TI TLV2772QPWRQ1

TLV277x-Q1, TLV277xA-Q1
FAMILY OF 2.7-V HIGH-SLEW-RATE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SGLS179D− SEPTEMBER 2003 − REVISED AUGUST 2008
D
D
D
D
D
D
D
D
D
D
D
D
D
Qualified for Automotive Applications
High Slew Rate . . . 10.5 V/µs Typ
High-Gain Bandwidth . . . 5.1 MHz Typ
Supply Voltage Range 2.5 V to 5.5 V
Rail-to-Rail Output
360-µV Input Offset Voltage
Low Distortion Driving 600-Ω . . .
0.005% THD+N
1-mA Supply Current (Per Channel)
17-nV/√Hz Input Noise Voltage
2-pA Input Bias Current
Characterized From TA = −40°C to 125°C
Available in MSOP and SOT-23 Packages
Micropower Shutdown Mode . . . IDD < 1 µA
description
The TLV277x CMOS operational amplifier family combines high slew rate and bandwidth, rail-to-rail output
swing, high output drive, and excellent dc-precision. The device provides 10.5 V/µs of slew rate and 5.1 MHz
of bandwidth while only consuming 1 mA of supply current per channel. This ac-performance is much higher
than current competitive CMOS amplifiers. The rail-to-rail output swing and high output drive make these
devices a good choice for driving the analog input or reference of analog-to-digital converters. These devices
also have low distortion while driving a 600-Ω load for use in telecom systems.
These amplifiers have a 360-µV input offset voltage, a 17 nV/√Hz input noise voltage, and a 2-pA input bias
current for measurement, medical, and industrial applications. The TLV277x family is also specified across an
extended temperature range (−40°C to 125°C), making it useful for automotive systems.
These devices operate from a 2.5-V to 5.5-V single supply voltage and are characterized at 2.7 V and 5 V. The
single-supply operation and low power consumption make these devices a good solution for portable
applications. The following table lists the packages available.
FAMILY PACKAGE TABLE
NUMBER
OF
CHANNELS
SOIC
TSSOP
SOT-23
TLV2770
1
8
—
—
Yes
TLV2771
1
8
—
5
—
TLV2772
2
8
8
—
—
TLV2773
2
14
—
—
Yes
TLV2774
4
14
14
—
—
TLV2775
4
16
16
—
Yes
DEVICE
PACKAGE TYPES
SHUTDOWN
UNIVERSAL
EVM BOARD
See the EVM
Selection Guide
(SLOU060)
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright  2008 Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
TLV277x-Q1, TLV277xA-Q1
FAMILY OF 2.7-V HIGH-SLEW-RATE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SGLS179D− SEPTEMBER 2003 − REVISED AUGUST 2008
A SELECTION OF SINGLE-SUPPLY OPERATIONAL AMPLIFIER PRODUCTS†
†
DEVICE
VDD
(V)
BW
(MHz)
SLEW RATE
(V/µs)
IDD (per channel)
(µA)
TLV277x
2.5 − 6
5.1
10.5
1000
O
TLV247x
2.7 − 6
2.8
1.5
600
I/O
TLV245x
2.7 − 6
0.22
0.11
23
I/O
TLV246x
2.7 − 6
6.4
1.6
550
I/O
RAIL-TO-RAIL
All specifications measured at 5 V.
ORDERING INFORMATION{
TA
VIOmax
AT 25°C
(mV)
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
2.5
SOIC (D)
Tape and reel
TLV2770QDRQ1§
1.6
SOIC (D)
Tape and reel
TLV2770AQDRQ1§
2.5
SOT-23 (DBV)
Tape and reel
TLV2771QDBVRQ1
2.5
SOIC (D)
Tape and reel
TLV2771QDRQ1§
1.6
SOIC (D)
Tape and reel
TLV2771AQDRQ1§
SOIC (D)
Tape and reel
TLV2772QDRQ1
TLV2772QI
TSSOP (PW)
Tape and reel
TLV2772QPWRQ1
TLV2772QI
SOIC (D)
Tape and reel
TLV2772AQDRQ1
TLV2772AQ
TSSOP (PW)
Tape and reel
TLV2772AQPWRQ1
TLV2772AQ
2.5
SOIC (D)
Tape and reel
TLV2773QDRQ1§
1.6
SOIC (D)
Tape and reel
TLV2773AQDRQ1§
SOIC (D)
Tape and reel
TLV2774QDRQ1§
TSSOP (PW)
Tape and reel
TLV2774QPWRQ1§
SOIC (D)
Tape and reel
TLV2774AQDRQ1§
TSSOP (PW)
Tape and reel
TLV2774AQPWRQ1§
SOIC (D)
Tape and reel
TLV2775QDRQ1§
TSSOP (PW)
Tape and reel
TLV2775QPWRQ1§
SOIC (D)
Tape and reel
TLV2775AQDRQ1§
TSSOP (PW)
Tape and reel
TLV2775AQPWRQ1§
25
2.5
16
1.6
−40°C
40 C to 125
125°C
C
PACKAGE‡
27
2.7
21
2.1
27
2.7
21
2.1
†
VBPQ
For the most current package and ordering information, see the Package Option Addendum at the end of this document,
or see the TI web site at http://www.ti.com.
‡ Package drawings, thermal data, and symbolization are available at http://www.ti.com/packaging.
§ Product Preview
2
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLV277x-Q1, TLV277xA-Q1
FAMILY OF 2.7-V HIGH-SLEW-RATE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SGLS179D− SEPTEMBER 2003 − REVISED AUGUST 2008
TLV277x PACKAGE PINOUTS
TLV2770†
D PACKAGE
(TOP VIEW)
NC
IN −
IN +
GND
1
8
2
7
3
6
4
5
TLV2771†
D PACKAGE
(TOP VIEW)
SHDN
VDD
OUT
NC
TLV2772
D OR PW PACKAGE
(TOP VIEW)
1OUT
1IN −
1IN +
GND
1
8
2
7
3
6
4
5
VDD
2OUT
2IN −
2IN+
NC
IN −
IN +
GND
1OUT
1IN −
1IN+
GND
NC
1SHDN
NC
1
8
2
7
3
6
4
5
TLV2771
DBV PACKAGE
(TOP VIEW)
NC
VDD
OUT
NC
OUT
1
GND
2
IN+
3
5
VDD
4
IN −
TLV2773†
D PACKAGE
TLV2774†
D OR PW PACKAGE
(TOP VIEW)
(TOP VIEW)
1
14
2
13
3
12
4
11
5
10
6
9
7
8
VDD
2OUT
2IN −
2IN+
NC
2SHDN
NC
1OUT
1IN −
1IN+
VDD
2IN+
2IN −
2OUT
1
14
2
13
3
12
4
11
5
10
6
9
7
8
4OUT
4IN −
4IN+
GND
3IN+
3IN −
3OUT
TLV2775†
D OR PW PACKAGE
(TOP VIEW)
1OUT
1IN −
1IN+
VDD
2IN+
2IN −
2OUT
1/2SHDN
1
16
2
15
3
14
4
13
5
12
6
11
7
10
8
9
4OUT
4IN −
4IN+
GND
3IN +
3IN−
3OUT
3/4SHDN
NC − No internal connection
This device is in the Product Preview stage of development. Contact your local Texas Instruments sales office for availability.
†
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
3
TLV277x-Q1, TLV277xA-Q1
FAMILY OF 2.7-V HIGH-SLEW-RATE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SGLS179D− SEPTEMBER 2003 − REVISED AUGUST 2008
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage, VDD (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±VDD
Input voltage range, VI (any input, see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.3 V to VDD
Input current, II (any input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±4 mA
Output current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 mA
Total current into VDD + . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 mA
Total current out of GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 mA
Duration of short-circuit current (at or below) 25°C (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unlimited
Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table
Operating free-air temperature range, TA: Q suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −40°C to 125°C
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values, except differential voltages, are with respect to GND .
2. Differential voltages are at the noninverting input with respect to the inverting input. Excessive current flows when input is brought
below GND − 0.3 V.
3. The output may be shorted to either supply. Temperature and /or supply voltages must be limited to ensure that the maximum
dissipation rating is not exceeded.
