part number: www.SunLED.com XZMDK45W 3.5x2.8 mm SMD CHIP LED LAMP Features SINGLE COLOR. SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER PROCESS. AVAILABLE ON TAPE AND REEL. IDEAL FOR BACKLIGHTING. PACKAGE : 1500PCS / REEL. RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. Absolute maximum ratings (TA=25°C)) MDK (InGaAlP) Unit Reverse voltage VR 5 V Forward current IF 30 mA Forward current (peak) 1/10Duty cycle 0.1ms pulse width iFS 185 mA Power dissipation PT 75 mW Operating temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage temperature Part Number XZMDK45W Emitting Color Red Published Date : MAR 15,2005 Emitting Material InGaAlP °C Operating Characteristics (TA=25°C)) Unit Forward voltage (typ.) (IF=20mA) VF 1.95 V Forward voltage (max.) (IF=20mA) VF 2.5 V Reverse current (VR=5V) IR 10 uA λ peak 650 nm Wavelength of Dominant emission (IF=20mA) λD 635 nm Spectral Line half-width (IF=20mA) ∆λ 28 nm Capacitance (VF=0V, f=1MHz) C 35 pF Wavelength at peak emission (IF=20mA) Luminous Intensity (IF=20mA) mcd Lens-color Water Clear Drawing No :XDSA0532 MDK (InGaAlP) V4 min. typ. 70 198 Wavelength nm λP Viewing Angle 2 θ 1/2 650 120° Checked : B.L.LIU P. 1/3 part number: www.SunLED.com XZMDK45W 3.5x2.8 mm SMD CHIP LED LAMP MDK Published Date : MAR 15,2005 Drawing No :XDSA0532 V4 Checked : B.L.LIU P. 2/3 part number: www.SunLED.com XZMDK45W 3.5x2.8 mm SMD CHIP LED LAMP Recommended Soldering Pattern (Units : mm;Tolerance:±0.1) Tape Specification (Units : mm) If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 15,2005 Drawing No :XDSA0532 V4 Checked : B.L.LIU P. 3/3