VER : C_0 update : 2012.01.20 LED Power ZQF60 SERIES 60 Watts KEY FEATURES Open Frame LED Power Supply With Constant Current & Constant Voltage (C.C+C.V mode) Dimming fuction:0~10VDC & PWM Duty Controlled Universal Input: 100-240 VAC With P.F.C. Function, PF>0.9 Free Air Convection Protections: Over Load / Over Voltage / Short Circuit High Reliability & Double Layered PCB Ultra Compact Size: 4.0 x 2.0 x 1.12 Inches 3-Years Product Warranty ELECTRICAL SPECIFICATIONS All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated. ZQF6013.5S 3570 60W Model No. Max output wattage (W) Voltage Input Output Protection Isolation (Note2) Physical Safety EMC ZQF6028S 1400 ZQF60 -48S 825 ZQF6054S 700 90-264 VAC Frequency (Hz) 50 / 60 Hz Power factor PF>0.9 at Full load (115 VAC / 230 VAC) Current (Full load) 0.8A max. (115 VAC) / 0.4A max. (230 VAC) Inrush current 50 A max. (Cold Start at 230 VAC) Leakage Current < 0.7 mA max at 240 VAC / 63 Hz Voltage (V.DC.) Constant Current Operation Voltage (max) (CC Mode) (Note3) Voltage Tolerance 13.5V 24V 28V 48V 54V 11~13.5VDC 17~ 24VDC 21~28VDC 33.5~ 48VDC 38~54VDC ±10% Current Adjustment Range (mA) (CC Mode) 3570 ~ 4200 1700 ~ 2500 1400 ~ 2100 825 ~ 1250 700 ~ 1100 Minimum Load (mA) (current curve as per page-3) 3570 1700 1400 825 700 Line Regulation (115-230) (typ.) ±4% Load Regulation (Min-Max) (typ.) ±5% Ripple & Noise (max) 4Vp-p 4.5Vp-p 5Vp-p 5Vp-p 5Vp-p 87% 89% 89% 89% Efficiency (at 230VAC.)(typ) 85% Over current protection Auto recovery Over voltage protection Zener diode clamp Short circuit protection Auto recovery Input-Output (V.AC) 3750V Input-FG (V.AC) 1880V Output-FG .(V.AC) Operating temperature Environment ZQF6024S 1700 500V -30°C…+70°C (with derating) Storage temperature -40°C…+85°C Temperature coefficient 0.02%/°C Humidity 95% RH MTBF >583,000 h @ 25°C (MIL-HDBK-217F) Dimension (L x W x H) 4.0 x 2.0 x 1.12 Inches Weight 165 g Cooling method Free air convection ( 101.6 x 50.8 x 28.5 mm ) Tolerance ±0.5 mm Agency Approvals UL8750、IEC / EN 61347-2-13、 IEC / EN 61347-1 EMI (Conducted & Radiated Emission) EN 55015 EMS (Noise Immunity) EN 61547 Harmonic Current EN 61000-3-2(at Full Load)、EN 61000-3-3 http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -1- VER : C_0 update : 2012.01.20 LED Power ZQF60 SERIES 60 Watts Note: 1. Ripple & Noise are measured at 20MHz of bandwidth with 0.1uF & 47uF parallel capacitor. 2.Please check the derating curve for more details. 3..Input Voltage=115 or 230 VAC。This is the suitable operation region for LED related application.but please reconfirm special electrical requirements for some specific ststem design. MECHANICAL DIMENSION ( Top View ) PIN# SINGLE 1 AC IN (N) 2 AC IN (L) 3 +Dim 4 +DC OUT 5 -DC OUT DERATING BLOCK DIAGRAM http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -2- VER : C_0 update : 2012.01.20 LED Power ZQF60 SERIES 60 Watts DIMMING CONTROL ( CC Mode ) (at 230VAC) ZQF60-13.5 4200 Output Current 4050 3900 3750 3600 3450 3300 3150 3000 0V or 0% or Open 1V or 10% 2V or 20% 3V or 30% 4V or 40% 5V or 50% 6V or 60% 7V or 70% 8 or 80% 9 or 90% 10V or 100% DC Input Voltage or PWM(10V) Duty ZQF60-24S ZQF60-28S 2550 2200 2400 2050 Output Current(mA) Output Current(mA) 2700 2250 2100 1950 1800 1900 1750 1600 1450 1650 1500 1300 0V or 0% or Open 1V or 10% 2V or 20% 3V or 30% 4V or 40% 5V or 50% 6V or 60% 7V or 70% 8 or 80% 9 or 90% 10V or 100% 0V or 0% or Open 1V or 10% 2V or 20% DC Input Voltage or PWM(10V) Duty 3V or 30% 4V or 40% 5V or 50% 6V or 60% 7V or 70% 8 or 80% 9 or 90% 10V or 100% 8V or 80% 9V or 10V or 90% 100% DC Input Voltage or PWM(10V) Duty ZQF60-48S ZQF60-54S 1325.0 1400.0 1175.0 1200.0 1100.0 1025.0 Output Current(mA) Output Current(mA) 1250.0 1300.0 1100.0 1000.0 900.0 950.0 875.0 800.0 725.0 650.0 800.0 575.0 700.0 0V or 1V or 0% or 10% Open 500.0 2V or 20% 3V or 30% 4V or 40% 5V or 50% 6V or 60% 7V or 70% DC Input Voltage or PWM(10V) Duty http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 8 or 80% 9 or 90% 10V or 100% 0V or 0% or Open 1V or 10% 2V or 20% 3V or 30% 4V or 40% 5V or 50% 6V or 60% 7V or 70% DC Input Voltage or PWM(10v) Duty -3-