NPN SILICON PLANAR MEDIUM POWER HIGH CURRENT TRANSISTOR ZTX853 ELECTRICAL CHARACTERISTICS (at Tamb = 25°C) MIN. TYP. MAX. UNIT CONDITIONS. 830 950 V IC=4A, VCE=2V* PARAMETER SYMBOL Base-Emitter Turn-On Voltage VBE(on) Static Forward Current Transfer Ratio hFE Transition Frequency fT 130 MHz IC=100mA, VCE=10V f=50MHz Output Capacitance Cobo 35 pF VCB=10V, f=1MHz Switching Times ton toff 50 1650 ns ns IC=1A, IB!=100mA IB2=100mA, VCC=10V 200 200 100 30 100 100 50 20 IC=10mA, VCE=2V IC=2A, VCE=2V* IC=4A, VCE=2V* IC=10A, VCE=2V* 300 *Measured under pulsed conditions. Pulse width=300µs. Duty cycle ≤2% THERMAL CHARACTERISTICS PARAMETER SYMBOL MAX. UNIT Rth(j-amb) Rth(j-case) 150 50 °C/W °C/W Thermal Resistance: Junction to Ambient Junction to Case ZTX853 ISSUE 3 - NOVEMBER 1995 FEATURES * 100 Volt VCEO * 4 Amps continuous current * Up to 10 Amps peak current * Very low saturation voltage * Ptot=1.2 Watts C B E E-Line TO92 Compatible ABSOLUTE MAXIMUM RATINGS. PARAMETER SYMBOL VALUE UNIT V Collector-Base Voltage VCBO 200 Collector-Emitter Voltage VCEO 100 V Emitter-Base Voltage VEBO 6 V A Peak Pulse Current ICM 10 Continuous Collector Current IC 4 A Practical Power Dissipation* Ptotp 1.58 W Power Dissipation at Tamb=25°C Ptot Operating and Storage Temperature Range Tj:Tstg 1.2 W -55 to +200 °C *The power which can be dissipated assuming the device is mounted in a typical manner on a P.C.B. with copper equal to 1 inch square minimum 4.0 3.0 Thermal Resistance (°C/W) Max Power Dissipation - (Watts) ELECTRICAL CHARACTERISTICS (at Tamb = 25°C unless otherwise stated) Ca se 2.0 te m pe ra tu re Amb ient te mpe ratu 1.0 -40 -20 0 20 40 re 60 80 100 120 140 160 180 200 D.C. 150 t1 100 D=t1/tP tP D=0.6 50 D=0.2 D=0.1 0 0.0001 D=0.05 Single Pulse 0.001 0.01 0.1 1 10 100 T -Temperature (°C) Pulse Width (seconds) Derating curve Maximum transient thermal impedance 3-298 PARAMETER SYMBOL MIN. TYP. Collector-Base Breakdown Voltage V(BR)CBO 200 Collector-Emitter Breakdown Voltag V(BR)CER Collector-Emitter Breakdown Voltage UNIT CONDITIONS. 300 V IC=100µA 200 300 V IC=1µA, RB ≤1KΩ V(BR)CEO 100 120 V IC=10mA* Emitter-Base Breakdown Voltage V(BR)EBO 6 8 V IE=100µA Collector Cut-Off Current ICBO 50 1 µA nA VCB=150V VCB=150V, Tamb=100°C Collector Cut-Off Current ICER R ≤1KΩ 50 1 µA nA VCB=150V VCB=150V, Tamb=100°C Emitter Cut-Off Current IEBO 10 nA VEB=6V Collector-Emitter Saturation Voltage VCE(sat) 14 100 160 50 150 200 mV mV mV IC=0.1A, IB=5mA IC=2A, IB=100mA IC=4A, IB=400mA* Base-Emitter Saturation Voltage VBE(sat) 960 1100 mV IC=4A, IB=400mA* 3-297 MAX. NPN SILICON PLANAR MEDIUM POWER HIGH CURRENT TRANSISTOR ZTX853 ELECTRICAL CHARACTERISTICS (at Tamb = 25°C) MIN. TYP. MAX. UNIT CONDITIONS. 830 950 V IC=4A, VCE=2V* PARAMETER SYMBOL Base-Emitter Turn-On Voltage VBE(on) Static Forward Current Transfer Ratio hFE Transition Frequency fT 130 MHz IC=100mA, VCE=10V f=50MHz Output Capacitance Cobo 35 pF VCB=10V, f=1MHz Switching Times ton toff 50 1650 ns ns IC=1A, IB!