Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to [email protected]. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. FAN8831 Sinusoidal Piezoelectric Actuator Driver with Step-Up DC-DC Converter Features Description Step-Up DC-DC Converter Integrated Step-up Power Switch up to 36 V The FAN8831 is a single-chip piezoelectric actuator driver consisting of step-up DC-DC converter with integrated 36 V boost switch and a full-bridge output stage. The device is capable of driving a Piezo bidirectionally at 120 V peak-to-peak from a single 3 V lithium cell. The step-up DC-DC converter operates in Critical Conduction Mode (CRM) and is optimized to work in a coupled inductor configuration to provide output voltages in excess of 60 V. Over-voltage protection, over-current protection and thermal shutdown are all provided. An internal ready is used to enable the full-bridge gate driver when step-up DC-DC converter output voltage reaches the proper level with hysteresis. Wide Operating Voltage Range of 2.7 to 5.5 V Adjustable Step-up Output Voltage Adjustable Step-up Current Limit Zero Current Detector (ZCD) Internal Soft-Start Built-in Protection Circuit - Over Voltage Protection (OVP) Thermal Shutdown (TSD) Piezo Actuator Driver Integrated Full-Bridge Switches (VDS=75 V) Digitally Implemented Sine Modulator Package Information Small 4.0 mm × 4.0 mm MLP The boost voltage is set using external resistors, and step-up current limit is programmable via the external resistor at OCP pin. The output H-bridge features four integrated 75 V P and N-channel for sine wave drive of the Piezo actuator. Applications Piezo Actuator Ordering Information Part Number Operating Temperature Range Package Packing Method FAN8831MPX -40°C to +125°C 24-Lead, MLP Tape & Reel © 2014 Fairchild Semiconductor Corporation FAN8831 • Rev. 1.0 www.fairchildsemi.com FAN8831 — Sinusoidal Piezoelectric Actuator Drive with Step-Up DC-DC Converter December 2014 VDRV N1 N2 2.7 V ~5.5 V PGND1 PGND1 VDD SGND ZCD FB COMP LX LX OCP NC FO FO FAN8831 EN EN OUT1 M INPUT INPUT OUT2 VDRV VIN AGND OVP RT Figure 1. NC PGND2 ADJ Typical Application Circuit for Piezo Actuator Driver Internal Block Diagram VDRV INPUT SINA IAJD ADJ VDRV UP/DN DAC CLOCK AGND SINA PWM_A SINB PWM_B CONTROL LOGIC OUT1 VREF OUT2 SINB SINE GENERATOR OSCILLATOR RT PGND2 VREF VDD ENABLE VOLTAGE MONITOR AND LOGIC EN SGND FO OVP_FB VREADY FAULT [tFO=20us] OVP TSD READY VOLTAGE REGULATOR 5V LDO VREF ZCD CLAMP TIMER LX COMP S Q VZCD DRIVER FB ZCD VIN PWM OVP_FB R VOVP_FB OVP OVP RAMP GENERATOR TSD CURRENT LIMIT PGND1 VOVP_OVP TSD Figure 2. © 2014 Fairchild Semiconductor Corporation FAN8831 • Rev. 1.0 RLIMIT OCP Functional Block Diagram www.fairchildsemi.com 2 FAN8831 — Piezoelectric Actuator Driver with Step-Up DC-DC Converter Application Diagram FAN8831 — Piezoelectric Actuator Driver with Step-Up DC-DC Converter Pin Configuration PGND1 PGND1 VDD SGND ZCD FB COMP LX OCP LX FO NC FAN8831 EN OUT1 INPUT OUT2 VDRV VIN AGND OVP RT Figure 3. PGND2 ADJ NC Pin Assignments Pin Definitions Pin # Name 1,2 PGND1 3 VDD 4 SGND 5 ZCD 6 FB 7 COMP 8 OCP 9 FO Fault Output. 