TI REF5025AQDRQ1

REF5020-Q1, REF5025-Q1, REF5030-Q1
REF5040-Q1, REF5045-Q1, REF5050-Q1
www.ti.com ............................................................................................................................................... SBOS456B – SEPTEMBER 2008 – REVISED APRIL 2009
LOW NOISE, VERY LOW DRIFT, PRECISION VOLTAGE REFERENCE
FEATURES
DESCRIPTION
1
• Qualified for Automotive Applications
• Low Temperature Drift
– High Grade: 3 ppm/°C (max)
– Standard Grade: 8 ppm/°C (max)
• High Accuracy
– High Grade: 0.05% (max)
– Standard Grade: 0.1% (max)
• Low Noise: 3 µVPP/V
• High Output Current: ±10 mA
• Temperature Range: –40°C to 125°C
The REF50xx is a family of low-noise, low-drift, very
high precision voltage references. These references
are capable of both sinking and sourcing, and are
very robust with regard to line and load changes.
2
Excellent temperature drift (3 ppm/°C) and high
accuracy (0.05%) are achieved using proprietary
design techniques. These features combined with
very low noise make the REF50xx family ideal for use
in high-precision data acquisition systems.
Each reference voltage is available in both standardand high-grade versions. They are offered in SO-8
packages and are specified from –40°C to 125°C.
APPLICATIONS
•
•
•
•
•
•
REF50xx Family
16-Bit Data Acquisition Systems
ATE Equipment
Industrial Process Control
Medical Instrumentation
Optical Control Systems
Precision Instrumentation
5V
Input
Signal
0 V to 4 V
MODEL
OUTPUT VOLTAGE
REF5020
2.048 V
REF5025
2.5 V
REF5030
3V
REF5040
4.096 V
REF5045
4.5 V
REF5050
5V
5V
R1
50 W
VDD
+IN
OPA365
ADS8326
C1
1.2 nF
-IN
REF
GND
SO-8 (D) PACKAGE
(TOP VIEW)
DNC
1
8
DNC
VIN
2
7
NC
TEMP
3
6
VOUT
GND
4
5
TRIM/NR
REF5040
+5 V
CBYPASS
1 mF
VIN
GND
VOUT
C2
22 mF
DNC = Do not connect
NC = No internal connection
1
2
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2008–2009, Texas Instruments Incorporated
REF5020-Q1, REF5025-Q1, REF5030-Q1
REF5040-Q1, REF5045-Q1, REF5050-Q1
SBOS456B – SEPTEMBER 2008 – REVISED APRIL 2009 ............................................................................................................................................... www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
PACKAGE/ORDERING INFORMATION (1) (2)
PRODUCT
OUTPUT VOLTAGE
PACKAGE-LEAD
PACKAGE DESIGNATOR
PACKAGE MARKING
REF5020A
2.048 V
SO-8
D
RFQ5020
REF5025A
2.5 V
SO-8
D
RFQ5025
REF5030A
3.0 V
SO-8
D
PREVIEW
REF5040A
4.096 V
SO-8
D
PREVIEW
REF5045A
4.5 V
SO-8
D
RFQ5045
REF5050A
5.0 V
SO-8
D
PREVIEW
REF5020I
2.048 V
SO-8
D
RFQ5020
REF5025I
2.5 V
SO-8
D
PREVIEW
REF5030I
3.0 V
SO-8
D
PREVIEW
REF5040I
4.096 V
SO-8
D
PREVIEW
REF5045I
4.5 V
SO-8
D
PREVIEW
REF5050I
5.0 V
SO-8
D
PREVIEW
STANDARD GRADE (8 ppm, 0.1%)
HIGH GRADE (3 ppm, 0.05%)
(1)
(2)
For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
ABSOLUTE MAXIMUM RATINGS (1)
PARAMETER
REF50xx
Input Voltage
+18
V
Output Short-Circuit
30
mA
Operating Temperature Range
–55 to +125
°C
Storage Temperature Range
–65 to +150
°C
+150
°C
Human Body Model (HBM)
3000
V
Charged Device Model (CDM)
1000
V
Junction Temperature (TJ max)
ESD Rating
(1)
2
UNIT
Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may
degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond
those specified is not implied.
