SOURCE SFA-34-24T-HP-TDFI

SFA-34-24T-HP-TDFI
Features
z
Single Fiber, Integrated Diplexer Transceiver
z
2x10 SFF pinout supports I2C digital diagnostics
z
Voice/Data FTTx ONT/ONU Applications
z
Compliant to FSAN G.984.5 Specifications
z
1244 Mbps Tx, 2488 Mbps Rx Asymmetric Data Rate
z
1310 nm Tx, 1490 nm Rx
z
Burst Mode Transmission
z
DDM TX Power
z
TX Burst Mode Detection, TX_SD
z
28 dB link budget; 20 km reach
z
Compliant to IEC-60825 Class 1 laser diode
z
SC/APC fiber connector
z
RoHS compliant
z
Internal Calibration
Regulatory Compliance
Table 1 – Regulatory Compliance
Feature
Standard
Performance
Electrostatic Discharge
MIL-STD-883E
Class
(ESD) to the Electrical Pins
Method 3015.7
pins, >2000V for other pins.)
Electrostatic Discharge (ESD) to the
IEC 61000-4-2
Duplex LC Receptacle
GR-1089-CORE
Electromagnetic
Interference (EMI)
Immunity
Laser Eye Safety
RoHS
1(>500V
for
XFI
Compatible with standards
FCC Part 15 Class B
EN55022 Class B (CISPR 22B)
Compatible with standards
VCCI Class B
IEC 61000-4-3
Compatible with standards
FDA 21CFR 1040.10 and 1040.11
Compatible with Class I laser
EN60950, EN (IEC) 60825-1,2
product.
2002/95/EC 4.1&4.2
2005/747/EC
Compliant with standards note
Note:
In light of item 5 in Annex of 2002/95/EC, “Pb in the glass of cathode ray tubes, electronic components and
fluorescent tubes.” and item 13 in Annex of 2005/747/EC, “Lead and cadmium in optical and filter glass.”,
the two exemptions are being concerned for Source Photonics transceivers, because Source Photonics
transceivers use glass, which may contain Pb, for components such as lenses, windows, isolators, and
other electronic components.
DS-6470 Rev 01 2011-03-28
SFA-34-24T-HP-TDFI
Absolute Maximum Ratings
Table 2 – Absolute Maximum Ratings
Parameter
Symbol
Min.
Typical
Max.
Unit
TS
-40
-
+85
°C
VCC_Rx
-0.4
-
+4.2
V
VCC_Tx
-0.4
-
VCC_Rx+1
V
RH
5
-
95
%
Storage Temperature
Supply Voltage
Operating Relative Humidity
Notes
Recommended Operating Conditions
Table 3 – Recommended Operating Conditions
Parameter
Symb
Min.
Typical
Max.
Unit
Notes
ol
Operating Case Temperature
TC
-40
-
85
°C
Operating Voltage
VCC
3.14
3.30
3.46
V
Total TX and RX Supply Current
ICC
-
-
400
mA
Power Dissipation
PD
-
-
1.5
W
Bit Rate(Tx)
BR
-
1244.16
-
Mbps
Bit Rate(Rx)
BR
-
2488.32
-
Mbps
Transmission Distance
TD
-
-
20,000
m
Optical Characteristics
Table 4 – Optical Characteristics
Transmitter
Parameter
Symbol
Min.
Typical
Max.
Unit
λC
1290
-
1330
nm
P0UT
0.5
-
5
dBm
Average Output Power (Laser Off)
P0UT-OFF
-
-
-45
dBm
Side Mode Suppression Ratio
SMSR
30
-
-
dB
-
-
1
nm
ER
10
-
-
dB
TR/TF
-
250
-
ps
JG
-
-
0.2
UI
Center Wavelength Range
Average Output Power
Spectral Width (-20dB)
Extinction Ratio
Optical Rise and Fall Time(20%-80%)
Jitter Generation
λ20
Transmitter Output Eye
Notes
1
2
Compliant with G.984.2 Figure 3
Receiver
Center Wavelength Range
λC
1480
-
1500
nm
DS-6470 Rev 01 2011-03-28
SFA-34-24T-HP-TDFI
Received Optical Power
Pin
-28
-
-8
dBm
TR/TF
-
160
-
ps
Signal Detect Assertion Level
SDA
-
-
-31
dBm
Signal Detect De-Assertion Level
SDD
-45
-
-
dBm
PSDA-SDD
0.5
-
6
dB
RSSI
-3
-
+3
dB
-
-
-47
dB
30
-
-
dB
30
-
-
dB
Data Output Rise and Fall Time
(20% to 80%)
Hysteresis
RSSI Accuracy
1310nm Tx to 1490nm Rx Crosstalk
1555nm Rx to 1490nm Isolation
G.984.5 Wavelength Blocking Filter
Isolation
3
Notes:
1.
