Preliminary SF2076B ® • • • • • Designed for 802.16 and WIMAX Receiver IF Application Low Insertion Loss 5.0 X 7.0 mm or Single Ended Surface-Mount Case Differential Input and Output Complies with Directive 2002/95/EC (RoHS) Pb 464.00 MHz SAW Filter Absolute Maximum Ratings Rating Value Units Maximum Incident Power in Passband +13 dBm Max. DC voltage between any 2 terminals 30 VDC Storage Temperature Range -40 to +85 Suitable for lead-free soldering - Max Soldering Temperature °C 260°C for 30 s SMP-03 Electrical Characteristics Characteristic Nominal Center Frequency Insertion Loss Passband Variation; CF ±1.70 MHz CF ±1.85 MHz Group Delay Variation; CF ±1.7 MHz Sym fC Return Loss Triple Transit (reference to time domain main lobe peak) after 1-2us after 2-3us after >3us Rejection DC to 264 MHz 264 to 368 MHz 368 to 424 MHz 424 to 460.65 MHz 467.35 to 664 MHz 664 to 954 MHz Maximum Peak RF Input Power Maximum RF Input Power Over Life Life of Part Temperature Operating Storage Case Style Lid Symbolization (YY=year, WW=week, S=shift) Notes 1 Min Typ 464.000 9.5 0.7 200 10 33 10 33 40 30 40 50 40 40 30 Max 10.5 1.5 3 300 35.6 11.8 35.7 43.2 Units MHz dB dB p-p nsec dB dB 13 10 25 -40 85 -40 85 SMP-03 7 x 5 mm Nominal Footprint RFM SF2076B YYWWS dBm dBm years °C I. 200 ohm Matching .............................page 2 II. 200 ohm Matching Toko Inductor .....page 5 III. SMI 7035 Matching ........................page 8 Notes: 1. 2. 3. 4. 5. 6. 7. 8. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 Ω and measured with 50 Ω network analyzer. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. The design, manufacturing process, and specifications of this filter are subject to change. Tape and Reel Standard ANSI / EIA 481. US and international patents may apply. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc. ©Copyright 1999, RF Monolithics Inc. Electrostatic Sensitive Device. Observe precautions for handling. RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 ©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: [email protected] http://www.rfm.com SF2076B-062106 Page 1 of 11 464.00 MHz SAW Filter I. Impedance Matching for 200 Ohm Differential Impedance: Coilcraft Inductors (SAW Matched to 200 Ohms Balanced, 4:1 Transformers Account for 2dB of Loss) SF2070B Demo Schematic P9 L1 P8 0 P7 L3 TX1 TX2 P10 P6 27nH 33nH C1 C2 6.8pF SF2070B 0 6.8pF L2 L4 P1 P5 24nH P2 P3 30nH P4 0 0 Part Value Manufactureer Part # RFM Part # Qty. PCB NA CUSTOM BUILT FOR RFM 400-1608-001 1 L1 27 nH Coilcraft 0603CS-27NXJB, 0603 size NA 1 L2 24 nH Coilcraft 0603CS-24NXJB, 0603 size NA 1 L3 33 nH Coilcraft 0603CS-33NXJB, 0603 size NA 1 L4 30 nH Coilcraft 0603CS-30NXJB, 0603 size NA 1 C1, C3 6.8 pF Murata GRM1885C1H6R8CZ01D 500-0621-068 2 C2 .5 pF Murata GRM1885C1HR50CZ01D NA 1 4:1 Ratio Mini Circuits ADT4-1WT 500-0912-001 2 Female SMA M/A Com 2052-0000-00 500-2048-001 2 XFMR1, XFMR2 J1, J2 22 Apr 2005 12:15:05 CH1 S21 LOG 10 dB/ 1 : 0 . 0000 REF -11 dB dB 0 . 000 000 MHz SF2070B DEMO2 PRm CH1 Markers Max REF=1 4 . 263507 MHz BW : Cor cent : 464 . 026183 MHz Q: 108 . 84 1 1_ loss : -10 . 788 dB 2 3 CENTER 464 . 000 000 4 MHz RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 ©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. SPAN 20 . 