PRODUCT DATASHEET CARMEN series last update 7/2/2017 DETAILS Product Number CP15774_CARMEN-S-C Family CARMEN Type Assembly Color black Diameter 69,5 mm Height 41,5 mm Style round Optic Material PMMA Holder Material Fastening socket Status production ready ROHS Comliant Yes Date Updated 7/02/2017 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency cd/lm CLL02x/CLU02x (LES10) sim: 14,1 Spot - sim: 8.210 LEDiL: F15255_HEKLA-SOCKET-C CLU700/701 sim: 10,4 Spot - sim: 15.700 LEDiL: F15255_HEKLA-SOCKET-C CXA/B 15xx sim: 12,9 Spot - sim: 9.460 LEDiL: F15256_HEKLA-SOCKET-D COB T-Type sim: 11 Spot sim: 78 % sim: 12.740 LEDiL: F15848_HEKLA-SOCKET-G MJT COB LES 6 9 deg Spot 76 % 13.100 LEDiL: F15255_HEKLA-SOCKET-C MJT COB LES 9.8 15 deg Spot 72 % 5.900 LEDiL: F15255_HEKLA-SOCKET-C SLE G6 LES10 sim: 14 Spot sim: 73 % sim: 8.100 LEDiL: F15255_HEKLA-SOCKET-C Connector May 25th 2017 7:33 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10 24240 SALO, Finland http://www.ledil.com email: [email protected] FAX: +358-2-733 8001 A B C E F G H D 4 41.5 4 69.5 1 3 3 3 2 2 2 INDEX PART NO 1 2 3 Carmen-Lens Hekla C15732 Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: Up to 30mm class M, otherwise class C. According to DIN ISO 2768-2 Form and position: class L THIRD ANGLE PROJECTION: 1 This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy. G MATERIAL COLOUR HEKLA-SOCKET CARMEN-HLD-C PMMA PBT PC Clear White black Ledil Oy Salorankatu 10 FIN 24240 SALO Finland DRAWING TITLE Carmen-B_Datasheet SIZE 1 PART NUMBER A3 SCALE H DESCRIPTION 1:1 WEIGHT SHEET B A 1/1 NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value. GENERAL INFORMATION - Product series especially designed & optimized for series of LEDs. - Special care taken to make light distribution as uniform as possible. Note! Due to use of high power COB's with this product, special attention to proper thermal design is highly recommended. LEDiL has no liability for direct, indirect or consecutive damages arising from the LEDiL products being used outside of the recommended temperature range.