Submit Documentation Feedback
Copyright © 2008–2009, Texas Instruments Incorporated
REF5020-Q1, REF5025-Q1, REF5030-Q1
REF5040-Q1, REF5045-Q1, REF5050-Q1
www.ti.com ............................................................................................................................................... SBOS456B – SEPTEMBER 2008 – REVISED APRIL 2009
ELECTRICAL CHARACTERISTICS: PER DEVICE
Boldface limits apply over the specified temperature range, TA = –40°C to 125°C.
TA = 25°C, ILOAD = 0, CL = 1 µF, VIN = (VOUT + 0.2 V) to 18 V (unless otherwise noted).
PER DEVICE
PARAMETER
CONDITIONS
MIN
TYP
MAX
UNIT
REF5020 (VOUT = 2.048 V) (1)
OUTPUT VOLTAGE
Output voltage
Initial accuracy:
VOUT
2.7 V < VIN < 18 V
2.048
V
High grade
–0.05
0.05
%
Standard grade
–0.1
0.1
%
NOISE
Output voltage noise
f = 0.1 Hz to 10 Hz
µVPP
6
REF5025 (VOUT = 2.5 V)
OUTPUT VOLTAGE
Output voltage
Initial accuracy:
VOUT
2.5
V
High grade
–0.05
0.05
%
Standard grade
–0.1
0.1
%
NOISE
Output Voltage Noise
f = 0.1 Hz to 10 Hz
µVPP
7.5
REF5030 (VOUT = 3 V)
OUTPUT VOLTAGE
Output voltage
Initial accuracy:
VOUT
3.0
V
High grade
–0.05
0.05
%
Standard grade
–0.1
0.1
%
NOISE
Output voltage noise
f = 0.1 Hz to 10 Hz
µVPP
9
REF5040 (VOUT = 4.096 V)
OUTPUT VOLTAGE
Output voltage
Initial accuracy:
VOUT
4.096
V
High grade
–0.05
0.05
%
Standard grade
–0.1
0.1
%
NOISE
Output voltage noise
f = 0.1 Hz to 10 Hz
µVPP
12
REF5045 (VOUT = 4.5 V)
OUTPUT VOLTAGE
Output voltage
Initial accuracy:
VOUT
4.5
V
High grade
–0.05
0.05
%
Standard grade
–0.1
0.1
%
NOISE
Output voltage noise
f = 0.1 Hz to 10 Hz
µVPP
13.5
REF5050 (VOUT = 5 V)
OUTPUT VOLTAGE
Output voltage
Initial accuracy:
VOUT
5.0
V
High grade
–0.05
0.05
%
Standard grade
–0.1
0.1
%
NOISE
Output voltage noise
(1)
f = 0.1 Hz to 10 Hz
15
µVPP
For VOUT ≤ 2.5 V, the minimum supply voltage is 2.7 V.
Copyright © 2008–2009, Texas Instruments Incorporated
Submit Documentation Feedback
3
REF5020-Q1, REF5025-Q1, REF5030-Q1
REF5040-Q1, REF5045-Q1, REF5050-Q1
SBOS456B – SEPTEMBER 2008 – REVISED APRIL 2009 ............................................................................................................................................... www.ti.com
ELECTRICAL CHARACTERISTICS: ALL DEVICES
Boldface limits apply over the specified temperature range, TA = –40°C to 125°C.
TA = 25°C, ILOAD = 0, CL = 1 µF, VIN = (VOUT + 0.2 V) to 18 V (unless otherwise noted).
