Mechanical Dimensions FG25A01~25A07 Description TO-220AB Mechanical Data Features Low forward voltage drop High current capability High reliability High surge current capability Weight: 2.24 grams Cases: TO-220AB molded plastic Epoxy: UL 94V-0 rate flame retardant Terminals: Leads solderable per MIL-STD202, Method 208 guaranteed Polarity: As marked High temperature soldering guaranteed: 260℃/10 seconds .16”,(4.06mm) from case Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol FG FG FG Type Number FG FG FG FG Units 25A01 25A02 25A03 25A04 25A05 25A06 25A07 Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current .375”(9.5mm) Lead Length @TC = 100℃ Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @12.5A Maximum DC Reverse Current @ TC=25℃ at Rated DC Blocking Voltage VRRM VRMS VDC 50 35 50 100 200 70 140 100 200 400 280 400 600 420 600 800 1000 560 700 800 1000 V V V I(AV) 25.0 A IFSM 400 A VF 1.1 V IR 10 100 2.3 Operating and Storage Temperature Range TJ ,TSTG - 65 to + 175 Notes: 1. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C. 2. Thermal Resistance from Junction to Case Mounted on Heatsink size 2” x 3” x 0.25” Al-Plate Typical Junction Capacitance ( Note 1 ) Typical Thermal Resistance (Note 2) Cj uA uA pF C/W C RθJC FG25A01~25A07 RATINGS AND CHARACTERISTIC CURVES (FG25A01G THRU FG25A07G) FIG.2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 500 PEAK FORWARD SURGE CURRENT. (A) AVERAGE FORWARD CURRENT. (A) 30 FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE 25 20 Single Phase Half Wave 60Hz Resistive or Inductive Load 15 10 400 300 100 50 8 0 50 100 8.3ms Single Half Sine Wave JEDEC Method 200 0 175 1 2 5 10 20 50 o CASE TEMPERATURE. ( C) NUMBER OF CYCLES AT 60Hz FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4- TYPICAL REVERSE CHARACTERISTICS 400 100 40 Tj=25oC Pulse Width=300 s 1% Duty Cycle 20 40 INSTANTANEOUS REVERSE CURRENT. ( A) 100 10 4 2 1 10 Tj=125 0C 4 2 1 Tj=25 0C 0.4 0.4 0.2 0.2 0.1 0.1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 0 2.0 20 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) FORWARD VOLTAGE. (V) FIG.5- TYPICAL JUNCTION CAPACITANCE 120 JUNCTION CAPACITANCE.(pF) INSTANTANEOUS FORWARD CURRENT. (A) 200 100 80 60 Tj=25 0C 40 20 0 1 5 10 50 REVERSE VOLTAGE. (V) 100 500 1000 140 100