39 390-056 Submersible EMI/RFI Cable Sealing Backshell with Strain Relief Type E - Rotatable Coupling - Low Profile CONNECTOR DESIGNATORS 390 F S 056 M 16 10 D M 6 Product Series A-F-H-L-S Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Connector Designator ROTATABLE COUPLING TYPE E INDIVIDUAL AND/OR OVERALL SHIELD TERMINATION Angle and Profile A = 90 B = 45 S = Straight Strain Relief Style (H, A, M, D) Basic Part No. Cable Entry (Tables X, XI) Finish (Table II) Shell Size (Table I) Termination (Note 6) D = 2 Rings, T = 3 Rings Length * Length ± .060 (1.52) A Thread Minimum Order Length 2.0 Inch (Table I) (See Note 4) O-Rings 1.281 (32.5) Ref. Typ. C Typ. (Table I) G (Table III) E (Table III) STYLE 2 (STRAIGHT See Note 1) * Length ± .060 (1.52) Minimum Order Length 1.5 Inch (See Note 4) F (Table III) .88 (22.4) Max H (Table III) Now Available with the NESTOR Glenair’s Non-Detent, Spring-Loaded, SelfLocking Coupling. Add “-445” to Specify This AS85049 Style “N” Coupling Interface. STYLE 2 (45° & 90° See Note 1) STYLE H Heavy Duty (Table X) STYLE A Medium Duty (Table XI) W T Cable Range © 2005 Glenair, Inc. V Cable Range STYLE M Medium Duty (Table XI) X Y CAGE Code 06324 Cable Range STYLE D Medium Duty (Table XI) .135 (3.4) Max Y Cable Entry Z Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 39 - Page 46 39 390-056 Submersible EMI/RFI Cable Sealing Backshell with Strain Relief Type E - Rotatable Coupling - Low Profile TABLE III: ELBOW DIMENSIONS Shell Size E F G Conn. Desig. A-F-L-S H Max Max Max 08 09 .457 (11.6) 1.760 (44.7) .500 (12.7) 10 11 .520 (13.2) 1.920 (48.8) .595 (15.1) 12 13 .582 (14.8) 1.990 (50.5) .610 (15.5) 15 14 .645 (16.4) 2.144 (54.5) .700 (17.8) 16 17 .738 (18.7) 2.254 (57.3) .885 (22.5) 18 19 .926 (23.5) 2.444 (62.1) .975 (24.8) 20 21 .926 (23.5) 2.444 (62.1) .975 (24.8) 23 1.020 (25.9) 2.657 (67.5) 1.125 (28.6) 22 24 25 1.020 (25.9) 2.657 (67.5) 1.125 (28.6) 28 1.145 (29.1) 2.690 (68.3) 1.225 (31.1) 32 1.207 (30.7) 2.790 (70.9) 1.575 (40.0) 36 1.238 (31.4) 2.930 (74.4) 1.775 (45.1) Dash No. 04 06 08 10 12 16 20 24 28 32 H Max 1.880 (47.8) 1.990 (50.5) 2.020 (51.3) 2.154 (54.7) 2.244 (57.0) 2.414 (61.3) 2.414 (61.3) 2.587 (65.7) 2.587 (65.7) 2.740 (69.6) 2.990 (75.9) 3.040 (77.2) TABLE X: CABLE ENTRY T V Cable Range Max Max Min Max .780 (19.8) .957 (24.3) .125 (3.2) .312 (7.9) .780 (19.8) 1.145 (29.1) .250 (6.4) .437 (11.1) .780 (19.8) 1.332 (33.8) .387 (9.8) .562 (14.3) .780 (19.8) 1.332 (33.8) .350 (8.9) .625 (15.9) .811 (20.6) 1.551 (39.4) .500 (12.7) .750 (19.1) .905 (23.0) 1.770 (45.0) .625 (15.9) .937 (23.8) 1.092 (27.7) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 1.124 (28.5) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 1.399 (35.5) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 1.399 (35.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) TABLE XI: CABLE ENTRY Dash W X Y Z No. Max Max Max Max 03* .437 (11.1) .760 (19.3) .843 (21.4) .630 (16.0) 04* .437 (11.1) .760 (19.3) .906 (23.0) .755 (19.2) 06* .500 (12.7) .760 (19.3) 1.093 (27.8) .942 (23.9) 08 .563 (14.3) .760 (19.3) 1.187 (30.1) 1.067 (27.1) 10 .563 (14.3) .760 (19.3) 1.281 (32.5) 1.192 (30.3) 12 .563 (14.3) .760 (19.3) 1.500 (38.1) 1.380 (35.1) 16 .656 (16.7) 1.073 (27.3) 1.719 (43.7) 1.535 (39.0) 20 .656 (16.7) 1.323 (33.6) 2.062 (52.4) 1.848 (46.9) 24 .656 (16.7) 1.323 (33.6) 2.312 (58.7) 2.255 (57.3) 28 1.188 (30.2) 1.572 (39.9) 2.719 (69.1) 2.505 (63.6) 32* 1.187 (30.1) 1.572 (39.9) 2.969 (75.4) 2.755 (70.0) 40* 1.125 (28.6) 1.572 (39.9) 3.531 (89.7) 3.255 (82.7) * Not available in Style M clamp. © 2005 Glenair, Inc. CAGE Code 06324 See inside back cover fold-out or pages 13 and 14 for Tables I and II. 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G and H will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on straight backshells. 5. Interface O-Ring not supplied with connector designator A. 6. Designate Symbol T for 3 ring termination of individual and overall braid. Designate D for standard 2 ring termination of individual or overall braid. Cable Range Min ** Max .156 (4.0) .250 (6.4) .188 (4.8) .312 (7.9) .281 (7.1) .438 (11.1) .387 (9.8) .562 (14.3) .375 (9.5) .625 (15.9) .438 (11.1) .750 (19.1) .625 (15.9) .938 (23.8) .875 (22.2) 1.250 (31.8) 1.000 (25.4) 1.375 (34.9) 1.250 (31.8) 1.625 (41.3) 1.437 (36.5) 1.875 (47.6) 1.875 (47.6) 2.375 (60.3) ** Not Applicable Style D Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 39 - Page 47