EPCOS B65659-F1-X1 Pm/p/p cores halves/ep/tt/pr core Datasheet

PM/P/P Cores Halves/EP/TT/PR Cores
Series/Type:
P 18 x 11
The following products presented in this data sheet are being withdrawn.
Ordering Code
Substitute Product
B65651D0000R026
B65652A50000000
B65659F0001X101
B65651D0000R048
B65659F0001X023
Date of
Withdrawal
2002-08-02
2004-10-18
2004-01-23
Deadline Last
Orders
2002-12-31
2005-03-31
Last Shipments
2003-03-31
2005-09-30
For further information please contact your nearest EPCOS sales office, which will also support
you in selecting a suitable substitute. The addresses of our worldwide sales network are
presented at www.epcos.com/sales.
P 18 × 11
Core
B65651
■ In accordance with IEC 60133
■ Pot cores are supplied in sets
Magnetic characteristics (per set)
with
without
center hole center hole
Σl/A
le
Ae
A min
Ve
0,6
25,9
43
—
1 120
mm–1
mm
mm2
mm2
mm3
0,57
26,6
46,7
33,9
1 240
Approx. weight (per set)
m
6,0
6,6
g
Gapped
Material
A L value
nH
µe
s
approx.
mm
Ordering code 1)
-D with center hole
-T w. threaded sleeve
40 ± 3 %
1,60
19
B65651-+40-A1
M33
100 ± 3 %
0,60
48
B65651-+100-A33
N48
160 ± 2 %
250 ± 3 %
315 ± 3 %
400 ± 3 %
500 ± 3 %
630 ± 5 %
0,32
0,20
0,15
0,10
0,07
0,05
77
120
151
192
240
302
B65651-+160-G48
B65651-+250-A48
B65651-+315-A48
B65651-+400-A48
B65651-+500-A48
B65651-D630-J48
K1
Ungapped
Material
A L value
µe
nH
AL1min P V
nH
W/set
Ordering code
-D with center hole
-W w/o center hole
N26
2900 + 30/– 20 % 1380
N30
5900 + 30/– 20 % 2680
B65651-W-R30
T38
12600 + 40/– 30 % 5710
B65651-W-Y38
N87
3600 + 30/– 20 % 1630 2000
B65651-D-R26
< 0,46
B65651-W-R87
(200 mT, 100 kHz, 100 °C)
1) Replace the + by the code letter ”D“ or ”T“ for the required version.
334 08/01
P 18 × 11
Accessories
B65652
Coil former
Standard:
Material:
Winding:
to IEC 60133 and DIN 41 294
GFR polyterephthalate (UL 94 V-0, insulation class to IEC 60085:
F max. operating temperature 155 °C), color code black
see “Processing Notes”, page 155
Insulating washer 1 between core and coil former
■ For tolerance compensation and for insulation
■ Polycarbonate spring washer (UL 94 V-0, insulation class to IEC 60085: E
120 °C), 0,04 mm thick
Insulating washer 2 between core and terminal carrier
■ For increased dielectric strength
■ Made of polycarbonate (UL 94 V-0, insulation class to IEC 60085: E
120 °C), 0,08 mm thick
Coil former
Bestellnummer
A R value
µΩ
Sections
AN
mm2
lN
mm
1
16
35,6
87
B65652-B-T1
2
13
35,6
94
B65652-B-T2
Insulating washer 1 (reel packing, PU = 1 reel)
B65652-A5000
Insulating washer 2 (bulk)
B65652-A5002
Coil former
0,4
ø7,7+0,1
0,5
7_ 0,1
ø8,7 _ 0,1
ø8,7 _ 0,1
2+0,6
14,8 _ 0,2
ø7,7+0,1
AN
0,5
7_ 0,1
FPK0274-7
Insulating washer 1
Insulating washer 2
335 08/01
P 18 × 11
Accessories
B65655
Mounting assembly for printed circuit boards
■ The set comprises a terminal carrier and a yoke
■ For snap-in connection
Terminal carrier
Material:
GFR polyterephthalate (UL 94 V-0, insulation class to IEC 60085:
F max. operating temperature 155 °C), color code gray
Solderability: to IEC 60068-2-20, test Ta, method 1 (aging 3): 235 °C, 2 s
Resistance to soldering heat: to IEC 60068-2-20, test Tb, method 1B: 350 °C, 3,5 s
Yoke
Spring yoke, made of tinned nickel silver (0,3 mm), with ground terminal
Complete mounting assembly
(4 solder terminals)
Ordering code: B65655-B9
Complete mounting assembly
(8 solder terminals)
Ordering code: B65655-B10
4 solder terminals
8 solder terminals
Ground
Erdungspunkt
Ground
8
19,9 max.
1
8
5
1
5
4
4
19,9 max.
Erdungspunkt
*)
20 max.
*)
20 max.
a
b
13,5 max.
13,5 max.
a
Hole arrangement
View in mounting
direction
c
Hole arrangement
View in mounting
direction
20,7 max.
*)
a)
b)
c)
Ground
Erdungspunkt
ø1,3+0,1
ø1,3+0,1
3,5
3,5
Ground
Erdungspunkt
2,54
FPK0295-U
20,7 max.
2,54
This recess must be on the side of the grounding pin to ensure that the yoke locks in position.
Yoke
Terminal carrier with 4 solder terminals
Terminal carrier with 8 solder terminals
336 08/01
FPK0296-3
P 18 × 11
B63399
Accessories
B65659
Adjusting screw
■ Tube core with thread and core brake made of GFR polyterephthalate
Plastic adjusting screwdriver (not shown)
Plastic handle for adjusting screwdriver (not shown)
Core P 18 × 11
Material
Adjusting screw
Tube core
AL value Fig. ∅ × length
nH
mm
Min.
adjusting
range
Material Color
code
Ordering code
%
40
a
2,62 × 3,6
Si 1
white
13
B65659-F1-X101
M 33
100
a
2,62 × 3,6
Si 1
white
10
B65659-F1-X101
N 48
160
a
2,62 × 3,6
Si 1
white
7
250
a
2,62 × 3,6
K1
green
10
B65659-F1-X1
315
400
b
2,75 × 4,4
N 22
black
16
12
B65659-F3-X23
400
500
c
2,82 × 4,4
N 22
yellow
16
13
B65659-F4-X23
K1
B65659-F1-X101
Adjusting screwdriver
B63399-B4
Handle
B63399-B5
Adjusting screw
a
b
c
337 08/01
Herausgegeben von EPCOS AG
Marketing Kommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND
 EPCOS AG 2000. Alle Rechte vorbehalten. Vervielfältigung, Veröffentlichung, Verbreitung und
Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG
nicht gestattet.
Mit den Angaben in dieser Broschüre werden die Bauelemente spezifiziert, keine Eigenschaften
zugesichert. Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen
für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird.
Diese Broschüre ersetzt die vorige Ausgabe.
Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgelegenen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland.
Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskünfte
darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsgesellschaft einzuholen.
Published by EPCOS AG
Marketing Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY
 EPCOS AG 2000. All Rights Reserved. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited.
The information contained in this brochure describes the type of component and shall not be considered as guaranteed characteristics. Purchase orders are subject to the General Conditions for
the Supply of Products and Services of the Electrical and Electronics Industry recommended by the
ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed.
This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
1
Similar pages