Wall DCHB200-12S3.3 165 - 255 watts, half-brick dc - dc power converter Datasheet

DCHB200 SERIES
165~255 Watts, Half-Brick DC/DC Power Converters
Rev E
Wall Industries, Inc.
Standards Models
Terminal Block Models (“T” suffix)
Terminal Block w/ EMC Filter (“TF” suffix)
Terminal Block w/ EMC Filter (“TF1” suffix)
Size: 2.40 x 2.28 x 0.50 inches
Size: 3.35 x 2.40 x 1.27 inches
Size: 3.35 x 2.40 x 1.47 inches
Size: 3.35 x 2.40 x 1.53 inches
OPTIONS
FEATURES
•
•
•
•
•
•
•
•
Pin Length
Sync Pin
Case Pin
Heatsinks
Thru-Hole Inserts
Negative Logic Remote On/Off
Terminal Block
Terminal Block with Aluminum
Base-plate and EMC Filter
• Terminal Block with Anodized
Aluminum Base-plate and EMC
Filter, can be Connected to PE
• Soft-Start
• Single Outputs Ranging from 3.3VDC to 53VDC
• 2:1 Wide Input Voltage Ranges
• Input to Output Basic Insulation: 2250VDC
• 165~255 Watts Output Power
• Threaded Inserts and Thru-Hole Inserts Available
• No Minimum Load Requirements
• Short Circuit, Over Voltage, Over Current, & Over Temp. Protection
• Adjustable Output Voltage
• -40°C to +115°C Operating Case Temperature
• Remote On/Off Control
• Compliant to RoHS EU Directive 2011/65/EU
• Industry Standard Half-Brick Footprint
• CE Mark Meets 2006/95/EC, 2011/95/EC, and 2004/108/EC
• High Efficiency up to 93%
• UL60950-1, EN60950-1, & IEC60950-1 Safety Approvals
• Six-Sided Shielding
• Several Mechanical Options Available
APPLICATIONS
DESCRIPTION
•
•
•
•
•
•
•
The DCHB200 series of DC/DC power converters provides up to 255 Watts of output power in an industry standard
half-brick package and footprint. This series consists of single output models ranging from 3.3VDC to 53VDC with
2:1 wide input voltage ranges. Some features include high efficiency up to 93%, adjustable output voltage, and
remote on/off control. These converters also have short circuit, over voltage, over current, and over temperature
protection. The DCHB200 series is RoHS compliant and has UL60950-1, EN60950-1, and IEC60950-1 safety approvals.
Several different options are available for this series including negative remote on/off control, terminal block, pin
length, heatsinks, sync pin, case pin, and thru-hole inserts.
Wireless Networks
Measurement Equipment
Telecom / Datacom
Industry Control Systems
Distributed Power Architectures
Semiconductor Equipment
Military Applications
MODEL SELECTION TABLE
Model Number
Input Voltage
DCHB200-12S3.3
DCHB200-12S05
DCHB200-12S12
DCHB200-12S15
DCHB200-12S24
DCHB200-12S28
DCHB200-12S48
DCHB200-24S3.3
DCHB200-24S05
DCHB200-24S12
DCHB200-24S15
DCHB200-24S24
DCHB200-24S28
DCHB200-24S48
DCHB200-48S3.3
DCHB200-48S05
DCHB200-48S12
DCHB200-48S15
DCHB200-48S24
DCHB200-48S28
DCHB200-48S48
DCHB200-48S53
12 VDC
(9 - 22 VDC)
09/04/2014
12 VDC
(8.5 - 22 VDC)
24 VDC
(16.5 - 36 VDC)
48 VDC
(33 - 75 VDC)
Output
Voltage
3.3 VDC
5 VDC
12 VDC
15 VDC
24 VDC
28 VDC
48 VDC
3.3 VDC
5 VDC
12 VDC
15 VDC
24 VDC
28 VDC
48 VDC
3.3 VDC
5 VDC
12 VDC
15 VDC
24 VDC
28 VDC
48 VDC
53 VDC
Output Current
Min. load Full load
0mA
50A
0mA
36A
0mA
15A
0mA
12A
0mA
7.5A
0mA
6.5A
0mA
3.7A
0mA
50A
0mA
40A
0mA
18A
0mA
15A
0mA
9A
0mA
7.5A
0mA
4.5A
0mA
60A
0mA
46A
0mA
21A
0mA
17A
0mA
10.5A
0mA
9A
0mA
5.2A
0mA
4.7A
No Load (2)
Input Current
25mA
90mA
90mA
55mA
70mA
55mA
75mA
20mA
35mA
45mA
45mA
40mA
50mA
50mA
20mA
20mA
25mA
25mA
25mA
25mA
25mA
25mA
Ripple & Noise (3) (4)
75mVp-p
75mVp-p
100mVp-p
100mVp-p
200mVp-p
200mVp-p
300mVp-p
75mVp-p
75mVp-p
100mVp-p
100mVp-p
200mVp-p
200mVp-p
300mVp-p
75mVp-p
