ZWQ-SERIES Quad output 80W ~ 130W 䡵 Model name ZWQ 80-5225/ ZWQ80 (with -cover type) Series Name Output Voltage Output Wattage Option blank: PCB type L: L-shape metal plate type A: with-cover type ZWQ130 ZWQ80 1 year warranty PC Board Type Power Supply 䡵 Features 䢇 Built-in Active Filter , PFHC type (EN61000-3-2) 䢇 Compact, thin, PCB type Power Supply with quad output 䢇 Wide output voltage range V2.V3 output:Ⳳ12V/Ⳳ15V selectable 24V(30V) available by connecting in series V4 output: 2V,3.3V,5V covered by 5V output (2.0-5.25V) 䢇 Equipped with Remote ON/OFF control 䢇 Wide input voltage range: 85-265VAC 䢇 1 year warranty 䡵 Specifications 1. Input voltage range 85~265VAC (47~63Hz), 120~370VDC universal input 2. Power factor 0.99 (typ) 100VAC at full load, 0.93(typ) 200VAC at full load 3. Output voltage range V1 : +5V = +5.0~+5.25V V2 : +12V / +15V selectable V3 : -12V / -15V selectable V4 : +5V = +2.0V~5.25V, +12V = +11.4V~12.6V, +24V = 22.8V~25.2V 4. Cooling Convection cooling Convection cooling -10°C~+40°C:100%, +60°C:50% 5. Operating ambient (Open frame type, Standard mounting) temperature 6. Withstand voltage Input-output : 3kVAC (20mA) , Input-chassis : 2kVAC (20mA) , Output-chassis : 500VAC (100mA) for 1 min 7. Safety standard ZWQ80 : Approved by UL1950 , CSA950(C-UL) , EN60950(TUV) ZWQ130 : Conforms to UL1950, CSA950, EN60950, VDE0160 8. CE marking Conforms to low voltage directive Meets EN55011-B, EN55022-B, FCC-B, VCCI-B Meets EN61000-3-2 Over voltage protection, Over current protection, Remote on/off control 9. EMI 10. PFHC 11. Functions , VDE0160(TUV) 䡵 Product lineup Model name CH ZWQ80-5225 ZWQ80 ZWQ80-5222 ZWQ80-5224 ZWQ130-5225 ZWQ130 ZWQ130-5222 ZWQ130-5224 V1 V2 V3 V4 V1 V2 V3 V4 V1 V2 V3 V4 V1 V2 V3 V4 V1 V2 V3 V4 V1 V2 V3 V4 Nominal Max. Min. output Max. peak Total max. output voltage current (at peak) output current output current output power 8.0A 0.9A(1.4A) 10.0A 5V 2.0A 0A 2.5A 12(15)V 80W (Peak 104W) 2.0A –12(–15)V 0A 2.5A 7.0A 5V 0A 9.0A 8.0A 5V 0.9A(1.4A) 10.0A 12(15)V 2.0A 0A 2.5A 80W (Peak 104W) –12(–15)V 2.0A 0A 2.5A 12V 0A 3.0A 4.0A 5V 0.9A(1.4A) 10.0A 8.0A 12(15)V 0A 2.5A 2.0A 80W (Peak 104W) –12(–15)V 0A 2.5A 2.0A 24V 0A 2.0A 1.5A 5V 1.5A(2.1A) 19.0A 15A 12(15)V 0A 5.0A 4.0A 130W (Peak 170W) –12(–15)V 0A 5.0A 4.0A 5V 0A 12.0A 10.0A 5V 1.5A(2.1A) 19.0A 15.0A 12(15)V 0A 5.0A 4.0A 130W (Peak 170W) –12(–15)V 0A 5.0A 4.0A 12V 0A 5.0A 4.0A 5V 1.5A(2.1A) 19.0A 15.0A 12(15)V 0A 5.0A 4.0A 130W (Peak 170W) –12(–15)V 0A 5.0A 4.0A 24V 0A 2.5A 2.0A UL CSA EN 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬 : Safety standard approved 87 ZWQ-SERIES 䡵 ZWQ80 PC Board Type Power Supply (Unit: mm) = NOTE = A : MODEL NAME, INPUT VOLTAGE RANGE, NOMINAL OUTPUT VOLTAGE, MAXIMUM OUTPUT CURRENT AND COUNTRY OF MANUFACTURE ARE SHOWN HERE IN ACCORDANCE WITH THE SPECIFICATIONS. B : 5-ø3.5 HOLES FOR CUSTUMER'S