Z-Power LED X10490 Technical Data Sheet Specification THBTGFR5210-CE SSC Drawn Approval CUSTOMER Approval Rev. 00 September 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet CONTENTS 1. Absolute Maximum Ratings 2. Electro Characteristics 3. Outline Dimension 4. Electro-Optical characteristic Diagram 5. Rank Division 6. Packing 7. Soldering 8. Precaution for use Rev. 00 September 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet THBTGFR5210-CE Description - Small size suitable for compact appliances. - 3-chip in one Package - Surface-mounted chip LED device. - Pb-free and RoHS complaint THBTGFR5210-CE Features • 3.0 (W) X 1.35 (D) X 1.0 (T) mm • Dominant Wavelength : - Red: 625 nm - Green:530 nm - Blue: 472nm component. - Tape and Reel packing. - All Color are available - Increases the life time of battery. Applications • Cellular phone’s keypad lightning • Other decoration lighting • Information Boards • Lighting for Small Size Device. Rev. 00 September 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 1. Absolute maximum ratings (Ta=25℃) Value Parameter Symbol Power Dissipation Pd Forward Current IF Peak Forward Current IFM *1 Reverse Voltage VR 5 V Operation Temperature Topr. -40 ~ 100 ℃ Storage Temperature Tstg. -40 ~ 100 ℃ Red Green Blue 60 90 90 Unit mW 25*2/15*3 100 mA 100 mA 100 *1 IFM conditions: Pulse width Tw≤0.1ms and Duty ratio≤1/10. *2 1-chip ON *3 3-chip ON 2. Electro-Optical Characteristics Parameter color Symbol Condition Min Typ Max IF=10㎃ 1.8 1.9 2.3 IF=10㎃ 2.7 3.0 3.5 Blue IF=10㎃ 2.7 2.9 3.3 Red IF=1㎂ 1.3 - 1.8 IF=1㎂ 1.8 - 2.7 IF=1㎂ 1.8 - 2.7 VR=5V - - 10 IF=10㎃ 120 170 200 IF=10㎃ 230 300 380 Blue IF=10㎃ 50 80 140 Red IF=10㎃ 615 625 635 IF=10㎃ 520 530 540 Blue IF=10㎃ 465 472 477 Red IF=10㎃ - 20 - IF=10㎃ - 35 - IF=10㎃ - 25 - IF=10 ㎃ - 150 - Red Green Forward Voltage Green VF VFm Blue Reverse Current Red IR Red Luminous Intensity*2 Wavelength Spectral Bandwidth Green Green Green IV λd Δλ Blue Viewing Angle*3 (Ta=25℃) R,G,B 2θ1/2 Unit V ㎂ mcd nm nm ˚ Rev. 00 September 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet ♦ Zener Diode의 전기적 특성 항목 조건 Min Typ Max Unit VF IF=10㎃ - - 1.6 V IR VR=5V - - 1.0 ㎂ *2 The luminous intensity IV is measured at the peak of the spatial pattern which may not be aligned with the mechanical axis of the LED package. *3 θ1/2 is the off-axis where the luminous intensity is 1/2 the peak intensity. [Note] All products confirm to the listed minimum and maximum specifications for electric and optical characteristics, when operated at 20mA within the maximum ratings shown above. All measurements were made under the standardized environment of SSC. (Tolerance : Iv ±10 %, λD ±2 nm, VF ±0.1 V) Rev. 00 September 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) 0.35 ( Tolerance: ±0.1, Unit: mm ) 0.5 2 0.45 1.0 1.0 3 4 1 3.0 R0.3 0.85 1.35 [Top view] [Side view] 2.0 0.4 Resin 0.5 Marking 1 2 3 0.42 0.4 4 0.22 0.47 1.35 1.0 0.32 2.2 0.45 PCB [Bottom view] [Inner Circuit Diagram] 1.4 Blue Red 2 2.0 3 3.8 Anode Common 0.6 1 0.55 4 0.9 0.3 Green Z-Power LED X10490 Technical Data Sheet 3.Outline Dimension [Recommended Solder Pattern] * MATERIALS PARTS MATERIALS Package BT_Resin Encapsulating Resin Epoxy Electrodes Au Plating Copper Alloy Rev. 00 September 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Forward Current vs. Forward Voltage (per die) (Ta=25 OC ) Forward Current IF[mA] 100 10 1 RED GREEN BLUE 0.1 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 Forward Voltage VF[V] Relative Luminous Intensity vs Forward Current (Ta=25 OC ) 180 160 Relative Intensity IV[%] Z-Power LED X10490 Technical Data Sheet 4. Electro-Optical characteristic Diagram 140 120 100 80 60 40 RED GREEN BLUE 20 0 0 5 10 15 20 25 Forward Current IF[mA] 30 35 40 Rev. 00 September 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) 40 35 Forward current IF[mA] Z-Power LED X10490 Technical Data Sheet Ambient Temperature vs. Allowable Forward Current (per die) 30 25 20 15 10 5 0 -25 0 25 50 75 100 Radiation Diagram (Ta=25 OC ) 120 60 30 150 180 0.5 0.5 0 Rev. 00 September 