ESD RATING TABLE
Human Body Model (4)
Charged-Device Model
ESD rating
2 (H1C)
(4)
kV
1 (C5)
Machine Model (4)
150 (M2)
V
Machine Model (5)
100 (M1)
V
NOTE 4: ESD protection level per AEC Q100 Classification TLV2771QDBVRQ1
NOTE 5: ESD protection level per AEC Q100 Classification TLV2772QPWRG4Q1
DISSIPATION RATING TABLE
PACKAGE
TA ≤ 25
25°C
C
POWER RATING
DERATING FACTOR
ABOVE TA = 25°C
TA = 70
70°C
C
POWER RATING
TA = 85
85°C
C
POWER RATING
TA = 125
125°C
C
POWER RATING
D
725 mW
5.8 mW/°C
464 mW
377 mW
145 mW
DBV
437 mW
3.5 mW/°C
280 mW
227 mW
87 mW
PW
700 mW
5.6 mW/°C
448 mW
364 mW
140 mW
recommended operating conditions
Q SUFFIX
MIN
Supply voltage, VDD
2.5
MAX
6
UNIT
V
Input voltage range, VI
GND
VDD + −1.3
V
Common-mode input voltage, VIC
GND
VDD + −1.3
V
Operating free-air temperature, TA
−40
125
°C
4
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLV277x-Q1, TLV277xA-Q1
FAMILY OF 2.7-V HIGH-SLEW-RATE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SGLS179D− SEPTEMBER 2003 − REVISED AUGUST 2008
electrical characteristics at specified free-air temperature, VDD = 2.7 V (unless otherwise noted)
PARAMETER
VIO
Input offset voltage
αVIO
Temperature coefficient of input
offset voltage
IIO
Input offset current
IIB
Input bias current
TEST CONDITIONS
VIC = 0, VO = 0, RS = 50 Ω
VDD = ±1.35 V, No load
0, VO = 0
0, RS = 50 Ω
VIC = 0
675 mA
IOH = − 0
0.675
VOH
High level output voltage
High-level
IOH = − 2
2.2
2 mA
VIC = 1
1.35
35 V
V, IOL = 0.675
0 675 mA
VOL
Low level output voltage
Low-level
VIC = 1
1.35
35 V
V, IOL = 2.2
2 2 mA
†
‡
AVD
Large signal differential voltage
Large-signal
amplification
ri(d)
Differential input resistance
ci(c)
Common-mode input capacitance
zo
VIC = 1.35 V, RL = 10 kΩ},
VO = 0.6 V to 2.1 V
TA†
TLV2771-Q1
MIN
TYP
MAX
25°C
0.48
2.5
Full range
0.53
2.7
25 C to
25°C
125°C
2
25°C
1
60
2
125
25°C
2
60
Full range
6
350
25°C
2.6
2.5
25°C
2.4
Full range
2.1
25°C
0.1
Full range
0.2
25°C
0.21
Full range
0.6
25°C
20
Full range
13
mV
µV/°C
V/°C
Full range
Full range
UNIT
pA
pA
V
V
380
V/mV
25°C
1012
Ω
f = 10 kHz
25°C
8
pF
Closed-loop output impedance
f = 100 kHz, AV = 10
25°C
25
Ω
CMRR
Common mode rejection ratio
Common-mode
VIC = 0 to 1.5 V, VO = VDD /2,
RS = 50 Ω
kSVR
Supply voltage rejection ratio
(∆VDD /∆VIO)
VDD = 2.7 V to 5 V, VIC = VDD /2,
No load
IDD
Supply current (per channel)
VO = VDD /2,
/2 No load
25°C
60
84
Full range
60
82
25°C
70
89
Full range
70
84
25°C
Full range
1
dB
dB
2
2
mA
Full range is −40°C to 125°C for Q level part.
Referenced to 1.35 V
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5
TLV277x-Q1, TLV277xA-Q1
FAMILY OF 2.7-V HIGH-SLEW-RATE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SGLS179D− SEPTEMBER 2003 − REVISED AUGUST 2008
operating characteristics at specified free-air temperature, VDD = 2.7 V (unless otherwise noted)
PARAMETER
TA†
TEST CONDITIONS
25°C
SR
Slew rate at unity gain
Vn
Equivalent input noise voltage
VN(PP)
VO(PP) = 0
0.8
8V
V, CL = 100 pF
pF, RL = 10 kΩ
Full range
TLV2771-Q1
MIN
TYP
5
9
4.7
6
MAX
UNIT
V/ s
V/µs
f = 1 kHz
25°C
21
f = 10 kHz
25°C
17
Peak-to-peak
Peak
to peak equivalent input
noise voltage
f = 0.1 Hz to 1 Hz
25°C
0.33
f = 0.1 Hz to 10 Hz
25°C
0.86
µV
In
Equivalent input noise current
f = 100 Hz
25°C
0.6
fA /√Hz
THD + N
Total
T
t l harmonic
h
i distortion
di t ti plus
l
noise
RL = 600 Ω, f = 1 kHz
AV = 1
AV = 10
0.025%
0.12%
Gain-bandwidth product
f = 10 kHz, RL = 600 Ω, CL = 100 pF
25°C
4.8
25°C
0.186
Settling time
AV = −1,
0.85
1.85
V,
Step = 0
85 V to 1
85 V
RL = 600 Ω, CL = 100 pF
0.1%
ts
0.01%
25°C
3.92
φm
Phase margin at unity gain
25°C
46°
25°C
12
†
6
RL = 600 Ω,
Ω CL = 100 pF
Full range is − 40°C to 125°C.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
µV
0.0085%
25°C
25
C
AV = 100
Gain margin
nV/√Hz
MHz
µss
dB
TLV277x-Q1, TLV277xA-Q1
FAMILY OF 2.7-V HIGH-SLEW-RATE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SGLS179D− SEPTEMBER 2003 − REVISED AUGUST 2008
electrical characteristics at specified free-air temperature, VDD = 5 V (unless otherwise noted)
TEST
CONDITIONS
PARAMETER
VIO
Input offset voltage
αVIO
Temperature coefficient of input
offset voltage
IIO
Input offset current
IIB
Input bias current
VIC = 0, No load
VO = 0, RS = 50 Ω, VDD = ±2.5 V
0, VO = 0
0, RS = 50 Ω,
Ω VDD = ±2
±2.5
5V
VIC = 0
3 mA
IOH = − 1
1.3
VOH
High level output voltage
High-level
IOH = − 4
4.2
2 mA
VIC = 2
2.5
5V
V, IOL = 1
1.3
3 mA
VOL
Low level output voltage
Low-level
VIC = 2
2.5
5V
V, IOL = 4
4.2
2 mA
AVD
Large signal differential voltage
Large-signal
amplification
ri(d)
Differential input resistance
ci(c)
Common-mode input capacitance
zo
Closed-loop output impedance
CMRR Common-mode
Common mode rejection ratio
†
‡
2.5
5V
V, RL = 10 kΩ}, VO = 1 V to 4 V
VIC = 2
TA†
TLV2771-Q1
MIN
TYP
MAX
25°C
0.5
2.5
Full range
0.6
2.7
25 C to
25°C
125°C
2
25°C
1
60
2
125
25°C
2
60
Full range
6
350
25°C
4.9
4.8
25°C
4.7
Full range
4.4
25°C
0.1
Full range
0.2
25°C
0.21
Full range
0.6
25°C
20
Full range
13
mV
µV/°C
V/°C
Full range
Full range
UNIT
pA
pA
V
V
450
V/mV
25°C
1012
Ω
f = 10 kHz
25°C
8
pF
f = 100 kHz, AV = 10
25°C
20
Ω
VIC = 0 to 3.7 V,
VO = VDD /2, RS = 50 Ω
kSVR
Supply voltage rejection ratio
(∆VDD /∆VIO)
VDD = 2.7 V to 5 V,
VIC = VDD /2, No load
IDD
Supply current (per channel)
VO = VDD /2,
/2 No load
25°C
60
96
Full range
60
93
25°C
70
89
Full range
70
84
25°C
Full range
1
dB
dB
2
2
mA
Full range is − 40°C to 125°C for Q level part.
Referenced to 2.5 V
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
7
TLV277x-Q1, TLV277xA-Q1
FAMILY OF 2.7-V HIGH-SLEW-RATE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SGLS179D− SEPTEMBER 2003 − REVISED AUGUST 2008
operating characteristics at specified free-air temperature, VDD = 5 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
TA†
25°C
SR
Slew rate at unity gain
Vn
Equivalent input noise voltage
VN(PP)
VO(PP) = 1
1.5
5V
V, CL = 100 pF
pF, RL = 10 kΩ
Full range
TLV2771-Q1
MIN
TYP
5
10.5
4.7
6
MAX
UNIT
V/ s
V/µs
f = 1 kHz
25°C
17
f = 10 kHz
25°C
12
Peak-to-peak
Peak
to peak equivalent input
noise voltage
f = 0.1 Hz to 1 Hz
25°C
0.33
f = 0.1 Hz to 10 Hz
25°C
0.86
µV
In
Equivalent input noise current
f = 100 Hz
25°C
0.6
fA /√Hz
THD + N
Total
T
t l harmonic
h
i distortion
di t ti plus
l
noise
RL = 600 Ω,
Ω
f = 1 kHz
AV = 1
AV = 10
0.016%
0.095%
Gain-bandwidth product
f = 10 kHz, RL = 600 Ω, CL = 100 pF
25°C
5.1
25°C
0.134
Settling time
AV = −1,
1.5
3.5
V,
Step = 1
5 V to 3
5V
RL = 600 Ω, CL = 100 pF
0.1%
ts
0.01%
25°C
1.97
φm
Phase margin at unity gain
25°C
46°
25°C
12
†
8
RL = 600 Ω,
Ω CL = 100 pF
Full range is − 40°C to 125°C.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
µV
0.005%
25°C
25
C
AV = 100
Gain margin
nV/√Hz
MHz
µss
dB
TLV277x-Q1, TLV277xA-Q1
FAMILY OF 2.7-V HIGH-SLEW-RATE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SGLS179D− SEPTEMBER 2003 − REVISED AUGUST 2008
electrical characteristics at specified free-air temperature, VDD = 2.7 V (unless otherwise noted)
PARAMETER
VIO
Input offset voltage
αVIO
Temperature
coefficient of input
offset voltage
IIO
Input offset current
IIB
Input bias current
VICR
Common mode
Common-mode
input voltage range
TEST CONDITIONS
VDD = ± 1.35 V,
VIC = 0,
RS = 50 Ω
VO = 0,
TA†
MAX
25°C
0.44
Full range
0.47
25°C
to
125°C
2
VOH
IOH = − 0
0.675
675 mA
†
‡
Low level output
Low-level
voltage
IOL = 2.2
2 2 mA
VIC = 1.35 V,
VO = 0.6 V to 2.1 V
RL = 10 kΩ,‡
AVD
Large-signal
differential voltage
amplification
ri(d)
Differential input
resistance
ci(c)
Common-mode
input capacitance
f = 10 kHz,
zo
Closed-loop
output impedance
f = 100 kHz,
CMRR
Common mode
Common-mode
rejection ratio
kSVR
IDD
1.6
0.47
1.9
1
60
2
125
25°C
2
60
2
60
Full range
6
350
6
350
25°C
25
C
0
to
1.4
−0.3
to
1.7
0
to
1.4
−0.3
to
1.7
Full range
0
to
1.4
−0.3
to
1.7
0
to
1.4
−0.3
to
1.7
2.6
V
2.1
0.1
Full range
0.1
0.2
0.2
0.21
Full range
V
0.21
0.6
13
pA
V
2.4
2.1
Full range
pA
2.45
2.4
20
mV
2.6
2.45
25°C
UNIT
µV/°C
V/°C
2
60
25°C
VIC = 1
1.35
35 V
V,
0.44
2.7
125
25°C
VOL
2.5
2
Full range
IOL = 0.675
0 675 mA
MAX
1
25°C
VIC = 1
1.35
35 V
V,
TYP
25°C
Full range
IOH = − 2
2.2
2 mA
MIN
Full range
25°C
High level output
High-level
voltage
TLV2772A-Q1
TYP
RS = 50 Ω
CMRR > 60 dB
dB,
TLV2772-Q1
MIN
380
0.6
20
380
V/mV
13
25°C
1012
1012
Ω
25°C
8
8
pF
AV = 10
25°C
25
25
Ω
VIC = VICR (min),
RS = 50 Ω
VO = 1.5 V,
25°C
60
84
60
84
Full range
60
82
60
82
Supply voltage
rejection ratio
(∆VDD /∆VIO)
VDD = 2.7 V to 5 V,
No load
VIC = VDD /2,
25°C
70
89
70
89
Full range
70
84
70
84
Supply current
(per channel)
VO = 1.5
1 5 V,
V
No load
dB
dB
25°C
Full range
1
2
2
1
2
2
mA
Full range is −40°C to 125°C for Q level part.
