Datamate Tooling Instruction sheets (where available) can be accessed at www.harwin.com/downloads/instructions separator tool INSERTION/REMOVAL Tool For inserting crimped contacts into the rear of mouldings. Instruction sheet available. Suitable for all Datamate signal contacts. Recommended for unplugging L-Tek latched connectors (tool releases the latches prior to disengagement). Can also be used with unlatched and friction lock connectors. Suitable for all sizes. Order Code L-Tek Order Code T5746 hand crimp tool Signal crimps for L-Tek, J-Tek & Mix-Tek Z80-280 REMOVAL Tool Standard coax crimp tool for crimping the outer sleeve of Mix-Tek coax contacts. Instruction sheet available. To aid removal of special cable contacts from Mix-Tek connectors. Order Code Outer sleeve of Mix-Tek coax contacts Order Code Z80-293 Mix-Tek special cable connectors Z80-290 www.harwin.com 79