DESCRIPTION BY APPD DATE G REVISED PER ECR-ER040786 2. MATERIAL SPECIFICATIONS: BODY, FERRULE: BRASS PER ASTM B16. OUTER CONTACT & CENTER CONTACT: BERYLLIUM COPPER, ASTM B196. INSULATOR: TEFLON PER ASTM D171. 3. FINISH SPECIFICATIONS: BODY: .000100 MIN NICKEL PER AMS-QQ-N-290 OVER COPPER FLASH PER ASTM B734 (RoHS). OUTER CONTACT & CENTER CONTACT: .000030 MIN GOLD PER ASTM B488 OVER .000080 MIN NICKEL PER AMS-QQ-N-290 (RoHS). FERRULE: .000050 MIN NICKEL PER AMS-QQ-N-290 OVER .000050 MIN COPPER FLASH PER ASTM B734 (RoHS). P/N 0345-E00-C7202N 0345-E00-C7202NU DESCRIPTION SINGLE PACK BULK PACK CY REV BB 03/09/12 NOTES: UNLESS OTHERWISE SPECIFIED 1. DESIGNED FOR USE WITH BELDEN 1855A, GEPCO VDM230 OR EQUIVALENT CABLE. QTY 1 400 4. ELECTRICAL SPECIFICATIONS: IMPEDANCE: 75 OHMS FREQUENCY RANGE: DC - 6.0 GHz RETURN LOSS(MATED PAIR): <-25 dB UP TO 3.0GHz <-20 dB UP TO 6.0 GHz 5. COMPLIANT TO SMPTE 424M (3G-SDI) STANDARD. 6. FERRULE AND CONTACT SHIPPED LOOSE. 7. INTERFACE PER CECC 22230. 8. CAP-E03. .472 11.99 TO TIP OF CABLE INNER CONDUCTOR 9. CRIMP FERRULE (.178 HEX) AND CONTACT (.042 HEX) USING KTH-2025. .215 5.46 .315 8.00 .183 4.66 .026 .67 .500 12.70 .105 2.67 1.287 32.69 WHEN ASSEMBLED CATALOG P/N: 0345-E00-C7202N .625 15.88 .327 8.31 .150 3.81 RECOMMENDED CABLE TRIM DIMENSIONS DMF026 B PER ASME Y14.5M-1994 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES [MM] TOLERANCES: DECIMAL: .XX [X.X] ± .01 [0.3] .XXX [X.XX] ± .005 [0.13] .XXXX [X.XXX] ± .XXXX ANGLES: ± 2° SCALE: X:X THIRD ANGLE CUSTOMER SALES DRAWING DRAWN RF APPROVED M. AYUB DATE APPROVED 09/29/08 DCam DATE APPROVED 10/1/08 B. LARSEN DATE 10/1/08 DATE 10/1/08 Winchester Electronics Corporation 62 Barnes Industrial Road North Wallingford, Connecticut 06492 DIN 1.0/2.3 75 OHM PLUG (CRIMP/CRIMP) FOR BELDEN 1855A, GEPCO VDM230 CABLE OR EQUIVALENT (RoHS COMPLIANT) A SD0345-E00-C7202N SHT 1 OF 1 REV G