10 EN Enable pin to turn on and off the overall system. (Active Low Shutdown Mode). 11 INPUT 12 13 Description Power Ground 1. It is connected to the source of the step-up switch. Power supply of step-up DC-DC converter. Signal Ground. The signal ground for step-up DC-DC converter circuitry. The input of the zero current detection. Step-up DC-DC converter output voltage feedback input. Output of the transconductance error amplifier. Sets Step-up DC-DC converter current limit. Logic input for sinusoidal waveform. ADJ Output voltage adjust control pin. Connect to internal current source to change output voltage using an external resistor. Connect a small capacitor (1 nF). RT Oscillator frequency control pin. 14 OVP 15 AGND 16 VIN Voltage sense input of Step-up DC-DC converter for Over-Voltage Protection. Analog Ground. The signal ground for full-bridge driver circuitry. Power supply of 5 V LDO. 17 VDRV 18 PGND2 Power supply of full-bridge driver. 19 NC 20 OUT2 Output 2 for full-bridge driver. 21 OUT1 Output 1 for full-bridge driver. 22 NC Not Connected 23, 24 LX Switch Node. This pin is connected to the inductor. Power Ground 2. The power ground for full-bridge driver . Not Connected © 2014 Fairchild Semiconductor Corporation FAN8831 • Rev. 1.0 www.fairchildsemi.com 3 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Parameter Min. VDRV DC Link Input Voltage Drain-Source Voltage of each MOSFET VDD DC Supply Voltage for DC-DC Converter VIN,DCDC EN, INPUT, FB and COMP to SGND VIN DC Supply Voltage for LDO VLX LX to PGND Max. Unit 75 V -0.3 5.5 V -0.3 VDD +0.3 V -0.3 75 V 36 V -0.3 (2) 1S0P with thermal vias (3) 0.98 1S2P with thermal vias (4) 2.9 1S0P with thermal vias (3) 127 1S2P with thermal vias (4) 43 PD Power Dissipation θJA Thermal Resistance Junction-Air TA Operating Ambient Temperature Range -40 125 °C TJ Operating Junction Temperature -55 150 °C TSTG Storage Temperature Range -55 150 °C ESD Electrostatic Discharge Human Body Model, JESD22-A114 Capability Charged Device Model, JESD22-C101 2 KV 500 V (2) W °C/W Notes: 1. All voltage values, except differential voltages, are given with respect to SGND, AGND and PGND pin. 2. JEDEC standard: JESD51-2, JESD51-3. Mounted on 76.2×114.3×1.6mm PCB (FR-4 glass epoxy material). 3. 1S0P with thermal vias: one signal layer with zero power plane and thermal vias. 4. 1S2P with thermal vias: one signal layer with two power plane and thermal vias. Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Symbol Parameter Min. VDRV Supply Voltage for Full-Bridge Driver 30 VLX Boost Switch Voltage 10 Typ. 3.0 Max. Unit 60 V 30 V 3.3 V VDD Operating Voltage for DC-DC Converter 2.7 VIN Operating Voltage for Voltage Regulator 10 60 V Current Limit Control Resistor 7.0 150 kΩ ROCP © 2014 Fairchild Semiconductor Corporation FAN8831 • Rev. 1.0 www.fairchildsemi.com 4 FAN8831 — Piezoelectric Actuator Driver with Step-Up DC-DC Converter Absolute Maximum Ratings VDD=3.0 V, VIN=15.0 V, VDRV=60 V, RT=70 K and TA=-40°C to +125°C. Typical values TA=25°C, unless otherwise specified. Symbol Parameter Conditions Min. Typ. Max. Unit Power Supply Section (5) IQ,DD Quiescent Current for VDD I Q,IN Quiescent Current for VIN I Q,DRV Quiescent Current for VDRV ISD,DD Shutdown Current for VDD ISD,IN ISD,DRV VEN=VCOMP=VDD, VFB=1.0 V Device not switching 700 1200 µA 300 500 µA 200 300 µA 1 µA VEN=0 V, VDD=VIN=VDRV =3 V Shutdown Current for VIN Shutdown Current for VDRV 1 µA 5 10 µA VDDSTART Start Threshold Voltage 2.6 2.7 2.8 V VDDUVHYS VDD UVLO Hysteresis Voltage 0.1 0.2 0.3 V 0.99 1.0 1.01 V 1 µA 1.5 %/V Error Amplifier Section VFB Feedback Reference Voltage IFB FB pin Bias Current VFB1 Gm TA=25°C VFB=0 V ~ 2 V Feedback Voltage Line Regulation (6) Transconductance 2.7 V < VDD < 5 V 0.5 TA=25°C 800 µmho Zero Current Detect Section VZCD Input Voltage Threshold (7) 1.65 VCLAMPH Input High Clamp Voltage IDET=2.3 mA VCLAMPL Input Low Clamp Voltage IDET= -2.3 mA IZCD,SR Source Current Capability IZCD,SK Sink Current Capability tZCD,D Delay From ZCD to Output Turn-On 1.83 2.00 V 3.0 3.5 4.0 V -0.30 0.12 0.50 V -2.3 mA 2.3 mA 50 200 ns 25 35 µs (7) Maximum On-Time Section tON,MAX Maximum On-Time 15 Restart / Maximum Switching Frequency Limit Section tRST Restart Timer fMAX Maximum Switching Frequency 15 25 35 µs 900 1000 KHz 16 28 40 ms ROCP=3.3 KΩ, VDD=3.3 V 1.85 2.00 2.15 A ROCP=22 KΩ,VDD=3.3 V 0.9 1.0 1.1 A 80 130 180 ns (7) Soft-Start Timer Section tSS Internal Soft-Start Current Limit Comparator Section IOCP tCS_BLANK OCP Trip Current Comparator Leading-Edge Blanking Time (7) Notes: 5. This is the VDD current consumed when active but not switching. Does not include gate-drive current 6. 7. VOUT 1 VIN VOUT The line regulation is calculated based on This parameter, although guaranteed by design, is not tested in production. © 2014 Fairchild Semiconductor Corporation FAN8831 • Rev. 1.0 www.fairchildsemi.com 5 FAN8831 — Piezoelectric Actuator Driver with Step-Up DC-DC Converter Electrical Characteristics VDD=3.0 V, VIN=15.0 V, VDRV=60 V, RT=70 K and TA=-40°C to +125°C. Typical values TA=25°C, unless otherwise specified. Symbol Parameter Conditions Min. Typ. Max. Unit 0.2 0.5 Ω 1.0 µA Step-Up Switch Section RDSON N-Channel On Resistance VDD=3.3 V, TA=25°C ILK_LX LX Leakage Current VLX=36 V Oscillator Section fOSC Operating Frequency RT=58 KΩ 40 50 60 KHz RT=121 KΩ 20 25 30 KHz Logic (EN and INPUT) Section VINPUT+ INPUT Logic High Threshold Voltage VINPUT- INPUT Logic Low Threshold Voltage 1.34 IINPUT- Input