75mVp-p
100mVp-p
100mVp-p
200mVp-p
200mVp-p
300mVp-p
300mVp-p
Output
Power
165W
180W
180W
180W
180W
182W
177.6W
165W
200W
216W
225W
216W
210W
216W
198W
230W
252W
255W
252W
252W
249.6W
249.1W
Maximum
Capacitive Load (5)
151000µF
72000µF
12500µF
8000µF
3100µF
2300µF
770µF
151000µF
80000µF
15000µF
10000µF
3700µF
2600µF
930µF
181000µF
92000µF
17500µF
11300µF
4300µF
3200µF
1000µF
880µF
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Efficiency (3)
87%
90%
90%
90%
90%
90%
89%
88%
91%
91%
91%
93%
93%
91%
90%
91%
91%
93%
92%
92%
92%
92%
Page 1 of 9
DCHB200 SERIES
165~255 Watts, Half-Brick DC/DC Power Converters
Rev E
Wall Industries, Inc.
SPECIFICATIONS: DCHB200 SERIES
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
9
8.5
16.5
33
12
12
24
48
Max
Unit
INPUT SPECIFICATIONS
12VDC nominal input models
Input Voltage Range
Start-Up Voltage
Shutdown Voltage
Input Surge Voltage (1sec, max.)
Input Current
Input Filter (See Note 1)
Sync Pin Signal (See Note 2)
OUTPUT SPECIFICATIONS
Output Voltage
Voltage Accuracy
Line Regulation
Load Regulation
Voltage Adjustability
Remote Sense (See Note 3)
Output Power
Output Current
Minimum Load
Maximum Capacitive Load
Ripple & Noise (20MHz bandwidth)
Transient Response Recovery Time
Start-Up Time
3.3Vout & 5Vout models
Other models
24VDC nominal input models
48VDC nominal input models
12VDC nominal input models
24VDC nominal input models
48VDC nominal input models
12VDC nominal input models
24VDC nominal input models
48VDC nominal input models
12VDC nominal input models
24VDC nominal input models
48VDC nominal input models
No Load
7.3
15.5
31.6
-0.3
Low line to high line at full load
No load to full load
Maximum output deviation is inclusive of remote sense
% of nominal Vout
3.3Vout & 5Vout
12Vout & 15Vout
24Vout & 28Vout
48Vout & 53Vout
Constant resistive load
Power Up
Remote On/Off
Referenced to –Input pin
Negative Logic (optional)
Referenced to –Input pin
Thermal Impedance (See Note 4)
Relative Humidity
Thermal Shock
Vibration
MTBF
09/04/2014
75
100
200
300
200
75
75
DC/DC ON
DC/DC OFF
DC/DC ON
DC/DC OFF
% of rated Iout; hiccup mode
% of nominal Vout; hiccup mode
120
115
Base-plate
Terminal block types
Others
-40
-40
-55
VDC
VDC
VDC
%
%
%
%
%
mVp-p
250
µs
ms
+0.02
%/°C
Open or 3~12 VDC
Short or 0~1.2VDC
Short or 0~1.2VDC
Open or 3~12 VDC
1
3
mA
mA
Continuous, automatic recovery
150
%
130
%
+120
°C
Module without assembly option
Only mounted on iron base-plate
0.24” height heatsink
0.45” height heatsink
+115
+105
+125
6.1
2.8
5.1
4.6
5
MIL-HDBK-217F, full load
VDC
%
-0.5
Vertical direction and natural
convection (20LFM)
VDC
See Table
-0.02
Positive Logic (standard)
Storage Temperature
See Table
+1.0
+0.1
+0.1
+10
10
See Table
See Table
-1.0
-0.1
-0.1
-20
0
Minimum input and constant resistive load
With a 1µF/25V X7R MLCC and a 22µF/25V POS-CAP
With a 1µF/25V X7R MLCC and a 22µF/25V POS-CAP
With a 4.7µF/50V X7R MLCC
With a 2.2µF/100V X7R MLCC
25% load step change
Temperature Coefficient
REMOTE ON/OFF CONTROL
Input Current of CTRL Pin
Remote OFF Input Current
PROTECTION
Short Circuit Protection
Over Load Protection
Over Voltage Protection
Over Temperature Protection
ENVIRONMENTAL SPECIFICATIONS
Operating Case Temperature
22
22
36
75
9
18
34
8.1
16.3
32.5
30
50
100
See Table
Pi type
5.6
95
MIL-STD-810F
MIL-STD-810F
318,200
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
°C
°C
°C/W
% RH
hours
Page 2 of 9
DCHB200 SERIES
165~255 Watts, Half-Brick DC/DC Power Converters
Rev E
Wall Industries, Inc.
