KINGBRIGHT WP7104PBD-A

T-1 (3mm) SOLID STATE LAMP
Part Number : WP7104PBD/A
PRELIMINARY SPEC
BLUE
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
Description
●LOW POWER CONSUMPTION.
The Blue source color devices are made with InGaN
●POPULAR T-1 DIAMETER PACKAGE.
on SiC Light Emitting Diode.
●GENERAL PURPOSE LEADS.
Static electricity and surge damage the LEDS.
●RELIABLE AND RUGGED.
It is recommended to use a wrist band or
●LONG LIFE - SOLID STATE RELIABILITY.
anti-electrostatic glove when handling the LEDs.
●AVAILABLE ON TAPE AND REEL.
All devices, equipment and machinery must be electri-
●RoHS COMPLIANT.
cally grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
SPEC NO: DSAG1575
REV NO: V.4
DATE: OCT/18/2006
PAGE: 1 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Z.Z.YANG
ERP: 1101013158
Selection Guide
Dice
Part No.
WP7104PBD/A
Iv (mcd) [2]
@ 20mA
Lens Type
BLUE (InGaN)
BLUE DIFFUSED
Viewing
Angle [1]
Min.
Typ.
2 θ 1/2
180
700
30°
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2.Luminous Intensity / Luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
λpeak
Peak Wavelength
Blue
λD [1]
Dominant Wavelength
Δλ1/2
Typ.
Max.
Units
Test Conditions
468
nm
IF=20mA
Blue
470
nm
IF=20mA
Spectral Line Half-width
Blue
21
nm
IF=20mA
C
Capacitance
Blue
100
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Blue
3.3
3.8
V
IF=20mA
IR
Reverse Current
Blue
10
uA
VR = 5V
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Blue
Units
Power dissipation
114
mW
DC Forward Current
30
mA
Peak Forward Current [1]
100
mA
5
V
1000
V
Reverse Voltage
Electrostatic Discharge Threshold (HBM)
Operating/Storage Temperature
-40°C To +85°C
Lead Solder Temperature [2]
260°C For 3 Seconds
Lead Solder Temperature [3]
260°C For 5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
SPEC NO: DSAG1575
REV NO: V.4
DATE: OCT/18/2006
PAGE: 2 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Z.Z.YANG
ERP: 1101013158
Blue
WP7104PBD/A
SPEC NO: DSAG1575
REV NO: V.4
DATE: OCT/18/2006
PAGE: 3 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Z.Z.YANG
ERP: 1101013158
PACKING & LABEL SPECIFICATIONS
WP7104PBD/A
SPEC NO: DSAG1575
REV NO: V.4
DATE: OCT/18/2006
PAGE: 4 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Z.Z.YANG
ERP: 1101013158