Referenced to 1.35 V
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
9
TLV277x-Q1, TLV277xA-Q1
FAMILY OF 2.7-V HIGH-SLEW-RATE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SGLS179D− SEPTEMBER 2003 − REVISED AUGUST 2008
operating characteristics at specified free-air temperature, VDD = 2.7 V (unless otherwise noted)
PARAMETER
SR
Slew rate at unity gain
Vn
Equivalent input
noise voltage
VN(PP)
Peak-to-peak
equivalent input
noise voltage
In
THD + N
TEST CONDITIONS
VO(PP) = 0
0.8
8 V,
V
RL = 10 kΩ
CL = 100 pF,
pF
TA†
TYP
25°C
5
Full
range
4.7
φm
TYP
9
5
9
6
4.7
6
MAX
UNIT
V/µs
25°C
21
21
25°C
17
17
f = 0.1 Hz to 1 Hz
25°C
0.33
0.33
µV
f = 0.1 Hz to 10 Hz
25°C
0.86
0.86
µV
Equivalent input
noise current
f = 100 Hz
25°C
0.6
0.6
fA /√Hz
RL = 600 Ω,
Ω
f = 1 kHz
0.0085%
0.0085%
Total
T
t l harmonic
h
i
distortion plus noise
0.025%
0.025%
0.12%
0.12%
AV = 1
AV = 10
25°C
25
C
Gain-bandwidth
product
f = 10 kHz,
CL = 100 pF
Settling time
AV = −1,
Step = 0.85 V to
1 85 V,
V
1.85
RL = 600 Ω,
CL = 100 pF
Phase margin at
unity gain
RL = 600 Ω,
RL = 600 Ω,
25°C
4.8
4.8
0.1%
25°C
0.186
0.186
0.01%
25°C
3.92
3.92
25°C
46°
46°
25°C
12
12
nV/√Hz
MHz
µss
CL = 100 pF
Full range is −40°C to 125°C for Q level part.
10
MIN
f = 1 kHz
Gain margin
†
TLV2772A-Q1
MAX
f = 10 kHz
AV = 100
ts
TLV2772-Q1
MIN
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
dB
TLV277x-Q1, TLV277xA-Q1
FAMILY OF 2.7-V HIGH-SLEW-RATE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SGLS179D− SEPTEMBER 2003 − REVISED AUGUST 2008
electrical characteristics at specified free-air temperature, VDD = 5 V (unless otherwise noted)
PARAMETER
VIO
Input offset voltage
αVIO
Temperature
coefficient of input
offset voltage
IIO
Input offset current
IIB
Input bias current
VICR
Common mode
Common-mode
input voltage range
TEST CONDITIONS
VDD = ± 2.5 V,
VIC = 0,
0
VO = 0,
RS = 50 Ω
TA†
MAX
25°C
0.36
Full range
0.4
25°C
to
125°C
2
VOH
IOH = − 1
1.3
3 mA
†
‡
Low level output
Low-level
voltage
IOL = 4.2
4 2 mA
VIC = 2.5 V,
VO = 1 V to 4 V
RL = 10 kΩ,‡
AVD
Large-signal
differential voltage
amplification
ri(d)
Differential input
resistance
ci(c)
Common-mode
input capacitance
f = 10 kHz,
zo
Closed-loop
output impedance
f = 100 kHz,
CMRR
Common mode
Common-mode
rejection ratio
kSVR
IDD
1.6
0.4
1.9
1
60
2
125
25°C
2
60
2
60
Full range
6
350
6
350
25°C
25
C
0
to
3.7
−0.3
to
3.8
0
to
3.7
−0.3
to
3.8
Full range
0
to
3.7
−0.3
to
3.8
0
to
3.7
−0.3
to
3.8
4.9
V
4.4
0.1
Full range
0.1
0.2
0.2
0.21
Full range
V
0.21
0.6
13
pA
V
4.7
4.4
Full range
pA
4.8
4.7
20
mV
4.9
4.8
25°C
UNIT
µV/°C
V/°C
2
60
25°C
VIC = 2.5
2 5 V,
V
0.36
2.7
125
25°C
VOL
2.5
2
Full range
IOL = 1.3
1 3 mA
MAX
1
25°C
VIC = 2.5
2 5 V,
V
TYP
25°C
Full range
IOH = − 4
4.2
2 mA
MIN
Full range
25°C
High level output
High-level
voltage
TLV2772A-Q1
TYP
RS = 50 Ω
CMRR > 60 dB
dB,
TLV2772-Q1
MIN
450
0.6
20
450
V/mV
13
25°C
1012
1012
Ω
25°C
8
8
pF
AV = 10
25°C
20
20
Ω
VIC = VICR (min),
RS = 50 Ω
VO = 3.7 V,
25°C
60
96
60
96
Full range
60
93
60
93
Supply voltage
rejection ratio
(∆VDD /∆VIO)
VDD = 2.7 V to 5 V,
No load
VIC = VDD /2,
25°C
70
89
70
89
Full range
70
84
70
84
Supply current
(per channel)
VO = 1.5
1 5 V,
V
No load
dB
dB
25°C
Full range
1
2
2
1
2
2
mA
Full range is −40°C to 125°C for Q level part.
Referenced to 2.5 V
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
11
TLV277x-Q1, TLV277xA-Q1
FAMILY OF 2.7-V HIGH-SLEW-RATE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SGLS179D− SEPTEMBER 2003 − REVISED AUGUST 2008
operating characteristics at specified free-air temperature, VDD = 5 V (unless otherwise noted)
PARAMETER
SR
Slew rate at unity gain
Vn
Equivalent input
noise voltage
VN(PP)
Peak-to-peak
equivalent input
noise voltage
In
THD + N
TEST CONDITIONS
VO(PP) = 1
1.5
5 V,
V
RL = 10 kΩ
CL = 100 pF,
pF
TA†
TYP
25°C
5
Full
range
4.7
φm
TYP
10.5
5
10.5
6
4.7
6
MAX
UNIT
V/µs
25°C
17
17
25°C
12
12
f = 0.1 Hz to 1 Hz
25°C
0.33
0.33
µV
f = 0.1 Hz to 10 Hz
25°C
0.86
0.86
µV
Equivalent input
noise current
f = 100 Hz
25°C
0.6
0.6
fA /√Hz
RL = 600 Ω,
Ω
f = 1 kHz
0.005%
0.005%
Total
T
t l harmonic
h
i
distortion plus noise
0.016%
0.016%
0.095%
0.095%
AV = 1
AV = 10
25°C
25
C
Gain-bandwidth
product
f = 10 kHz,
CL = 100 pF
Settling time
AV = −1,
Step = 1.5 V to
3 5 V,
V
3.5
RL = 600 Ω,
CL = 100 pF
Phase margin at unity
gain
RL = 600 Ω,
RL = 600 Ω,
25°C
5.1
5.1
0.1%
25°C
0.134
0.134
0.01%
25°C
1.97
1.97
25°C
46°
46°
25°C
12
12
nV/√Hz
MHz
µss
CL = 100 pF
Full range is −40°C to 125°C for Q level part.