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 5. Rank Division λ[nm] (IF=10mA) VF[V] (IF=10mA) RED GREEN 2.70~2.90 BLUE RED GREEN 2.70~2.90 615~635 520~540 2.90~3.10 615~635 520~540 3.10~3.30 2.70~2.90 2.90~3.10 2.90~3.10 3.10~3.30 615~635 615~635 615~635 615~635 IV [mcd] (IF=10mA) RANK BLUE RED GREEN BLUE 465~472 120~200 230~380 50~140 01 472~477 120~200 230~380 50~140 02 465~472 120~200 230~380 50~140 03 472~477 120~200 230~380 50~140 04 465~472 120~200 230~380 50~140 05 472~477 120~200 230~380 50~140 06 465~472 120~200 230~380 50~140 07 472~477 120~200 230~380 50~140 08 465~472 120~200 230~380 50~140 09 472~477 120~200 230~380 50~140 10 465~472 120~200 230~380 50~140 11 472~477 120~200 230~380 50~140 12 465~472 120~200 230~380 50~140 13 472~477 120~200 230~380 50~140 14 465~472 120~200 230~380 50~140 15 472~477 120~200 230~380 50~140 16 465~472 120~200 230~380 50~140 17 472~477 120~200 230~380 50~140 18 465~472 120~200 230~380 50~140 19 472~477 120~200 230~380 50~140 20 465~472 120~200 230~380 50~140 21 472~477 120~200 230~380 50~140 22 465~472 120~200 230~380 50~140 23 472~477 120~200 230~380 50~140 24 520~540 520~540 520~540 520~540 1.80~2.00 2.70~2.90 3.10~3.30 2.90~3.10 3.10~3.30 2.70~2.90 3.30~3.5 2.90~3.10 3.10~3.30 615~635 615~635 615~635 615~635 615~635 615~635 520~540 520~540 520~540 520~540 520~540 520~540 Rev. 00 September 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 2.70~2.90 2.70~2.90 2.90~3.10 3.10~3.30 2.70~2.90 2.90~3.10 2.90~3.10 3.10~3.30 615~635 615~635 615~635 615~635 615~635 615~635 465~472 120~200 230~380 50~140 25 472~477 120~200 230~380 50~140 26 465~472 120~200 230~380 50~140 27 472~477 120~200 230~380 50~140 28 465~472 120~200 230~380 50~140 29 472~477 120~200 230~380 50~140 30 465~472 120~200 230~380 50~140 31 472~477 120~200 230~380 50~140 32 465~472 120~200 230~380 50~140 33 472~477 120~200 230~380 50~140 34 465~472 120~200 230~380 50~140 35 472~477 120~200 230~380 50~140 36 465~472 120~200 230~380 50~140 37 472~477 120~200 230~380 50~140 38 465~472 120~200 230~380 50~140 39 472~477 120~200 230~380 50~140 40 465~472 120~200 230~380 50~140 41 472~477 120~200 230~380 50~140 42 465~472 120~200 230~380 50~140 43 472~477 120~200 230~380 50~140 44 465~472 120~200 230~380 50~140 45 472~477 120~200 230~380 50~140 46 465~472 120~200 230~380 50~140 47 472~477 120~200 230~380 50~140 48 465~472 120~200 230~380 50~140 49 472~477 120~200 230~380 50~140 50 465~472 120~200 230~380 50~140 51 472~477 120~200 230~380 50~140 52 465~472 120~200 230~380 50~140 53 472~477 120~200 230~380 50~140 Rev. 54 00 520~540 520~540 520~540 520~540 520~540 520~540 2.0~2.20 2.70~2.90 3.10~3.30 2.90~3.10 3.10~3.30 2.70~2.90 3.30~3.5 2.90~3.10 3.10~3.30 2.70~2.90 2.2~2.40 2.70~2.90 2.90~3.10 3.10~3.30 615~635 615~635 615~635 615~635 615~635 615~635 615~635 615~635 615~635 520~540 520~540 520~540 520~540 520~540 520~540 520~540 520~540 520~540 September 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 2.70~2.90 2.90~3.10 2.90~3.10 3.10~3.30 2.70~2.90 3.10~3.30 2.90~3.10 3.10~3.30 2.70~2.90 3.30~3.5 2.90~3.10 3.10~3.30 615~635 615~635 615~635 615~635 615~635 615~635 615~635 615~635 615~635 465~472 120~200 230~380 50~140 55 472~477 120~200 230~380 50~140 56 465~472 120~200 230~380 50~140 57 472~477 120~200 230~380 50~140 58 465~472 120~200 230~380 50~140 59 472~477 120~200 230~380 50~140 60 465~472 120~200 230~380 50~140 61 472~477 120~200 230~380 50~140 62 465~472 120~200 230~380 50~140 63 472~477 120~200 230~380 50~140 64 465~472 120~200 230~380 50~140 65 472~477 120~200 230~380 50~140 66 465~472 120~200 230~380 50~140 67 472~477 120~200 230~380 50~140 68 465~472 120~200 230~380 50~140 69 472~477 120~200 230~380 50~140 70 465~472 120~200 230~380 50~140 71 472~477 120~200 230~380 50~140 72 520~540 520~540 520~540 520~540 520~540 520~540 520~540 520~540 520~540 Rev. 00 September 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) ±0.1 4.0 ±0.1 1.1±0.1 180 1.5 8.0 ±0.2 0.2 ±0.05 (2.75) 3.5 ±0.05 1.75 2.0 ±0.05 +0.1 1.5 -0 3.55±0.1 ±0.1 1.2 ±0.1 11.4 +0 -3 9 ±0.3 2a +0.2 -0 2 ±0.2 60 Z-Power LED X10490 Technical