Pan Jit ER3A-AU BX 00001 Surface mount rectifier Datasheet

ER3A-AU~ER3J-AU
SURFACE MOUNT RECTIFIER
VOLTAGE
50 to 600 Volts
CURRENT
3 Amperes
FEATURES
• Glass passivated junction
• Easy pick and place
0.108(2.75)
0.128(3.25)
• High temperature metallurgically bonded-no compression
contacts as found in other diode-constructed rectifiers
0.245(6.22)
0.220(5.59)
• For surface mounted applications
• Plastic package has Underwriters Laboratory Flammability
Classification 94V-O
0.280(7.11)
0.260(6.60)
• Acqire quality system certificate : TS16949
• AEC-Q101 qualified
0.012(0.305)
0.006(0.152)
0.103(2.62)
0.079(2.00)
• Lead free in comply with EU RoHS 2002/95/EC directives
• Green molding compound as per IEC61249 Std. . (Halogen Free)
MECHANICAL DATA
0.050(1.27)
0.030(0.76)
• Case: JEDEC DO-214AB molded plastic
• Terminals: Solder plated, solderable per MIL-STD-750, Method 2026
0.008(0.203)
0.002(0.051)
0.320(8.13)
0.305(7.75)
• Polarity: Indicated by cathode band
• Standard packaging: 16mm tape (EIA-481)
• Weight: 0.0082 ounce, 0.2325 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
PA RA ME TE R
S YMB OL E R3A -A U E R3 B -A U E R3 C -A U E R3D -A U E R3 E -A U E R3 G-A U E R3 J-A U UNITS
Ma xi mum R e current P e ak R e ve rs e Vo lta ge
V RRM
50
10 0
15 0
2 00
30 0
4 00
6 00
V
Ma xi mum R MS Vo ltag e
V RMS
35
70
10 5
14 0
21 0
28 0
42 0
V
Ma xi mum D C B lo ck i ng Vo lta ge
V DC
50
10 0
15 0
2 00
30 0
4 00
6 00
V
Ma xi mum A ve rag e F orward C urrent a t T L =7 5 O C
IF (AV )
3
A
P e ak F o rwa rd S urg e C urre nt : 8 .3ms s i ng le ha lf s i ne -wave
supe ri mp os ed on ra te d loa d ( JE D E C metho d)
I FS M
10 0
A
Ma xi mum F o rward Voltag e at 3 A
VF
Ma xi mum D C Reve rse C urrent a t Ra ted D C B loc ki ng
Vo lta ge
T J =2 5 O C
T J =1 00 O C
0 .95
1.25
1 .7
V
IR
1
2 00
μA
Ma xi mum R e vers e R e co ve ry Ti me ( No te s 1 )
t rr
35
ns
Typi ca l J uncti o n C a p a ci tance (No te s 2 )
CJ
45
pF
Typi ca l The rmal Res i stanc e (No te s 3 )
R θJL
16
T J ,T S TG
-55 to + 1 50
Op erati ng a nd S torag e Temp era ture Ra nge
O
C /
W
O
C
NOTES:1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, Irr=0.25A
2. Measured at 1 MHz and applied Vr = 4.0 volts.
3. 8.0 mm2 ( .013mm thick ) land areas.
October 23,2012-REV.06
PAGE . 1
ER3A-AU~ER3J-AU
October 23,2012-REV.06
PAGE . 2
ER3A-AU~ER3J-AU
MOUNTING PAD LAYOUT
ORDER INFORMATION
• Packing information
T/R - 3K per 13" plastic Reel
T/R - 0.5K per 7" plastic Reel
October 23,2012-REV.06
PAGE . 3
ER3A-AU~ER3J-AU
Part No_packing code_Version
ER3A-AU_R1_000A1
ER3A-AU_R1_100A1
ER3A-AU_R2_000A1
ER3A-AU_R2_100A1
For example :
RB500V-40_R2_00001
Serial number
Version code means HF
Packing size code means 13"
Part No.
Packing type means T/R
Packing Code XX
Packing type
Tape and Ammunition Box
(T/B)
Tape and Reel
(T/R)
Bulk Packing
(B/P)
Tube Packing
(T/P)
Tape and Reel (Right Oriented)
(TRR)
Tape and Reel (Left Oriented)
(TRL)
FORMING
October 23,2012-REV.06
Version Code XXXXX
1st Code
Packing size code
A
N/A
0
HF
0
serial number
R
7"
1
RoHS
1
serial number
B
13"
2
T
26mm
X
S
52mm
Y
L
F
PANASERT T/B CATHODE UP
(PBCU)
PANASERT T/B CATHODE DOWN
(PBCD)
2nd Code HF or RoHS 1st Code 2nd~5th Code
U
D
PAGE . 4
ER3A-AU~ER3J-AU
Disclaimer
•Reproducing and modifying information of the document is prohibited without permission
from Panjit International Inc..
•Panjit International Inc. reserves the rights to make changes of the content herein the
document anytime without notification. Please refer to our website for the latest
document.
•Panjit International Inc. disclaims any and all liability arising out of the application or use of
any product including damages incidentally and consequentially occurred.
•Panjit International Inc. does not assume any and all implied warranties, including warranties
of fitness for particular purpose, non-infringement and merchantability.
•Applications shown on the herein document are examples of standard use and operation.
Customers are responsible in comprehending the suitable use in particular applications.
Panjit International Inc. makes no representation or warranty that such applications will be
suitable for the specified use without further testing or modification.
• The products shown herein are not designed and authorized for equipments requiring high
level of reliability or relating to human life and for any applications concerning life-saving
or life-sustaining, such as medical instruments, transportation equipment, aerospace
machinery et cetera. Customers using or selling these products for use in such applications
do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages
resulting from such improper use or sale.
•Since Panjit uses lot number as the tracking base, please provide the lot number for tracking
when complaining.
October 23,2012-REV.06
PAGE . 5
Similar pages