12
MIN
f = 1 kHz
Gain margin
†
TLV2772A-Q1
MAX
f = 10 kHz
AV = 100
ts
TLV2772-Q1
MIN
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
dB
TLV277x-Q1, TLV277xA-Q1
FAMILY OF 2.7-V HIGH-SLEW-RATE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SGLS179D− SEPTEMBER 2003 − REVISED AUGUST 2008
TYPICAL CHARACTERISTICS
Table of Graphs
FIGURE
VIO
Input offset voltage
Distribution
vs Common
mode input voltage
Common-mode
Distribution
IIB/IIO
Input bias and input offset currents
vs Free-air temperature
VOH
High-level output voltage
vs High-level output current
VOL
Low-level output voltage
vs Low-level output current
10, 11
VO(PP)
Maximum peak-to-peak output voltage
vs Frequency
12, 13
IOS
Short-circuit output current
vs Supply voltage
vs Free-air temperature
VO
Output voltage
vs Differential input voltage
AVD
Large-signal differential voltage amplification and phase margin
vs Frequency
17, 18
AVD
Differential voltage amplification
vs Load resistance
vs Free-air temperature
19
20, 21
zo
Output impedance
vs Frequency
22, 23
CMRR
Common-mode rejection ratio
vs Frequency
vs Free-air temperature
kSVR
Supply-voltage rejection ratio
vs Frequency
IDD
Supply current (per channel)
vs Supply voltage
28
SR
Slew rate
vs Load capacitance
vs Free-air temperature
29
30
VO
Voltage-follower small-signal pulse response
31, 32
VO
Voltage-follower large-signal pulse response
33, 34
VO
Inverting small-signal pulse response
35, 36
VO
Inverting large-signal pulse response
Vn
Equivalent input noise voltage
vs Frequency
Noise voltage (referred to input)
Over a 10-second period
Total harmonic distortion plus noise
vs Frequency
THD + N
1, 2
3 4
3,
5, 6
7
8, 9
14
15
16
24
25
26, 27
37, 38
39, 40
41
42, 43
Gain-bandwidth product
vs Supply voltage
44
B1
Unity-gain bandwidth
vs Load capacitance
45
φm
Phase margin
vs Load capacitance
46
Gain margin
vs Load capacitance
47
Amplifier with shutdown pulse turnon/off characteristics
48−50
Supply current with shutdown pulse turnon/off characteristics
51−53
Shutdown supply current
vs Free-air temperature
Shutdown forward/reverse isolation
vs Frequency
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
54
55, 56
13
TLV277x-Q1, TLV277xA-Q1
FAMILY OF 2.7-V HIGH-SLEW-RATE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SGLS179D− SEPTEMBER 2003 − REVISED AUGUST 2008
TYPICAL CHARACTERISTICS
DISTRIBUTION OF TLV2772
INPUT OFFSET VOLTAGE
DISTRIBUTION OF TLV2772
INPUT OFFSET VOLTAGE
40
40
VDD = 2.7 V
RL = 10 kΩ
TA = 25°C
35
Percentage of Amplifiers − %
Percentage of Amplifiers − %
35
30
25
20
15
10
VDD = 5 V
RL = 10 kΩ
TA = 25°C
30
25
20
15
10
5
5
0
−2.5 −2 −1.5 −1 −0.5 0
0.5
1
1.5
2
0
2.5
−2.5 −2 −1.5 −1 −0.5 0
VIO − Input Offset Voltage − mV
Figure 1
1.5
VIO − Input Offset Voltage − mV
VIO − Input Offset Voltage − mV
2
2.5
4
4.5
2
VDD = 2.7 V
TA = 25°C
1
0.5
0
−0.5
−1
VDD = 5 V
TA = 25°C
1
0.5
0
−0.5
−1
−1.5
−1.5
−0.5
0
0.5
1
1.5
2
2.5
3
VIC − Common-Mode Input Voltage − V
−2
−1 −0.5
0
0.5
1
1.5
2
Figure 4
POST OFFICE BOX 655303
2.5
3
3.5
VIC − Common-Mode Input Voltage − V
Figure 3
14
1.5
INPUT OFFSET VOLTAGE
vs
COMMON-MODE INPUT VOLTAGE
2
−2
−1
1
Figure 2
INPUT OFFSET VOLTAGE
vs
COMMON-MODE INPUT VOLTAGE
1.5
0.5
VIO − Input Offset Voltage − mV
• DALLAS, TEXAS 75265
TLV277x-Q1, TLV277xA-Q1
FAMILY OF 2.7-V HIGH-SLEW-RATE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SGLS179D− SEPTEMBER 2003 − REVISED AUGUST 2008
TYPICAL CHARACTERISTICS
DISTRIBUTION OF TLV2772
INPUT OFFSET VOLTAGE
DISTRIBUTION OF TLV2772
INPUT OFFSET VOLTAGE
35
35
VDD = 2.7 V
TA = 25°C to 125°C
25
20
15
10
5
0
VDD = 5 V
TA = 25°C to 125°C
30
Percentage of Amplifiers − %
Percentage of Amplifiers − %
30
25
20
15
10
5
−6
−3
0
3
6
9
0
12
−6
αVIO − Temperature Coefficient − µV/°C
−3
0
Figure 5
9
12
Figure 6
INPUT BIAS AND OFFSET CURRENT
vs
FREE-AIR TEMPERATURE
HIGH-LEVEL OUTPUT VOLTAGE
vs
HIGH-LEVEL OUTPUT CURRENT
0.20
3
VDD = 5 V
VIC = 0
VO = 0
RS = 50 Ω
VDD = 2.7 V
VOH − High-Level Output Voltage − V
I IB and I IO − Input Bias and Input Offset Currents − nA
6
3
αVIO − Temperature Coefficient − µV/°C
0.15
IIB
0.10
0.05
IIO
2.5
2
TA = −40°C
1.5
TA = 125°C
1
TA = 25°C
0.5
TA = 85°C
0
−75
−50
−25
0
25
50
75
100
125
TA − Free-Air Temperature − °C
0
0
5
10
15
20
25
IOH − High-Level Output Current − mA
Figure 7
Figure 8
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
15
TLV277x-Q1, TLV277xA-Q1
FAMILY OF 2.7-V HIGH-SLEW-RATE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SGLS179D− SEPTEMBER 2003 − REVISED AUGUST 2008
TYPICAL CHARACTERISTICS
HIGH-LEVEL OUTPUT VOLTAGE
vs
HIGH-LEVEL OUTPUT CURRENT
LOW-LEVEL OUTPUT VOLTAGE
vs
LOW-LEVEL OUTPUT CURRENT
5
3
VDD = 5 V
TA = 25°C
4
VDD = 2.7 V
VOL − Low-Level Output Voltage − V
VOH − High-Level Output Voltage − V
4.5
TA = −40°C
3.5
TA = 25°C
3
2.5
TA = 125°C
2
1.5
TA = 85°C
1
0.5
0
0
5
10
15
20 25
30
35 40 45
50
2.5
TA = 125°C
1.5
TA = 25°C
1
TA = −40°C
0.5
0
55
TA = 85°C
2
0
5
IOH − High-Level Output Current − mA
Figure 9
TA = 85°C
2
1.5
TA = 25°C
1
TA = −40°C
0.5
0
20
30
40
50
VO(PP) − Maximum Peak-to-Peak Output Voltage − V
VOL − Low-Level Output Voltage − V
TA = 125°C
2.5
10
25
30
5
RL = 10 kΩ
VDD = 5 V
1% THD
4
3
2
VDD = 2.7 V
2% THD
1
0
100
IOL − Low-Level Output Current − mA
1000
f − Frequency − kHz
Figure 11
16
20
MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE
vs
FREQUENCY
3
0
15
Figure 10
LOW-LEVEL OUTPUT VOLTAGE
vs
LOW-LEVEL OUTPUT CURRENT
VDD = 5 V
10
IOL − Low-Level Output Current − mA
Figure 12
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
10000
TLV277x-Q1, TLV277xA-Q1
FAMILY OF 2.7-V HIGH-SLEW-RATE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SGLS179D− SEPTEMBER 2003 − REVISED AUGUST 2008
TYPICAL CHARACTERISTICS
SHORT-CIRCUIT OUTPUT CURRENT
vs
SUPPLY VOLTAGE
5
60
THD = 5%
RL = 600 Ω
TA = 25°C
4.5
I OS − Short-Circuit Output Current − mA
VO(PP) − Maximum Peak-to-Peak Output Voltage − V
MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE
vs
FREQUENCY
4
3.5
VDD = 5 V
3
2.5
VDD = 2.7 V
2
1.5
1
0.5
0
100
1000
45
VO = VDD /2
VIC = VDD /2
TA = 25°C
30
15
0
−15
−30
VID = 100 mV
−45
−60
2
10000
VID = −100 mV
RL = 600 Ω
TA = 25°C
VDD = 5 V
4
VO − Output Voltage − V
I OS − Short-Circuit Output Current − mA
5
20
VDD = 5 V
VO = 2.5 V
0
−20
VID = 100 mV
−25
7
OUTPUT VOLTAGE
vs
DIFFERENTIAL INPUT VOLTAGE
60
−50
6
Figure 14
SHORT-CIRCUIT OUTPUT CURRENT
vs
FREE-AIR TEMPERATURE
−60
−75
5