REF50xx
PARAMETER
CONDITIONS
MIN
TYP
MAX
UNIT
2.5
3
ppm/°C
3
8
ppm/°C
ppm/V
OUTPUT VOLTAGE TEMPERATURE DRIFT
Output voltage temperature drift
dVOUT/dT
High grade
Standard grade
LINE REGULATION
Line regulation
dVOUT/dVIN
REF5020 (1) only
VIN = 2.7 V to 18 V
0.1
1
All other devices
VIN = VOUT + 0.2 V
0.1
1
ppm/V
0.2
1
ppm/V
VIN = 3 V
20
30
ppm/mA
VIN = VOUT + 0.75 V
20
30
ppm/mA
50
ppm/mA
Over temperature
LOAD REGULATION
Load regulation
dVOUT/dILOAD
REF5020 Only
All other devices
–10 mA < ILOAD < +10 mA
Over temperature
SHORT-CIRCUIT CURRENT
Short-circuit current
ISC
VOUT = 0
25
mA
TEMP PIN
Voltage output
At TA = 25°C
Temperature sensitivity
575
mV
2.64
mV/°C
200
µs
TURN-ON SETTLING TIME
To 0.1% with CL = 1 µF
Turn-on settling time
POWER SUPPLY
Supply voltage
VS
See Note
(1)
VOUT + 0.2 (1)
Quiescent current
0.8
Over temperature
18
V
1
mA
1.2
mA
TEMPERATURE RANGE
Specified range
–40
125
°C
Operating range
–55
125
°C
Thermal resistance
θJA
SO-8
(1)
4
150
°C/W
For VOUT ≤ 2.5 V, the minimal supply voltage is 2.7 V.
Submit Documentation Feedback
Copyright © 2008–2009, Texas Instruments Incorporated
REF5020-Q1, REF5025-Q1, REF5030-Q1
REF5040-Q1, REF5045-Q1, REF5050-Q1
www.ti.com ............................................................................................................................................... SBOS456B – SEPTEMBER 2008 – REVISED APRIL 2009
TYPICAL CHARACTERISTICS
TA = 25°C, ILOAD = 0, VS = VOUT + 0.2 V (unless otherwise noted). For VOUT ≤ 2.5 V, the minimum supply voltage is 2.7 V.
TEMPERATURE DRIFT
(–40°C to 125°C)
Drift (ppm/°C)
Drift (ppm/°C)
Figure 1.
Figure 2.
OUTPUT VOLTAGE
INITIAL ACCURACY
OUTPUT VOLTAGE ACCURACY
vs TEMPERATURE
7.50
8.00
6.50
7.00
5.50
6.00
4.50
5.00
3.50
4.00
2.50
3.00
1.50
2.00
0.50
1.00
0
0.25
0.50
0.75
1.00
1.25
1.50
1.75
2.00
2.25
2.50
2.75
3.00
3.25
3.50
3.75
4.00
4.25
4.50
4.75
5.00
0
Population (%)
Population (%)
TEMPERATURE DRIFT
(0°C to 85°C)
0.05
Population (%)
Output Voltage Accuracy (%)
0.04
0.03
0.02
0.01
0
-0.01
-0.02
-0.03
-0.05
0.05
0.04
0.03
0.02
0.01
0
-0.01
-0.02
-0.03
-0.04
-0.05
-0.04
-50
-25
Output Initial Accuracy (%)
Figure 3.
25
50
Temperature (°C)
75
100
125
Figure 4.
POWER-SUPPLY REJECTION RATIO
vs FREQUENCY
DROPOUT VOLTAGE vs LOAD CURRENT
160
0.8
140
0.7
120
0.6
Dropout Voltage (V)
PSRR (dB)
0
100
80
60
40
20
+125°C
+25°C
0.5
-40°C
0.4
0.3
0.2
0.1
0
0
10
100
1k
Frequency (Hz)
10k
Figure 5.
Copyright © 2008–2009, Texas Instruments Incorporated
100k
-15
-10
-5
0
5
Load Current (mA)
10
15
Figure 6.
