NAIS RK1-L2-24V 1.5 ghz microwave relay Datasheet

1.5 GHz MICROWAVE RELAY
20.2
.795
RK-RELAYS
• Excellent high frequency characteristics
Isolation: Min. 60dB (at 1.5 GHz)
Insertion loss: Max. 0.3dB (at 900 MHz)
• V.S.W.R.: Max. 1.5 (at 900MHz)
• High sensitivity in small size
Size: 20.2 × 11.2 × 9.7 mm .795 × .441 × .382 inch
Nominal power consumption: 200 mW (single side stable type)
• Sealed construction for automatic cleaning
• Latching types are also available
11.2
.441
9.7
.382
mm inch
SPECIFICATIONS
Contact
Characteristics
Arrangement
1 Form C
Contact material
Gold-clad
Initial contact resistance, max.
(By HP4328A)
Rating
10 W
Max. switching voltage
30 V DC
Max. switching current
0.5 A
Nominal switching
capacity
High frequency Isolation
characteristics Insertion loss
(Impedance 50Ω)
V.S.W.R.
Expected
life (min.
operations)
100 mΩ
Max. switching power
Mechanical
Electrical
0.01 A 24 V DC
10 W 1.2 GHz
0.01 A 24 V DC 10 W (at
1.2 GHz, Impedance 50Ω)
Min. 60 dB (at 1.5 GHz)
Initial insulation resistance*1
Min. 100 MΩ at 500 V DC
Between open contacts
500 Vrms
Initial
Between contact and coil
breakdown
2
Between contact and
voltage*
earth terminal
1,000 Vrms
500 Vrms
Operate time [Set time]*3 (at nominal voltage)
Approx. 6 ms [Approx. 5ms]
Release time (without diode) [Reset time]*3
Approx. 3 ms [Approx. 5ms]
(at nominal voltage) *2
Max. 60°Cwith nominal coil
voltage across coil and at
nominal switching capacity
Temperature rise
Max. 0.3 dB (at 900 MHz)
Max. 1.5 (at 900 MHz)
Shock resistance
5×10
6
3×105
Min. 196 m/s2 {20 G}
Destructive*5
Min. 980 m/s2 {100 G}
10 to 55 Hz
at double amplitude of 3 mm
10 to 55 Hz
at double amplitude of 5 mm
Functional*6
Vibration
resistance
105
Functional*4
Destructive
Coil (at 25°C, 68°F)
Nominal operating power
Single side stable
200 mW
1 coil latching
200 mW
2 coil latching
400 mW
Conditions for operation,
transport and storage
Ambient temp.
(Not freezing and condensing
Humidity
at low temperature)
–40°C to 60°C
–40°F to 140°F
5 to 85% R.H.
Approx. 4.4 g .155 oz
Unit weight
Remarks
* Specifications will vary with foreign standards certification ratings.
*1 Measurement at same location as “Initial breakdown voltage” section
*2 Detection current: 10mA
*3 Excluding contact bounce time
*4 Half-wave pulse of sine wave: 11ms, detection time: 10µs
*5 Half-wave pulse of sine wave: 6ms
*6 Detection time: 10µs
TYPICAL
APPLICATIONS
• Audio visual equipment
broadcast satellite tuners
VCRs, CATVs, TVs
• Communication equipment
automobile telephones
maritime telephones
• Instrumentation
test equipment
measuring equipment
ORDERING INFORMATION
Ex. RK
1
L2
24V
Contact arrangement
Operating function
Coil voltage, DC
1: Standard type
1R: R type
(See Schematic on next page.)
Nil: Single side stable
L: 1 coil latching
L2: 2 coil latching
3, 4.5, 5, 6, 9, 12,
24 V
Note: Standard packing; Carton: 50 pcs. Case 500 pcs.
101
RK
TYPES ANE COIL DATA (at 20°C 68°F)
• Single side stable type
Part No.
RK1R-3V
RK1R-4.5V
RK1R-5V
RK1R-6V
RK1R-9V
RK1R-12V
RK1R-24V
RK1-3V
RK1-4.5V
RK1-5V
RK1-6V
RK1-9V
RK1-12V
RK1-24V
Nominal
voltage,
V DC
3
4.5
5
6
9
12
24
Pick-up
voltage, max.
V DC
2.25
3.38
3.75
4.5
6.75
9
18
Drop-out
voltage, min.
V DC
0.3
0.45
0.5
0.6
0.9
1.2
2.4
Coil
resistance,
Ω (±10%)
45
101
125
180
405
720
2,880
Nominal
operating
current, mA
66.7
44.4
40.7
33.3
22.2
16.7
8.3
Nominal
operating
power, mW
200
200
200
200
200
200
200
Maximum.
allowable
voltage, V DC
(at 60°C 140°F)
Nominal
voltage,
V DC
3
4.5
5
6
9
12
24
Set
voltage, max.