Low Current for INPUT and EN VEN=0 V IINPUT+ Input High Current for INPUT and EN VEN=VDD RINPUT Input Logic Pull-Down Resistance VEN= VINPUT=3 V fINPUT (8) Input Logic Operating Frequency 8 V 0.5 V 1 µA 12 16 µA 250 375 KΩ 1000 Hz 20 Full-Bridge Switch Section RDS,ONP Output Upper-Side On Resistance TA=25°C 3.0 5.0 Ω RDS,ONN Output Low-Side On Resistance TA=25°C 3.0 5.0 Ω VDRV=100% of Target 1.0 V 0.1 V Output Control Section VADJ,MAX Analog Output Control Maximum Voltage VADJ,MIN Analog Output Control Minimum Voltage IADJ+ Internal Current Source for ADJ Pin (8) (8) TA=25°C 9 10 11 µA 0.75 0.80 0.85 V Protection (Ready, OVP and TSD) VREADY Output Ready Threshold Voltage HYREADY Output Ready Hysteresis 0.2 VOVP_FB OVP Threshold Voltage at FB Pin HYOVP_FB OVP Hysteresis Voltage at FB Pin VOVP_OVP OVP Threshold Voltage at OVP Pin 1.05 1.10 1.10 1.15 V 1.15 0.1 HYOVP_OVP OVP Hysteresis Voltage at OVP Pin (8) V V 1.20 V 0.15 V TSD Thermal Shutdown Temperature 150 °C THYS Hysteresis Temperature of TSD 50 °C TFO Fault Output Duration 20 30 µs VFOL Fault Output Low Level Voltage 0.1 0.4 V (8) RPU=50 KΩ, VPU=3 V Note: 8. This parameter, although guaranteed by design, is not tested in production. © 2014 Fairchild Semiconductor Corporation FAN8831 • Rev. 1.0 www.fairchildsemi.com 6 FAN8831 — Piezoelectric Actuator Driver with Step-Up DC-DC Converter Electrical Characteristics 1.06 5 1.04 4 1.02 3 ISD [mA] VFB [V] 1.00 0.98 2 ISDVIN 0.96 ISDVDRV 1 0.94 0.92 0 -40 -30 -15 0 25 50 75 85 100 125 -40 -30 -15 Temperature[oC] Figure 4. 0 25 50 75 85 100 125 Temperature [oC] Reference Voltage vs. Temperature Figure 5. 3.0 Shutdown Current for VDRV & VIN vs. Temperature 12 11 10 9 IADJ [mA] VVDD,UVLO [V] 2.8 2.6 VDD_START 2.4 8 7 6 VDD_STOP 2.2 5 -40 -30 -15 0 25 50 75 85 100 125 -40 -30 -15 Figure 6. 0 25 50 75 85 100 125 Temperature[oC] Temperature [oC] VDD UVLO vs. Temperature Figure 7. ADJ Current vs. Temperature 2.2 1000 IQIN IQDRV IQDD 800 2.0 IOCP [A] IQCURRENT [mA] 1.8 600 400 1.6 ROCP=3.3k 1.4 ROCP=25.5k FAN8831 — Piezoelectric Actuator Driver with Step-Up DC-DC Converter Typical Performance Characteristics 1.2 200 1.0 0 0.8 -40 -30 -15 0 25 50 75 85 100 125 -40 -30 -15 Temperature [oC] Figure 8. 0 25 50 75 85 100 125 Temperature [oC] Quiescent Current for VDD, VDRV, & VIN vs. Temperature Figure 9. OCP Current vs. Temperature 4.0 1800 1600 1400 1000 VCLAMPH VZCD [V] IOPR [mA] 3.0 IDD IIN IDRV 1200 800 600 2.0 VCLAMPL 1.0 400 200 0 0.0 -40 -30 -15 0 25 50 75 85 100 125 -40 -30 Temperature [oC] Figure 10. 0 25 50 75 85 100 125 Temperature [oC] Operating Current for VDD, VDRV, & VIN vs. Temperature © 2014 Fairchild Semiconductor Corporation FAN8831 • Rev. 1.0 -15 Figure 11. ZDC Clamp Voltage vs. Temperature www.fairchildsemi.com 7 1.2 35 33 31 29 1.1 VOVP_FB [V] T ONMAX [ms] 27 25 23 21 19 VOVPH_FB VOVPL_FB 1.0 17 15 0.9 -40 -30 -15 0 25 50 75 85 100 125 -40 -30 -15 0 Temperature[oC] Figure 12. 