PRODUCT DATASHEET Laura series last update 10/11/2016 DETAILS Product Number CA12325_LAURA-WW-PIN Family Laura Type Assembly Color white Diameter 21,6 x 21,6 mm Height 13,1 mm Style square Optic Material PMMA Holder Material Fastening tape, pin Status production ready ROHS Comliant Yes Date Updated 10/11/2016 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency cd/lm Connector XP-E 66 deg Very Wide 86 % 0.700 - XP-G 68 deg Very Wide 86 % 0.640 - XB-D 48 deg Very Wide 86 % 0.900 - LUXEON Rebel 56 deg Very Wide - 1.000 - LUXEON T 65 deg Very Wide 87 % 0.800 - LUXEON Z ES 44 deg Very Wide 91 % 1.150 - LUXEON H50-2 sim: 83 Very Wide sim: 93 % sim: 0.600 - NCSxx19B 49 deg Very Wide 88 % 1.100 - NF2x757D 42 deg Very Wide 88 % 1.300 - June 7th 2017 6:57 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10 24240 SALO, Finland http://www.ledil.com email: [email protected] FAX: +358-2-733 8001 Relative intensity of CA12325_LAURA-WW-PIN_(Luxeon Z ES) 100% 75% 50% 25% 0% 60 50 40 30 20 10 0 -10 -20 -30 -40 -50 -60 A B C D 13.86 13.06 4 4 Front view 3 Isometric view Scale: 2:1 21.57 PU foam tape 0.4mm 3 8.6 c/c 21.57 2 2 2 Bottom Top view INDEX PART NO 1 3 C11835 Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: Up to 30mm class M, otherwise class C. According to DIN ISO 2768-2 Form and position: class L 1 THIRD ANGLE PROJECTION: This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy. Laura-mech LAURA-PIN-XP-HLD-WHT MATERIAL COLOUR PMMA PC white Ledil Oy Salorankatu 10 FIN 24240 SALO Finland DRAWING TITLE LAURA-XP-PIN-WHT assembly SIZE 1 PART NUMBER A4 SCALE D DESCRIPTION 2:1 WEIGHT 9 g SHEET A 1/1 NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value.