SPECIFICATIONS: DCHB200 SERIES
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
GENERAL SPECIFICATIONS
Efficiency
Switching Frequency
Nominal input voltage and full load
Isolation Voltage
1 minute (basic insulation)
Isolation Resistance
Isolation Capacitance
PHYSICAL SPECIFICATIONS
500VDC
Weight
Dimensions (L x W x H)
Min
Input to Output
Input to Case
Output to Case
225
2250
1600
1600
1
Typ
Max
Unit
See Table
250
275
kHz
VDC
GΩ
pF
2500
Standard models
“T” suffix models
“TF” suffix models
“TF1” suffix models
Standard models
“T” suffix models
“TF” suffix models
“TF1” suffix models
3.70oz (105g)
8.29oz (235g)
9.88oz (280g)
10.12oz (287g)
2.40 x 2.28 x 0.50 inches (61.0 x 57.9 x 12.7 mm)
3.35 x 2.40 x 1.27 inches (85.0 x 61.0 x 32.3 mm)
3.35 x 2.40 x 1.47 inches (85.0 x 61.0 x 37.3 mm)
3.35 x 2.40 x 1.53 inches (85.0 x 61.0 x 38.8 mm)
Metal
FR4 PCB
Silicon (UL94-V0)
Six-sided
Case Material
Base Material
Potting Material
Shielding
SAFETY & EMC CHARACTERISTICS
Safety Approvals
EMI (See Note 5)
EN55022
ESD
Radiated Immunity
Fast Transient (See Note 6)
Surge (See Note 6)
Conducted Immunity
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
Air ±8kV and Contact ±6kV
20 V/m
±2kV
EN55024 ±2kV
10 Vrms
IEC60950-1, UL60950-1, EN60950-1
Class A
Class B
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
NOTES
1. Input Source Impedance: These converters will operate under all listed specifications without external components assuming that the source voltage has
very low impedance and reasonable input voltage regulation. Highly inductive source impedances can affect the stability of the converter. Since real
world voltage sources have finite impedance, performance can be improved by adding an external filter capacitor. We recommend Nippon chemi-con KY
series, 100μF/100V.
2. (1) Multiple DCHB200 series modules can be synchronized together simply by connecting the module SYNC pins together. Care should be taken to
ensure the ground potential differences between the modules are minimized.
(2) In this configuration all of the modules will be synchronized to the highest frequency module.
(3) Up to three modules can be synchronized using this technique.
(4) More relevant information in the application notes.
3. Maximum output deviation is +10% inclusive of remote sense and trim. If remote sense is not being used the +SENSE should be connected to its
corresponding +OUTPUT and likewise the -SENSE should be connected to its corresponding –OUTPUT.
4. (1) Thermal test conditions for vertical direction are by natural convection (20LFM).
(2) The iron base-plate dimensions are 19” x 3.5” x 0.063” (the height is EIA standard 2U).
(3) Heat sink is optional. See the “Model Number Setup” table on page 7 for suffix options.
5. The DCHB200 standard models (without assembly options) can only meet EN55022 Class A or Class B with external components added.
6. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. We recommend connecting two aluminum electrolytic
capacitors (Nippon chemi-con KY series, 220μF/100V) in parallel.
7. Output voltage is adjustable for 10% trim up or -20% trim down of nominal output voltage by connecting a single resistor between TRIM and +SENSE pins
for trim up or between TRIM and -SENSE pins for trim down. To calculate the value of the resistor RU and RD for a particular output voltage see page 7.
