IRCTT ZCHP2-7

Cylindrical Surface Mount
Zerohm Jumpers
Metal Glaze™ thick
film element fired
at 1000°C to solid
ceramic substrate
ZCHP Series
•
•
•
•
Reliable Metal Glaze™ technology
Available in all standard CHP sizes
Superb solderability - reflow and wave
Operating temperature -55°C to +150°C
High
temperature
dielectric
coating
Solder over nickel
barrier
Applications
Zerohm Jumpers or Crossovers are basically interconnection devices bewtween points on a PC board. Typically, they are used
to connect two points on a PC board due to other circuit paths which must be crossed over. The XCHP Jumpers are available in
four case sizes and are supplied on tape and reel to support high volume placement.
Electrical Data
Size Code
Industry Footprint
IRC Type
Maximum Resistance
(mΩ)
Current Rating @ 25°C
(amps)²
B
1206
ZCHP 1/8
20
3
D
2010
ZCHP 1/2
30
4
F
2512
ZCHP 1
35
5
H
3610
ZCHP 2
35
6
² Derate current to "0" amps at 150°C.
Ordering Data
Sample Part No.
ZCHP 1
- 13
IRC Type
(CHP 1/8, CHP 1/2, CHP 1, or CHP 2)
Packaging Code*
BLK = Bulk, 7 = 7" Reel, 13 = 13" Reel
General Note
IRC reserves the right to make changes in product specification without notice or liability.
All information is subject to IRC’s own data and is considered accurate at time of going to print.
© IRC Wire and Film Technologies Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA
Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com
A subsidiary of
TT electronics plc
ZCHP Series Issue September 2008 Sheet 1 of 1