1733 Reader's Spreads pg1-203:document 1/27/09 4:08 PM Page 103 PMS 300 neg. Black neg. zero ohm jumpers EU features • • • • • Type Z are conformal coated Type J are molded Suitable for automatic machine insertion Size compatible with 1/8, 1/4 and 1/2 watt resistors Marking: Type Z are tan color, single black band identifier Type J are black, no marking • Products with lead-free terminations meet EU RoHS and China RoHS requirements dimensions and construction Type Z D L l d Type J Insulation Marking Resistive End Coating Film Cap C Lead Wire L l D Type Z16 .126±.008 (3.2±0.2) Z25 .240±.02 (6.1±0.5) Z25Y J1/6Z d J1/4Z Molded Resin L (ref.) Dimensions inches (mm) C (max.) D d (nom.) .228 (5.8) .134 +.004 -.008 (3.4 +0.1 -0.2) .256±.02 (6.5±0.5) .134 (3.4) .280 (7.1) –– –– .067 +.008 -.004 (1.7 +0.2 -0.1 ) .091±.012 (2.3±0.3) .087±.004 (2.2±0.1) .067±.008 (1.7±0.2) .091 +0 -.012 (2.3 +0 -0.3 ) .018 (0.45) l .787 min. (20.0 min.) .024 (0.6) .020 (0.5) 1.18±.118 (30.0±3.0) .024 (0.6) Solder Plated Copper Wire ordering information New Part # Z16 C T52 A Type Termination Material Taping and Forming Packaging Z16 Z25 Z25Y J1/4Z J1/6Z C: SnCu T26, T52 A: Ammo R: Reel For further information on packaging, please refer to Appendix C. Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 11/17/08 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com 105 resistors Z, J 1733 Reader's Spreads pg1-203:document 1/27/09 4:08 PM Page 104 Z, J resistors zero ohm jumpers applications and ratings Maximum Amperage Minimum Dielectric Withstanding Voltage Z16 1.5A 300V Z25 2.5A 500V Z25Y 15A 500V J1/6Z 8A — J1/4Z 10A — Part Designation Resistance Rated Ambient Temperature Operating Temperature Range +70°C -55°C to +155°C 20mΩ or less 20mΩ or less 10mΩ Max. -55°C to +125°C environmental applications Derating Curve 15 Z25Y 12 Amps J1/4Z 9 J1/6Z 6 Z25 3 0 -80 Z16 -40 -55 0 40 80 120 70 125 Ambient Temperature (°C) 160 155 Performance Characteristics Parameter Resistance Resistance to Solder Heat Requirement Less than 20mΩ Solderability 90% coverage minimum Terminal Strength No mechanical damages Rapid Change of Temperature Moisture Resistance Endurance @ 70°C Solvent Resistance Less than 20mΩ No visible damages to protective coating and marking Test Method Measuring points are 10mm ± 1mm from the end cap Terminal except 3mm shall be immersed in the solder, 350°C ± 5°C, 3.5 seconds ± 0.5 second 235°C ± 5°C, 5 seconds ± 0.5 second (Direct Load) Z16: 5N, 30 seconds, Z25: 10N, 30 seconds (Twist Test) 360°, 5 times (Bending Test) 5N, 90°, 2 times (Z16: 2.5N) -55°C (30 minutes)/+85°C (30 minutes), 5 cycles 40°C ±2°C, 90-95% RH, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle 70°C ±2°C, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle Isopropyl alcohol with ultrasonic cleansing for 2 minutes Power: 0.3W/cm2, f: 28kHz, Temperature: 35°C ± 5°C Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 106 11/17/08 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com