DIODES ZXTP23015CFHTA

ZXTP23015CFH
15V, SOT23, PNP medium power transistor
Summary
V(BR)CES > -15V, V(BR)CEO > -15V
V(BR)ECO > -6V
IC(CONT) = -6A
RCE(SAT) = 20m⍀ typical
VCE(SAT) < -36mV @ -1A
PD = 1.25W
Complementary part number ZXTN23015CFH
Description
C
Advanced process capability and package design have been used to
maximize the power handling and performance of this small outline
transistor. The compact size and ratings of this device make it ideally
suited to applications where space is at a premium.
B
Feature
•
Higher power dissipation SOT23 package
•
High peak current
•
Low saturation voltage
•
15V forward blocking voltage
•
6V reverse blocking voltage
E
Applications
E
•
High side disconnect switches
•
DC - DC converters
•
MOSFET and IGBT gate driving
•
Motor drive
•
Relay, lamp, and solenoid drive
C
B
Pinout - top view
Ordering information
Device
ZXTP23015CFHTA
Reel size
(inches)
Tape width
Quantity per reel
7
8mm
3000
Device marking
317
Issue 2 - May 2007
© Zetex Semiconductors plc 2007
1
www.zetex.com
ZXTP23015CFH
Absolute maximum ratings
Parameter
Symbol
Limit
Unit
VCBO
-15
V
Collector-emitter voltage
V(BR)CES
-15
V
Collector-emitter voltage
VCEO
-15
V
Emitter-base voltage
VEBO
-7.0
V
Emitter-collector voltage
VECO
-6.0
V
ICM
-10
A
Continuous collector current (c)
IC
-5
A
Continuous collector current (d)
IC
-6
A
Base current
IB
-1.2
A
Power dissipation @ TA=25oC (a)
PD
0.73
5.84
W
mW/oC
PD
1.05
8.4
W
mW/oC
PD
1.25
9.6
W
mW/oC
PD
1.81
14.5
W
mW/oC
Tj:Tstg
-55 to
+150
Symbol
Value
Junction to ambient (a)
R⍜JA
171
o
Junction to ambient (b)
R⍜JA
119
o
Junction to ambient (c)
R⍜JA
100
o
Junction to ambient (d)
R⍜JA
69
o
Collector-base voltage
Peak pulse current
Linear derating factor (a)
Power dissipation @ TA=25oC (b)
Linear derating factor
(b)
Power dissipation @ TA=25oC (c)
Linear derating factor (c)
Power dissipation @ TA=25oC (d)
Linear derating factor (d)
Operating and storage temperature
o
C
Thermal resistance
Parameter
Unit
C/W
C/W
C/W
C/W
NOTES:
(a) For a device surface mounted on 15mm x 15mm x 1.6mm FR4 PCB with high coverage of single sided 1oz copper, in
still air conditions.
(b) Mounted on 25mm x 25mm x 1.6mm FR4 PCB with a high coverage of single sided 2 oz copper in still air conditions.
(c) Mounted on 50mm x 50mm x 1.6mm FR4 PCB with a high coverage of single sided 2 oz copper in still air conditions.
(d) As (c) above measured at t<5secs.
Issue 2 - May 2007
© Zetex Semiconductors plc 2007
2
www.zetex.com
ZXTP23015CFH
Characteristics
Issue 2 - May 2007
© Zetex Semiconductors plc 2007
3
www.zetex.com
ZXTP23015CFH
ELECTRICAL CHARACTERISTICS (at TAMB = 25°C unless otherwise stated)
Parameter
Min.
Typ.
