Wall DCHUB12-48D12H 12 watt dc/dc power converter Datasheet

DCHUB12H SERIES
12 Watt DC/DC Power Converters
Rev A
Wall Industries, Inc.
FEATURES
Size:
2.0 x 1.0 x 0.4 inches
50.8 x 25.4 x 10.2 mm
• Single and Dual Outputs
• 6 Pin DIP Package with Industry-Standard Footprint
• 12 Watts Output Power
• 2:1 Wide Input Voltage Ranges
• Remote On/Off Control
• Shielded Metal Case with Insulated Base-plate
• 3000VDC I/O Isolation
• -40°C to +85°C Operating Temperature Range
• High Efficiency up to 87%
• Industry Standard 2.0” x 1.0” x 0.4” DIP Package
• Lead Free Design, RoHS Compliant
• Short Circuit, Over Voltage, & Over Load Protection
• Free Air Convection
• Custom Designs Available
DESCRIPTION
APPLICATIONS
•
•
•
•
Battery Operated Equipment
Telecom
Industry Control Systems
Wireless Networks
• Measurement Equipment
The DCHUB12H series of isolated DC/DC power converters provides 12 Watts of continuous output
power in a 2.0” x 1.0” x 0.4” shielded metal case. This series consists of single and dual output
models with 2:1 input voltage ranges of 9-18VDC, 18-36VDC, and 36~75VDC. Some features
include high efficiency up to 87%, 3000VDC I/O isolation, remote on/off control, and -40°C to +85°C
operating temperature range. The DCHUB12H series is RoHS compliant and has short circuit, over
load, and over voltage protection. These converters are best suited for use in battery operated
equipment, measurement equipment, telecom, wireless networks, industry control systems, and
anywhere where isolated, tightly regulated voltages and compact size are required.
MODEL SELECTION TABLE
SINGLE OUTPUT MODELS
Model Number
Input Voltage
DCHUB12-12S33H
DCHUB12-12S05H
Output
Voltage
3.3 VDC
Output Current
Min Load
Full Load
0mA
3500mA
Input Current
No Load
Full Load
10mA
1318mA
Output
Power
Efficiency
Maximum
Capacitive Load
11.55W
77%
4700µF
5 VDC
0mA
2400mA
20mA
1282mA
12W
82%
3300µF
12 VDC
0mA
1000mA
22mA
1220mA
12W
86%
680µF
DCHUB12-12S15H
15 VDC
0mA
800mA
21mA
1235mA
12W
85%
330µF
DCHUB12-24S33H
3.3 VDC
0mA
3500mA
11mA
659mA
11.55W
77%
4700µF
DCHUB12-12S12H
DCHUB12-24S05H
12 VDC
(9 – 18 VDC)
5 VDC
0mA
2400mA
10mA
641mA
12W
82%
3300µF
12 VDC
0mA
1000mA
13mA
602mA
12W
87%
680µF
DCHUB12-24S15H
15 VDC
0mA
800mA
12mA
610mA
12W
86%
330µF
DCHUB12-48S33H
3.3 VDC
0mA
3500mA
3mA
325mA
11.55W
78%
3300µF
DCHUB12-24S12H
DCHUB12-48S05H
24 VDC
(18 – 36 VDC)
5 VDC
0mA
2400mA
6mA
321mA
12W
82%
1680µF
12 VDC
0mA
1000mA
7mA
301mA
12W
87%
220µF
DCHUB12-48S15H
15 VDC
0mA
800mA
6mA
305mA
12W
86%
147µF
Model Number
Input Voltage
Output
Voltage
Output
Power
Efficiency
Maximum
Capacitive Load
12 VDC
(9 – 18 VDC)
12W
82%
±1000µF
±12 VDC
12W
86%
±220µF
DCHUB12-48S12H
48 VDC
(36 – 75 VDC)
DUAL OUTPUT MODELS
DCHUB12-12D05H
DCHUB12-12D12H
DCHUB12-12D15H
DCHUB12-24D05H
DCHUB12-24D12H
DCHUB12-24D15H
DCHUB12-48D05H
DCHUB12-48D12H
DCHUB12-48D15H
06/19/2013
±5 VDC
Output Current
Min Load
Full Load
0mA
±1200mA
0mA
±500mA
Input Current
No Load
Full Load
19mA
1282mA
27mA
1220mA
±15 VDC
0mA
±400mA
31mA
1235mA
12W
85%
±200µF
24 VDC
(18 – 36 VDC)
±5 VDC
0mA
±1200mA
10mA
633mA
12W
83%
±1000µF
±12 VDC
0mA
±500mA
15mA
602mA
12W
87%
±147µF
±15 VDC
0mA
±400mA
17mA
610mA
12W
86%
±133µF
48 VDC
(36 – 75 VDC)
±5 VDC
0mA
±1200mA
6mA
316mA
12W
83%
±680µF
±12 VDC
0mA
±500mA
8mA
301mA
12W
87%
±68µF
±15 VDC
0mA
±400mA
9mA
305mA
12W
86%
±100µF
Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 1 of 4
Rev A
Wall Industries, Inc.