=100mA IB2=100mA, VCC=10V 200 200 100 30 100 100 50 20 IC=10mA, VCE=2V IC=2A, VCE=2V* IC=4A, VCE=2V* IC=10A, VCE=2V* 300 *Measured under pulsed conditions. Pulse width=300µs. Duty cycle ≤2% THERMAL CHARACTERISTICS PARAMETER SYMBOL MAX. UNIT Rth(j-amb) Rth(j-case) 150 50 °C/W °C/W Thermal Resistance: Junction to Ambient Junction to Case ZTX853 ISSUE 3 - NOVEMBER 1995 FEATURES * 100 Volt VCEO * 4 Amps continuous current * Up to 10 Amps peak current * Very low saturation voltage * Ptot=1.2 Watts C B E E-Line TO92 Compatible ABSOLUTE MAXIMUM RATINGS. PARAMETER SYMBOL VALUE UNIT V Collector-Base Voltage VCBO 200 Collector-Emitter Voltage VCEO 100 V Emitter-Base Voltage VEBO 6 V A Peak Pulse Current ICM 10 Continuous Collector Current IC 4 A Practical Power Dissipation* Ptotp 1.58 W Power Dissipation at Tamb=25°C Ptot Operating and Storage Temperature Range Tj:Tstg 1.2 W -55 to +200 °C *The power which can be dissipated assuming the device is mounted in a typical manner on a P.C.B. with copper equal to 1 inch square minimum 4.0 3.0 Thermal Resistance (°C/W) Max Power Dissipation - (Watts) ELECTRICAL CHARACTERISTICS (at Tamb = 25°C unless otherwise stated) Ca se 2.0 te m pe ra tu re Amb ient te mpe ratu 1.0 -40 -20 0 20 40 re 60 80 100 120 140 160 180 200 D.C. 150 t1 100 D=t1/tP tP D=0.6 50 D=0.2 D=0.1 0 0.0001 D=0.05 Single Pulse 0.001 0.01 0.1 1 10 100 T -Temperature (°C) Pulse Width (seconds) Derating curve Maximum transient thermal impedance 3-298 PARAMETER SYMBOL MIN. TYP. Collector-Base Breakdown Voltage V(BR)CBO 200 Collector-Emitter Breakdown Voltag V(BR)CER Collector-Emitter Breakdown Voltage UNIT CONDITIONS. 300 V IC=100µA 200 300 V IC=1µA, RB ≤1KΩ V(BR)CEO 100 120 V IC=10mA* Emitter-Base Breakdown Voltage V(BR)EBO 6 8 V IE=100µA Collector Cut-Off Current ICBO 50 1 µA nA VCB=150V VCB=150V, Tamb=100°C Collector Cut-Off Current ICER R ≤1KΩ 50 1 µA nA VCB=150V VCB=150V, Tamb=100°C Emitter Cut-Off Current IEBO 10 nA VEB=6V Collector-Emitter Saturation Voltage VCE(sat) 14 100 160 50 150 200 mV mV mV IC=0.1A, IB=5mA IC=2A, IB=100mA IC=4A, IB=400mA* Base-Emitter Saturation Voltage VBE(sat) 960 1100 mV IC=4A, IB=400mA* 3-297 MAX. ZTX853 TYPICAL CHARACTERISTICS 1.6 0.6 0.4 IC/IB=10 IC/IB=50 0.2 0 300 1.4 1.2 1.0 0.8 0.6 0.1 1 10 VCE=5V VCE=1V 100 0.4 0.2 0 0.01 200 100 0.01 IC - Collector Current (Amps) 0.1 1 100 10 IC - Collector Current (Amps) VCE(sat) v IC hFE v IC VCE=1V 2.0 VBE - (Volts) VBE(sat) - (Volts) 2.0 1.5 IC/IB=50 1.0 0.5 IC - Collector Current (Amps) 0.01 0.1 1 10 100 0.01 0.1 0.001 0.01 0.1 1 10 IC - Collector Current (Amps) IC - Collector Current (Amps) VBE(sat) v IC VBE(on) v IC Single Pulse Test at Tamb=25°C 1 0.1 1.0 0.5 0.001 10 1.5 D.C. 1s 100ms 10ms 1.0ms 0.1ms 1 10 100 VCE - Collector Voltage (Volts) Safe Operating Area 3-299 100 hFE - Typical Gain hFE - Normalised Gain VCE(sat) - (Volts) 0.8