000 000 MHz E-mail: [email protected] http://www.rfm.com SF2076B-062106 Page 2 of 11 464.00 MHz SAW Filter I. Impedance Matching for 200 Ohm Differential Impedance: Coilcraft Inductors (SAW Matched to 200 Ohms Balanced, 4:1 Transformers Account for 2dB of Loss) 22 Apr 2005 12:11:42 CH1 S21 LOG 2 dB/ REF -13 dB 2 : - . 34620 dB 3 . 769 774 MHz SF2070B DEMO2 CH1 mean 2 Cor : -11 s . dev Markers REF=1 . 857 dB : . 61390 dB : 1 . 8839 dB 1 p-p PRm CH2 S21 DEL 100 ns/ REF 500 ns 2 : -116 . 21 ns 3 . 769 774 MHz 2 1 CH2 Smo Cor Markers REF=1 mean : 579 . 44 ns s . dev : 70 . 857 ns : 365 . 58 ns p-p PRm CENTER 464 . 000 000 MHz RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 ©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. SPAN 20 . 000 000 MHz E-mail: [email protected] http://www.rfm.com SF2076B-062106 Page 3 of 11 464.00 MHz SAW Filter I. Impedance Matching for 200 Ohm Differential Impedance: Coilcraft Inductors (SAW Matched to 200 Ohms Balanced, 4:1 Transformers Account for 2dB of Loss) 22 Apr 2005 12:09:59 CH1 S11 1 : 51 . 678 1 U FS 18 . 072 6 . 1989 nH 464 . 000 000 MHz 7 . 8945 nH 464 . 000 000 MHz SF2070B DEMO2 1 Cor PRm CH2 S22 1 U FS 1 : 50 . 158 23 . 016 Smo 1 Cor PRm CENTER 464 . 000 000 MHz RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 ©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. SPAN 20 . 000 000 MHz E-mail: [email protected] http://www.rfm.com SF2076B-062106 Page 4 of 11 464.00 MHz SAW Filter II. Impedance Matching: Toko Inductor 200 Ohm Differential Impedance (4:1 Transformers Account for 2dB of Loss) L1 L3 J1 6 10 C1 C2 C3 SF2076B 5 1 J2 4:1 1:4 L4 L2 XFMR1 XFMR2 All Other Pins Ground Part Value Manufactureer Part # RFM Part # PCB NA CUSTOM BUILT FOR RFM 400-1608-001 1 L2-L4 27 nH TOKO LL 1608-FSL27NJ NA 4 C1, C3 6.8 pF Murata GRM1885C1H6R8CZ01D 500-0621-068 2 C2 .5 pF Murata GRM1885C1HR50CZ01D NA 1 4:1 Ratio Mini Circuits ADT4-1WT 500-0912-001 2 Female SMA M/A Com 2052-0000-00 500-2048-001 2 XFMR1, XFMR2 J1, J2 Qty. 23 Mar 2006 09:49:17 CH1 S21 LOG 10 dB/ REF -20 dB 1 : 0 . 0000 dB 0 . 000 000 MHz CH1 PASS SF2076B Demo Using TOKO Inductors Full 2-port cal, -1.5 dB BW PRm ACTUAL LOSS ABOUT -10.581 dB DUE TO TRANSFORMER LOSS CH1 Markers REF=1 3 . 991976 MHz BW : Cor cent : 463 . 966912 MHz Q: 116 . 22 1_ loss : -12 . 581 dB 1 Hld 2 3 4 Full START 459 . 000 000 MHz RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 ©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. STOP 469 . 000 000 MHz E-mail: [email protected] http://www.rfm.com SF2076B-062106 Page 5 of 11 464.00 MHz SAW Filter II. Impedance Matching: Toko Inductor 200 Ohm Differential Impedance (4:1 Transformers Account for 2dB of Loss) 23 Mar 2006 09:14:31 CH1 S21 DEL 50 ns/ REF 548.7 ns 2 : 21 . 057 ns 3 . 400 000 MHz SF2076B Demo Using TOKO Inductors 2 CH1 Full 2-port cal, CH2 Thru cal CH1 Smo Markers REF=1 mean : 572 . 82 s . dev : 38 . 085 ns ns : 151 . 48 ns 1 Cor p-p PRm Full CH1 CH2 CENTER S21 464 . 000 LOG 000 1 dB/ MHz SPAN REF -14.5 dB 2 : - . 01250 dB 10 . 000 3 . 400 000 000 MHz MHz CH2 2 mean Cor Resp 1 : -12 Markers REF=1 . 530 dB s . dev : . 10840 dB p-p : . 62010 dB PRm CH2 CENTER CH1 464 . 000 S21 LOG 000 MHz SPAN 10 dB/ REF -14.5 dB 20 . 000 000 MHz 23 Mar 2006 09:01:41 SF2076B Demo Using TOKO Inductors Thru cal PRm Cor Resp CENTER 604 . 