Measured with a PRBS 223-1, NRZ, 50% duty cycle.
2.
4kHz to 10MHz
3.
Measured with a PRBS 231-1, 50% duty cycle.
Electrical Characteristics
Table 5 – Electrical Characteristics
Transmitter
Parameter
Symbol
Min.
Typical
Max.
Unit
Notes
VIN,P-P
200
-
2400
mVpp
4
ZIN
-
100
-
Ω
5
Tx Burst Enable Time
TBURST_EN
-
-
12.86
ns
6
Tx Burst Disable Time
TBURST_DIS
-
-
12.86
ns
6
Tx_BRST Voltage - Low
VTX_ENB_Low
0
-
0.8
V
Tx_BRST Voltage – High
VTX_ENB_Hith
2.0
-
Vcc
V
Tx_SD timing “D”
TTX_SD-D
-
-
1000
nS
7
Tx_SD timing “X”
TTX_SD-X
-
-
350
nS
7
TTX_SD_Startup
-
-
3
S
7
300
-
1200
mV
8
Differential Data Input Amplitude
Input Differential Impedance
Tx_SD Startup Time
Receiver
Differential Output Voltage
Signal Detect Output HIGH Voltage
VSD_High
2.4
-
-
V
9
Signal Detect Output LOW Voltage
VSD_Low
-
-
0.6
V
10
TR/TF
-
160
-
ps
Data Output Rise and Fall Time
Notes:
4.
TxD+/-. DC-coupled.
5.
TxD+/-.
6.
16 bits data @1244Mbps
7.
Tx_SD:
DS-6470 Rev 01 2011-03-28
SFA-34-24T-HP-TDFI
Figure 1, Tx_SD Timing diagram
Figure 2, Tx_SD Startup Timing diagram
8.
CML output, AC coupled(0.1µF)
9.
LVTTL with internal 10kΩ pull up resistor. Asserts HIGH when input data amplitude is above threshold.
10. LVTTL. De-asserts LOW when input data amplitude is below threshold.
DS-6470 Rev 01 2011-03-28
SFA-34-24T-HP-TDFI
Recommended Interface Circuit
+3.3V
VEET(12,16)
0.1μF
2X1μH
10μF
0.1μF
VCCT(11)
VCCR(7)
10μF
0.1μF
VEER(2,3,6)
TX_BRST(13)
PON_TX_DISABLE
+3.3V
R1=NC
Z=50
TXP
Z=50
TD-(15)
TXN
R2=NC
+3.3V
GPON MAC
4.7-10K
SerDes
+3.3V
NC
NC
NC
Laser Driver
(BM)
100
R2=NC
Tx_Fault(19)
Tx_SD(20)
Z=50
RD-(9)
Z=50
RD+(10)
RXN
RXP
R1=NC
TD+(14)
LIA
(CM)
NC
+3.3V
SD(8)
10K
+3.3V
2X4.7-10K
PON_SDA
PON_SCL
SDA(18)
SCL(17)
Microprocessor
Temperature
Supply Voltage
Bias Current
Tx Power
Rx Power
Figure 3, Recommended Interface Circuit
DS-6470 Rev 01 2011-03-28
SFA-34-24T-HP-TDFI
Pin Definitions
Figure 4, Pin View
Table 6 – Pin definitions
Pin
Logic
Symbol
Name/Description
Note
1
NA
NC
No User Connection
2
NA
GND_Rx
Digital Rx ground
3
NA
GND_Rx
Digital Rx ground
4
NA
NC
Reserved, No User Connection
5
NA
NC
Reserved, No User Connection
6
NA
GND_Rx
Digital Rx Ground
7
NA
Vcc_Rx
Digital Rx Vcc
8
LVTTL-O
SD
9
CML-O
RxD-
10
CML-O
RxD+
11
NA
Vcc_Tx
Digital Tx Vcc
12
NA
GND_Tx
Digital Tx Ground
13
LVTTL-I
Tx_BRST
Tx Burst Enable. LVTTL Input (1=TX on, 0=TX off)
14
CML-I
TxD+
15
CML-I
TxD-
16
NA
GND_Tx
Digital Tx Ground
17
LVTTL-I
SCL
I2C Clock input
Signal Detect output, pull up internally (4.7kΩ).
Asserts
high when input optical power level is above threshold
RX data bar output, CML. 50Ω terminated to Vcc and AC
coupled to module output (0.1µF)
RX data output, CML. 50Ω terminated to Vcc and AC coupled
to module output (0.1µF)
Tx data input, CML. Internally DC coupled. 100Ω differential
termination.
