SHIELDED SMD POWER INDUCTOR PX15022S SERIES • RoHS Compliant Product • Operating Temperature: -40°C to +85°C • Inductance test @ 100KHz, 0.1VRMS @ 0ADC • Add -M for inductance tolerance ±20% after the part no. Optional inductance tolerance subject to request. • IDC: 10% inductance drop typical from its initial value at IDC • IRMS: ∆40°C temperature rise max at IRMS ELECTRICAL SPECIFICATION @ 25°C PART NUMBER L (µH) ±20% IDC (A) 102 222 332 472 562 103 153 223 333 473 683 104 154 224 334 474 684 105 1.0 2.2 3.3 4.7 5.6 10 15 22 33 47 68 100 150 220 330 470 680 1000 18.0 14.0 12.5 11.5 10.8 8.0 7.0 6.0 5.0 4.0 3.0 2.4 2.1 1.9 1.1 1.1 0.96 0.80 PX15022S- 0.6 [15.24] max. 0.10 [2.54] 0.50 [12.70] 0.6 [15.24] max. S 0.11 [2.79] F Suggested Pad Layout 0.49 [12.45] Product performance is limited to specified parameter. Data is subject to change without prior notice. 0.12 13200 Estrella Ave., Bldg. B [2.92] Gardena, CA 90248 0.50 [12.70] Schematic Schematic 0.49 [12.45] 0.12 [2.92] 0.50 [12.70] 0.30 [7.62] max. 0.10 [2.54] 0.30 [7.62] max. 0.10 0.10 Dimensions [2.54]otherwise specified, all tolerances [2.54] are: Unless inch: .XX : ± 0.015 .XXX : ±0.010 mm: X,X : ± 0,38 X,XX : ±0,25 6.5 5.0 4.7 4.4 4.1 3.9 3.4 3.1 2.8 2.4 2.0 1.7 1.3 1.1 0.50 0.86[12.70] 0.73 0.64 0.53 0.730 [18.50] max. Mechanical 0.730 [18.50] max. RDC MAX (W) 0.016 0.023 0.026 0.028 0.030 0.040 0.048 0.059 0.075 0.097 0.138 0.207 0.293 0.470 0.780 1.08 1.40 2.01 IRMS (A) 0.11 [2.79] Suggested Pad Layout Tel: (310) 325-1043 Fax: (310) 325-1044 PX15022S-XX 0602JW www.mpsind.com [email protected]