Collector-base breakdown voltage V(BR)CBO
-15
-40
V
IC=-100␮A
Collector-emitter breakdown
voltage
V(BR)CES
-15
-40
V
IC =-100␮A
Collector-emitter breakdown
voltage
V(BR)CEO
-15
-25
V
IC=-10mA(*)
Emitter-base breakdown voltage
V(BR)EBO
-7.0
-8.2
V
IE=-100␮A
Emitter-collector breakdown
voltage
V(BR)ECO
-6.0
-8.5
V
IE=-100␮A
Collector-emitter cut-off current
ICES
-20
nA
VCE=-12V
Collector-base cut-off current
ICBO
-20
nA
VCB=-12V
Emitter-base cut-off current
IEBO
-10
nA
VEB=-6V
Static forward current transfer
ratio
HFE
Collector-emitter saturation
voltage
Base-emitter saturation voltage
Symbol
200
380
200
350
140
220
VCE(sat)
VBE(sat)
Max. Unit Conditions
IC=-10mA, VCE=-2V (*)
560
IC=-500mA, VCE=-2V
Ic=-6A, VCE=-2V
-6
-10
mV
IC=-100mA, IB=-10mA(*)
-27
-36
mV
IC=-1A, IB=-100mA(*)
-90
-120
mV
IC=-3A, IB=-60mA(*)
-140
-190
mV
IC=-6A, IB=-240mA(*)
-0.83 -0.93
V
IC=-3A, IB=-60mA(*)
-0.93 -1.03
V
IC=-6A, IB=-240mA(*)
-0.83 -0.93
V
IC=-6A, VCE=-2V(*)
Base-emitter turn-on voltage
VBE(on)
Transition frequency
fT
270
Output capacitance
Cobo
78.4
pF
VCB=-10V, f=1MHz
Delay time
t (d)
16
ns
Rise time
t (r)
13
ns
VCC=-5V, IC=-3A,
IB1=IB2=-150mA
Storage time
t (stg)
123
ns
Fall time
t (f)
9
ns
MHz Ic=-500mA, VCE=-2V,
f=50MHz
NOTES:
(*) Measured under pulsed conditions. Pulse width = 300␮S. Duty cycle ⱕ2%.
Issue 2 - May 2007
© Zetex Semiconductors plc 2007
4
www.zetex.com
ZXTP23015CFH
Typical characteristics
Issue 2 - May 2007
© Zetex Semiconductors plc 2007
5
www.zetex.com
ZXTP23015CFH
Intentionally left blank
Issue 2 - May 2007
© Zetex Semiconductors plc 2007
6
www.zetex.com
ZXTP23015CFH
Package outline - SOT23
E
e
e1
b
3 leads
L1
D
E1
A
A1
Dim.
L
c
Millimeters
Inches
Dim.
Millimeters
Min.
Max.
Min.
Max.
A
-
1.12
-
0.044
e1
A1
0.01
0.10
0.0004
0.004
E
2.10
2.64
0.083
0.104
b
0.30
0.50
0.012
0.020
E1
1.20
1.40
0.047
0.055
c
0.085
0.20
0.003
0.008
L
0.25
0.60
0.0098
0.0236
D
2.80
3.04
0.110
0.120
L1
0.45
0.62
0.018
0.024
-
-
-
-
-
e
0.95 NOM
Min.
0.037 NOM
Max.
Inches
1.90 NOM
Min.
Max.
0.075 NOM
Note: Controlling dimensions are in millimeters. Approximate dimensions are provided in inches
Issue 2 - May 2007
© Zetex Semiconductors plc 2007
7
www.zetex.com
ZXTP23015CFH
Definitions
Product change
Zetex Semiconductors reserves the right to alter, without notice, specifications, design, price or conditions of supply of any product or
service. Customers are solely responsible for obtaining the latest relevant information before placing orders.
Applications disclaimer
The circuits in this design/application note are offered as design ideas. It is the responsibility of the user to ensure that the circuit is fit for
the user’s application and meets with the user’s requirements. No representation or warranty is given and no liability whatsoever is
assumed by Zetex with respect to the accuracy or use of such information, or infringement of patents or other intellectual property rights
arising from such use or otherwise. Zetex does not assume any legal responsibility or will not be held legally liable (whether in contract,
tort (including negligence), breach of statutory duty, restriction or otherwise) for any damages, loss of profit, business, contract,
opportunity or consequential loss in the use of these circuit applications, under any circumstances.
