Wall DTEM10702D 100 - 240vac input voltage range 60 - 72 watts, single output Datasheet

DATASHEET
Rev. C
DTEM1070 SERIES
100~240VAC Input Voltage Range
60~72 Watts, Single Outputs
IEC-320-C14, C8, and C6 AC Inlet Types
AC/DC Medical Desktop Power Supplies
IEC-320-C14
IEC-320-C8
IEC-320-C6
FEATURES
 Single Outputs
 100~240VAC Input Voltage Range
 CEC / Energy Star Level V Compliant
 IEC-320-C14, IEC-320-C8, and IEC-320-C6 AC Inlet
 RoHS Compliant
Connectors Available
 Short Circuit and Over Voltage Protection
 MTBF: > 30,000 Hours
 UL/cUL 60601-1 (3rd edition), TUV/RH EN/IEC 60601-1,
CB, CE, and FCC Safety Approvals
 Dimensions: 5.20” x 2.13” x 1.22”
 Optional Output Connectors Available
DESCRIPTION
The DTEM1070 series of AC/DC medical desktop power supplies provides up to 72 Watts of continuous output
power. All models have a single output and a wide input voltage range of 100~240VAC. All models are protected
against over voltage and short circuit conditions. This series is RoHS and CEC/Energy Star Level V compliant
and has UL/cUL 60601-1 (3rd edition), TUV/RH EN/IEC 60601-1, CB, CE, and FCC safety approvals. This series
also has three AC inlet connector types available: IEC-320-C14, IEC-320-C8, and IEC-320-C6. Optional output
connectors are also available. Please call factory for ordering details.
02/07/2013
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
Page 1 of 4
DTEM1070 Series
C14 and C6 Inlet Types
60~72 Watts, Single Outputs
AC/DC Medical Desktop Power Supplies
Rev. C
SPECIFICATIONS: DTEM1070 Series
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
INPUT SPECIFICATIONS
Input Voltage Range
Input Frequency
Input Current
Inrush Current
OUTPUT SPECIFICATIONS
Output Current
Output Voltage (See Note 2)
Line Regulation
TEST CONDITIONS
Min
100
50
Line regulation is defined by changing
±10% of input voltage from nominal line
and rated load.
Unit
240
60
2
90
VAC
Hz
A
A
-1
+1
%
-5
+5
See Table
%
Measured at nominal line and full load
with 20MHz limited bandwidth and 0.1µF
ceramic and 47µF aluminum capacitors in
parallel on the output.
Hold-up Time
Turn-on Time
PROTECTION
Over Voltage Protection
Short Circuit Protection
GENERAL SPECIFICATIONS
Efficiency (typical)
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
Storage Temperature
Storage Humidity
MTBF
PHYSICAL SPECIFICATIONS
Dimensions (L x W x H)
AC Inlet Connector (See Note 1)
Weight
SAFETY & COMPLIANCE
Safety Standards
Compliance
02/07/2013
Max
See Table
See Table
Load Regulation
Output Power
Ripple & Noise
Typ
250
mVp-p
8.3
3
ms
s
Latch off
Automatic recovery
85
0
-20
5
40
85
95
> 30,000 hours
%
°C
°C
%
5.20 x 2.13 x 1.22 inches (132 x 54 x 31 mm)
IEC-320-C14, IEC-320-C8, IEC-320-C6
11.3oz (320g)
UL/cUL 60601-1 (3rd edition), TUV/RH EN/IEC 60601-1, FCC, CB, CE
RoHS, WEEE, CEC/Energy Star Level V
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
Page 2 of 4
DTEM1070 Series
C14 and C6 Inlet Types
60~72 Watts, Single Outputs
AC/DC Medical Desktop Power Supplies
Rev. C
MODEL SELECTION TABLE
Input Voltage
Range
Output Current
Ripple & Noise (3)
Maximum
Output Power
6A
250mVp-p
72W
0A
4A
250mVp-p
72W
0A
5A
250mVp-p
60W
18 ~ 24 VDC
0A
3.33A
250mVp-p
60W
DTEM10702A
12 ~ 17 VDC
0A
6A
250mVp-p
72W
DTEM10702B
18 ~ 24 VDC
0A
4A
250mVp-p
72W
12 ~ 17 VDC
0A
5A
250mVp-p
60W
18 ~ 24 VDC
0A
3.33A
250mVp-p
60W
Model Number (1)
Output Voltage (2)
Min
Max
12 ~ 17 VDC
0A
18 ~ 24 VDC
12 ~ 17 VDC
DTEM10701D
DTEM10701A
DTEM10701B
DTEM10701C
DTEM10702C
100 ~ 240 VAC
100 ~ 240 VAC
DTEM10702D
DTEM10703A
12 ~ 17 VDC
0A
6A
250mVp-p
72W
DTEM10703B
18 ~ 24 VDC
0A
4A
250mVp-p
72W
12 ~ 17 VDC
0A
5A
250mVp-p
60W
18 ~ 24 VDC
0A
3.33A
250mVp-p
60W
DTEM10703C
100 ~ 240 VAC
DTEM10703D
AC Inlet Type
IEC-320-C14
IEC-320-C8
IEC-320-C6
NOTES
1. The number in red represents the type of AC inlet: “1” is for IEC-320-C14 type, “2” is for IEC-320-C8 type, and “3” is for IEC-320-C6 type.
2. The output voltage is specified as a range (Ex: 18~24VDC); the customer must specify what they want the voltage set at.
3. Ripple and Noise is measured at nominal line and full load with 20MHz limited bandwidth and a 0.1µF ceramic and 47µF aluminum capacitors in
parallel on the output.
4. Optional output connectors are available. Please call factory for ordering details.
MECHANICAL DRAWING
5.20±0.04 (132±1)
2.13±0.04 (54±1)
1.22±0.04
(31±1)
Unit: inches (mm)
1.22±0.04
(31±1)
IEC-320-C14
IEC-320-C8
1.22±0.04
(31±1)
1.22±0.04
(31±1)
IEC-320-C6
02/07/2013
All dimensions are for reference only
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
Page 3 of 4
Rev. C
DTEM1070 Series
C14 and C6 Inlet Types
60~72 Watts, Single Outputs
AC/DC Medical Desktop Power Supplies
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development
engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008
certification is just one example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working
closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to
provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss
your future projects.
Contact Wall Industries for further information:
Phone:
Toll Free:
Fax:
E-mail:
Web:
Address:
02/07/2013
(603)778-2300
(888)597-9255
(603)778-9797
[email protected]
www.wallindustries.com
5 Watson Brook Rd.
Exeter, NH 03833
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
Page 4 of 4
Similar pages