Submit Documentation Feedback
5
REF5020-Q1, REF5025-Q1, REF5030-Q1
REF5040-Q1, REF5045-Q1, REF5050-Q1
SBOS456B – SEPTEMBER 2008 – REVISED APRIL 2009 ............................................................................................................................................... www.ti.com
TYPICAL CHARACTERISTICS (continued)
TA = 25°C, ILOAD = 0, VS = VOUT + 0.2 V (unless otherwise noted). For VOUT ≤ 2.5 V, the minimum supply voltage is 2.7 V.
REF5025 OUTPUT VOLTAGE
vs LOAD CURRENT
TEMP PIN OUTPUT VOLTAGE
vs TEMPERATURE
0.9
2.50125
TEMP Pin Output Voltage (V)
2.50100
Output Voltage (V)
2.50075
2.50050
2.50025
+25°C
2.50000
2.49975
2.49950
-40°C
2.49925
+125°C
2.49900
-5
0
Load Current (mA)
5
0.6
0.5
0.4
10
-50
0
-25
25
50
Temperature (°C)
75
Figure 7.
Figure 8.
QUIESCENT CURRENT
vs TEMPERATURE
QUIESCENT CURRENT
vs INPUT VOLTAGE
1050
1000
1000
950
100
125
+125°C
950
900
900
850
IQ (mA)
Quiescent Current (mA)
-10
850
800
+25°C
800
750
750
700
700
650
650
600
-40°C
600
-50
-25
0
25
50
Temperature (°C)
75
100
2
125
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18
VIN (V)
Figure 9.
Figure 10.
LINE REGULATION
vs TEMPERATURE
SHORT-CIRCUIT CURRENT
vs TEMPERATURE
0.5
35
0.4
Sourcing
30
Short-Circuit Current (mA)
Line Regulation (ppm/V)
0.7
0.3
2.49875
0.3
0.2
0.1
0
-0.1
-0.2
-0.3
25
20
Sinking
15
10
5
-0.4
0
-0.5
-50
-25
0
25
50
Temperature (°C)
Figure 11.
6
0.8
Submit Documentation Feedback
75
100
125
-50
-25
0
25
50
Temperature (°C)
75
100
125
Figure 12.
Copyright © 2008–2009, Texas Instruments Incorporated
REF5020-Q1, REF5025-Q1, REF5030-Q1
REF5040-Q1, REF5045-Q1, REF5050-Q1
www.ti.com ............................................................................................................................................... SBOS456B – SEPTEMBER 2008 – REVISED APRIL 2009
TYPICAL CHARACTERISTICS (continued)
TA = 25°C, ILOAD = 0, VS = VOUT + 0.2 V (unless otherwise noted). For VOUT ≤ 2.5 V, the minimum supply voltage is 2.7 V.
STARTUP
(REF5025, CL = 1 µF)
NOISE
1mV/div
VIN
2V/div
VOUT
1V/div
1s/div
40ms/div
Figure 13.
Figure 14.
STARTUP
(REF5025, CL = 10 µF)
LOAD TRANSIENT
(CL = 1 µF, IOUT = 1 mA)
+1mA
VIN
ILOAD
5V/div
-1mA
-1mA
1mA/div
VOUT
5mV/div
VOUT
1V/div
400ms/div
20ms/div
Figure 15.
Figure 16.
LOAD TRANSIENT
(CL = 1 µF, IOUT = 10 mA)
LOAD TRANSIENT
(CL = 10 µF, IOUT = 1 mA)
ILOAD
10mA/div
+1mA
+10mA
+10mA
ILOAD
-1mA
-1mA
1mA/div
-10mA
VOUT
VOUT
5mV/div
2mV/div
20ms/div
100ms/div
Figure 17.
Figure 18.
Copyright © 2008–2009, Texas Instruments Incorporated
Submit Documentation Feedback
7
REF5020-Q1, REF5025-Q1, REF5030-Q1
REF5040-Q1, REF5045-Q1, REF5050-Q1
SBOS456B – SEPTEMBER 2008 – REVISED APRIL 2009 ............................................................................................................................................... www.ti.com
TYPICAL CHARACTERISTICS (continued)
TA = 25°C, ILOAD = 0, VS = VOUT + 0.2 V (unless otherwise noted). For VOUT ≤ 2.5 V, the minimum supply voltage is 2.7 V.
