KINGBRIGHT WP34YD

T-1 (3mm) SOLID STATE LAMP
WP34YD
YELLOW
Features
Description
•LOW POWER CONSUMPTION.
The Yellow source color devices are made with Gallium
•POPULAR T-1 DIAMETER PACKAGE.
Arsenide Phosphide on Gallium Phosphide Yellow Light
•GENERAL PURPOSE LEADS.
Emitting Diode.
•RELIABLE AND RUGGED.
•LONG LIFE - SOLID STATE RELIABILITY.
•AVAILABLE ON TAPE AND REEL.
•RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
SPEC NO: DSAF0516
REV NO: V.2
DATE: APR/16/2005
PAGE: 1 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.W.WANG
ERP:1101003660
Selection Guide
Part No.
Dice
WP34YD
Iv (mcd)
@ 10mA
Lens Type
YELLOW (GaAsP/GaP)
YELLOW DIFFUSED
Viewing
Angle
Min.
Typ.
2θ
θ1/2
1.8
6
60°
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
λpeak
Peak Wavelength
Yellow
λD
Dominant Wavelength
∆λ1/2
Typ.
Max.
Units
Test Conditions
590
nm
IF=20mA
Yellow
588
nm
IF=20mA
Spectral Line Half-width
Yellow
35
nm
IF=20mA
C
Capacitance
Yellow
20
pF
VF=0V;f=1MHz
VF
Forward Voltage
Yellow
2.1
2.5
V
IF=20mA
IR
Reverse Current
Yellow
10
uA
VR = 5V
Absolute Maximum Ratings at TA=25°C
Parameter
Yellow
Units
Power dissipation
105
mW
DC Forward Current
30
mA
Peak Forward Current [1]
140
mA
5
V
Reverse Voltage
Operating / Storage Temperature
-40°C To +85°C
Lead Solder Temperature [2]
260°C For 3 Seconds
Lead Solder Temperature [3]
260°C For 5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
SPEC NO: DSAF0516
REV NO: V.2
DATE: APR/16/2005
PAGE: 2 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.W.WANG
ERP:1101003660
Yellow
WP34YD
SPEC NO: DSAF0516
REV NO: V.2
DATE: APR/16/2005
PAGE: 3 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.W.WANG
ERP:1101003660
PACKING & LABEL SPECIFICATIONS
WP34YD
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical
accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
SPEC NO: DSAF0516
REV NO: V.2
DATE: APR/16/2005
PAGE: 4 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.W.WANG
ERP:1101003660