VDD − Supply Voltage − V
Figure 13
−40
4
3
f − Frequency − kHz
40
VID = −100 mV
3
VDD = 2.7 V
2
1
0
25
50
75
100
125
TA − Free-Air Temperature − °C
0
−1000 −750 −500 −250
0
250
500
750
1000
VID − Differential Input Voltage − µV
Figure 15
Figure 16
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
17
TLV277x-Q1, TLV277xA-Q1
FAMILY OF 2.7-V HIGH-SLEW-RATE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SGLS179D− SEPTEMBER 2003 − REVISED AUGUST 2008
TYPICAL CHARACTERISTICS
LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION
AND PHASE MARGIN
vs
FREQUENCY
VDD = 2.7 V
RL = 600 Ω
CL = 600 pF
TA = 25°C
80
AVD
300
240
60
180
40
120
Phase
20
60
0
0
−20
−40
100
φ m − Phase Margin − degrees
A VD − Large-Signal Differential Amplification − dB
100
−60
1k
10k
100k
1M
−90
10M
f − Frequency − Hz
Figure 17
LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION
AND PHASE MARGIN
vs
FREQUENCY
VDD = 5 V
RL = 600 Ω
CL = 600 pF
TA = 25°C
80
AVD
240
60
180
40
120
Phase
20
60
0
0
−20
−40
100
−60
1k
10k
100k
1M
f − Frequency − Hz
Figure 18
18
300
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
−90
10M
φ m − Phase Margin − degrees
A VD − Large-Signal Differential Amplification − dB
100
TLV277x-Q1, TLV277xA-Q1
FAMILY OF 2.7-V HIGH-SLEW-RATE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SGLS179D− SEPTEMBER 2003 − REVISED AUGUST 2008
TYPICAL CHARACTERISTICS
DIFFERENTIAL VOLTAGE AMPLIFICATION
vs
LOAD RESISTANCE
DIFFERENTIAL VOLTAGE AMPLIFICATION
vs
FREE-AIR TEMPERATURE
1000
TA = 25°C
A VD − Differential Voltage Amplification − V/mV
A VD − Differential Voltage Amplification − V/mV
250
200
VDD = 2.7 V
VDD = 5 V
150
100
50
0
0.1
1
100
10
1000
RL = 10 kΩ
RL = 1 MΩ
100
RL = 600 Ω
10
1
VDD = 2.7 V
VIC = 1.35 V
VO = 0.6 V to 2.1 V
0.1
−75
−50
RL − Load Resistance − kΩ
−25
0
75
100
125
Figure 20
DIFFERENTIAL VOLTAGE AMPLIFICATION
vs
FREE-AIR TEMPERATURE
OUTPUT IMPEDANCE
vs
FREQUENCY
1000
100
RL = 10 kΩ
VDD = 2.7 V
TA = 25°C
RL = 1 MΩ
ZO − Output Impedance − Ω
A VD − Differential Voltage Amplification − V/mV
50
TA − Free-Air Temperature − °C
Figure 19
100
25
RL = 600 Ω
10
1
10
AV = 100
1
AV = 10
0.10
AV = 1
VDD = 5 V
VIC = 2.5 V
VO = 1 V to 4 V
0.1
−75
−50
−25
0
25
50
75
100
125
0.01
100
TA − Free-Air Temperature − °C
1k
10k
100k
1M
f − Frequency − Hz
Figure 21
Figure 22
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
19
TLV277x-Q1, TLV277xA-Q1
FAMILY OF 2.7-V HIGH-SLEW-RATE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SGLS179D− SEPTEMBER 2003 − REVISED AUGUST 2008
TYPICAL CHARACTERISTICS
OUTPUT IMPEDANCE
vs
FREQUENCY
COMMON-MODE REJECTION RATIO
vs
FREQUENCY
100
90
CMRR − Common-Mode Rejection Ratio − dB
Zo − Output Impedance − Ω
VDD = ±2.5 V
TA = 25°C
10
Av = 100
1
Av = 10
0.1
Av = 1
0.01
100
1k
10k
100k
VDD = 5 V
80
70
60
50
40
10
1M
100
f − Frequency − Hz
1M
10M
120
k SVR − Supply-Voltage Rejection Ratio − dB
CMRR − Common-Mode Rejection Ratio − dB
100k
SUPPLY-VOLTAGE REJECTION RATIO
vs
FREQUENCY
120
115
110
105
VDD = 2.7 V
95
90
VDD = 5 V
85
0
20
40
60
80
100 120 140
VDD = 2.7 V
TA = 25°C
kSVR+
100
kSVR−
80
60
40
20
0
10
TA − Free-Air Temperature − °C
100
1k
10k
Figure 26
POST OFFICE BOX 655303
100k
f − Frequency − Hz
Figure 25
20
10k
Figure 24
COMMON-MODE REJECTION RATIO
vs
FREE-AIR TEMPERATURE
80
−40 −20
1k
f − Frequency − Hz
Figure 23
100
VIC = 1.35 V
and 2.5 V
TA = 25°C
VDD = 2.7 V
• DALLAS, TEXAS 75265
1M
10M
TLV277x-Q1, TLV277xA-Q1
FAMILY OF 2.7-V HIGH-SLEW-RATE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SGLS179D− SEPTEMBER 2003 − REVISED AUGUST 2008
TYPICAL CHARACTERISTICS
SUPPLY VOLTAGE REJECTION RATIO
vs
FREQUENCY
SUPPLY CURRENT (PER CHANNEL)
vs
SUPPLY VOLTAGE
100
1.6
VDD = 5 V
TA = 25°C
kSVR+
I DD − Supply Current (Per Channel) − mA
k SVR − Supply Voltage Rejection Ratio − dB
120
kSVR−
80
60
40
20
0
10
100
1k
10 k
100 k
1M
TA = 125°C
1.4
1.2
TA = 25°C
1
TA = 0°C
TA = − 40°C
0.8
0.6
0.4
0.2
0
2.5
10 M
TA = 85°C
3
f − Frequency − Hz
3.5
Figure 27
5
5.5
6
6.5
7
Figure 28
SLEW RATE
vs
LOAD CAPACITANCE
SLEW RATE
vs
FREE-AIR TEMPERATURE
16
14
VDD = 5 V
AV = −1
TA = 25°C
SR+
14
13
SR−
12
SR − Slew Rate − µs
SR − Slew Rate − V/ µs
4.5
4
VDD − Supply Voltage − V
10
8
6
VDD = 2.7 V
RL = 10 kΩ
CL = 100 pF
AV = 1
12
11
10
4
9
2
0
10
100
1k
10k
100k
8
−75
−50
CL − Load Capacitance − pF
−25
0
25
50
75
100
125
TA − Free-Air Temperature − °C
Figure 29
Figure 30
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
21
TLV277x-Q1, TLV277xA-Q1
FAMILY OF 2.7-V HIGH-SLEW-RATE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SGLS179D− SEPTEMBER 2003 − REVISED AUGUST 2008
TYPICAL CHARACTERISTICS
VOLTAGE-FOLLOWER
SMALL-SIGNAL PULSE RESPONSE
VOLTAGE-FOLLOWER
SMALL-SIGNAL PULSE RESPONSE
100
60
VDD = 5 V
RL = 600 Ω
CL = 100 pF
AV = 1
TA = 25°C
80
VO − Output Voltage − mV
80
VO − Output Voltage − mV
100
VDD = 2.7 V
RL = 600 Ω
CL = 100 pF
AV = 1
TA = 25°C
40
20
0
−20
−40
60
40
20
0
−20
−40
−60
0
0.5
1
1.5
2
2.5
3 3.5
4
4.5
−60
5
0
0.5
1
1.5
t − Time − µs
VOLTAGE-FOLLOWER
LARGE-SIGNAL PULSE RESPONSE
4
4.5
5
VDD = 5 V
RL = 600 Ω
CL = 100 pF
AV = 1
TA = 25°C
5
VO − Output Voltage − V
VO − Output Voltage − V
3.5
6
VDD = 2.7 V
RL = 600 Ω
CL = 100 pF
AV = 1
TA = 25°C
1.5
1
0.5
0
−0.5
4
3
2
1
0
−1
−1
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
−2
0
0.5
t − Time − µs
1
1.5
2
2.5
3
t − Time − µs
Figure 34
Figure 33
22
3
VOLTAGE-FOLLOWER
LARGE-SIGNAL PULSE RESPONSE
3
2
2.5
Figure 32
Figure 31
2.5
2
t − Time − µs
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
3.5
4
4.5
5
TLV277x-Q1, TLV277xA-Q1
FAMILY OF 2.7-V HIGH-SLEW-RATE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SGLS179D− SEPTEMBER 2003 − REVISED AUGUST 2008
TYPICAL CHARACTERISTICS
INVERTING SMALL-SIGNAL
PULSE RESPONSE
INVERTING SMALL-SIGNAL
PULSE RESPONSE
100
60
VDD = 5 V
RL = 600 Ω
CL = 100 pF
AV = −1
TA = 25°C
80
VO − Output Voltage − mV
80
VO − Output Voltage − mV
100
VDD = 2.7 V
RL = 600 Ω
CL = 100 pF
AV = −1
TA = 25°C
40
20
0
−20
−40
60
40
20
0
−20
−40
−60
0
0.5
1
1.5
2
2.5
3 3.5
4
4.5
−60
5
0
0.5
1
1.5
t − Time − µs
3
4
2.5
3.5
2
3
1.5
1
0.5
VDD = 2.7 V
RL = 600 Ω
CL = 100 pF
AV = −1
TA = 25°C
0.5
1
1.5
2
2.5
4.5
5
2.5
2
1.5
VDD = 5 V
RL = 600 Ω
CL = 100 pF
AV = −1
TA = 25°C
1
0.5
−1
0
4
INVERTING LARGE-SIGNAL
PULSE RESPONSE
VO − Output Voltage − V
VO − Output Voltage − V
INVERTING LARGE-SIGNAL
PULSE RESPONSE
−0.5
3.5
Figure 36
Figure 35
0
2
2.5
3