CHASSIS MOUNTING HOLES. ALL MUST BE SCREWED IN ORDER TO CONFORM THE VIBRATION SPEC. C : KEEP THE DISTANCE MORE THAN 4mm BETWEEN PCB EDGE AND COSTOMER'S CHASSIS. D : FG IS FOR SAFETY GROUND CONNECTION. E : REMOTE ON/OFF CONTROL CONNECTOR (CN2, 53) : B2B-XH-AM (J.S.T.) MATCHING HOUSING : XHP-2 (J.S.T.) MATCHING TERMINAL : BXH-001T-P0.6 (J.S.T.) OR SXH-001T-P0.6 (J.S.T.) *CN2 IS NORMALLY SHORTED BY JM-2W-96 (J.S.T.). F : CONNECTOR TO CHANGE V2, V3 OUTPUT VOLTAGE(CN54) : B4B-XH-AM (J.S.T.) J61 SHORT : V2 OUTPUT VOLTAGE IS +12V. (*) J61 OPEN : V2 OUTPUT VOLTAGE IS +15V. J71 SHORT : V3 OUTPUT VOLTAGE IS -12V. (*) J71 OPEN : V3 OUTPUT VOLTAGE IS -15V. *J61 AND J71 ARE NORMALLY SHORTED BY JM-2W-96(J.S.T.) CONNECTORS USED: PART DESCRIPTION PART NAME PIN HEADER (INPUT SIDE CN1) B3P-5-VH PIN HEADER (OUTPUT SIDE CN51) B8P-VH PIN HEADER (OUTPUT SIDE CN52) B4P-VH MANUFACT. QTY J.S.T. 1 J.S.T. 1 J.S.T. 1 *OUTPUT CURRENT OF EACH CONNECTOR PIN MUST BE LESS THAN 5A. MATCHING HOUSINGS & PINS (NOT INCLUDED WITH THE PRODUCT): PART DESCRIPTION SOCKET HOUSING (CN1) SOCKET HOUSING (CN51) SOCKET HOUSING (CN52) TERMINAL PINS (CN1, 51, 52) PART NAME MANUFACT. QTY VHR-5N J.S.T. 1 J.S.T. 1 VHR-8N VHR-4N J.S.T. 1 SVH-21T-P1.1 J.S.T. 15 HAND CRIMPING TOOL : YC-160R MANUFACT : J.S.T. 䡵 ZWQ130 (Unit: mm) = NOTE = A : MODEL NAME, INPUT VOLTAGE RANGE, NOMINAL OUTPUT VOLTAGE, MAXIMUM OUTPUT CURRENT AND COUNTRY OF MANUFACTURE ARE SHOWN HERE IN ACCORDANCE WITH THE SPECIFICATIONS. B : 4-ø3.5 HOLES FOR CUSTUMER'S CHASSIS MOUNTING HOLES. ALL MUST BE SCREWED IN ORDER TO CONFORM THE VIBRATION SPEC. C : KEEP THE DISTANCE MORE THAN 4mm BETWEEN POWER SUPPLY EDGE AND COSTOMER'S CHASSIS. D : FG IS FOR SAFETY GROUND CONNECTION. E : REMOTE ON/OFF CONTROL CONNECTOR (CN2, 53) : B2B-XH-AM (J.S.T.) MATCHING HOUSING : XHP-2 (J.S.T.) MATCHING TERMINAL : BXH-001T-P0.6 (J.S.T) OR SXH-001T-P0.6 (J.S.T.) *CN2 IS NORMALLY SHORTED BY JM-2W-96 (J.S.T.). F : CONNECTOR TO CHANGE V2, V3 OUTPUT VOLTAGE(CN71) : B4B-XH-AM (J.S.T.) J61 SHORT : V2 OUTPUT VOLTAGE IS +12V. (*) J61 OPEN : V2 OUTPUT VOLTAGE IS +15V. J71 SHORT : V3 OUTPUT VOLTAGE IS -12V. (*) J71 OPEN : V3 OUTPUT VOLTAGE IS -15V. *J61 AND J71 ARE NORMALLY SHORTED BY JM-2W-96(J.S.T.) 88 CONNECTORS USED: PART DESCRIPTION PART NAME PIN HEADER (INPUT SIDE CN1) B3P-5-VH PIN HEADER (OUTPUT SIDE CN51) B8P-VH PIN HEADER (OUTPUT SIDE CN61) B3P-VH PIN HEADER (OUTPUT SIDE CN81) B8P-VH MANUFACT. QTY J.S.T. 1 J.S.T. 1 J.S.T. 1 J.S.T. 1 *OUTPUT CURRENT OF EACH CONNECTOR PIN MUST BE LESS THAN 5A. MATCHING HOUSINGS & PINS (NOT INCLUDED WITH THE PRODUCT): PART DESCRIPTION SOCKET HOUSING (CN1) SOCKET HOUSING (CN51) SOCKET HOUSING (CN61) SOCKET HOUSING (CN81) TERMINAL PINS (CN1, 51, 61, 81) HAND CRIMPING TOOL : YC-160R PART NAME MANUFACT. QTY VHR-5N J.S.T. 1 VHR-8N J.S.T. 1 VHR-3N J.S.T. 1 VHR-6N J.S.T. 11 SVH-21T-P1.1 J.S.T. 20 MANUFACT : J.S.T.