Life support
Zetex products are specifically not authorized for use as critical components in life support devices or systems without the express written
approval of the Chief Executive Officer of Zetex Semiconductors plc. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body
or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to
cause the failure of the life support device or to affect its safety or effectiveness.
Reproduction
The product specifications contained in this publication are issued to provide outline information only which (unless agreed by the
company in writing) may not be used, applied or reproduced for any purpose or form part of any order or contract or be regarded as a
representation relating to the products or services concerned.
Terms and Conditions
All products are sold subjects to Zetex’ terms and conditions of sale, and this disclaimer (save in the event of a conflict between the two
when the terms of the contract shall prevail) according to region, supplied at the time of order acknowledgement.
For the latest information on technology, delivery terms and conditions and prices, please contact your nearest Zetex sales office.
Quality of product
Zetex is an ISO 9001 and TS16949 certified semiconductor manufacturer.
To ensure quality of service and products we strongly advise the purchase of parts directly from Zetex Semiconductors or one of our
regionally authorized distributors. For a complete listing of authorized distributors please visit: www.zetex.com/salesnetwork
Zetex Semiconductors does not warrant or accept any liability whatsoever in respect of any parts purchased through unauthorized sales channels.
ESD (Electrostatic discharge)
Semiconductor devices are susceptible to damage by ESD. Suitable precautions should be taken when handling and transporting devices.
The possible damage to devices depends on the circumstances of the handling and transporting, and the nature of the device. The extent
of damage can vary from immediate functional or parametric malfunction to degradation of function or performance in use over time.
Devices suspected of being affected should be replaced.
Green compliance
Zetex Semiconductors is committed to environmental excellence in all aspects of its operations which includes meeting or exceeding regulatory requirements with respect to the use of hazardous substances. Numerous successful programs have been implemented to reduce
the use of hazardous substances and/or emissions.
All Zetex components are compliant with the RoHS directive, and through this it is supporting its customers in their compliance with
WEEE and ELV directives.
Product status key:
“Preview”
Future device intended for production at some point. Samples may be available
“Active”
Product status recommended for new designs
“Last time buy (LTB)”
Device will be discontinued and last time buy period and delivery is in effect
“Not recommended for new designs” Device is still in production to support existing designs and production
“Obsolete”
Production has been discontinued
Datasheet status key:
“Draft version”
This term denotes a very early datasheet version and contains highly provisional information, which
may change in any manner without notice.
“Provisional version”
This term denotes a pre-release datasheet. It provides a clear indication of anticipated performance.
However, changes to the test conditions and specifications may occur, at any time and without notice.
“Issue”
This term denotes an issued datasheet containing finalized specifications. However, changes to
specifications may occur, at any time and without notice.
Zetex sales offices
Europe
Americas
Asia Pacific
Corporate Headquarters
Zetex GmbH
Kustermann-park
Balanstraße 59
D-81541 München
Germany
Telefon: (49) 89 45 49 49 0
Fax: (49) 89 45 49 49 49
[email protected]
Zetex Inc
700 Veterans Memorial Highway
Hauppauge, NY 11788
USA
Zetex (Asia Ltd)
3701-04 Metroplaza Tower 1
Hing Fong Road, Kwai Fong
Hong Kong
Zetex Semiconductors plc
Zetex Technology Park, Chadderton
Oldham, OL9 9LL
United Kingdom
Telephone: (1) 631 360 2222
Fax: (1) 631 360 8222
[email protected]
Telephone: (852) 26100 611
Fax: (852) 24250 494
[email protected]
Telephone: (44) 161 622 4444
Fax: (44) 161 622 4446
[email protected]
© 2007 Published by Zetex Semiconductors plc
Issue 2 - May 2007
© Zetex Semiconductors plc 2007
8
www.zetex.com