56.8mm (2.3 INCH) 16 SEGMENT SINGLE DIGIT ALPHANUMERIC DISPLAY Part Number: PSA23-11GWA GREEN Description Features 2.3 INCH CHARACTER HEIGHT. The Green source color devices are made with LOW CURRENT OPERATION. Gallium Phosphide Green Light Emitting Diode. HIGH CONTRAST AND LIGHT OUTPUT. EASY MOUNTING ON P.C. BOARDS OR SOCKETS. MECHANICALLY RUGGED. STANDARD : GRAY FACE, WHITE SEGMENT. RoHS COMPLIANT. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO: DSAD2412 REV NO: V.9 DATE:JUN/01/2007 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN:Z.Z.YANG ERP: 1311000080 Selection Guide Dice Part No. PSA23-11GWA Iv (ucd) [1] @ 10mA Lens Type GREEN (GaP) WHITE DIFFUSED Description Min. Typ. 1900 10500 Common Anode, Rt. Hand Decimal. Note: 1. Luminous Intensity/ Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max. Units Test Conditions λpeak Peak Wavelength Green 565 nm IF=20mA λD[1] Dominant Wavelength Green 568 nm IF=20mA Δλ1/2 Spectral Line Half-width Green 30 nm IF=20mA Capacitance Green 15 pF VF=0V;f=1MHz C A1,A2,D1,D2,P,K VF[2] Forward Voltage 4.4 B,C,E,F,G,H,J,L,M,N 5.0 Green DP V 2.2 2.5 A1,A2,D1,D2,P,K IR Reverse Current B,C,E,F,G,H,J,L,M,N IF=20mA 10 20 10 Green DP uA VR = 10V VR = 10V VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter A1,A2,D1,D2,P,K Power dissipation B,C,E,F,G,H,J,L,M,N DP A1,A2,D1,D2,P,K DC Forward Current B,C,E,F,G,H,J,L,M,N DP A1,A2,D1,D2,P,K Peak Forward Current [1] B,C,E,F,G,H,J,L,M,N DP A1,A2,D1,D2,P,K Reverse Voltage B,C,E,F,G,H,J,L,M,N Green Units 125 250 62.5 mW 25 50 25 mA 140 280 140 mA 10 10 5 V DP Operating / Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAD2412 REV NO: V.9 DATE:JUN/01/2007 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN:Z.Z.YANG ERP: 1311000080 Green PSA23-11GWA Note:the curves are on the DP. SPEC NO: DSAD2412 REV NO: V.9 DATE:JUN/01/2007 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN:Z.Z.YANG ERP: 1311000080 Note:the curves are on the segment b,c,e,f,g,h,j,l,m,n. SPEC NO: DSAD2412 REV NO: V.9 DATE:JUN/01/2007 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN:Z.Z.YANG ERP: 1311000080 Note:the curves are on the segment a1,a2,d1,d2,p,k. SPEC NO: DSAD2412 REV NO: V.9 DATE:JUN/01/2007 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN:Z.Z.YANG ERP: 1311000080 PACKING & LABEL SPECIFICATIONS PSA23-11GWA SPEC NO: DSAD2412 REV NO: V.9 DATE:JUN/01/2007 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN:Z.Z.YANG ERP: 1311000080