Tx data bar input, CML. Internally DC coupled. 100Ω
differential termination.
2
18
LVTTL-I/O
SDA
I C Data input/output
19
LVTTL-O
Tx_Fault
Module Transmitter Fault
20
LVTTL-O
Tx_SD
Tx signal detect
1
1
Note
1. This pin is an open collector/drain output pin and shall be pulled up with 4.7K-10K ohms to a Host_Vcc on
the host board.
DS-6470 Rev 01 2011-03-28
SFA-34-24T-HP-TDFI
Mechanical Diagram
Figure 5, Mechanical Diagram
EEPROM Information
Figure 6, EEPROM Diagram
DS-6470 Rev 01 2011-03-28
SFA-34-24T-HP-TDFI
Table 7 –EEPROM Memory Content (A0h)
Addr.
Field Size (Bytes)
Name of Field
Hex
Description
Module/connector soldered to
0
1
Identifier
02
1
1
Ext. Identifier
04
MOD4
2
1
Connector
0B
Optical Pigtail
3-10
8
Transceiver
00 00 00 00 00 00 00 00
11
1
Encoding
03
NRZ
12
1
BR, Nominal
0C
1.244Gbps
13
1
Reserved
00
14
1
Length (9um)-km
14
20(km)
15
1
Length (9um)
C8
200(100m)
16
1
Length (50um)
00
Not Support MMF
17
1
Length (62.5um)
00
Not Support MMF
18
1
Length (Copper)
00
Not Support Copper
19
1
Reserved
00
20-35
16
Vendor name
36
1
Reserved
37-39
3
Vendor OUI
40-55
16
Vendor PN
56-59
4
Vendor Rev
xx xx 20 20
60-61
2
Wavelength
05 1E
62
1
Reserved
00
63
1
CC_BASE
xx
Check sum of byte 0-62
64-65
2
Options
00 0C
Rx_SD, Tx_Fault
66
1
BR, max
00
67
1
BR, min
00
68-83
16
Vendor SN
84-91
8
Date code
53 4F 55 52 43 45 50 48
4F 54 4F 4E 49 43 53 20
motherboard
“SOURCEPHOTONICS ”(ASCⅡ)
00
00 00 00
53 46 41 33 34 32 34 54
“SFA3424THPTDFI” (ASCII)
48 50 54 44 46 49 20 20
ASCII(“31
30
20”
means
1.0
1310nm Laser Wavelength
xx xx xx xx xx xx xx xx
ASCII
xx xx xx xx xx xx xx xx
xx xx xx xx xx xx 20 20
20
Revision)
Year(2 bytes),Month(2 bytes), Day(2
bytes)
Compliant with SFF-8472 V9.5
92
1
Diagnostic Monitoring
Type
68
Internally Calibrated
Received power measurement type
-Average Power
93
1
94
1
Enhanced Options
B0
SFF-8472 Compliance 02
Optional
Alarm/warning
Flags
Implemented; Tx_Fault; Rx_Los
Diagnostics
Compliance(SFF-8472
V9.5)
DS-6470 Rev 01 2011-03-28
SFA-34-24T-HP-TDFI
95
1
CC_EXT
96-255
64
Vendor Specific
xx
Check sum of byte 64-94
Table 8 –EEPROM Memory Content (A2h)
Addr.