DCHUB12H SERIES
12 Watt DC/DC Power Converters
TECHNICAL SPECIFICATIONS: DCHUB12H SERIES
All specifications are based on 25°C, nominal input voltage, and maximum output current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Nom
9
18
36
12
24
48
Max
Unit
INPUT SPECIFICATIONS
Input Voltage Range
Input Surge Voltage (100ms max)
Input Reflected Ripple Current
Input Current
Input Filter
Remote On/Off
Sourcing Current of Remote Control Pin
Idle Input Current (at Remote OFF State)
12 VDC nominal input models
24VDC nominal input models
48VDC nominal input models
12 VDC nominal input models
24VDC nominal input models
48VDC nominal input models
Nominal Vin and full load
Converter ON
Converter OFF
Nominal Vin
Nominal Vin
18
VDC
36
75
25
VDC
50
100
130
mAp-p
See Table
Pi Type
Open or 3.5V < Vr < 12V
Short to -Vin (Pin 2) or 0V < Vr < 1.2V
0.2
mA
3
mA
Full load and nominal Vin
-1
OUTPUT SPECIFICATIONS
Output Voltage
Voltage Accuracy
Output Current
Minimum Load
Maximum Capacitive Load
Start-up Time
Line Regulation
Load Regulation
Output Power
Ripple & Noise
Temperature Coefficient
Transient Response Overshoot
Transient Response Settling Time
See Table
+1
See Table
0
Nominal Vin and constant resistive load
LL to HL at full load
Single output models
25% load to full load
Balanced load
Dual output models
Unbalanced load 25% to full load
%
-0.5
-0.5
-0.5
-5
20MHz bandwidth
di/dt=0.8A/µs
50% load step change
%
-5
See Table
550
+0.5
+0.5
+0.5
+5
12
100
±0.02
+5
2000
ms
%
%
W
mVp-p
%/°C
% of Vo
µs
PROTECTION
Over Voltage Protection
Short Circuit Protection
Over Load Protection
3.3VDC output models
5VDC output models
12VDC output models
15VDC output models
3.9
6.2
VDC
15
18
continuous, automatic recovery
150
%
Zener Diode Clamp
% of full load at nominal input
GENERAL SPECIFICATIONS
Efficiency
Isolation Voltage (Input to Output)
Isolation Resistance (Input to Output)
Isolation Capacitance
Switching Frequency
Nominal input
Input to Output
500VDC
See Table
3000
1
500
300
VDC
GΩ
pF
KHz
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
Maximum Case Surface Temperature
Storage Temperature
Relative Humidity
Cooling
MTBF
With derating (see derating curve)
-40
-55
5
+85
+100
+105
95
Free air convection
1,960,000 hours
°C
°C
°C
% RH
PHYSICAL SPECIFICATIONS
Case Material
Base Material
Potting Material
Weight
Dimensions (L x W x H)
06/19/2013
Nickel-coated copper
Non-conductive black plastic
Silicon rubber (UL94V-0)
1.06oz (30g)
2.0 x 1.0 x 0.4 inches (50.8 x 25.4 x 10.2 mm)
Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 2 of 4
DCHUB12H SERIES
12 Watt DC/DC Power Converters
Rev A
Wall Industries, Inc.
DERATING
DCHUB12-48S05 Derating Curve
120
Output Power (%)
100
80
60
40
20
0
-40
-20
0
20
40
60
71
80
100
120
Ambient Temperature (°C)
EFFICIENCY
DCHUB12-48S05 Efficiency vs Output Current
95
95
90
90
85
85
Efficiency (%)
Efficiency (%)
DCHUB12-48S05 Efficiency vs Input Voltage
80
75
70
80
75
70
65
65
60
60
55
18
24
30
36
42
48
54
60
66
Input Voltage (VDC)
75
55
0.24 0.48 0.72 0.96 1.20 1.40 1.68 1.92
2.16 2.40
Output Current (A)
CHARACTERISTICS
Transient Response at 50%~100% Max Load
06/19/2013
Loop Gain & Phase at Vin=48VDC, Full Load
Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 3 of 4
DCHUB12H SERIES
12 Watt DC/DC Power Converters
Rev A
Wall Industries, Inc.
MECHANICAL DRAWING
Unit: inches (mm)
2.0 (50.8)
0.3
0.2
0.3
(7.62) (5.08) (7.62)
4
2
BOTTOM VIEW
5
0.1
(2.5)
6
0.6 (15.2)
1.0 (25.4)
1
0.4 (10.16) 0.4 (10.16)
3
Pin
1
2
3
4
5
6
PIN CONNECTIONS
Single
Dual
+Vin
+Vin
-Vin
-Vin
+Vout
+Vout
No Pin
Common
-Vout
-Vout
Remote On/Off
(Optional)
Remote On/Off
(Optional)
0.8 (20.32)
0.2
0.4 (10.2) (5.08)
Ø0.04 (Ø1.0)
NOTES
1. Tolerance: ±0.02 (±0.5)
2. Case Material: nickel-coated copper
3. Base Material: non-conductive black plastic
4. Potting Material: silicon rubber (UL94V-0)
5. Weight: 1.06oz (30g)
6. All dimensions are for reference only
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will
provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one
example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its
customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing
support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects.
Contact Wall Industries for further information:
Phone:
Toll Free:
Fax:
E-mail:
Web:
Address:
06/19/2013
(603)778-2300
(888)597-9255
(603)778-9797
[email protected]
www.wallindustries.com
5 Watson Brook Rd.
Exeter, NH 03833
Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 4 of 4
Similar pages