000 000 MHz RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 ©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. SPAN 700 . 000 000 MHz E-mail: [email protected] http://www.rfm.com SF2076B-062106 Page 6 of 11 464.00 MHz SAW Filter II. Impedance Matching: Toko Inductor 200 Ohm Differential Impedance (4:1 Transformers Account for 2dB of Loss) 23 Mar 2006 09:21:14 CH2 S21 LOG 10 dB/ 1 : 0 . 0000 REF -14.5 dB dB 0s SF2076B Demo using TOKO Inductors Thru cal CH2 Markers REF=1 . 707 1 . 06 dB us 3 : -32 . 849 2 . 346 dB us 4 : -40 . 680 3 . 089 dB us 5 : -39 . 094 dB 1 . 17 us 2 : -23 1 PRm 2 Cor Resp 3 5 4 START 0 s STOP 4 us 23 Mar 2006 08:50:28 CH1 S11 1 : 43 . 766 1 U FS 27 . 084 9 . 2900 nH 464 . 000 000 MHz 4 . 9635 nH 464 . 000 000 MHz SF2076B Demo Using TOKO Inductors Full 2-port cal 1 Cor PRm Full CH2 S22 1 U FS 1 : 43 . 896 14 . 471 1 Cor Full PRm CENTER 464 . 000 000 MHz RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 ©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. SPAN 10 . 000 000 MHz E-mail: [email protected] http://www.rfm.com SF2076B-062106 Page 7 of 11 464.00 MHz SAW Filter III. Impedance Matching on SMI Radio Board: SMI7035 (200 Ohms Differential) RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 ©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: [email protected] http://www.rfm.com SF2076B-062106 Page 8 of 11 464.00 MHz SAW Filter III. Impedance Matching on SMI Radio Board: SMI7035 (SAW Matched to 200 Ohms Balanced) RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 ©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: [email protected] http://www.rfm.com SF2076B-062106 Page 9 of 11 464.00 MHz SAW Filter SMP-03 Case 10-Terminal Ceramic Surface-Mount Case 7 x 5 mm Nominal Footprint Case Dimensions Dimension A B C D E H J K P Recommended PCB Footprint Min 6.80 4.80 1.50 .47 2.41 0.87 4.87 2.87 1.14 mm Nom 7.00 5.00 1.65 0.60 2.54 1.0 5.00 3.00 1.27 Max 7.20 5.20 2.00 .73 2.67 1.13 5.13 3.13 1.40 Min 0.268 0.189 0.059 0.019 0.095 0.034 0.192 0.113 0.045 Inches Nom 0.276 0.197 0.065 0.024 0.100 0.039 0.197 0.118 0.050 Max 0.283 0.205 0.079 0.029 0.105 0.044 0.202 0.123 0.055 Materials Solder Pad Termination Au plating 30 - 60 µinches (76.2-152 µm) over 80200 µinches (203-508 µm) Ni. Lid Fe-Ni-Co Alloy Electroless Nickel Plate (8-11% Phosphorus) 100-200 µinches Thick Body Al2O3 Ceramic Pb Free Electrical Connections Connection Port 1 Port 2 Terminals Input or Return 10 Return or Input 1 Output or Return 5 Return or Output 6 Ground All others Single Ended Operation Return is ground Differential Operation Return is hot C B E H H A J D P K RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 ©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: [email protected] http://www.rfm.com SF2076B-062106 Page 10 of 11 464.00 MHz SAW Filter Tape and Reel Specifications Quantity Per Reel Inches millimeters 7 178 500 13 330 2000 "B" REF. 100 REF. “B “ Nominal Size See Detail "A" 13. 0 12.0 20 .2 2.0 COMPONENT ORIENTATION and DIMENSIONS Carrier Tape Dimensions Tolerance Ao 5.5 mm ± 0.1mm Bo 7.5 mm ± 0.1mm Ko 2.0 mm ± 0.1mm Pitch 8.0 mm ± 0.1mm W 16.0 mm ± 0.2mm PIN #1 USER DIRECTION OF FEED RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 ©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: [email protected] http://www.rfm.com SF2076B-062106 Page 11 of 11