PLA160 Single Pole OptoMOS® Relay Load Voltage Load Current Max RON PLA160 300 50 100 Description PLA160 is a 300V, 50mA, 100Ω 1-Form-A relay. This performance leader features the fastest switching speed (50us) available in an OptoMOS relay. Units V mA Ω Features • Small 6 Pin SOP Package • Low Drive Power Requirements (TTL/CMOS Compatible) • No Moving Parts • High Reliability • Arc-Free With No Snubbing Circuits • 1500VRMS Input/Output Isolation • FCC Compatible • No EMI/RFI Generation • Machine Insertable, Wave Solderable • Tape & Reel Version Available Approvals • UL/C-UL Recognized Component File #: E76270 • BSI Certified - Certificate #: 8416 Ordering Information Applications • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Medical Equipment—Patient/Equipment Isolation • Security Systems • Aerospace • Industrial Controls • Reed Relay Replacement Part # PLA160 PLA160S PLA160STR Description 6 Pin DIP (50/Tube) 6 Pin Surface Mount (50/Tube) 6 Pin Surface Mount (1000/Reel) Pin Configuration PLA160 Pinout PLA160 Pinout AC/DC Configuration DC Only Configuration + Control – Control Do Not Use 1 6 2 5 3 4 + Control Load – Control Do Not Use Do Not Use Load 1 6 2 5 3 4 + Load – Load Switching Characteristics of Normally Open (Form A) Devices 10ms CONTROL + 90% LOAD 10%+ 10%+ TON DS-PLA160-R3 www.clare.com TOFF 1 PLA160 Absolute Maximum Ratings (@ 25˚ C) Parameter Min Input Power Dissipation - - 1501 mW Input Control Current Peak (10ms) - - 50 1 mA A Reverse Input Voltage - - 5 V Total Power Dissipation - - 8002 mW Isolation Voltage Input to Output 3750 - - VRMS Operational Temperature -40 - +85 °C Storage Temperature -40 - +125 °C - - +260 +220 °C °C Soldering Temperature DIP Package Surface Mount Package (10 Seconds Max.) 1 Derate Linearly 1.33 mw/˚C 2 Derate Linearly 6.67 mw/˚C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Typ Max Units Electrical Characteristics Parameter Conditions Symbol Min Typ Max Units Load Voltage (Peak) - VL - - 300 V Load Current (Continuous) AC/DC Configuration DC Configuration - IL IL - - 50 80 mA mA 10ms ILPK - - 200 mA IL=50mA IL=80mA RON - 60 15 100 30 Ω Ω VL=300V VL=100V ILEAK ILEAK - 1 25 10 nA nA Switching Speeds Turn-On Turn-Off IF=10mA, VL=10V IF=10mA, VL=10V TON TOFF - 25 25 50 50 µS µS Output Capacitance 50V; f=1MHz COUT - 3 - pF - - - 3 - pF Input Control Current IL=50mA IF 10 - 50 mA Input Dropout Current - IF 0.4 0.7 - mA Output Characteristics @ 25°C Peak Load Current On-Resistance AC/DC Configuration DC Configuration Off-State Leakage Current Capacitance Input to Output Input Characteristics @ 25°C Input Voltage Drop IF=10mA VF 1.8 2.4 2.8 V Reverse Input Voltage - VR - - 5 V Reverse Input Current VR=5V IR - - 10 µA Input to Output Capacitance - CI/O - 3 - pF Input to Output Isolation - VI/O 3750 - - VRMS Common Characteristics @ 25°C 2 www.clare.com Rev. 3 PLA160 PERFORMANCE DATA* PLA160 Typical On-Resistance Distribution (N=50 Ambient Temperature = 25°C) (Load Current = 50mADC; IF = 10mADC) 35 30 30 25 20 15 10 16 25 20 15 10 2.34 2.38 2.42 2.46 12 10 8 6 4 0 60 2.50 61 62 63 64 335 65 25 15 10 20 15 10 5 5 0 0 1.5 1.7 20 15 10 5 1.1 1.3 1.5 1.7 0 0.025 0.035 80 0.07 70 0.06 60 50 20mA 10mA 5mA 40 30 20 0.040 -20 0 20 40 60 80 100 PLA160 Typical Blocking Voltage vs. Temperature PLA160 Typical Turn-On