SSM3J05FU TOSHIBA Field Effect Transistor Silicon P Channel MOS Type SSM3J05FU Power Management Switch High Speed Switching Applications Unit: mm · Small package · Low on resistance : Ron = 3.3 Ω (max) (@VGS = −4 V) · Low gate threshold voltage : Ron = 4.0 Ω (max) (@VGS = −2.5 V) Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit Drain-source voltage VDS -20 V Gate-source voltage VGSS ±12 V DC ID -200 Pulse IDP -400 Drain current Drain power dissipation (Ta = 25°C) PD (Note 1) mA 150 mW Channel temperature Tch 150 °C Storage temperature range Tstg -55~150 °C Note 1: Mounted on FR4 board. 2 (25.4 mm ´ 25.4 mm ´ 1.6 t, Cu pad: 0.6 mm ´ 3) Marking JEDEC ― JEITA SC-70 TOSHIBA 2-2E1E Weight: 0.006 g (typ.) Equivalent Circuit Handling Precaution When handling individual devices (which are not yet mounting on a circuit board), be sure that the environment is protected against electrostatic electricity. Operators should wear anti-static clothing, and containers and other objects that come into direct contact with devices should be made of anti-static materials. 1 2003-03-27 SSM3J05FU Electrical Characteristics (Ta = 25°C) Characteristics Gate leakage current Drain-source breakdown voltage Drain cut-off current Symbol IGSS V (BR) DSS IDSS Test Condition VGS = ±12 V, VDS = 0 ID = -1 mA, VGS = 0 VDS = -20 V, VGS = 0 Min Typ. Max Unit ¾ ¾ ±1 mA -20 ¾ ¾ V ¾ ¾ -1 mA Vth VDS = -3 V, ID = -0.1 mA -0.6 ¾ -1.1 V Forward transfer admittance ïYfsï VDS = -3 V, ID = -50 mA (Note 2) 100 ¾ ¾ mS Drain-source ON resistance RDS (ON) ID = -100 mA, VGS = -4 V (Note 2) ¾ 2.1 3.3 ID = -50 mA, VGS = -2.5 V (Note 2) ¾ 3.2 4.0 Gate threshold voltage W Input capacitance Ciss VDS = -3 V, VGS = 0, f = 1 MHz ¾ 27 ¾ pF Reverse transfer capacitance Crss VDS = -3 V, VGS = 0, f = 1 MHz ¾ 7 ¾ pF Output capacitance Coss VDS = -3 V, VGS = 0, f = 1 MHz ¾ 21 ¾ pF VDD = -3 V, ID = -50 mA, VGS = 0~-2.5 V ¾ 70 ¾ ¾ 70 ¾ Switching time Turn-on time ton Turn-off time toff ns Note 2: Pulse test Switching Time Test Circuit Precaution Vth can be expressed as voltage between gate and source when low operating current value is ID = -100 mA for this product. For normal switching operation, VGS (ON) requires higher voltage than Vth and VGS (off) requires lower voltage than Vth. (Relationship can be established as follows: VGS (off) < Vth < VGS (ON)) Please take this into consideration for using the device. VGS recommended voltage of -2.5 V or higher to turn on this product. 2 2003-03-27 SSM3J05FU 3 2003-03-27 SSM3J05FU 4 2003-03-27 SSM3J05FU RESTRICTIONS ON PRODUCT USE 000707EAA · TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. · The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. · The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. · The information contained herein is subject to change without notice. 5 2003-03-27