25 50 75 85 100 125 Temperature [oC] Maximum On-Time vs. Temperature Figure 13. Fist OVP (FB) vs. Temperature 1.4 35 33 1.3 31 1.2 27 VOVP_OVP [V] T RESRART [ms] 29 25 23 21 19 1.1 1.0 VOVPH_OVP 0.9 17 VOVPL_OVP 15 0.8 -40 -30 -15 0 25 50 75 85 100 125 -40 -30 -15 0 Temperature[oC] Restart-Time vs. Temperature Figure 15. 40 1.0 35 0.8 30 0.6 25 20 15 75 85 100 125 Second (OVP) vs. Temperature VREADYH 0.4 VREADYL 0.2 0.0 -40 -30 -15 0 25 50 75 85 100 125 -40 -30 -15 0 Temperature[oC] Figure 16. 25 50 75 85 100 125 Temperature [oC] Soft-Start Time vs. Temperature Figure 17. 1.4 1.4 1.2 1.2 1.0 1.0 VIN [V] VEN [V] 50 Temperature [oC] VOVP_OVP [V] T SOFT [ms] Figure 14. 25 FAN8831 — Piezoelectric Actuator Driver with Step-Up DC-DC Converter Typical Performance Characteristics 0.8 VEN+ 0.6 Ready Voltage vs. Temperature VIN+ VIN- 0.8 0.6 VEN0.4 0.4 -40 -30 -15 0 25 50 75 85 100 125 -40 -30 -15 Temperature [oC] Figure 18. 25 50 75 85 100 125 Temperature [oC] Enable (EN) Threshold Voltage vs. Temperature © 2014 Fairchild Semiconductor Corporation FAN8831 • Rev. 1.0 0 Figure 19. INPUT Threshold Voltage vs. Temperature www.fairchildsemi.com 8 0.5 % of Target Voltage [% ] 100 0.4 RDSON [] 0.3 0.2 0.1 80 60 40 20 0 0.0 -40 -30 -15 0 25 50 75 85 100 10 125 20 30 40 Figure 20. 50 60 70 80 90 100 110 120 130 140 150 RADJ [K] Temperature [oC] Boost Switch RDSON vs. Temperature Figure 21. 5.5 % of Sine Amplitude vs. RADJ 300 5.0 250 4.5 VDD=2.7 V 200 3.5 fOSC [kHz] RDSON [] 4.0 3.0 2.5 2.0 RDSONN 1.5 RDSONP VDD=3 V VDD=5 V 150 100 50 0 1.0 -40 -30 -15 0 25 50 75 85 100 5 125 15 25 35 45 55 65 75 85 95 105 115 125 135 145 155 RT [k] Temperature [oC] Full-Bridge Switch RDSON vs. Temperature 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 Figure 23. VDD=2.7 V VDD=3 V VDD=5 V fOSC vs. RT 3 5 7.5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 IOCP [A] Figure 22. FAN8831 — Piezoelectric Actuator Driver with Step-Up DC-DC Converter Typical Performance Characteristics ROCP [k] Figure 24. © 2014 Fairchild Semiconductor Corporation FAN8831 • Rev. 1.0 IOCP vs. ROCP www.fairchildsemi.com 9 4.00 2.80 18 0.05 C 4.00 13 A B 2X 19 12 4.00 2.80 4.00 24 7 0.80 PIN 1 QUADRANT 0.05 C 2X TOP VIEW 1 6 0.30 24X RECOMMENDED LAND PATTERN 0.10 C 0.08 C SIDE VIEW C SEATING PLANE BOTTOM VIEW PIN ONE OPTIONS PIN #1 IDENT (0.635) 4X 1 6 NOTES: 24 7 A. CONFORMS TO JEDEC REGISTRATION MO-220, VARIATION WGGD-6. B. DIMENSIONS ARE IN MILLIMETERS. C. DIMENSIONS AND TOLERANCES PER ASME Y14.5M, 2009. 19 (0.650) 4X 12 (0.495) 4X 18 0.50 E. DRAWING FILENAME: MKT-MLP24Erev5. 13 0.10 0.05 BOTTOM VIEW D. LAND PATTERN IPC REFERENCE : QFN50P400X400X80-25W6N. 24X C A B C 0.20 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] Semiconductor Components Industries, LLC N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com