8. CASE GROUNDING: EMI can be reduced when you connect the four screw bolts to the shield plane.
9. This series comes with several different options: negative remote on/off control, heatsinks, case pin, sync pin, pin length, terminal block, and thru-hole
inserts. See the “Model Number Setup” table on page 7 for more ordering information.
CAUTION: This power converter is not internally fused. An input line fuse must always be used.
09/04/2014
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 3 of 9
DCHB200 SERIES
165~255 Watts, Half-Brick DC/DC Power Converters
Rev E
Wall Industries, Inc.
DERATING CURVES
DCHB200-48S05 Derating Curve (Note 4)
120
Output Power (%)
100
80
DC/DC module only
100LFM
200LFM
300LFM
400LFM
500LFM
Mount on 2U iron base-plate
(dimensions: 19” x 3.5” x 0.063”)
Natural Convection (20LFM)
60
40
20
Terminal Block
Natural Convection (20LFM)
0
-40
-20
0
20
40
60
80
100
120
DCHB200-48S05 Derating Curve with 0.24” Height Heatsink (Note 4)
DCHB200-48S05 Derating Curve with 0.45” Height Heatsink (Note 4)
120
120
100
100
Output Power (%)
Output Power (%)
Ambient Temperature (°C)
80
60
40
Natural Convection (20LFM)
100LFM
200LFM
300LFM
400LFM
500LFM
20
0
-40
-20
0
20
80
60
40
20
40
60
80
100
0
-40
120
Natural Convection (20LFM)
100LFM
200LFM
300LFM
400LFM
500LFM
-20
0
Ambient Temperature (°C)
20
40
60
80
100
120
Ambient Temperature (°C)
EFFICIENCY GRAPHS
DCHB200-48S05 Efficiency vs Output Load
96
96
90
90
Efficiency (%)
Efficiency (%)
DCHB200-48S05 Efficiency vs Input Voltage
84
78
72
Iout=100% F.L.
Iout=50% F.L.
Iout=25% F.L.
66
60
33
09/04/2014
36
40
44
48 52
56
60
Input Voltage (VDC)
64
68
72
75
84
78
72
Vin=33V
Vin=48V
Vin=75V
66
60
10
20
30
40
50
60
70
% of Full Load
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
80
90
100
Page 4 of 9
DCHB200 SERIES
165~255 Watts, Half-Brick DC/DC Power Converters
Rev E
Wall Industries, Inc.
MECHANICAL DRAWING
Standard Models
Threaded (Standard) 4-M3X0.5
Thru-Hole (“TH” suffix) 4-Ø0.126 (Ø3.2)
The screw locked torque:
MAX 5.0kgf-cm/0.49N-m (Note 4)
FRONT VIEW
7
3
8
9
4
2.000 [50.80]
10
1.400 [35.56]
6
1.000 [25.40]
2
0.700 [17.78]
5
0.400
[10.16]
0.400
[10.16]
1
Pin
1
2
3
4
5
6
7
8
9
10
PIN CONNECTIONS
Define
Diameter
- INPUT
0.04 in.
CASE (optional)
0.04 in.
CTRL
0.04 in.
+ INPUT
0.04 in.
- OUTPUT
0.08 in.
- SENSE
0.04 in.
TRIM
0.04 in.
+ SENSE
0.04 in.
+ OUTPUT
0.08 in.
SYNC (optional)
0.04 in.
EXTERNAL OUTPUT TRIMMING
Output can be externally trimmed by
using the method shown below.
0.50
[12.7]
1.000 [25.40]
0.700 [17.78]
1.400 [35.56]
2.40 [61.0]
0.02 [0.6]
TRIM UP
0.20 [5.1]
1.900 [48.26]
2.28 [57.9]
0.200 [5.08]
0.50
[12.7]
TRIM DOWN
6
7
RD
RU
8
7
SIDE VIEW
BOTTOM VIEW
UNLESS OTHERWISE SPECIFIED
ALL DIMENSONS ARE IN INCHES
[ XX ] ARE IN MILLIMETERS
APPLIED TOLERANCES:
ANGLES= ±1°
.XX=±.02[0.5] .XXX=±.010[0.25]
DO NOT SCALE DRAWING
INTERPRET DIMENSION AND TOLERANCE
PER ASME Y14.5M - 1994
NOTES:
1. TOLERANCE: X.XX±0.02 [X.X±0.5]
X.XXX±0.010 [X.XX±0.25]