t − Time − µs
3
3.5
4
4.5
5
1
0
0.5
t − Time − µs
1
1.5
2 2.5
3
t − Time − µs
3.5
4
4.5
5
Figure 38
Figure 37
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
23
TLV277x-Q1, TLV277xA-Q1
FAMILY OF 2.7-V HIGH-SLEW-RATE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SGLS179D− SEPTEMBER 2003 − REVISED AUGUST 2008
TYPICAL CHARACTERISTICS
EQUIVALENT INPUT NOISE VOLTAGE
vs
FREQUENCY
EQUIVALENT INPUT NOISE VOLTAGE
vs
FREQUENCY
160
140
Vn − Input Noise Voltage − nV/ Hz
140
Vn − Input Noise Voltage − nV Hz
VDD = 2.7 V
RS = 20 Ω
TA = 25°C
120
100
80
60
40
VDD = 5 V
RS = 20 Ω
TA = 25°C
120
100
80
60
40
20
20
0
10
1k
100
0
10k
10
100
f − Frequency − Hz
Figure 39
Figure 40
NOISE VOLTAGE
OVER A 10 SECOND PERIOD
VDD = 5 V
f = 0.1 Hz to 10 Hz
TA = 25°C
300
Noise Voltage − nV
200
100
GND
−100
−200
−300
0
1
2
3
4
5
6
7
8
t − Time − s
Figure 41
24
1k
f − Frequency − Hz
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
9
10
10k
TLV277x-Q1, TLV277xA-Q1
FAMILY OF 2.7-V HIGH-SLEW-RATE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SGLS179D− SEPTEMBER 2003 − REVISED AUGUST 2008
TYPICAL CHARACTERISTICS
TOTAL HARMONIC DISTORTION PLUS NOISE
vs
FREQUENCY
10
VDD = 2.7 V
RL = 600 Ω
TA = 25°C
1
Av = 100
0.1
Av = 10
0.01
Av = 1
0.001
10
10
THD+N − Total Harmonic Distortion Plus Noise − %
THD+N − Total Harmonic Distortion Plus Noise − %
TOTAL HARMONIC DISTORTION PLUS NOISE
vs
FREQUENCY
100
1k
10k
VDD = 5 V
RL = 600 Ω
TA = 25°C
1
0.1
Av = 100
Av = 10
0.01
Av = 1
0.001
10
100k
100
f − Frequency − Hz
Figure 42
5
VDD = 5 V
RL = 600 Ω
TA = 25°C
Unity-Gain Bandwidth − MHz
Gain-Bandwidth Product − MHz
100k
UNITY-GAIN BANDWIDTH
vs
LOAD CAPACITANCE
RL = 600 Ω
CL = 100 pF
f = 10 kHz
TA = 25°C
5
10k
Figure 43
GAIN-BANDWIDTH PRODUCT
vs
SUPPLY VOLTAGE
5.2
1k
f − Frequency − Hz
4.8
4.6
4.4
4.2
4
3
Rnull = 100
2
Rnull = 50
Rnull = 20
1
Rnull = 0
4
2
2.5
3
3.5
4
4.5
5
5.5
6
0
10
VDD − Supply Voltage − V
100
1k
10k
100k
CL − Load Capacitance − pF
Figure 44
Figure 45
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
25
TLV277x-Q1, TLV277xA-Q1
FAMILY OF 2.7-V HIGH-SLEW-RATE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SGLS179D− SEPTEMBER 2003 − REVISED AUGUST 2008
TYPICAL CHARACTERISTICS
PHASE MARGIN
vs
LOAD CAPACITANCE
GAIN MARGIN
vs
LOAD CAPACITANCE
90
70
10
Rnull = 50 Ω
60
50
Rnull = 20 Ω
40
30
20
Rnull = 0
25
Rnull = 50 Ω
10k
40
10
100K
10k
CL − Load Capacitance − pF
Figure 46
Figure 47
TLV2770
TLV2773
AMPLIFIER WITH SHUTDOWN PULSE
TURNON/OFF CHARACTERISTICS
AMPLIFIER WITH SHUTDOWN PULSE
TURNON/OFF CHARACTERISTICS
8
7
6
6
4
5
0
SHDN = GND
4
VDD = 5 V
AV = 5
TA = 25°C
3
2
−6
1
−8
100K
8
7
SHDN = VDD
6
2
VDD = 5 V
SHDN = GND
AV = 5
TA = 25°C
Channel 1 Switched
Channel 2 SHDN MODE
0
−2
4
3
2
Channel 1
−4
5
1
−6
VO
VO
0
−10
−2
Shutdown Signal − V
8
VO − Output Voltage − V
SHDN = VDD
2
0
2
4
6
8
10
12
−1
14
0
−8
−10
−2.5
0
t − Time − µs
2.5
5
7.5
t − Time − µs
Figure 48
26
1k
100
CL − Load Capacitance − pF
Figure 49
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
10
12.5
−1
15
VO − Output Voltage − V
1k
100
4
Shutdown Signal − V
Rnull = 100 Ω
Rnull = 20 Ω
6
−12
−4
20
35
0
10
−4
Rnull = 0
15
30
10
−2
VDD = 5 V
RL = 600 Ω
TA = 25°C
5
Rnull = 100 Ω
Gain Margin − dB
φ m − Phase Margin − degrees
80
0
VDD = 5 V
RL = 600 Ω
TA = 25°C
TLV277x-Q1, TLV277xA-Q1
FAMILY OF 2.7-V HIGH-SLEW-RATE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SGLS179D− SEPTEMBER 2003 − REVISED AUGUST 2008
TYPICAL CHARACTERISTICS
TLV2775 − CHANNEL 1
TLV2770
AMPLIFIER WITH SHUTDOWN PULSE
TURNON/OFF CHARACTERISTICS
SUPPLY CURRENT WITH SHUTDOWN PULSE
TURNON/OFF CHARACTERISTICS
2
VDD = 5 V
SHDN = GND
AV = 5
TA = 25°C
Channel 1/2 Switched
Channel 3/4 SHDN MODE
0
−2
−10
−2.5
2
5
0
4
3
1
−6
−8
6
2
Channel 1
−4
4
VO
2.5
5
7.5
10
12.5
18
15
SHDN = GND
12
−2
VDD = 5 V
AV = 5
TA = 25°C
−4
6
−8
3
0
−10
−1
15
−12
−4
−2
0
2
4
8
6
10
12
Figure 51
TLV2773
TLV2775
SUPPLY CURRENT WITH SHUTDOWN PULSE
TURNON/OFF CHARACTERISTICS
SUPPLY CURRENT WITH SHUTDOWN PULSE
TURNON/OFF CHARACTERISTICS
0
6
60
3
50
0
SHDN = GND
40
−3
VDD = 5 V
AV = 5
TA = 25°C
Channel 1 Switched
Channel 2 SHDN MODE
−9
30
20
10
−12
IDD
0
−15
−18
−5
−2.5
0
2.5
5
7.5
10
12.5
−3
15
70
SHDN = VDD
60
50
SHDN = GND
Shutdown Signal − V
SHDN = VDD
70
I DD − Supply Current − mA
6
−6
−3
14
t − Time − µs
Figure 50
3
9
−6
t − Time − µs
Shutdown Signal − V
21
IDD
0
0
SHDN = VDD
40
−3
VDD = 5 V
AV = 5
TA = 25°C
Channel 1/2 Switched
Channel 3/4 SHDN MODE
−6
−9
30
20
10
−12
IDD
−15
−18
−5
I DD − Supply Current − mA
Shutdown Signal − V
4
7
24
I DD − Supply Current − mA
SHDN = VDD
6
Shutdown Signal − V
6
8
VO − Output Voltage − V
8
0
−2.5
t − Time − µs
0
2.5
5
7.5
10
12.5
−3
15
t − Time − µs
Figure 52
Figure 53
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
27
TLV277x-Q1, TLV277xA-Q1
FAMILY OF 2.7-V HIGH-SLEW-RATE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SGLS179D− SEPTEMBER 2003 − REVISED AUGUST 2008
TYPICAL CHARACTERISTICS
SHUTDOWN SUPPLY CURRENT
vs
FREE-AIR TEMPERATURE
TLV2770
6
140
AV = 5
RL = OPEN
SHDN = GND
5
4
VDD 5 V
3
2
VDD 2.7 V
1
100
−50
−25
0
25
50
75
100
125
VI(PP) = 0.1 V
80
60
40
20
0
0
−75
VI(PP) = 2.7 V
120
Shutdown Forward Isolation − dB
I DD − Shutdown Supply Current − µ A
7
SHUTDOWN FORWARD ISOLATION
vs
FREQUENCY
SHDN MODE
AV = 1
VDD = 2.7 V
RL = 10 kΩ
CL = 20 pF
TA = 25°C
−20
10
TA − Free-Air Temperature − °C
102
Figure 54
103
104
f − Frequency − Hz
Figure 55
TLV2770
140
SHUTDOWN REVERSE ISOLATION
vs
FREQUENCY
VI(PP) = 2.7 V
Shutdown Reverse Isolation − dB
120
100
80
60
40
20
0
−20
10
VI(PP) = 0.1 V
SHDN MODE
AV = 1
VDD = 2.7 V
RL = 10 kΩ
CL = 20 pF
TA = 25°C
102
103
104
f − Frequency − Hz
105
Figure 56
28
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
106
105
106
TLV277x-Q1, TLV277xA-Q1
FAMILY OF 2.7-V HIGH-SLEW-RATE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SGLS179D− SEPTEMBER 2003 − REVISED AUGUST 2008
PARAMETER MEASUREMENT INFORMATION
_
Rnull
+
RL
CL
Figure 57
driving a capacitive load
When the amplifier is configured in this manner, capacitive loading directly on the output decreases the device’s
phase margin leading to high frequency ringing or oscillations. Therefore, for capacitive loads of greater than
10 pF, it is recommended that a resistor be placed in series (RNULL) with the output of the amplifier, as shown
in Figure 58. A minimum value of 20 Ω should work well for most applications.
