RSP-100 ¡½ Features : series ry 100W Single Output with PFC Function na ¡EUniversal AC input / Full range ¡ Built-in active PFC function E ¡ Protections: Short circuit / Overload / Over voltage / Over temperature E ¡ Cooling by free air convection E ¡ Built-in constant current limiting circuit E ¡ 1U low profile 30mm E ¡ Remote ON-OFF control E ¡ LED indicator for power on E ¡ 100% full load burn-in test E ¡ 3 years warranty E SPECIFICATION MODEL RSP-100-3.3 RSP-100-5 RSP-100-7.5 RSP-100-12 RSP-100-13.5 RSP-100-15 RSP-100-24 RSP-100-27 RSP-100-48 DC VOLTAGE 3.3V 5V 7.5V 12V 13.5V 15V 24V 27V 48V RATED CURRENT 20A 20A 13.5A 8.5A 7.5A 6.7A 4.2A 3.8A 2.1A CURRENT RANGE 0 ~ 20A 0 ~ 20A 0 ~ 13.5A 0 ~ 8.5A 0 ~ 7.5A 0 ~ 6.7A 0 ~ 4.2A 0 ~ 3.8A 0 ~ 2.1A RATED POWER 66W 100W 101.25W 102W 101.25W 100.5W 100.8W 102.6W 100.8W 100mVp-p 100mVp-p 100mVp-p 100mVp-p 150mVp-p 150mVp-p 250mVp-p RIPPLE & NOISE (max.) Note.2 100mVp-p VOLTAGE ADJ. RANGE ¡Ó2.0% ¡Ó2.0% ¡Ó2.0% ¡Ó2.0% ¡Ó2.0% ¡Ó1.0% ¡Ó1.0% ¡Ó1.0% ¡Ó0.5% ¡Ó0.5% ¡Ó0.5% ¡Ó0.5% ¡Ó0.5% ¡Ó0.5% ¡Ó0.5% ¡Ó0.5% ¡Ó0.5% LOAD REGULATION ¡Ó1.0% ¡Ó1.0% ¡Ó1.0% ¡Ó0.5% ¡Ó0.5% ¡Ó0.5% ¡Ó0.5% ¡Ó0.5% ¡Ó0.5% SETUP, RISE TIME 600ms, 30ms at full load HOLD UP TIME (Typ.) 16ms at full load VOLTAGE RANGE 85 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.93/230VAC EFFICIENCY (Typ.) 76% 83% 85% 86% 86% 88% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 1.7A/115VAC 0.8A/230VAC COLD START 30A/230VAC LEAKAGE CURRENT <2mA / 240VAC PROTECTION OVER VOLTAGE 82% 83% 105 ~ 150% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed 3.63 ~ 4.46V 5.5 ~ 6.75V 8.25 ~ 10.13V 13.2 ~ 16.2V 14.85 ~ 18.23V 16.5 ~ 20.25V 26.4 ~ 32.4V 29.7 ~ 36.45V 52.8 ~ 64.8V Protection type : Shut down o/p voltage, re-power on to recover 95¢J ¡Ó5¢J (TSW1) detect on heatsink of power transistor Protection type : Shut down o/p voltage, recovers automatically after temperature goes down REMOTE CONTROL WORKING TEMP. CN1: < 0~0.8VDC POWER ON , 4~10VDC POWER OFF -30 ~ +70¢J (Refer to "Derating Curve") WORKING HUMIDITY 20 ~ 90% RH non-condensing -20 ~ +85¢J, 10 ~ 95% RH ¡Ó0.05%/¢J (0 ~ 50¢J) 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1, CCC GB4943 approved; Design refer to EN60335-1 I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25¢J/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3, GB9254 class B Pr VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note 4) EMC EMISSION EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A MTBF K hrs min. MIL-HDBK-217F (25¢J) 179*99*30mm (L*W*H) Kg DIMENSION PACKING NOTE PF>0.98/115VAC at full load 80% OVER TEMPERATURE ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT OTHERS 120 ~ 370VDC eli OVERLOAD FUNCTION 7.13 ~ 8.25V 11.4 ~ 13.2V 12.8 ~ 14.9V 14.3 ~ 16.5V 22.8 ~ 26.4V 25.7 ~ 29.7V 45.6 ~ 52.8V VOLTAGE TOLERANCE Note.3 ¡Ó2.0% LINE REGULATION INPUT 100mVp-p 3.14 ~ 3.63V 4.75 ~ 5.5V mi OUTPUT Bauar t gepruft Sicherheit egel ma ge od o s be wac g www.tuv.com ID 2000000000 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25¢J of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com) File Name:RSP-100-SPEC 2012-10-09 RSP-100 100W Single Output with PFC Function Mechanical Specification 179 60 65 25 CN1 R.C. +V ADJ. 117 1 2 LED 99 8 5 2-M4 L=5mm 49.5 9.5 3 119 6 na 7 4 2 16 1 117 Pin No. 1 2 12.5 30 6.9 7.25 7.25 EMI FILTER & RECTIFIERS Terminal JST XHP or equivalent JST SXH-001T-P0.6 or equivalent PFC fosc : 100KHz PWM fosc : 100KHz +V -V CONSTANT CURRENT & DETECTION CIRCUIT PWM & PFC CONTROL eli ACTIVE START CIRCUIT Derating Curve O.V.P. REMOTE CONTROL CN1 Output Derating VS Input Voltage 100 RSP-100-12~48 90 80 RSP-100-3.3~7.5 70 LOAD (%) Pr 60 LOAD (%) Mating Housing RECTIFIERS & FILTER POWER SWITCHING PFC CIRCUIT FG 40 20 -30 Assignment RC+ RC- 4-M4(Both Sides) L=6mm Block Diagram 80 Assignment DC OUTPUT -V DC OUTPUT +V Pin No. 4,5 6,7 Remote ON/OFF(CN1): JST S2B-XH or equivalent(optional) 2 100 Assignment AC/L AC/N FG mi 25 Terminal Pin No. Assignment Pin No. 1 2 3 15 I/P Unit:mm ry Case No. series 0 10 20 40 50 60 AMBIENT TEMPERATURE (¢J) 70 (HORIZONTAL) 60 50 40 85 100 115 135 155 230 264 INPUT VOLTAGE (VAC) 60Hz File Name:RSP-100-SPEC 2013-02-22