LOAD TRANSIENT
(CL = 10 µF, IOUT = 10 mA)
ILOAD
10mA/div
LINE TRANSIENT
(CL = 1 µF)
+10mA
-10mA
-10mA
VIN
500mV/div
VOUT
2mV/div
VOUT
5mV/div
100ms/div
20ms/div
Figure 19.
Figure 20.
LINE TRANSIENT
(CL = 10 µF)
500mV/div
5mV/div
VIN
VOUT
100ms/div
Figure 21.
8
Submit Documentation Feedback
Copyright © 2008–2009, Texas Instruments Incorporated
REF5020-Q1, REF5025-Q1, REF5030-Q1
REF5040-Q1, REF5045-Q1, REF5050-Q1
www.ti.com ............................................................................................................................................... SBOS456B – SEPTEMBER 2008 – REVISED APRIL 2009
APPLICATION INFORMATION
The REF50xx is family of low-noise, precision
bandgap voltage references that are specifically
designed for excellent initial voltage accuracy and
drift. Figure 22 shows a simplified block diagram of
the REF50xx.
USING THE TRIM/NR PIN
VIN
REF50xx
R2
R1
aT
(10mA
at +25°C)
VOUT
R4
TEMP
aT
10kW
R3
TRIM/NR
1.2V
R5
60kW
requirement of 2.7 V, these references can be
operated with a supply of 200 mV above the output
voltage in an unloaded condition. For loaded
conditions, a typical dropout voltage versus load plot
is shown in Figure 6 of Typical Characteristics.
1kW
The REF50xx provides a very accurate voltage
output. However, VOUT can be adjusted to reduce
noise and shift the output voltage from the nominal
value by configuring the trim and noise reduction pin
(TRIM/NR, pin 5). The TRIM/NR pin provides a
±15-mV adjustment of the device bandgap, which
produces a ±15-mV change on the VOUT pin.
Figure 24 shows a typical circuit using the TRIM/NR
pin to adjust VOUT. When using this technique, the
temperature coefficients of the resistors can degrade
the temperature drift at the output.
+VSUPPLY
GND
REF50xx
DNC
Figure 22. REF50xx Simplified Block Diagram
DNC
VIN
NC
VOUT
TEMP
GND TRIM/NR
10kW
BASIC CONNECTIONS
470W
Figure 23 shows the typical connections for the
REF50xx. A supply bypass capacitor ranging
between 1 µF to 10 µF is recommended. A 1-µF to
50-µF, low-ESR output capacitor (CL) must be
connected from VOUT to GND. The ESR value should
be less than or equal to 1.5 Ω. The ESR minimizes
gain peaking of the internal 1.2-V reference and thus
reduces noise at the VOUT pin.
+VSUPPLY
REF50xx
DNC
CBYPASS
1mF to 10mF
VIN
TEMP
DNC
NC
VOUT
GND TRIM/NR
VOUT
CL
1mF to 50mF
1kW
Figure 24. VOUT Adjustment Using TRIM/NR Pin
The REF50xx allows access to the bandgap through
the TRIM/NR pin. Placing a capacitor from the
TRIM/NR pin to GND (as Figure 25 illustrates) in
combination with the internal 1-kΩ resistor creates a
low-pass filter that lowers the overall noise measured
on the VOUT pin. A capacitance of 1 µF is suggested
for a low-pass filter with a corner frequency of
14.5 Hz. Higher capacitance results in a lower cutoff
frequency.