Field Size
(Bytes)
Name of Field
Hex
Description
0
00
2
Temp High Alarm
64 00(I temp)
100℃(I temp)
2
02
2
Temp Low Alarm
CE 00(I temp)
-50℃(I temp)
4
04
2
Temp High Warning
5A 00 (I temp)
90℃(I temp)
6
06
2
Temp Low Warning
D8 00(I temp)
-40℃(I temp)
8
08
2
Voltage High Alarm
8C A0
3.6V
10
0A
2
Voltage Low Alarm
75 30
3.0V
12
0C
2
Voltage High Warning
88 B8
3.5V
14
0E
2
Voltage Low Warning
79 18
3.1V
16
10
2
Bias High Alarm
AF C8
90mA
18
12
2
Bias Low Alarm
00 00
0mA
20
14
2
Bias High Warning
88 B8
70mA
22
16
2
Bias Low Warning
00 00
0mA
24
18
2
TX Power High Alarm
9B 82
6dBm
26
1A
2
TX Power Low Alarm
22 D0
-0.5dBm
28
1C
2
TX Power High Warning
7B 86
5dBm
30
1E
2
TX Power Low Warning
2B D4
0.5dBm
32
20
2
RX Power High Alarm
07 CB
-7dBm
34
22
2
RX Power Low Alarm
00 0F
-28dBm
36
24
2
RX Power High Warning
06 30
-8dBm
38
26
2
RX Power Low Warning
00 14
-27dBm
40
28
16
Reserved
00….000
Reserved
56
38
4
RX_PWR(4) Calibration
00 00 00 00
4th order RSSI calibration coefficient
60
3C
4
RX_PWR(3) Calibration
00 00 00 00
3rd order RSSI calibration coefficient
64
40
4
RX_PWR(2) Calibration
00 00 00 00
2nd order RSSI calibration coefficient
68
44
4
RX_PWR(1) Calibration
3F 80 00 00
1st order RSSI calibration coefficient
72
48
4
RX_PWR(0) Calibration
00 00 00 00
0th order RSSI calibration coefficient
76
4C
2
TX_I(Slope) Calibration
01 00
Slope for Bias calibration
78
4E
2
TX_I(Offset) Calibration
00 00
Offset for Bias calibration
80
50
2
TX_PWR(Slope) Calibration
01 00
Slope for TX Power calibration
82
52
2
TX_PWR(Offset) Calibration
00 00
Offset for TX Power calibration
84
54
2
T(Slope) Calibration
01 00
Slope for Temperature calibration
86
56
2
T(Offset) Calibration
00 00
88
58
2
V(Slope) Calibration
01 00
Offset for Temperature calibration, in
units of 256ths C
Slope for VCC calibration
DS-6470 Rev 01 2011-03-28
SFA-34-24T-HP-TDFI
90
5A
2
V(Offset) Calibration
00 00
Offset for VCC calibration
92
5C
3
Reserved
00 00 00
Reserved
95
5F
1
Checksum
xx
Checksum
96
60
2
Transceiver Temperature
xx xx
Temperature in C/256
98
62
2
Supply Voltage
xx xx
Vcc
100
64
2
TX Bias Current
xx xx
BIASMON
102
66
2
TX Optical Output Power
xx xx
Back facet monitor
104
68
2
RX Optical Input Power
xx xx
RSSI
106
6A
2
Reserved
00 00
Reserved
108
6C
2
Reserved
00 00
Reserved
6E.7
1bit
TX_DIS State
x
Soft TX disable state
6E.6
1bit
Soft TX Disable
x
6E.5
1bit
Reserved.
0
Reserved
6E.4
1bit
Rate Select State
0
NOT SUPPORTED.
6E.3
1bit
Rate Select
0
NOT SUPPORTED.
6E.2
1bit
TX_FAULT
x
Digital state of the TX Fault Output
6E.1
1bit
Rx LOS
x
Digital state of the Rx LOS Output
6E.0
1bit
Data Ready Bar
x
6F.7
1bit
Reserved
0
Reserved
6F.6
1bit
Reserved
0
Reserved
6F.5
1bit
Reserved
0
Reserved
6F.4
1bit
Reserved
0
Reserved
6F.3
1bit
Reserved
0
Reserved
6F.2
1bit
Reserved
x
Reserved
6F.1
1bit
Reserved
0
Reserved
6F.0
1bit
Reserved
x
Reserved
70.7
1bit
Temperature too high alarm
x
Temperature too high alarm
70.6
1bit
Temperature too low alarm
x
Temperature too low alarm
70.5
1bit
VCC too high alarm
x
VCC too high alarm
70.4
1bit
VCC too low alarm
x
VCC too low alarm
70.3
1bit
BIASMON too high alarm
x
BIASMON too high alarm
70.2
1bit
BIASMON too low alarm
x
BIASMON too low alarm
70.1
1bit
TX Power too high alarm
x
TX Power too high alarm
70.0
1bit
TX Power too low alarm
x
TX Power too low alarm
71.7
1bit
RX Power too high alarm
x
RX Power too high alarm
71.6
1bit
RX Power too low alarm
x
RX Power too low alarm
71.5
1bit
Reserved interrupt status bit
x
Reserved interrupt status bit
71.4
1bit
Reserved interrupt status bit
x
Reserved interrupt status bit
71.3
1bit
Reserved interrupt status bit
x
Reserved interrupt status bit
71.2
1bit
Reserved interrupt status bit
x
Reserved interrupt status bit
110
111
112
113
Write bit that allows software disable
laser output.
Indicates transceiver has achieved
power up and data is ready.