vs. Temperature (Load Current = 50mADC) Turn-On (ms) 365 360 355 350 345 0.05 0.04 0.03 0.02 -40 120 0.12 0.14 0.10 0.12 0.08 10mA 0.06 20mA 0.04 -20 0 20 40 60 80 100 PLA160 Typical Turn-Off vs. Temperature (Load Current = 50mADC) 0.02 340 0.050 Temperature (°C) Temperature (°C) 370 0.045 0 -40 375 0.040 0.01 Turn-Off (ms) 380 0.035 PLA160 Typical Leakage vs. Temperature (Measured across Pins 4 & 6) Turn-Off (ms) 0.030 0.030 Turn-On (ms) 0 0.025 10 1.9 10 0.020 15 PLA160 Typical Load Current vs. Temperature Load Current (mA) 25 0.015 20 LED Current (mA) 30 365 0 0.9 1.9 LED Current (mA) PLA160 Typical Turn-Off Time (N=50 Ambient Temperature = 25°C) (Load Current = 50mADC; IF = 10mADC) 360 355 5 Leakage (µA) 1.3 Device Count (N) 30 25 Device Count (N) 30 25 20 350 PLA160 Typical Turn-On Time (N=50 Ambient Temperature = 25°C) (Load Current = 50mADC; IF = 10mADC) 30 1.1 345 Blocking Voltage (V) PLA160 Typical IF for Switch Dropout (N=50 Ambient Temperature = 25°C) (Load Current = 50mADC ) PLA160 Typical IF for Switch Operation (N=50 Ambient Temperature = 25°C) (Load Current = 50mADC) 0.9 340 On-Resistance (Ω) LED Forward Voltage Drop (V) Device Count (N) 14 2 0 0 Device Count (N) 18 5 5 Blocking Voltage (VRMS) PLA160 Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25°C) Device Count (N) 35 Device Count (N) Device Count (N) PLA160 Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25°C) 0.10 0.08 0.06 0.04 0.02 10mA 335 0 0 -40 -20 0 20 40 60 Temperature (°C) 80 100 -40 -20 0 20 40 60 80 Temperature (°C) 100 -40 -20 0 20 40 60 80 100 Temperature (°C) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. 3 www.clare.com 3 PLA160 PERFORMANCE DATA* PLA160 Typical Turn-On vs. LED Forward Current (Load Current = 50mADC) PLA160 Typical LED Forward Voltage Drop vs. Temperature 2.8 50mA 30mA 20mA 10mA 5mA 2.4 2.0 0.032 0.040 0.031 0.035 0.030 0.025 0.020 0.015 -20 0 20 40 60 80 100 0 120 0.028 0.027 5 10 15 20 25 30 35 40 45 50 0 10 15 20 25 30 35 40 45 LED Forward Current (mA) LED Forward Current (mA) PLA160 Typical On-Resistance vs. Temperature (Load Current = 50mADC; IF = 10mADC) PLA160 Typical IF for Switch Operation vs. Temperature (Load Current = 50mADC) PLA160 Typical IF for Switch Dropout vs. Temperature (Load Current = 50mA) 6 6 70 5 5 LED Current (mA) 80 60 50 40 30 4 3 2 20 1 10 0 -20 0 20 40 60 80 -20 0 20 40 60 80 100 Temperature (°C) PLA160 Typical Load Current vs. Load Voltage (Ambient Temperature = 25°C) IF = 10mADC 50 4 3 2 1 -40 100 Temperature (°C) 0 -40 -20 0 20 40 60 80 100 Temperature (°C) PLA160 Energy Rating Curve 0.45 0.40 Load Current (A) 50 40 30 20 10 0 -10 -20 -30 -40 -50 5 Temperature (°C) -40 Load Current (mA) 0.029 0.025 0.005 -40 0.030 0.026 0.010 1.6 On-Resistance (Ω) 0.045 Turn-Off (ms) Turn-On (ms) 3.2 LED Current (mA) LED Forward Voltage Drop (V) 3.6 PLA160 Typical Turn-Off vs.LED Forward Current (Load Current = 50mADC) 0.35 0.30 0.25 0.20 0.15 0.10 0.05 -3 -2 -1 0 1 Load Voltage (V) 2 3 0 10µs 100µs 1ms 10ms 100ms 1s 10s 100s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com Rev. 3 PLA160 Mechanical Dimensions 8.382 ± .635 (.330 ± .025) 6 Pin DIP Surface Mount (“S” Suffix) 2.540 ± .127 (.100 ± .005) 7.620 ± .254 (.300 ± .010) 4.445 ± .127 (.175 ± .005) 8.305 ± .127 (.327 ± .005) 1.905 ± .127 (.075 ± .005) .254 TYP. (.010) .457 ± .076 (.018 ± .003) 1.499 ± .127 (.059 ± .005) 8.382 ± .635 (.330 ± .025) 6 Pin DIP Through Hole (Standard) PC Board Pattern (Top View) 2.540 ± .127 (.100 ± .005) 7.620 ± .254 (.300 ± .010) 7.239 TYP. (.285) (.100 ± .005) 9.525 ± .254 (.375 ± .010) 6.350 ± .127 (.250 ± .005) 3.302 (.130) .635 TYP. (.025) PC Board Pattern (Top View) 2.540 ± .127 3.302 (.130) 6.350 ± .127 (.250 ± .005) 9.144 ± .508 (.360 ± .020) 6-.800 DIA. (6-.031 DIA.) 2.540 ± .127 (.100 ± .005) 7.620 ± .127 (.300 ± .005) 6.350 ± .127 (.250 ± .005) 9.144 (.360) 5.080 ± .127 (.200 ± .005) .457 ± .076 (.018 ± .003) Tape and Reel Packaging for 6 Pin Surface Mount Package 330.2 DIA. (13.00) Top Cover Tape Thickness .102 MAX. (.004) 6.731 MAX. 1.753 ± .102 (.265) (.069 ± .004) .406 MAX. (.016) 2.007 ± .102 1.498 ± .102 3.987 ± .102 (.079 ± .004) (.059 ± .004) (.157 ± .004) 7.493 ± .102 (.295 ± .004) 1 6 12.090 (.476) 10.100 (.398) 4.877 (.192) Top Cover Tape Embossed Carrier 16.002 ± .305 (.630 ± .012) .050R TYP. 11.989 ± .102 (.472 ± .004) 10.100 ± .102 (.398 ± .004) 1.549 ± .102 (.061 ± .004) User Direction of Feed Embossment Dimensions mm (inches) Rev. 3 www.clare.com 5 Worldwide Sales Offices CLARE LOCATIONS EUROPE ASIA PACIFIC Clare Headquarters 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE European Headquarters CP Clare nv Bampslaan 17 B-3500 Hasselt (Belgium) Tel: 32-11-300868 Fax: 32-11-300890 Clare Micronix Division 145 Columbia Aliso Viejo, CA 92656-1490 Tel: 1-949-831-4622 Fax: 1-949-831-4628 France Clare France Sales Lead Rep 99 route de Versailles 91160 Champlan France Tel: 33 1 69 79 93 50 Fax: 33 1 69 79 93 59 Asian Headquarters Clare Room N1016, Chia-Hsin, Bldg II, 10F, No. 96, Sec. 2 Chung Shan North Road Taipei, Taiwan R.O.C. Tel: 886-2-2523-6368 Fax: 886-2-2523-6369 SALES OFFICES AMERICAS Americas Headquarters Clare 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Eastern Region Clare P.O. Box 856 Mahwah, NJ 07430 Tel: 1-201-236-0101 Fax: 1-201-236-8685 Toll Free: 1-800-27-CLARE Central Region Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Western Region Clare 1852 West 11th Street, #348 Tracy, CA 95376 Tel: 1-209-832-4367 Fax: 1-209-832-4732 Toll Free: 1-800-27-CLARE Canada Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Germany Clare Germany Sales ActiveComp Electronic GmbH Mitterstrasse 12 85077 Manching Germany Tel: 49 8459 3214 10 Fax: 49 8459 3214 29 Italy C.L.A.R.E.s.a.s. Via C. Colombo 10/A I-20066 Melzo (Milano) Tel: 39-02-95737160 Fax: 39-02-95738829 Sweden Clare Sales Comptronic AB Box 167 S-16329 Spånga Tel: 46-862-10370 Fax: 46-862-10371 United Kingdom Clare UK Sales Marco Polo House Cook Way Bindon Road Taunton UK-Somerset TA2 6BG Tel: 44-1-823 352541 Fax: 44-1-823 352797 http://www.clare.com Clare cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in this Clare product. No circuit patent licenses nor indemnity are expressed or implied. Clare reserves the right to change the specification and circuitry, without notice at any time. The products described in this document are not intended for use in medical implantation or other direct life support applications where malfunction may result in direct physical harm, injury or death to a person. Specification: DS-PLA160-R3 ©Copyright 2000, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 2/22/01