Data Sheet 6. Packing 22 13 ±0.2 Label Tolerance: ±0.2, Unit: ㎜ (1) Quantity:3,000pcs./Reel (2) Cumulative Tolerance: Cumulative Tolerance/10pitches to be ±0.2mm (3) Adhesion Strength of Cover Tape: Adhesion strength to be 0.1-0.7N when the over tape is turned off from the carrier tape at10˚angle to be the carrier tape. (4) Package: P/N, Manufacturing data Code No. and quantity to be indicated on a damp proof Package. Rev. 00 September 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Reel # # # # # # # # # # : N / P ## 제품명 : SSC-THBTGFR5210-CE # # # # # # # # # # o N t o L Z-Power LED X10490 Technical Data Sheet ● Reel Packing Structure 수량 : 3000 Aluminum Vinyl Bag # # # # # # # # # # : N / P ## 제품명 : SSC-THBTGFR5210-CE # # # # # # # # # # o N t o L 수량 : 3000 Outer Box *Material: Paper(SW3B(B)) SIZE(mm) TYPE a 7inch 245 c b 220 142 c CHIP LED TUV MADE IN KOREA Acriche PART : SSC-THBTGFR5210-CE CODE : Q'YT : 30,000EA Semiconductor EcoLight LOT NO : RoHS b a DATE : SEOUL SEMICONDUCTOR CO.,LTD Rev. 00 September 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 7. Soldering (1) Lead Solder Lead Solder Lead Solder 2.5~5 o C / sec. Pre-heat 120~150℃ Pre-heat time 120 sec. Max. Peak-Temperature 240℃ Max. Soldering time Condition 10 sec. Max. 2.5~5 C / sec. Pre-heating 120~150 oC 240 oC Max. 10 sec. Max. 60sec. Max. Above 200 oC 120sec. Max. (2) Lead-Free Solder Lead-frame Solder 1~5 o C / sec. Lead Free Solder Pre-heat 150~200℃ Pre-heat time 120 sec. Max. Peak-Temperature 260℃ Max. Soldering time Condition 10 sec. Max. 1~5 o C / sec. Pre-heating 150~200 o C 260 oC Max. 10 sec. Max. 60sec. Max. Above 220 oC 120sec. Max. (3) Hand Soldering conditions Do not exceed 3 seconds at maximum 280ºC under soldering iron. (4) The encapsulated material of the LEDs is silicone. Precautions should be taken to avoid the strong pressure on the encapsulated part. So when using the chip mounter, the picking up nozzle that does not affect the silicone resign should be used. Note : In case that the soldered products are reused in soldering process, we don’t guarantee the products. Rev. 00 September 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 8. Precaution for use (1) Storage In order to avoid the absorption of moisture, it is recommended to store in a dry box (or a desiccator) with a desiccant. Otherwise, to store them in the following environment is recommended. Temperature : 5ºC ~30ºC Humidity : maximum 65%RH (2) Attention after open. LED is correspond to SMD, when LED be soldered dip, interfacial separation may affect the light transmission efficiency, causing the light intensity to drop. Attention in followed; a. After opened and mounted the soldering shall be quickly. b. Keeping of a fraction Temperature : 5 ~ 40ºC Humidity : less than 30% (3) In the case of more than 1 week passed after opening or change color of indicator on desiccant, components shall be dried 10-12hr. at 60±5ºC. (4) Any mechanical force or any excess vibration shall not be accepted to apply during cooling process to normal temperature after soldering. (5) Quick cooling shall be avoided. (6) Components shall not be mounted on warped direction of PCB. (7) Anti radioactive ray design is not considered for the products. (8) This device should not be used in any type of fluid such as water, oil, organic solvent etc. When washing is required, IPA should be used. (9) When the LEDs are illuminating, operating current should be decided after considering the ambient maximum temperature. (10) LEDs must be stored to maintain a clean atmosphere. If the LEDs are stored for 3 months or more after being shipped from SSC, a sealed container with a nitrogen atmosphere should be used for storage. (11) The LEDs must be soldered within seven days after opening the moisture-proof packing. (12) Repack unused products with anti-moisture packing, fold to close any opening and then store in a dry place. (13) The appearance and specifications of the product may be modified for improvement without notice. Rev. 00 September 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00)