2. PIN PITCH TOLERANCE: ±0.01 [±0.25].
3. PIN DIMENSION TOLERANCE: ±0.004 [±0.1]
4. CASE GROUNDING: EMI CAN BE REDUCED WHEN THE FOUR
SCREW BOLTS ARE CONNECTED TO THE SHIELD PLANE
5. DIMENSIONS ARE FOR REFERENCE ONLY
TO ORDER:
6. FOR SYNC PIN ADD THE SUFFIX “SY” TO THE MODEL NUMBER
7. FOR CASE PIN ADD THE SUFFIX “CP” TO THE MODEL NUMBER
8. UNIT COMES WITH EITHER M3x0.5 THREADED-THRU INSERTS OR FOR
Ø.126 THRU-HOLE ADD THE “TH” SUFFIX TO MODEL NUMBER
9. FOR HEATSINK SEE THE “PRODUCT OPTIONS” TABLE FOR DIFFERENT OPTIONS
NOTE: THRU-HOLE MODELS CANNOT BE EQUIPPED WITH A HEATSINK
10. FOR TERMINAL BLOCK OPTIONS SEE PAGE 6
THIRD ANGLE PROJECTION
Product Options
Negative Remote ON/OFF Logic
Positive Remote ON/OFF Logic
Thru-Hole Inserts(1)
Suffix
Product Options
Suffix
0.200” pin length
R
H = 0.45” Vertical Fin
P/N: 7G-0021A-F
H
0.145” pin length
RL
H = 0.24” Horizontal Fin
P/N: 7G-0022A-F
H1
0.200” pin length
None
H = 0.24” Vertical Fin
P/N: 7G-0023A-F
H2
H = 0.45” Horizontal Fin
P/N: 7G-0024A-F
H3
0.145” pin length
Ø0.126 thru-hole (no thread) inserts
Heatsinks (1)(2)
S
TH
Sync Pin(3)
SY
Case Pin(3)
CP
(2)(3)(4)(5)
Terminal Block
Terminal Block
T
Terminal Block with Aluminum Base-plate and EMC Filter
Terminal block with anodized aluminum base-plate and
EMC filter, can be connected to protective earth (PE)
TF
TF1
NOTES
1. Models with thru-hole inserts cannot be equipped with a heatsink.
2. Terminal block models (suffix “T”, “TF”, and “TF1”) cannot be equipped with a heatsink.
3. No “SY” or “CP” functions for terminal block types.
4. Only 0.200” pin length is available with terminal block options.
5. Models with EMC filter (suffix “TF” and “TF1”) meet EN55011, EN55022 Class A.
09/04/2014
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 5 of 9
DCHB200 SERIES
165~255 Watts, Half-Brick DC/DC Power Converters
Rev E
Wall Industries, Inc.
TERMINAL BLOCK OPTIONS
Terminal Block with Aluminum Base-plate - Suffix “T”
2.40 [61.0]
1.25 [31.7]
Screw 1
4-M4X0.7
2.126 [54.00]
1
Screw 3
3 2
3.071 [78.00]
3.35 [85.0]
4
0.76 [19.3]
0]
9
8 7 6
PIN CONNECTIONS
Define
Wire Range
-INPUT
8AWG to 9AWG
NC
NA
CTRL
14AWG to 18AWG
+INPUT
8AWG to 9AWG
-OUTPUT
4AWG to 5AWG
-SENSE
14AWG to 18AWG
TRIM
14AWG to 18AWG
+SENSE
14AWG to 18AWG
+OUTPUT
4AWG to 5AWG
NOTES:
1. Unit: inches [mm]
2. Tolerance: X.XX±0.02 [X.X±0.5]
X.XXX±0.01 [X.XX±0.25]
3. Pin pitch tolerance±0.01 [±0.25]
4. Pin dimension tolerance: ±0.004 [±0.10]
5. Weight: 8.29oz (235g)
6. Terminal block models can not be equipped with a heatsink
7. No “SY” or “CP” functions for terminal block types
