 0.035 0.010 0.1 -40 Load Current (mA) PLA140 Typical Turn-Off vs. LED Forward Current (Load Current = 250mADC) Turn-Off (ms) 1.8 Turn-On (ms) LED Forward Voltage Drop (V) PLA140 Typical LED Forward Voltage Drop vs. Temperature 0.8 0.6 0.4 0.2 -1.0 -0.5 0 0.5 Load Voltage (V) 1.0 1.5 2.0 0 10µs 100µs 1ms 10ms 100ms 1s 10s 100s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com Rev. 5 PLA140 Mechanical Dimensions 8.382 ± .635 (.330 ± .025) 6 Pin DIP Through Hole (Standard) 2.540 ± .127 (.100 ± .005) 7.620 ± .254 (.300 ± .010) 7.239 TYP. (.285) 3.302 (.130) 6.350 ± .127 (.250 ± .005) 9.144 ± .508 (.360 ± .020) 7.620 ± .127 (.300 ± .005) 5.080 ± .127 (.200 ± .005) PC Board Pattern (Top View) 2.540 ± .127 2.540 ± .127 (.100 ± .005) (.100 ± .005) 9.525 ± .254 (.375 ± .010) 6.350 ± .127 (.250 ± .005) 3.302 (.130) 2.540 ± .127 (.100 ± .005) 6.350 ± .127 (.250 ± .005) 9.144 (.360) 8.382 ± .635 (.330 ± .025) 7.620 ± .254 (.300 ± .010) .635 TYP. (.025) 6-.800 DIA. (6-.031 DIA.) .457 ± .076 (.018 ± .003) 6 Pin DIP Surface Mount (“S” Suffix) 4.445 ± .127 (.175 ± .005) PC Board Pattern (Top View) 8.305 ± .127 (.327 ± .005) 1.905 ± .127 (.075 ± .005) .254 TYP. (.010) .457 ± .076 (.018 ± .003) 1.499 ± .127 (.059 ± .005) Tape and Reel Packaging for 6 Pin Surface Mount Package 330.2 DIA. (13.00) Top Cover Tape Thickness .102 MAX. (.004) 6.731 MAX. 1.753 ± .102 (.265) (.069 ± .004) .406 MAX. (.016) 2.007 ± .102 1.498 ± .102 3.987 ± .102 (.079 ± .004) (.059 ± .004) (.157 ± .004) 7.493 ± .102 (.295 ± .004) 1 6 12.090 (.476) 10.100 (.398) 4.877 (.192) Top Cover Tape Embossed Carrier 16.002 ± .305 (.630 ± .012) .050R TYP. 11.989 ± .102 (.472 ± .004) 10.100 ± .102 (.398 ± .004) 1.549 ± .102 (.061 ± .004) User Direction of Feed Embossment Dimensions mm (inches) Rev. 5 www.clare.com 5 Worldwide Sales Offices CLARE LOCATIONS EUROPE ASIA PACIFIC Clare Headquarters 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE European Headquarters CP Clare nv Bampslaan 17 B-3500 Hasselt (Belgium) Tel: 32-11-300868 Fax: 32-11-300890 Clare Micronix Division 145 Columbia Aliso Viejo, CA 92656-1490 Tel: 1-949-831-4622 Fax: 1-949-831-4628 France Clare France Sales Lead Rep 99 route de Versailles 91160 Champlan France Tel: 33 1 69 79 93 50 Fax: 33 1 69 79 93 59 Asian Headquarters Clare Room N1016, Chia-Hsin, Bldg II, 10F, No. 96, Sec. 2 Chung Shan North Road Taipei, Taiwan R.O.C. Tel: 886-2-2523-6368 Fax: 886-2-2523-6369 SALES OFFICES AMERICAS Americas Headquarters Clare 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Eastern Region Clare P.O. Box 856 Mahwah, NJ 07430 Tel: 1-201-236-0101 Fax: 1-201-236-8685 Toll Free: 1-800-27-CLARE Central Region Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Western Region Clare 1852 West 11th Street, #348 Tracy, CA 95376 Tel: 1-209-832-4367 Fax: 1-209-832-4732 Toll Free: 1-800-27-CLARE Canada Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Germany Clare Germany Sales ActiveComp Electronic GmbH Mitterstrasse 12 85077 Manching Germany Tel: 49 8459 3214 10 Fax: 49 8459 3214 29 Italy C.L.A.R.E.s.a.s. Via C. Colombo 10/A I-20066 Melzo (Milano) Tel: 39-02-95737160 Fax: 39-02-95738829 Sweden Clare Sales Comptronic AB Box 167 S-16329 Spånga Tel: 46-862-10370 Fax: 46-862-10371 United Kingdom Clare UK Sales Marco Polo House Cook Way Bindon Road Taunton UK-Somerset TA2 6BG Tel: 44-1-823 352541 Fax: 44-1-823 352797 http://www.clare.com Clare cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in this Clare product. No circuit patent licenses nor indemnity are expressed or implied. Clare reserves the right to change the specification and circuitry, without notice at any time. The products described in this document are not intended for use in medical implantation or other direct life support applications where malfunction may result in direct physical harm, injury or death to a person. Specification: DS-PLA140-R5 ©Copyright 2001, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 4/3/01