RN1107~1109 TOSHIBA Transistor Silicon NPN Epitaxial Type (PCT Process) RN1107, RN1108, RN1109 Unit: mm Switching, Inverter Circuit, Interface Circuit and Driver Circuit Applications z With built-in bias resistors. z Simplified circuit design z Reduced number of parts and simplified manufacturing process z Complementary to RN2107~2109 Equivalent Circuit and Bias Resistor Values Type No. R1 (kΩ) R2 (kΩ) RN1107 10 47 RN1108 22 47 RN1109 47 22 JEDEC EIAJ TOSHIBA Weight: 2.4mg Absolute Maximum Ratings (Ta = 25°C) Characteristic Symbol Rating Unit Collector-base voltage RN1107~1109 VCBO 50 V Collector-emitter voltage RN1107~1109 VCEO 50 V RN1107 Emitter-base voltage RN1108 ― ― 2-2H1A 6 VEBO 7 V 15 RN1109 Collector current RN1107~1109 Ic 100 mA Collector power dissipation RN1107~1109 Pc 100 mW Junction temperature RN1107~1109 Tj 150 °C Storage temperature range RN1107~1109 Tstg −55~150 °C Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). 1 2007-11-01 RN1107~1109 Electrical Characteristics (Ta = 25°C) Characteristic Collector cut off current Symbol Test Circuit ICBO ― ICEO Min Typ. Max Unit VCB = 50 V, IE = 0 ― ― 100 nA ― VCE = 50 V, IB = 0 ― ― 500 nA ― VEB = 6 V, IC = 0 0.081 ― 0.15 ― VEB = 7 V, IC = 0 0.078 ― 0.145 RN1109 ― VEB = 15 V, IC = 0 0.167 ― 0.311 RN1107 ― 80 ― ― 80 ― ― 70 ― ― ― 0.1 0.3 0.7 ― 1.8 1.0 ― 2.6 2.2 ― 5.8 0.5 ― 1.0 0.6 ― 1.16 1.5 ― 2.6 RN1107~1109 RN1107 Emitter cut-off current DC current gain RN1108 RN1108 IEBO hFE RN1107~1109 VCE (sat) RN1108 VI (ON) ― VCE = 0.2 V, IC = 5 mA ― RN1107 RN1108 IC = 5 mA, IB = 0.25 mA ― RN1109 Input voltage (OFF) ― ― RN1107 Input voltage (ON) VCE = 5 V, IC = 10 mA ― RN1109 Collector-emitter saturation voltage ― Test Condition VI (OFF) ― VCE = 5 V, IC = 0.1 mA ― RN1109 mA ― V V V Translation frequency RN1107~1109 fT ― VCE =10 V, IC = 5 mA ― 250 ― MHz Collector output capacitance RN1107~1109 Cob ― VCB = 10 V, IE = 0, f = 1 MHz ― 3 6 pF 7 10 13 15.4 22 28.6 ― RN1107 Input Resistor Resistor Ratio RN1108 R1 ― ― RN1109 ― 32.9 47 61.1 RN1107 ― 0.191 0.213 0.232 0.421 0.468 0.515 1.92 2.14 2.35 RN1108 RN1109 R1/R2 ― ― 2 ― kΩ ― 2007-11-01 RN1107~1109 RN1107 RN1107 RN1108 RN1108 RN1109 RN1109 3 2007-11-01 RN1107~1109 RN1107 RN1107 RN1108 RN1108 RN1109 RN1109 4 2007-11-01 RN1107~1109 Type Name Marking RN1107 RN1108 RN1109 5 2007-11-01 RN1107~1109 RESTRICTIONS ON PRODUCT USE 20070701-EN GENERAL • The information contained herein is subject to change without notice. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 6 2007-11-01