8. Only 0.200” pin length is available with terminal block options
9. Screw 1 locked torque: Max 11.2kgf-cm (1.10N-m)
10. Screw 2 locked torque: Max 5.2kgf-cm (0.51N-m)
11. Screw 3 locked torque: Max 16.8kgf-cm (1.65N-m)
5
Screw 2
Ø0
.1
7
[Ø
4. 2
TOP VIEW
Pin
1
2
3
4
5
6
7
8
9
Terminal Block with Aluminum Base-plate and EMC Filter (EN55022 Class A) - Suffix “TF”
2.40 [61.0]
2.126 [54.00]
2.00 [50.8]
Screw 3
0.76 [19.3]
1
3.071 [78.00]
3 2
1.60 [40.6]
3.35 [85.0]
4
1.47 [37.3]
Screw 1
4-M4X0.7
]
9
8 7 6
5
Screw 2
0.71 [18.0]
Ø0
.17
[Ø
4
.20
TOP VIEW
Pin
1
2
3
4
5
6
7
8
9
PIN CONNECTIONS
Define
Wire Range
-INPUT
8AWG to 9AWG
NC
NA
CTRL
14AWG to 18AWG
+INPUT
8AWG to 9AWG
-OUTPUT
4AWG to 5AWG
-SENSE
14AWG to 18AWG
TRIM
14AWG to 18AWG
+SENSE
14AWG to 18AWG
+OUTPUT
4AWG to 5AWG
NOTES:
1. Unit: inches [mm]
2. Tolerance: X.XX±0.02 [X.X±0.5]
X.XXX±0.01 [X.XX±0.25]
3. Pin pitch tolerance±0.01 [±0.25]
4. Pin dimension tolerance: ±0.004 [±0.10]
5. Weight: 9.88oz (280g)
6. Terminal block models can not be equipped with a heatsink
7. No “SY” or “CP” functions for terminal block types
8. Only 0.200” pin length is available with terminal block options
9. Screw 1 locked torque: Max 11.2kgf-cm (1.10N-m)
10. Screw 2 locked torque: Max 5.2kgf-cm (0.51N-m)
11. Screw 3 locked torque: Max 16.8kgf-cm (1.65N-m)
Terminal Block with Anodized Aluminum Base-plate and EMC Filter (EN55022 Class A) and can be Connected to PE - Suffix “TF1”
2.40 [61.0]
2.126 [54.00]
2.00 [50.8]
1
Ø0
.17
[Ø
4.2
0]
3.071(78.00)
9
09/04/2014
Pin
1
2
3
4
5
6
7
8
9
Screw 3
3 2
3.35 [85.0]
1.60 [40.6]
4
1.52 [38.7]
0.81 [20.7]
Screw 1
4-M4X0.7
8 7 6
TOP VIEW
5
Screw 2
0.71 [18.0]
PIN CONNECTIONS
Define
Wire Range
-INPUT
8AWG to 9AWG
NC
NA
CTRL
14AWG to 18AWG
+INPUT
8AWG to 9AWG
-OUTPUT
4AWG to 5AWG
-SENSE
14AWG to 18AWG
TRIM
14AWG to 18AWG
+SENSE
14AWG to 18AWG
+OUTPUT
4AWG to 5AWG
NOTES:
1. Unit: inches [mm]
2. Tolerance: X.XX±0.02 [X.X±0.5]
X.XXX±0.01 [X.XX±0.25]
3. Pin pitch tolerance±0.01 [±0.25]
4. Pin dimension tolerance: ±0.004 [±0.10]
5. Weight: 10.12oz (287g)
6. Terminal block models can not be equipped with a heatsink
7. No “SY” or “CP” functions for terminal block types
8. Only 0.200” pin length is available with terminal block options
9. Screw 1 locked torque: Max 11.2kgf-cm (1.10N-m)
10. Screw 2 locked torque: Max 5.2kgf-cm (0.51N-m)
11. Screw 3 locked torque: Max 16.8kgf-cm (1.65N-m)
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 6 of 9
DCHB200 SERIES
165~255 Watts, Half-Brick DC/DC Power Converters
Rev E
Wall Industries, Inc.
