SF1601FCT thru SF1607FCT SUPERFAST RECOVERY RECTIFIER VOLTAGE - 50 TO 600 VOLTS CURRENT - 16 AMPERES ITO-220AB FEATURES MECHANICAL DATA Low forward voltage drop High Current Capability High reliability High surge Current Capability Good for switching mode application High temperature soldering 260oC/10seconds at terminals Pb free product are available 99% Sn above can meet RoHS environment substance directive request Case ITO220AB Molded plastic Epoxy UL 94V-0 rate flame retardant Lead Lead solderable per MIL-STD-202, Method 208 guranteed Polarity As Marked Mounting Position Any Weight 2.24gram MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load For capacitive load, derate current by 20% SF 1601FCT SF 1602FCT SF 1603FCT SF 1604FCT SF 1605FCT SF 1606FCT SF 1607FCT UNITS Maximum Repetitive Peak Reverse Voltage 50 100 150 200 300 400 600 Volts Maximum RMS Voltage 35 70 105 140 210 320 420 Volts Maximum DC Blocking Voltage 50 100 150 200 300 400 600 Volts PARAMETER Maximum Average Forward Rectified Current .375 (9.5mm) Lead Length at TC=1000C 16 Amps Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) 125 Amps Maximum Instandeous Forward Voltage at 8.0A 0.95 0 Maximum DC Reverse Current TA=25 C at Rated DC Blocking Voltage TA=1000C Volts A pF 62 Maximum Reverse Recovery Time (Note 2) 35 50 3.0 JC Operating and Storage Temperature Range TJ -55 to +150 NOTES 1. Measured at 1MHz and applied reverse Voltage of 4.0V D.C 2. Reverse Recovery Time test condition IF=0.5A , IR=1.0A , IRR=0.25A 3. Thermal Resistance Junction to CASE www.paceleader.com.tw 1.7 10 500 Typical Junction Capacitance (Note 1) Typical Thermal Resistance Note R 1.3 1 nS 0 C/W 0 C SF1601FCT thru SF1607FCT SUPERFAST RECOVERY RECTIFIER RATINGS AND CHARACTERISTIC CURVES SF1601FCT THRU SF1607FCT www.paceleader.com.tw 2