EPCOS B82133A5152M000 Inductor Datasheet

Inductors
VHF chokes
Series/Type:
B82131, B82132, B82133, B82134
Date:
March 2008
Data Sheet
 EPCOS AG 2008. Reproduction, publication and dissemination of this publication, enclosures
hereto and the information contained therein without EPCOS’ prior express consent is prohibited.
VHF chokes
B82131 … B82134
Rated voltage 500 V AC/DC
Rated current 0.15 A to 6 A
Rated inductance 1 µH to 420 µH
Construction
■ Cylinder core of carbonyl iron
■ Winding: single-layer, enamel copper wire
■ Polyester insulating sleeve
Features
■
■
■
■
High resonant frequency
Design complies with EN 60938
Suitable for wave soldering
RoHS-compatible
Applications
■ RF blocking and filtering
■ Interference suppression in small appliances
■ Decoupling in telecommunications
and entertainment electronics
Terminals
■ Central axial leads
■ Base material Cu
■ Hot-dip tinned with pure tin
Marking
LR and IR in clear text
Delivery mode and packing units
■ Taped and reeled
■ Packing units:
Series
Pcs./reel
B82131, B82132
2000
B82133, B82134
1000
Please read Cautions and warnings and
Important notes at the end of this document.
2
03/08
VHF chokes
B82131 … B82134
Dimensional drawing
73 _ 1
*)
IND0145-U
1.2 max.
k max.
*)
e min.
10±0.5 10±0.5
*)
ø0.8
d max.
l max.
9±0.5
Tolerance over 10 spacings ±2 mm
IND0144-Z-E
Dimensions in mm
ø126+1
ø133
ø360 _ 1
ø30.5±0.15
Reel packing
30
95+1
30
Label
107 max.
IND0451-4-E
Dimensions in mm
Please read Cautions and warnings and
Important notes at the end of this document.
3
03/08
Lead spacing
e min (mm)
Type
17.5
22.5
27.5
32.5
B82131
B82132
B82133
B82134
VHF chokes
B82131 … B82134
Technical data and measuring conditions
Test voltage Vtest
2500 V AC, 1 min
Rated inductance LR
Measured with LCR meter Agilent 4284A
or impedance analyzer Agilent 4294A
= 1 MHz
Measuring frequency:
LR ≤ 10 µH
10 µH < LR ≤ 1000 µH = 100 kHz
Measuring voltage:
1V
Measuring temperature: 20 °C
Inductance tolerance
±20%
Rated temperature TR
60 °C
Rated current IR
Maximum permissible DC current at rated temperature
DC resistance Rtyp
Measured at 20 °C, tolerance ±20%, typical values
Resonance frequency fres
Measured with Agilent 4294A or 8753ES, 20 °C,
tolerance ±30%
Solderability (lead-free)
Sn95.5Ag3.8Cu0.7: (245 ±5) °C, (3 ±0.3) s
Wetting of soldering area ≥ 90%
(to IEC 60068-2-20, test Ta)
Resistance to soldering heat
(wave soldering)
(260 ±5) °C, 10 s
(to IEC 60068-2-20, test Tb)
Tensile strength of leads
≥ 30 N (to IEC 60068-2-21, test Ua)
Climatic category
55/125/56 (to IEC 60068-1)
Storage conditions
Mounted: –55 °C … +125 °C
Packaged: –25 °C … +40 °C, ≤ 75% RH
Mounting information
When bending the leads, take care that the bending point is at least 3 mm apart from the face ends
of the core and that the start-of-winding areas are not subjected to any mechanical stress.
Please read Cautions and warnings and
Important notes at the end of this document.
4
03/08
VHF chokes
B82131 … B82134
Characteristics and ordering codes
IR
LR
Rtyp
fres
Dimensions (mm)
A
µH
Ω
MHz
dmax
lmax
kmax
emin
Approx. Ordering code
weight
g
80
11
22
5
15
16.4
17.5
0.8
B82131A5151M000
160
17
20
5.5
20
21.4
22.5
0.9
B82132A5151M000
350
21
11
7.5
25
26.4
27.5
2.3
B82133A5151M000
420
19
12
7.5
30
31.4
32.5
2.6
B82134A5151M000
0.15
0.3
0.4
0.7
1.5
2
3
4
40
4.1
31
5
15
16.4
17.5
0.8
B82131A5301M000
70
5.7
29
5.5
20
21.4
22.5
0.9
B82132A5301M000
160
6.5
16
7.5
25
26.4
27.5
2.2
B82133A5301M000
210
6.4
18
7.5
30
31.4
32.5
2.8
B82134A5301M000
27
2.0
40
5
15
16.4
17.5
0.8
B82131A5401M000
50
3.0
37
5.5
20
21.4
22.5
1.0
B82132A5401M000
130
4.8
18
7.5
25
26.4
27.5
2.8
B82133A5401M000
150
3.5
18
7.5
30
31.4
32.5
2.8
B82134A5401M000
14
0.76
53
5
15
16.4
17.5
0.8
B82131A5701M000
23
0.73
55
5.5
20
21.4
22.5
1.0
B82132A5701M000
55
1.20
26
7.5
25
26.4
27.5
2.4
B82133A5701M000
60
0.77
34
7.5
30
31.4
32.5
3.0
B82134A5701M000
6
0.19
84
5
15
16.4
17.5
0.8
B82131A5152M000
8
0.16
90
5.5
20
21.4
22.5
1.1
B82132A5152M000
25
0.32
40
7.5
25
26.4
27.5
2.5
B82133A5152M000
30
0.30
44
7.5
30
31.4
32.5
3.2
B82134A5152M000
3
0.09
113
5
15
16.4
17.5
0.8
B82131A5202M000
6
0.11
108
5.5
20
21.4
22.5
1.1
B82132A5202M000
14
0.13
57
7.5
25
26.4
27.5
2.8
B82133A5202M000
20
0.15
59
7.5
30
31.4
32.5
3.3
B82134A5202M000
2
0.038
147
5
15
16.4
17.5
1.0
B82131A5302M000
3
0.035
151
5.5
20
21.4
22.5
1.2
B82132A5302M000
10
0.077
69
7.5
25
26.4
27.5
2.9
B82133A5302M000
12
0.090
75
7.5
30
31.4
32.5
3.5
B82134A5302M000
1
0.014
199
5
15
16.4
17.5
1.1
B82131A5402M000
2
0.020
186
5.5
20
21.4
22.5
1.4
B82132A5402M000
5
0.034
87
7.5
25
26.4
27.5
3.0
B82133A5402M000
Please read Cautions and warnings and
Important notes at the end of this document.