HEATSINK OPTIONS
Vertical Fin Orientation (Suffixes “H”, “H2”)
Horizontal Fin Orientation (Suffixes “H1”, “H3”)
2.28 (57.9)
H
Heatsink Options
Heatsink Options
H = 0.24” (H2 suffix)
H = 0.45” (H suffix)
H = 0.24” (H2 suffix)
H = 0.45” (H suffix)
2.40 (61.0)
Air Flow
2.40 (61.0)
2.28 (57.9)
NOTES
1. Unit: inches (mm)
2. Tolerance: x.xx±0.02 (x.x±0.5)
x.xxx±0.01 (x.xx±0.25)
3. All dimensions are for reference only
NOTES
1. Unit: inches (mm)
2. Tolerance: x.xx±0.02 (x.x±0.5)
x.xxx±0.01 (x.xx±0.25)
Air Flow
H
3. All dimensions are for reference only
OUTPUT VOLTAGE ADJUSTMENT
Output is adjustable for 10% trim up or -20% trim down of nominal output voltage by connecting an external resistor between the TRIM pin and
either the +SENSE or -SENSE pins. With an external resistor between the TRIM and -SENSE pin, the output voltage set decreases. With an external
between the TRIM and -SENSE pin, the output voltage set point increases. Maximum output deviation is +10% inclusive of remote sense. The
value of the external resistor can be obtained by the equations below. The external TRIM resistor needs to be at least 1/8W resistor.
Trim Up
Trim Down
7
 V (100+ ∆%) (100+ 2∆%) 
RU =  OUT
−
KΩ
∆%

 1.225∆%
6
 100 
RD = 
− 2KΩ
 ∆% 
RU
8
RD
7
MODEL NUMBER SETUP
DCHB
200
24
S
12
R
Series Name
Output Power
-
Input Voltage
Output Quantity
Ouptut Voltage
Remote On/Off & Pin Length
200: 200 Watts
12: 8.5 - 22 VDC
9 - 22 VDC
24: 16.5 - 36 VDC
48: 33 - 75 VDC
S: Single
3.3:
05:
12:
15:
24:
28:
48:
53:
3.3 VDC
5 VDC
12 VDC
15 VDC
24 VDC
28 VDC
48 VDC
53 VDC
None:
S:
R:
RL:
positive Logic, 0.200” pin length
positive Logic, 0.145” pin length
negative Logic, 0.200” pin length
negative Logic, 0.145” pin length
Y
C
TH
H
TF
Sync Pin (3)
Case Pin (3)
Thru-Hole Inserts (1)
Heatsink (1) (2)
Terminal Block (2) (3) (4) (5)
SY: sync pin
CP: case pin
None: threaded inserts
TH: Ø0.126 thru-hole inserts
None:
H:
H1:
H2:
H3:
no heatsink
0.45” vertical
0.24” horizontal
0.24” vertical
0.45” horizontal
None:
T:
TF:
TF1:
no terminal block
Terminal block with aluminum base-plate
Terminal block with aluminum base-plate and EMC filter
Terminal block with anodized aluminum base-plate and
EMC filter, can be connected to Protective Earth (PE)
NOTES
1. Models with thru-hole inserts cannot be equipped with a heatsink.
2. Terminal block models (suffix “T”, “TF”, and “TF1”) cannot be equipped with a heatsink.
3. No “SY” or “CP” functions for terminal block types.
4. Only 0.200” pin length is available with terminal block options.
5. Models with EMC filter (suffix “TF” and “TF1”) meet EN55011, EN55022 Class A.
09/04/2014
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 7 of 9
Wall Industries, Inc.
DCHB200 SERIES
165~255 Watts, Half-Brick DC/DC Power Converters
Rev E
APPLICATION NOTES
Assembly
1 Round-Head screw and spring washer (see note)
2 Terminal block
3 DC/DC converter
4 Thermal pad
5 Aluminum connection base-plate
6 Flat-head screw M3X0.5-6L (see note)
Note: Information for Assemble Screw
1. Tools: Automatic screwdriver
2. Torque: 4~5 kgf.cm
3. Assembly Sequence of Screw
Screw in opposite angles first, then fasten all four screws
4 thru-holes for mounting to user’s chassis
Al connection base-plate
4 holes for screwing the
terminal PCB to DC module
and Al connection base-plate
09/04/2014
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 8 of 9
Rev E
Wall Industries, Inc.
DCHB200 SERIES
165~255 Watts, Half-Brick DC/DC Power Converters
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will
provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one
example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its
customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing
support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects.
Contact Wall Industries for further information:
Phone:
Toll Free:
Fax:
E-mail:
Web:
Address:
09/04/2014
(603)778-2300
(888)597-9255
(603)778-9797
[email protected]
www.wallindustries.com
37 Industrial Drive
Exeter, NH 03833
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 9 of 9
Similar pages