RF
RG
Input
_
RNULL
Output
+
CLOAD
Figure 58. Driving a Capacitive Load
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
29
TLV277x-Q1, TLV277xA-Q1
FAMILY OF 2.7-V HIGH-SLEW-RATE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SGLS179D− SEPTEMBER 2003 − REVISED AUGUST 2008
APPLICATION INFORMATION
offset voltage
The output offset voltage, (VOO) is the sum of the input offset voltage (VIO) and both input bias currents (IIB) times
the corresponding gains. The following schematic and formula can be used to calculate the output offset
voltage:
RF
IIB−
RG
V
+
−
VI
+V
IO
ǒ ǒ ǓǓ
1)
R
R
F
"I
G
IB)
R
S
ǒ ǒ ǓǓ
1)
R
R
F
G
"I
IB–
R
F
VO
+
RS
OO
IIB+
Figure 59. Output Offset Voltage Model
general configurations
When receiving low-level signals, limiting the bandwidth of the incoming signals into the system is often
required. The simplest way to accomplish this is to place an RC filter at the noninverting terminal of the amplifier
(see Figure 60).
RG
RF
f
–3dB
−
VO
+
VI
R1
C1
V
O +
V
I
1
2pR1C1
+
ǒ
1)
R
R
F
G
Ǔǒ
Ǔ
1
1 ) sR1C1
Figure 60. Single-Pole Low-Pass Filter
If even more attenuation is needed, a multiple pole filter is required. The Sallen-Key filter can be used for this
task. For best results, the amplifier should have a bandwidth that is 8 to 10 times the filter frequency bandwidth.
Failure to do this can result in phase shift of the amplifier.
C1
+
_
VI
R1
R1 = R2 = R
C1 = C2 = C
Q = Peaking Factor
(Butterworth Q = 0.707)
R2
f
C2
RG
RF
–3dB
RG =
+
(
RF
1
2−
Q
Figure 61. 2-Pole Low-Pass Sallen-Key Filter
30
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
2pRC
)
TLV277x-Q1, TLV277xA-Q1
FAMILY OF 2.7-V HIGH-SLEW-RATE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SGLS179D− SEPTEMBER 2003 − REVISED AUGUST 2008
APPLICATION INFORMATION
using the TLV2772 as an accelerometer interface
The schematic, shown in Figure 62, shows the ACH04-08-05 interfaced to the TLV1544 10-bit analog-to-digital
converter (ADC).
The ACH04-08-05 is a shock sensor designed to convert mechanical acceleration into electrical signals. The
sensor contains three piezoelectric sensing elements oriented to simultaneously measure acceleration in three
orthogonal, linear axes (x, y, z). The operating frequency is 0.5 Hz to 5 kHz. The output is buffered with an
internal JFET and has a typical output voltage of 1.80 mV/g for the x and y axis and 1.35 mV/g for the z axis.
Amplification and frequency shaping of the shock sensor output is done by the TLV2772 rail-to-rail operational
amplifier. The TLV2772 is ideal for this application as it offers high input impedance, good slew rate, and
excellent dc precision. The rail-to-rail output swing and high output drive are perfect for driving the analog input
of the TLV1544 ADC.
1.23 V
C2
2.2 nF
R3
10 kΩ
R4
100 kΩ
3V
R2
1 MΩ
1 Axis ACH04−08−05
3V
C1
0.22 µF
R1
100 kΩ
R5
1 kΩ
8
2
+
3 _
1
4
Output to
TLV1544 (ADC)
1/2
TLV2772
C3
0.22 µF
Signal Conditioning
3V
R6
2.2 kΩ
1.23 V
Shock Sensor
1.23 V
C
R
TLV431
A
Voltage Reference
Figure 62. Accelerometer Interface Schematic
The sensor signal must be amplified and frequency-shaped to provide a signal the ADC can properly convert
into the digital domain. Figure 62 shows the topology used in this application for one axis of the sensor. This
system is powered from a single 3-V supply. Configuring the TLV431 with a 2.2-kΩ resistor produces a reference
voltage of 1.23 V. This voltage is used to bias the operational amplifier and the internal JFETs in the shock
sensor.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
31
TLV277x-Q1, TLV277xA-Q1
FAMILY OF 2.7-V HIGH-SLEW-RATE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SGLS179D− SEPTEMBER 2003 − REVISED AUGUST 2008
APPLICATION INFORMATION
gain calculation
Since the TLV2772 is capable of rail-to-rail output using a 3-V supply, VO = 0 (min) to 3 V (max). With no signal
from the sensor, nominal VO = reference voltage = 1.23 V. Therefore, the maximum negative swing from nominal
is 0 V − 1.23 V = −1.23 V and the maximum positive swing is 3 V − 1.23 V = 1.77 V. By modeling the shock sensor
as a low impedance voltage source with output of 2.25 mV/g (max) in the x and y axis and 1.7 mV/g (max) in
the z axis, the gain of the circuit is calculated by equation 1.
Gain +
Output Swing
Sensor Signal Acceleration
(1)
To avoid saturation of the operational amplifier, the gain calculations are based on the maximum negative swing
of −1.23 V and the maximum sensor output of 2.25 mV/g (x and y axis) and 1.70 mV/g (z axis).
Gain (x, y) +
* 1.23 V
+ 10.9
2.25 mVńg * 50 g
(2)
and
Gain (z) +
–1.23 V
+ 14.5
1.70 mVńg –50 g
(3)
By selecting R3 = 10 kΩ and R4 = 100 kΩ, in the x and y channels, a gain of 11 is realized. By selecting
R3 = 7.5 kΩ and R4 = 100 kΩ, in the z channel, a gain of 14.3 is realized. The schematic shows the configuration
for either the x- or y-axis.
bandwidth calculation
To calculate the component values for the frequency shaping characteristics of the signal conditioning circuit,
1 Hz and 500 Hz are selected as the minimum required 3-dB bandwidth.
To minimize the value of the input capacitor (C1) required to set the lower cutoff frequency requires a large value
resistor for R2 is required. A 1-MΩ resistor is used in this example. To set the lower cutoff frequency, the required
capacitor value for C1 is:
C1 +
1
+ 0.159 µF
2p f LOW R 2
(4)
Using a value of 0.22 µF, a more common value of capacitor, the lower cutoff frequency is 0.724 Hz.
To minimize the phase shift in the feedback loop caused by the input capacitance of the TLV2772, it is best to
minimize the value of the feedback resistor R4. However, to reduce the required capacitance in the feedback
loop a large value for R4 is required. Therefore, a compromise for the value of R4 must be made. In this circuit,
a value of 100 kΩ has been selected. To set the upper cutoff frequency, the required capacitor value for C2 is:
C2 +
1
+ 3.18 µF
2p f HIGH R 4
(5)
Using a 2.2-nF capacitor, the upper cutoff frequency is 724 Hz.
R5 and C3 also cause the signal response to roll off. Therefore, it is beneficial to design this roll-off point to begin
at the upper cutoff frequency. Assuming a value of 1 kΩ for R5, the value for C3 is calculated to be
0.22 µF.
32
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLV277x-Q1, TLV277xA-Q1
FAMILY OF 2.7-V HIGH-SLEW-RATE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SGLS179D− SEPTEMBER 2003 − REVISED AUGUST 2008
APPLICATION INFORMATION
circuit layout considerations
To achieve the levels of high performance of the TLV277x, follow proper printed-circuit board design techniques.
A general set of guidelines is given in the following.
D Ground planes—It is highly recommended that a ground plane be used on the board to provide all
components with a low inductive ground connection. However, in the areas of the amplifier inputs and
output, the ground plane can be removed to minimize the stray capacitance.
D Proper power supply decoupling—Use a 6.8-µF tantalum capacitor in parallel with a 0.1-µF ceramic
capacitor on each supply terminal. It may be possible to share the tantalum among several amplifiers
depending on the application, but a 0.1-µF ceramic capacitor should always be used on the supply terminal
of every amplifier. In addition, the 0.1-µF capacitor should be placed as close as possible to the supply
terminal. As this distance increases, the inductance in the connecting trace makes the capacitor less
effective. The designer should strive for distances of less than 0.1 inches between the device power
terminals and the ceramic capacitors.
D Sockets—Sockets can be used but are not recommended. The additional lead inductance in the socket pins
will often lead to stability problems. Surface-mount packages soldered directly to the printed-circuit board
is the best implementation.
D Short trace runs/compact part placements—Optimum high performance is achieved when stray series
inductance has been minimized. To realize this, the circuit layout should be made as compact as possible,
thereby minimizing the length of all trace runs. Particular attention should be paid to the inverting input of
the amplifier. Its length should be kept as short as possible. This helps to minimize stray capacitance at the
input of the amplifier.