V DC
2.25
3.38
3.75
4.5
6.75
9
18
Reset
voltage, max.
V DC
2.25
3.38
3.75
4.5
6.75
9
18
Coil
resistance,
Ω (±10%)
45
101
125
180
405
720
2,880
Nominal
operating
current, mA
66.7
44.4
40
33.3
22.2
16.7
8.3
Nominal
operating
power, mW
200
200
200
200
200
200
200
Maximum.
allowable
voltage, V DC
(at 60°C 140°F)
Nominal
voltage,
V DC
3
4.5
5
6
9
12
24
Set
voltage, max.
V DC
2.25
3.38
3.75
4.5
6.75
9
18
Reset
voltage, max.
V DC
2.25
3.38
3.75
4.5
6.75
9
18
Coil
resistance,
Ω (±10%)
22.5
50.6
62.5
90
202.5
360
1,440
Nominal
operating
current, mA
133.3
88.9
80
66.7
44.4
33.3
16.7
Nominal
operating
power, mW
400
400
400
400
400
400
400
Maximum.
allowable
voltage, V DC
(at 60°C 140°F)
3.3
4.95
5.5
6.6
9.9
13.2
26.4
• 1 coil latching type
Part No.
RK1-L-3V
RK1-L-4.5V
RK1-L-5V
RK1-L-6V
RK1-L-9V
RK1-L-12V
RK1-L-24V
RK1R-L-3V
RK1R-L-4.5V
RK1R-L-5V
RK1R-L-6V
RK1R-L-9V
RK1R-L-12V
RK1R-L-24V
3.3
4.95
5.5
6.6
9.9
13.2
26.4
• 2 coil latching type
Part No.
RK1-L2-3V
RK1-L2-4.5V
RK1-L2-5V
RK1-L2-6V
RK1-L2-9V
RK1-L2-12V
RK1-L2-24V
RK1R-L2-3V
RK1R-L2-4.5V
RK1R-L2-5V
RK1R-L2-6V
RK1R-L2-9V
RK1R-L2-12V
RK1R-L2-24V
DIMENSIONS
3.3
4.95
5.5
6.6
9.9
13.2
26.4
mm inch
PC board pattern (Copper-side view)
(Single side stable and
1 coil latching)
9-0.9 dia.
9-.035 dia.
20.2
.795
11.2
.441
2.54
.100
2.54
.100
Schematic (Bottom view)
Standard contact arrangement
R type contact arrangement
RK1
RK1R
–1
+7 Single side
–1
+7
stable
(Deenergized
condition)
14 13 12 11 10 9
N.C.
COM
8
14 13 12 11 10 9
N.O.
N.O.
COM
8
N.C.
7.62
.300
9.1
.358
3.5
.138 0.6
.024
2.54
.100
7.62
.300
(Single side stable and
1 coil latching)
RK1-L
(2 coil latching)
10-0.9 dia.
10-.035 dia.
2-0.6×0.3
2-.024×.012
2.54
.100
3-0.45
3-.018
–7
2.54
.100
14 13 12 11 10 9
RESET
Stand-off
COM
SET
+1
–7
14 13 12 11 10 9
SET
COM
8
RESET
7.62
.300
3-0.6×0.3
3-.024×.012
Tolerance: ±0.1 ±.003
RK1-L2
1
–
Stand-off
4-0.6×0.25
4-.024×.010
General tolerance: ±0.3 ±.012
102
8
1 coil
latching
(Reset
condition)
4-0.6×0.25
4-.024×.010
(2 coil latching)
3-0.45
3-.018
RK1R-L
+1
RK1R-L2
6 7
+ +
14 13 12 11 10 9
RESET
COM
8
SET
2 coil
latching
(Reset
condition)
1
–
6 7
+ +
14 13 12 11 10 9
SET
COM
8
RESET
RK
REFERENCE DATA
1.-(1) High frequency characteristics (Impedance 75Ω)
Sample: RK1-12V
Measuring method: Measured with HP network analyzer (HP8753C)
0
• Isolation characteristics
Isolation, dB
Insertion loss, dB
0
2.0
20
1.8
COM-NO
0.2
COM-NC
0.4
0.6
• V.S.W.R. characteristics
40
V.S.W.R.