+VSUPPLY
REF50xx
DNC
Figure 23. Basic Connections
VIN
TEMP
SUPPLY VOLTAGE
The REF50xx family of voltage references features
extremely low dropout voltage. With the exception of
the REF5020, which has a minimum supply
Copyright © 2008–2009, Texas Instruments Incorporated
DNC
NC
VOUT
GND TRIM/NR
C1
1 mF
Figure 25. Noise Reduction Using TRIM/NR Pin
Submit Documentation Feedback
9
REF5020-Q1, REF5025-Q1, REF5030-Q1
REF5040-Q1, REF5045-Q1, REF5050-Q1
SBOS456B – SEPTEMBER 2008 – REVISED APRIL 2009 ............................................................................................................................................... www.ti.com
TEMPERATURE DRIFT
+V
The REF50xx is designed for minimal drift error,
which is defined as the change in output voltage over
temperature. The drift is calculated using the box
method, as described by the following equation:
V
Drift + ǒ
V
OUT
Ǔ
* V OUTMIN
Temp Range
OUTMAX
6
10 (ppm)
REF50xx
DNC
VTEMP
2.6mV/°C
OPA(1)
TEMP
DNC
NC
VOUT
GND TRIM/NR
(1)
The REF50xx features a maximum drift coefficient of
3 ppm/°C for the high-grade version, and 8 ppm/°C
for the standard-grade.
VIN
NOTE: (1) Low drift op amp, such as the OPA333, OPA335, or OPA376.
Figure 26. Buffering the TEMP Pin Output
TEMPERATURE MONITORING
The temperature output terminal (TEMP, pin 3)
provides a temperature-dependent voltage output
with approximately 60-kΩ source impedance. As
seen in Figure 8, the output voltage follows the
nominal relationship:
POWER DISSIPATION
VTEMP
TJ = TA + PD × θJA
PIN
= 509 mV + 2.64 × T(°C)
This pin indicates general chip temperature, accurate
to approximately ±15°C. Although it is not generally
suitable for accurate temperature measurements, it
can be used to indicate temperature changes or for
temperature compensation of analog circuitry. A
temperature change of 30°C corresponds to an
approximate 79-mV change in voltage at the TEMP
pin.
The TEMP pin has high output impedance (see
Figure 22). Loading this pin with a low-impedance
circuit induces a measurement error; however, it does
not have any effect on VOUT accuracy. To avoid
errors caused by low-impedance loading, buffer the
TEMP pin output with a suitable low-temperature drift
op amp, such as the OPA333, OPA335, or OPA376,
as shown in Figure 26.
10
Submit Documentation Feedback
The REF50xx family is specified to deliver current
loads of ±10 mA over the specified input voltage
range. The temperature of the device increases
according to the equation:
Where:
TJ = Junction temperature (°C)
TA = Ambient temperature (°C)
PD = Power dissipated (W)
θJA = Junction-to-ambient thermal resistance
(°C/W)
The REF50xx junction temperature must not exceed
the absolute maximum rating of 150°C.
NOISE PERFORMANCE
Typical 0.1-Hz to 10-Hz voltage noise for each
member of the REF50xx family is specified in the
Electrical Characteristics: Per Device table. The noise
voltage increases with output voltage and operating
temperature. Additional filtering can be used to
improve output noise levels, although care should be
taken to ensure the output impedance does not
degrade performance.
Copyright © 2008–2009, Texas Instruments Incorporated
REF5020-Q1, REF5025-Q1, REF5030-Q1
REF5040-Q1, REF5045-Q1, REF5050-Q1
www.ti.com ............................................................................................................................................... SBOS456B – SEPTEMBER 2008 – REVISED APRIL 2009
APPLICATION CIRCUITS
NEGATIVE REFERENCE VOLTAGE
DATA ACQUISITION
For applications requiring a negative and positive
reference voltage, the REF50xx and OPA735 can be
used to provide a dual-supply reference from a 5-V
supply. Figure 27 shows the REF5025 used to
provide a 2.5-V supply reference voltage. The low
drift performance of the REF50xx complements the
low offset voltage and zero drift of the OPA735 to
provide an accurate solution for split-supply
applications. Care must be taken to match the
temperature coefficients of R1 and R2.