DS-6470 Rev 01 2011-03-28
SFA-34-24T-HP-TDFI
71.1
1bit
Reserved interrupt status bit
x
Reserved interrupt status bit
71.0
1bit
Reserved interrupt status bit
x
Reserved interrupt status bit
114
72
1
Reserved
00
Reserved
115
73
1
Reserved
00
Reserved
74.7
1bit
Temperature too high warning
x
Temperature too high warning
74.6
1bit
Temperature too low warning
x
Temperature too low warning
74.5
1bit
VCC too high warning
x
VCC too high warning
74.4
1bit
VCC too low warning
x
VCC too low warning
74.3
1bit
BIASMON too high warning
x
BIASMON too high warning
74.2
1bit
BIASMON too low warning
x
BIASMON too low warning
74.1
1bit
TX Power too high warning
x
TX Power too high warning
74.0
1bit
TX Power too low warning
x
TX Power too low warning
75.7
1bit
RX Power too high warning
x
RX Power too high warning
75.6
1bit
RX Power too low warning
x
RX Power too low warning
75.5
1bit
Reserved interrupt status bit
0
Reserved interrupt status bit
75.4
1bit
Reserved interrupt status bit
0
Reserved interrupt status bit
75.3
1bit
Reserved interrupt status bit
0
Reserved interrupt status bit
75.2
1bit
Reserved interrupt status bit
0
Reserved interrupt status bit
75.1
1bit
Reserved interrupt status bit
0
Reserved interrupt status bit
75.0
1bit
Reserved interrupt status bit
0
Reserved interrupt status bit
116
117
118
76
1
Reserved
00
Reserved
119
77
1
Reserved
00
Reserved
120
78
8
Vendor Specific
00 00 00 00 00 00 00 00
Vendor Specific
Table 9 – Digital Diagnostic Specification (A2h)
Data Address
Parameter
Range
Accuracy
96-97
Temperature
-40 to 85°C
±3°C
98-99
Vcc Voltage
0 to Vcc
±3%
100-101
Bias Current
0 to 100mA
±10%
102-103
TX Power
-1 to 5dBm
±2dB
104-105
RX Power
-28 to -8dBm
±3dB
Order Information
Table 10 – Order Information
Part No.
SFA-34-24T-HP-TDFI
Application
GPON ONT
Data Rate
Laser
Source
TX:1244.16Mb/s
1310nm
RX:2488.32Mb/s
DFB
Fiber Type
SMF
Temp
Range
-40 to 85°C
DS-6470 Rev 01 2011-03-28
SFA-34-24T-HP-TDFI
Warnings
Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD).
A static free environment is highly recommended. Follow guidelines according to proper ESD procedures.
Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to
direct or indirect radiation.
Legal Notice
IMPORTANT NOTICE!
All information contained in this document is subject to change without notice, at Source Photonics’s sole
and absolute discretion. Source Photonics warrants performance of its products to current specifications
only in accordance with the company’s standard one-year warranty; however, specifications designated as
“preliminary” are given to describe components only, and Source Photonics expressly disclaims any and all
warranties for said products, including express, implied, and statutory warranties, warranties of
merchantability, fitness for a particular purpose, and non-infringement of proprietary rights. Please refer to
the company’s Terms and Conditions of Sale for further warranty information.
Source Photonics assumes no liability for applications assistance, customer product design, software
performance, or infringement of patents, services, or intellectual property described herein. No license,
either express or implied, is granted under any patent right, copyright, or intellectual property right, and
Source Photonics makes no representations or warranties that the product(s) described herein are free
from patent, copyright, or intellectual property rights. Products described in this document are NOT
intended for use in implantation or other life support applications where malfunction may result in injury or
death to persons. Source Photonics customers using or selling products for use in such applications do so
at their own risk and agree to fully defend and indemnify Source Photonics for any damages resulting from
such use or sale.
THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN “AS IS” BASIS. Customer
agrees that Source Photonics is not liable for any actual, consequential, exemplary, or other damages
arising directly or indirectly from any use of the information contained in this document. Customer must
contact Source Photonics to obtain the latest version of this publication to verify, before placing any order,
that the information contained herein is current.
Contact
U.S.A. Headquarters
China
20550 Nordhoff Street
Building #2&5, West Export Processing Zone
Taiwan
Chatsworth, CA 91311
No. 8 Kexin Road, Hi-Tech Zone
9F, No 81, Shui Lee Rd.
USA
Chengdu, 611731, China
Hsinchu, Taiwan, R.O.C.
Tel: +1-818-773-9044
Tel: +86-28-8795-8788
Tel: +886-3-5169222
Fax: +1-818-773-0261
Fax: +86-28-8795-8789
Fax: +886-3-5169213
© Copyright Source Photonics, Inc. 2009~2011
All rights reserved
DS-6470 Rev 01 2011-03-28