S P V- 3 0 0 300W Single Output with PFC Function series Features : Universal AC input / Full range Built-in active PFC function, PF>0.95 Protections: Short circuit / Overload / Over voltage / Over temperature Forced air cooling by built-in DC Fan Output voltage programmable from 20~110% by 1~5.5VDC external control signal Built-in remote ON-OFF control Built-in fan speed control Fixed switching frequency at 100KHz 3 years warranty SPECIFICATION MODEL OUTPUT SPV-300-12 SPV-300-24 SPV-300-48 DC VOLTAGE 12V 24V 48V RATED CURRENT 25A 12.5A 6.25A CURRENT RANGE 0 ~ 25A 0 ~ 12.5A 0 ~ 6.25A RATED POWER 300W 300W 300W RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 240mVp-p VOLTAGE ADJ. RANGE 20 ~ 26.4V 1.0% 41 ~ 52.8V 1.0% 10.8 ~ 13.2V VOLTAGE TOLERANCE Note.3 1.0% LINE REGULATION 0.3% 0.2% 0.2% LOAD REGULATION 0.5% 0.5% 0.5% SETUP, RISE TIME 800ms, 50ms/230VAC HOLD UP TIME (Typ.) 16ms/230VAC 16ms/115VAC at full load VOLTAGE RANGE Note.5 88 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz INPUT PF>0.95/230VAC EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 83.5% 5A/115VAC 20A/115VAC LEAKAGE CURRENT <1mA / 240VAC PROTECTION OVER VOLTAGE OVER TEMPERATURE FUNCTION REMOTE CONTROL OUTPUT VOLTAGE TRIM WORKING TEMP. ENVIRONMENT SAFETY EMC (Note 4) SAFETY STANDARDS WITHSTAND VOLTAGE 85% 86.5% 2.5A/230VAC 40A/230VAC 105 ~ 135% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed 57.6 ~ 67.2V 13.8 ~ 16.2V 27.6 ~ 32.4V Protection type : Shut down o/p voltage, re-power on to recover 80 5 (TSW1 : detect on heatsink of power transistor) Protection type : Shut down o/p voltage, recovers automatically after temperature goes down 4 ~ 10VDC power off, <0 ~ 0.8VDC power on 4.8 ~ 26.4V 2.4 ~ 13.2V -20 ~ +65 (Refer to output load derating curve) 9.6 ~ 52.8V UL60950-1, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B EMS IMMUNITY ISOLATION RESISTANCE NOTE PF>0.98/115VAC at full load 20 ~ 90% RH non-condensing WORKING HUMIDITY STORAGE TEMP., HUMIDITY -40 ~ +85 , 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0 ~ 50 VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes HARMONIC CURRENT OTHERS 124 ~ 370VDC POWER FACTOR (Typ.) OVERLOAD 2500ms, 50ms/115VAC at full load / 70% RH Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC MTBF 207K hrs min. MIL-HDBK-217F (25 DIMENSION 215*115*50mm (L*W*H) PACKING 1.1Kg; 12pcs/14Kg/0.92CUFT ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com) 5. Derating may be needed under low input voltages. Please check the derating curve for more details. File Name:SPV-300-SPEC 2010-10-18 SUPSVP -33202005 sseerriiee ss 300W Single Output with PFC Function Mechanical Specification Case No. 912G Unit:mm 117.5 32.5 150 177.5 27.5 36.7 19 +V ADJ. 9 8 115 95 6 50 135 9.5 7 5 48.7 4-M4 L=5mm 5-M3 L=3mm 2 16 5 10 1 37.5 32.5 8 3 50.5 4 15 215 150 32.5 Terminal Pin No. Assignment : 25 50 14 max. Air flow direction Assignment AC/L AC/N FG RC Pin No. 1 2 3 4 Assignment Pin No. PV 5 DC OUTPUT -V 6~7 DC OUTPUT+V 8~9 6-M4 L=5mm Block Diagram fosc : 100KHz FAN SPEED CONTROL ACTIVE INRUSH CURRENT LIMITING EMI FILTER I/P RECTIFIERS FG O.L.P. FAN RECTIFIERS & FILTER POWER SWITCHING +V -V PV DETECTION CIRCUIT PWM & PFC CONTROL O.V.P. O.T.P. RC Derating Curve Static Characteristics Ta=25 100 80 LOAD (%) LOAD (%) 60 40 20 -20 0 10 20 30 40 50 AMBIENT TEMPERATURE ( ) 60 70 (HORIZONTAL) 100 300 90 250 80 200 70 150 60 100 50 50 40 25 88 90 95 100 115 135 155 175 195 230 264 INPUT VOLTAGE (VAC) 60Hz File Name:SPV-300-SPEC 2010-10-18 SUPSVP -320205 sseerrii eess 300W Single Output with PFC Function Function Manual 1.External Voltage Control Vout 120 -V PV 1~5.5V -V LOAD 100 80 OUTPUT CURRENT (%) -V 100 +V OUTPUT VOLTAGE (%) +V Non-Linear 60 40 20 1 2 3 4 5 5.5 6 EXTERNAL VOLTAGE (DC) V 80 60 40 20 20 40 60 80 100 110 120 V OUTPUT VOLTAGE (%) File Name:SPV-300-SPEC 2010-10-18