D Surface-mount passive components—Using surface-mount passive components is recommended for high
performance amplifier circuits for several reasons. First, because of the extremely low lead inductance of
surface-mount components, the problem with stray series inductance is greatly reduced. Second, the small
size of surface-mount components naturally leads to a more compact layout thereby minimizing both stray
inductance and capacitance. If leaded components are used, it is recommended that the lead lengths be
kept as short as possible.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
33
TLV277x-Q1, TLV277xA-Q1
FAMILY OF 2.7-V HIGH-SLEW-RATE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SGLS179D− SEPTEMBER 2003 − REVISED AUGUST 2008
APPLICATION INFORMATION
general power dissipation considerations
For a given θJA, the maximum power dissipation is shown in Figure 63 and is calculated by the following formula:
P
D
+
Where:
PD
TMAX
TA
θJA
ǒ
T
Ǔ
–T
MAX A
q
JA
= Maximum power dissipation of TLV277x IC (watts)
= Absolute maximum junction temperature (150°C)
= Free-ambient air temperature (°C)
= θJC + θCA
θJC = Thermal coefficient from junction-to-case
θCA = Thermal coefficient from case to ambient air (°C/W)
MAXIMUM POWER DISSIPATION
vs
FREE-AIR TEMPERATURE
2
Maximum Power Dissipation − W
1.75
1.5
1.25
TJ = 150°C
PDIP Package
Low-K Test PCB
θJA = 104°C/W
MSOP Package
Low-K Test PCB
θJA = 260°C/W
SOIC Package
Low-K Test PCB
θJA = 176°C/W
1
0.75
0.5
0.25
SOT-23 Package
Low-K Test PCB
θJA = 324°C/W
0
−55 −40 −25 −10 5 20 35 50 65 80 95 110 125
TA − Free-Air Temperature − °C
NOTE A: Results are with no air flow and using JEDEC Standard Low-K test PCB.
Figure 63.
34
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLV277x-Q1, TLV277xA-Q1
FAMILY OF 2.7-V HIGH-SLEW-RATE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SGLS179D− SEPTEMBER 2003 − REVISED AUGUST 2008
APPLICATION INFORMATION
shutdown function
Three members of the TLV277x family (TLV2770/3/5) have a shutdown terminal for conserving battery life in
portable applications. When the shutdown terminal is tied low, the supply current is reduced to 0.8 µA/channel,
the amplifier is disabled, and the outputs are placed in a high impedance mode. To enable the amplifier, the
shutdown terminal can either be left floating or pulled high. When the shutdown terminal is left floating, care
needs to be taken to ensure that parasitic leakage current at the shutdown terminal does not inadvertently place
the operational amplifier into shutdown. The shutdown terminal threshold is always referenced to VDD/2.
Therefore, when operating the device with split supply voltages (e.g. ± 2.5 V), the shutdown terminal needs to
be pulled to VDD− (not GND) to disable the operational amplifier.
The amplifier’s output with a shutdown pulse is shown in Figure 48 through Figure 50. The amplifier is powered
with a single 5-V supply and configured as a noninverting configuration with a gain of 5. The amplifier turnon
and turnoff times are measured from the 50% point of the shutdown pulse to the 50% point of the output
waveform. The times for the single, dual, and quad are listed in the data tables. The bump on the rising edge
of the TLV2770 output waveform is due to the start-up circuit on the bias generator. For the dual and quad
(TLV2773/5), this bump is attributed to the bias generator’s start-up circuit as well as the crosstalk between the
other channel(s), which are in shutdown.
Figure 55 and Figure 56 show the amplifier’s forward and reverse isolation in shutdown. The operational
amplifier is powered by ±1.35-V supplies and configured as a voltage follower (AV = 1). The isolation
performance is plotted across frequency for both 0.1-VPP and 2.7-VPP input signals. During normal operation,
the amplifier would not be able to handle a 2.7-VPP input signal with a supply voltage of ±1.35 V since it exceeds
the common-mode input voltage range (VICR). However, this curve illustrates that the amplifier remains in
shutdown even under a worst case scenario.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
35
TLV277x-Q1, TLV277xA-Q1
FAMILY OF 2.7-V HIGH-SLEW-RATE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SGLS179D− SEPTEMBER 2003 − REVISED AUGUST 2008
APPLICATION INFORMATION
macromodel information
Macromodel information provided was derived using Microsim Parts Release 8, the model generation
software used with Microsim PSpice . The Boyle macromodel (see Note 4) and subcircuit in Figure 64 are
generated using the TLV2772 typical electrical and operating characteristics at TA = 25°C. Using this
information, output simulations of the following key parameters can be generated to a tolerance of 20% (in most
cases):
D Maximum positive output voltage swing
D Unity-gain frequency
D Maximum negative output voltage swing
D Common-mode rejection ratio
D Slew rate
D Phase margin
D Quiescent power dissipation
D DC output resistance
D Input bias current
D AC output resistance
D Open-loop voltage amplification
D Short-circuit output current limit
NOTE 6: G. R. Boyle, B. M. Cohn, D. O. Pederson, and J. E. Solomon, “Macromodeling of Integrated Circuit Operational Amplifiers”, IEEE Journal
of Solid-State Circuits, SC-9, 353 (1974).
99
3
VDD +
css
egnd
9
rss
2
IN −
j1
dp
vc
j2
IN+
11
C2
6
GND
−
−
+
vln
+
gcm
vlim
ga
8
−
ro1
rd2
54
4
−
de
5
+
ve
* TLV2772 operational amplifier macromodel subcircuit
* created using Parts release 8.0 on 12/12/97 at 10:08
* Parts is a MicroSim product.
*
* connections: noninverting input
*
| inverting input
*
| | positive power supply
*
| | | negative power supply
*
| | | | output
*
| | | | |
.subckt TLV2772
12345
*
c1
11
12
2.8868E-12
c2
6
7
10.000E−12
css
10
99
2.6302E−12
dc
5
53
dy
de
54
5
dy
dlp
90
91
dx
dln
92
90
dx
dp
4
3
dx
egnd
99
0
poly(2) (3,0) (4,0) 0 .5 .5
fb
7
99
poly(5) vb vc ve vlp vln 0
15.513E6 −1E3 1E3 16E6 −16E6
ga
6
0
11 12 188.50E−6
gcm
0
6
10 99 9.4472E−9
iss
hlim
j1
j2
r2
rd1
rd2
ro1
ro2
rp
rss
vb
vc
ve
vlim
vlp
vln
.model
.model
.model
3
90
11
12
6
4
4
8
7
3
10
9
3
54
7
91
0
dx
dy
jx1
.model
jx2
.ends
*$
Figure 64. Boyle Macromodel and Subcircuit
PSpice and Parts are trademarks of MicroSim Corporation.
36
91
+
vlp
7
C1
rd1
+ dlp
−
r2
−
53
dc
12
hlim
−
+
10
90
ro2
vb
rp
1
92
fb
−
+
iss
dln
+
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
OUT
10
dc
145.50E−6
0
vlim 1K
2
10 jx1
1
10 jx2
9
100.00E3
11
5.3052E3
12
5.3052E3
5
17.140
99
17.140
4
4.5455E3
99
1.3746E6
0
dc 0
53
dc .82001
4
dc .82001
8
dc 0
0
dc 47
92
dc 47
D(Is=800.00E−18)
D(Is=800.00E−18 Rs=1m Cjo=10p)
PJF(Is=2.2500E−12 Beta=244.20E−6
+ Vto=−.99765)
PJF(Is=1.7500E−12 Beta=244.20E−6
+ Vto=−1.002350)
PACKAGE OPTION ADDENDUM
www.ti.com
17-Aug-2012
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package
Drawing
Pins
Package Qty
Eco Plan
(2)
Lead/
Ball Finish
MSL Peak Temp
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
TLV2772AQDRG4Q1
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
TLV2772AQDRQ1
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
TLV2772AQPWRG4Q1
ACTIVE
TSSOP
PW
8
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
TLV2772AQPWRQ1
ACTIVE
TSSOP
PW
8
TLV2772QDRG4Q1
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
TBD
Call TI
Samples
(Requires Login)
TLV2771QDBVRQ1
TBD
(3)
Call TI
CU NIPDAU Level-1-260C-UNLIM
TLV2772QDRQ1
ACTIVE
SOIC
D
8
TLV2772QPWRG4Q1
ACTIVE
TSSOP
PW
8
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
Call TI
Call TI
TLV2772QPWRQ1
ACTIVE
TSSOP
PW
8
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
17-Aug-2012
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF TLV2771-Q1, TLV2772-Q1, TLV2772A-Q1 :
• Catalog: TLV2771, TLV2772, TLV2772A
• Enhanced Product: TLV2772A-EP
• Military: TLV2772M, TLV2772AM
NOTE: Qualified Version Definitions:
• Catalog - TI's standard catalog product
• Enhanced Product - Supports Defense, Aerospace and Medical Applications
• Military - QML certified for Military and Defense Applications
Addendum-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All
semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time
of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which
have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such
components to meet such requirements.
Products
Applications
Audio
www.ti.com/audio
Automotive and Transportation www.ti.com/automotive
Amplifiers
amplifier.ti.com
Communications and Telecom www.ti.com/communications
Data Converters
dataconverter.ti.com
Computers and Peripherals
www.ti.com/computers
DLP® Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
Energy and Lighting
www.ti.com/energy
Clocks and Timers
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
OMAP Mobile Processors
www.ti.com/omap
TI E2E Community
e2e.ti.com
Wireless Connectivity
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2012, Texas Instruments Incorporated