Data acquisition systems often require stable voltage
references to maintain accuracy. The REF50xx family
features low noise, very low drift, and high initial
accuracy for high-performance data converters.
Figure 28 shows the REF5040 in a basic data
acquisition system.
+5V
Input
Signal
0V to 4V
+5V
R1
50W
ADS8326
C1
1.2nF
+5V
VDD
+IN
OPA365
-IN
REF
GND
REF5025
DNC
VIN
DNC
REF5040
+5V
NC
TEMP
VOUT
GND TRIM/NR
+2.5V
1m F
R1
10kW
VIN
VOUT
CBYPASS
1mF
GND
C2
22mF
R2
10kW
Figure 28. Basic Data Acquisition System
+5V
OPA735
-2.5V
-5V
NOTE: Bypass capacitors not shown.
Figure 27. The REF5025 and OPA735 Create
Positive and Negative Reference Voltages
Copyright © 2008–2009, Texas Instruments Incorporated
Submit Documentation Feedback
11
REF5020-Q1, REF5025-Q1, REF5030-Q1
REF5040-Q1, REF5045-Q1, REF5050-Q1
SBOS456B – SEPTEMBER 2008 – REVISED APRIL 2009 ............................................................................................................................................... www.ti.com
Revision History
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
Changes from Revision A (December, 2008) to Revision B .......................................................................................... Page
•
•
•
•
12
Changed Storage Temperature Range absolute minimum value from –55°C to –65°C.......................................................
Added test condition to Line regulation, All other devices specification ................................................................................
Added Load regulation test condition and Over temperature specifications .........................................................................
Added typical characteristic graph, Quiescent Current vs Input Voltage (Figure 10)............................................................
Submit Documentation Feedback
2
4
4
6
Copyright © 2008–2009, Texas Instruments Incorporated
PACKAGE OPTION ADDENDUM
www.ti.com
15-May-2010
PACKAGING INFORMATION
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
REF5020AQDRQ1
PREVIEW
SOIC
D
8
2500
TBD
Call TI
Call TI
REF5025AQDRQ1
PREVIEW
SOIC
D
8
2500
TBD
Call TI
Call TI
REF5045AQDRQ1
PREVIEW
SOIC
D
8
2500
TBD
Call TI
Call TI
Lead/Ball Finish
MSL Peak Temp (3)
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
26-Aug-2009
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
B0
(mm)
K0
(mm)
P1
(mm)
W
Pin1
(mm) Quadrant
REF5025AQDRQ1
SOIC
D
8
2500
330.0
12.4
6.4
5.2
2.1
8.0
12.0
Q1
REF5045AQDRQ1
SOIC
D
8
2500
330.0
12.4
6.4
5.2
2.1
8.0
12.0
Q1
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
26-Aug-2009
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
REF5025AQDRQ1
SOIC
D
8
2500
346.0
346.0
29.0
REF5045AQDRQ1
SOIC
D
8
2500
346.0
346.0
29.0
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Applications
Amplifiers
amplifier.ti.com
Audio
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DLP® Products
www.dlp.com
Communications and
Telecom
www.ti.com/communications
DSP
dsp.ti.com
Computers and
Peripherals
www.ti.com/computers
Clocks and Timers
www.ti.com/clocks
Consumer Electronics
www.ti.com/consumer-apps
Interface
interface.ti.com
Energy
www.ti.com/energy
Logic
logic.ti.com
Industrial
www.ti.com/industrial
Power Mgmt
power.ti.com
Medical
www.ti.com/medical
Microcontrollers
microcontroller.ti.com
Security
www.ti.com/security
RFID
www.ti-rfid.com
Space, Avionics &
Defense
www.ti.com/space-avionics-defense
RF/IF and ZigBee® Solutions www.ti.com/lprf
Video and Imaging
www.ti.com/video
Wireless
www.ti.com/wireless-apps
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2010, Texas Instruments Incorporated