• Insertion loss characteristics
COM-NO
60
1.6
1.4
COM-NO
COM-NC
0.8
80
1.2
COM-NC
100
1.0
300kHz
1.5GHz
300kHz
3GHz
1.5GHz
Frequency
1.0
3GHz
300kHz
1.5GHz
Frequency
3GHz
Frequency
1.-(2) High frequency characteristics (Impedance 50Ω)
Sample: RK1-5V
Measuring method: Measured with HP network analyzer (HP8753C)
• Isolation characteristics
0
0
0.2
20
• V.S.W.R. characteristics
2.0
1.8
COM-NO
0.4
COM-NO
0.6
40
60
COM-NO
COM-NC
0.8
80
1.2
100
1.0
300kHz
1.6
1.4
COM-NC
1.5GHz
3GHz
300kHz
1.5GHz
Frequency
3GHz
1.0
Sample: RK1-12V, RK1-L-12V, RK1-L2-12V
No. of samples: n = 6
Carrying current: 10 mA
Ambient temperature: 25°C 77°F
1.5GHz
3.-(2) Set/Reset time (Latching)
Sample: RK1-L-12V, RK1-L2-12V
No. of samples: n = 12
Sample: RK1-12V; No. of samples: n = 6
RK1-12V,
RK1-L-12V
40
20
10
8
Operate time
6
4
Max.
Min.
Max.
2
Min.
Set/Reset time, ms
60
Operate/Reset time, ms
10
RK1-L2-12V
3GHz
Frequency
3.-(1) Operate/Release time
(Single side stable)
100
80
300kHz
Frequency
2. Coil temperature rise
Temperature rise, °C
COM-NC
V.S.W.R.
Isolation, dB
Insertion loss, dB
• Insertion loss characteristics
Set time
Reset time
8
6
4
Max.
Max.
Min.
Min.
2
Release time
0
80
100
130
150
Voltage applied to coil, %V
0
80
100
120
150
Voltage applied to coil, %V
0
80
100
130
Voltage applied to the coil (%V)
103
RK
4.-(1) Mechanical life test (Single side stable)
4.-(2) Mechanical life test (Latching)
4.-(3) Mechanical life test
Sample: RK1-12V; No. of samples: n = 12
Sample: RK1-L2-12V
No. of samples: n = 12
Sample: RK1-12V
No. of samples: n = 20 (20 × 2 contacts)
Pick-up voltage
Max.
Min.
8
6
Drop-out voltage
Max.
Min.
8
6
4
Max.
2
10
Min.
Contact resistance, mΩ
10
4
300
12
Set/Reset voltage, V
Pick-up/drop-out voltage, V
12
250
200
150
Max.
100
2
50
0
0
Min.
0
100
500 1,000
No. of operations, ×104
100
500 1,000
No. of operations, ×104
50
100
500 1,000
No. of operations, ×104
5. Electrical life test (0.01 A 24 V DC)
6. Ambient temperature characteristics
7. Contact resistance distribution (initial)
Sample: RK1-12V; No. of samples: n = 6
Sample: RK1-12V; No. of samples: n = 6
Sample: RK1-12V
No. of samples: n = 50 (50 × 2 contacts)
10
Pick-up voltage
Max.
Min.
8
6
4
–40 –20
–40 –4
Drop-out voltage
Max.
Min.
2
0
10
20
No. of operations, ×104
0
20
Drop-out voltage
20 40 60 80
68 104 140 176
–20 Ambient temperature,
°C °F
–40
0
–10
Rate of change, %
Sample: RK1-12V; No. of samples: n = 10
Rate of change, %
8.-(2) Influence of adjacent mounting
Sample: RK1-12V; No. of sample: n = 10
OFF OFF
10
0
–10
ON condition
5
10
.197
.394
Inter-relay distance, (mm, inch)
10
20
30
40
50
Contact resistance, mΩ
OFF
0
OFF
–10
OFF condition
Rate of change, %
Rate of change, %
ON ON
Drop-out voltage
20
Pick-up voltage
OFF condition
10
30
0
8.-(1) Influence of adjacent mounting
Pick-up voltage
40
10
30
10
50
40 Pick-up voltage
Quantity
Rate of change, %
Pick-up/drop-out voltage, V
12
ON
10
Drop-out voltage
0
ON
–10
ON condition
5
10
.197
.394
Inter-relay distance, (mm, inch)
NOTES
1. Soldering
Perform soldering under the conditions
below.
• Within 10 s at 260°C 500°F
• Within 3 s at 350°C 662°F
2. Latching relay
In order to assure proper operating regardless of changes in the ambient usage
temperature and usage conditions, nominal operating voltage should be applied to
the coil for more than 30 ms to set/reset
the latching type relay.
For Cautions for Use, see Relay Technical Information (Page 48 to 76).
104
9/1/2000
All Rights Reserved, © Copyright Matsushita Electric Works, Ltd.
Go To Online Catalog
Similar pages