5
03/08
VHF chokes
B82131 … B82134
Impedance |Z| versus frequency f
measured with impedance analyzer Agilent 4294A or S-parameter network analyzer
Agilent 8753ES, typical values at 20 °C
B82132A5***M000
B82131A5***M000
IND0146-1
10 6
Ω
| Z|
B82131
| Z|
10 5
10 4
A5151
A5301
A5401
10 3
10 2
10 2
A5701
A5152
A5202
A5302
A5402
10 1
10 7
10 8
10 0 6
10
Hz 10 9
f
IND0148-6
| Z|
10 5
10 4
10 3
10 3
A5151
A5301
A5401
A5701
A5152
A5202
A5302
A5402
10 7
Hz 10 9
f
10 8
IND0149-9
B82134
10 5
10 4
10 0 6
10
10 8
10 6
Ω
10 1
10 7
B82134A5***M000
10 6
Ω B82133
10 2
A5701
A5152
A5202
A5302
A5402
10 1
B82133A5***M000
| Z|
A5151
A5301
A5401
10 5
10 4
10 3
10 0 6
10
IND0147-5
10 6
Ω B82132
A5151
A5301
A5401
A5701
A5152
A5202
A5302
10 2
10 1
10 0 6
10
Hz 10 9
f
6
03/08
10 7
10 8
Hz 10 9
f
VHF chokes
B82131 … B82134
Current derating Iop/IR
versus ambient temperature TA
(rated temperature TR = 60 °C)
IND0143-T-E
1.2
I op
IR
1.0
0.8
0.6
0.4
0.2
0
0
20
40
60
80
100
˚C
140
TA
7
03/08
Cautions and warnings
■ Please note the recommendations in our Inductors data book (latest edition) and in the data
sheets.
– Particular attention should be paid to the derating curves given there.
– The soldering conditions should also be observed. Temperatures quoted in relation to wave
soldering refer to the pin, not the housing.
■ If the components are to be washed varnished it is necessary to check whether the washing
varnish agent that is used has a negative effect on the wire insulation, any plastics that are used,
or on glued joints. In particular, it is possible for washing varnish agent residues to have a
negative effect in the long-term on wire insulation.
■ The following points must be observed if the components are potted in customer applications:
– Many potting materials shrink as they harden. They therefore exert a pressure on the plastic
housing or core. This pressure can have a deleterious effect on electrical properties, and in
extreme cases can damage the core or plastic housing mechanically.
– It is necessary to check whether the potting material used attacks or destroys the wire
insulation, plastics or glue.
– The effect of the potting material can change the high-frequency behaviour of the components.
■ Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to
breakage of the core.
■ Even for customer-specific products, conclusive validation of the component in the circuit can
only be carried out by the customer.
Please read Cautions and warnings and
Important notes at the end of this document.
8
03/08
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with
them than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or failure
before the end of their usual service life cannot be completely ruled out in the current state
of the art, even if they are operated as specified. In customer applications requiring a very
high level of operational safety and especially in customer applications in which the malfunction
or failure of an electronic component could endanger human life or health (e.g. in accident
prevention or life-saving systems), it must therefore be ensured by means of suitable design of
the customer application or other action taken by the customer (e.g. installation of protective
circuitry or redundancy) that no injury or damage is sustained by third parties in the event of
malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products.
Consequently, we cannot guarantee that all products named in this publication will always be
available.
The aforementioned does not apply in the case of individual agreements deviating from the
foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version
of the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DSSP, MiniBlue,
MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, SIFERRIT, SIFI, SIKOREL,
SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are
trademarks registered or pending in Europe and in other countries. Further information will be
found on the Internet at www.epcos.com/trademarks.
9
03/09
Similar pages