Part Number: www.SunLED.com ZM2CR79W 3.8x2.0mm DOME LENS SMD CHIP LED LAMP PRELIMINARY SPEC Features z 3.8mmx2.0mm z LOW POWER CONSUMPTION. z IDEAL FOR BACK LIGHT AND INDICATOR. z VARIOUS COLORS AND LENS TYPES AVAILABLE. z PACKAGE : 500PCS / REEL. zMOISTURE z RoHS SMT LED,3.2mm THICKNESS. SENSITIVITY LEVEL : LEVEL 3. COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.2(0.008") unless otherwise noted. 3.Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) M2CR (AlInGaP) Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 150 mA Power Dissipation PT 84 mW Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature Part Number ZM2CR79W Emitting Color Red Published Date : FEB 26, 2008 Emitting Material AlInGaP Operating Characteristics (TA=25°C) °C Lens-color Water Clear Drawing No : SDSA6326 M2CR (AlInGaP) Unit Forward Voltage (Typ.) (IF=20mA) VF 2.2 V Forward Voltage (Max.) (IF=20mA) VF 2.8 V Reverse Current (Max.) (VR=5V) IR 10 uA Wavelength Of Peak Emission (Typ.) (IF=20mA) λP 640 nm Wavelength Of Dominant Emission (Typ.) (IF=20mA) λD 630 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Δλ 25 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 27 pF Luminous Intensity (IF=20mA) mcd Wavelength nm λP Viewing Angle 2 θ 1/2 640 60°(H) 35°(V) min. typ. 1200 1990 V1 Checked : B.L.LIU P.1/4 Part Number: www.SunLED.com ZM2CR79W 3.8x2.0mm DOME LENS SMD CHIP LED LAMP M2CR Published Date : FEB 26, 2008 Drawing No : SDSA6326 V1 Checked : B.L.LIU P.2/4 Part Number: www.SunLED.com ZM2CR79W 3.8x2.0mm DOME LENS SMD CHIP LED LAMP Recommended Soldering Pattern (Units: mm ; Tolerance: ± 0.1) The device has a single mounting surface. The device must be mounted according to the specifications. Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity/ luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity/ Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : FEB 26, 2008 Drawing No : SDSA6326 V1 Checked : B.L.LIU P.3/4 Part Number: www.SunLED.com 3.8x2.0mm DOME LENS SMD CHIP LED LAMP PACKING & LABEL SPECIFICATIONS Published Date : FEB 26, 2008 ZM2CR79W Drawing No : SDSA6326 ZM2CR79W V1 Checked : B.L.LIU P.4/4