39 390-035 Submersible EMI/RFI Cable Sealing Backshell with Strain Relief Type G - Direct Coupling - Low Profile CONNECTOR DESIGNATORS * 390 F S 035 M 18 06 A 6 A-B -C-D-E-F G-H-J-K-L-S Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Product Series Connector Designator Strain Relief Style (H, A, M, D) Angle and Profile A = 90 B = 45 S = Straight * Conn. Desig. B See Note 4 DIRECT COUPLING TYPE G INDIVIDUAL AND/OR OVERALL SHIELD TERMINATION Cable Entry (Tables X, XI) Shell Size (Table I) Finish (Table II) Basic Part No. Length ± .060 (1.52) Min. Order Length 2.0 Inch (See Note 3) .780 (19.8) Max A Thread (Table I) O-Rings B (Table I) J E G J (Table III)(Table IV) (Table III) (Table IV) F (Table IV) B (Table I) B (Table I) 1.680 (42.7) Ref. H (Table IV) 1.680 (42.7) Ref. STYLE H Heavy Duty (Table X) STYLE A Medium Duty (Table XI) W T Cable Range © 2005 Glenair, Inc. V Cable Range STYLE M Medium Duty (Table XI) STYLE D Medium Duty (Table XI) .135 (3.4) Max X Y CAGE Code 06324 Cable Range Y Cable Entry Z Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 39 - Page 76 www.glenair.com 39 390-035 Submersible EMI/RFI Cable Sealing Backshell with Strain Relief Type G - Direct Coupling - Low Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. Shell Size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 28/29 32/33 36 40 Dash No. 04 06 08 10 12 16 20 24 28 32 TABLE III: FRONT ADAPTER J Max - Conn. Designator A-E-F D-B-G-K J-H-L-S C 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.735 (44.1) 1.180 (30.0) 1.250 (31.8) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 2.190 (55.6) 1.915 (48.6) TABLE IV: ELBOW DIMENSIONS Elbow E F G Size Max Max Max 03 .500 (12.7) 1.250 (31.8) .520 (13.2) 04 .500 (12.7) 1.610 (40.9) .520 (13.2) 06 .590 (15.0) 1.730 (43.9) .580 (14.7) 08 .610 (15.5) 1.750 (44.5) .640 (16.3) 10 .700 (17.8) 1.820 (46.2) .730 (18.5) 12 .880 (22.4) 2.080 (52.8) .920 (23.4) 16 .970 (24.6) 2.190 (55.6) 1.020 (25.9) 20 1.120 (28.4) 2.190 (55.6) 1.040 (26.4) 24 1.220 (31.0) 2.360 (59.9) 1.040 (26.4) 28 1.570 (39.9) 2.610 (66.3) 1.090 (27.7) 32 1.770 (45.0) 2.780 (70.6) 1.180 (30.0) TABLE X: : CABLE ENTRY Cable Range V T Max Min Max Max .957 (24.3) .125 (3.2) .312 (7.9) .780 (19.8) .250 (6.4) .437 (11.1) .780 (19.8) 1.145 (29.1) .387 (9.8) .562 (14.3) .780 (19.8) 1.332 (33.8) .350 (8.9) .625 (15.9) .780 (19.8) 1.332 (33.8) .500 (12.7) .750 (19.1) .811 (20.6) 1.551 (39.4) .625 (15.9) .937 (23.8) .905 (23.0) 1.770 (45.0) .875 (22.2) 1.250 (31.8) 1.092 (27.7) 2.113 (53.7) 1.124 (28.5) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 1.399 (35.5) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 1.399 (35.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 1. Metric dimensions (mm) are indicated in parentheses. 2. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 3. Consult factory for shorter lengths on straight backshells. 4. When using Connector Designator B refer to pages 18 and 19 for part number development. TABLE XI: CABLE ENTRY Y X Dash Z W Max Max No. Max Max .843 (21.4) .630 (16.0) 03* .437 (11.1) .760 (19.3) .906 (23.0) .755 (19.2) 04* .437 (11.1) .760 (19.3) 06* .500 (12.7) .760 (19.3) 1.093 (27.8) .942 (23.9) 08 .563 (14.3) .760 (19.3) 1.187 (30.1) 1.067 (27.1) 10 .563 (14.3) .760 (19.3) 1.281 (32.5) 1.192 (30.3) 12 .563 (14.3) .760 (19.3) 1.500 (38.1) 1.380 (35.1) 16 .656 (16.7) 1.073 (27.3) 1.719 (43.7) 1.535 (39.0) 20 .656 (16.7) 1.323 (33.6) 2.062 (52.4) 1.848 (46.9) 24 .656 (16.7) 1.323 (33.6) 2.312 (58.7) 2.255 (57.3) 28 1.188 (30.2) 1.572 (39.9) 2.719 (69.1) 2.505 (63.6) 32* 1.187 (30.1) 1.572 (39.9) 2.969 (75.4) 2.755 (70.0) * Not available in Style M clamp. © 2005 Glenair, Inc. CAGE Code 06324 H Max 1.140 (29.0) 1.170 (29.7) 1.650 (41.9) 1.720 (43.7) 1.800 (45.7) 1.910 (48.5) 2.100 (53.3) 2.250 (57.2) 2.300 (58.4) 2.400 (61.0) 2.600 (66.0) Cable Range Min ** Max .156 (4.0) .250 (6.4) .188 (4.8) .312 (7.9) .281 (7.1) .438 (11.1) .387 (9.8) .562 (14.3) .375 (9.5) .625 (15.9) .438 (11.1) .750 (19.1) .625 (15.9) .938 (23.8) .875 (22.2) 1.250 (31.8) 1.000 (25.4) 1.375 (34.9) 1.250 (31.8) 1.625 (41.3) 1.437 (36.5) 1.875 (47.6) ** Not Applicable Style D Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 39 - Page 77 www.glenair.com