LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85℃ RHA Series RHA ・Realized higher voltage than RWF series (500 to 650Vdc) ・Endurance with ripple current : 5,000 hours at 85℃ ・Suitable for high voltage inverter ・RoHS compliant Higher voltage RWF P302 ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -25 to +85℃ 500 to 650Vdc ±20% (M) I=0.02CV or 5mA, whichever is smaller. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Dissipation Factor (tanδ) Low Temperature Characteristics Insulation Resistance (at 20℃, 120Hz) (at 20℃ after 5 minutes) 0.25 max. (at 20℃, 120Hz) Capacitance change C(-25℃)/C(+20℃)≧0.6 (at 120Hz) When measured between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case by using an insulation resistance meter of 500Vdc, the insulation resistance shall not be less than 100MΩ. When a voltage of 2,000Vac is applied for 1 minute between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case, there shall not be electrical damage. The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 85℃. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 500 hours at 85℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value Insulation Withstanding Voltage Endurance Shelf Life ◆DIMENSIONS (Screw-Mount) [mm] ● Mounting Clamp Code : B ● Mounting 4.5 B±1 F±1 φD+1.8max. Sleeve (Pb-free PVC : Black) 6 30°±5° Vent 45°±5° 8 J G±1 L+4max. Plastic disk φD 50 63.5 76.2 φ50 &φ63.5 : G=6 φ76.2 &φ89 : G=5 φ100 : G=10 <Screw specifications> toφ89 Plus hexagon-headed screw :M5×0.8×10 Clamp Code : C 360° 3 A±1 W±1 F W B A 78.0 64.0 68.0 22.4 90.0 76.0 80.0 28.0 104.5 90.0 93.5 31.5 φD 50 63.5 76.2 89 100 4.5 Code : LG K±1 E±1 ● Terminal E 32.5 38.1 44.5 50.8 56.5 K 37.0 43.5 50.0 56.5 63.4 F 22.4 28.0 31.5 31.5 41.5 J 14.0 14.0 14.0 16.0 18.0 Cross-recessed head (phillips) screw : M8×1.25×16 Spring washer,Washer Maximum screw tightening torque :6.31Nm * The screw and the mounting clamp are separately supplied and not attached to the product. Maximum screw tightening torque :3.23Nm φ100 ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E RH A AAA LG N AAA M AAA M Supplement code Size code Capacitance tolerance code Capacitance code (ex. 6,800µ F:682, 12,000µ F:123) Mounting clamp code (N, B, C) Terminal code Voltage code (ex. 500V:501, 650V:651) Series code Category Please refer to "Product code guide (screw-mount terminal type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 314 CAT. No. E1001Q LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85℃ RHASeries ◆STANDARD RATINGS WV (Vdc) 500 550 Cap (µF) 1,200 1,500 1,800 2,200 2,700 3,300 3,900 3,900 4,700 5,600 5,600 6,800 8,200 10,000 12,000 15,000 1,000 1,200 1,500 1,800 2,200 2,700 2,700 3,300 3,300 3,900 4,700 4,700 Rated ripple current Case size tanδ (Arms/ φD×L(mm) 85℃,120Hz) 50×95 50×115 50×130 50×150 63.5×120 63.5×140 63.5×170 76.2×130 76.2×150 76.2×170 89×130 89×150 89×190 89×210 100×210 100×250 50×95 50×110 50×130 63.5×105 63.5×120 63.5×150 76.2×105 63.5×170 76.2×130 76.2×140 76.2×170 89×130 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 5.90 7.20 8.30 9.80 11.2 13.3 15.7 15.4 18.1 20.8 17.1 20.0 24.4 28.2 32.9 39.8 5.40 6.30 7.60 8.60 10.1 12.4 11.7 14.5 14.2 15.9 19.1 15.6 WV (Vdc) Part No. ERHA501LGC122MC95M ERHA501LGC152MCB5M ERHA501LGC182MCD0M ERHA501LGC222MCF0M ERHA501LGC272MDC0M ERHA501LGC332MDE0M ERHA501LGC392MDH0M ERHA501LGC392MED0M ERHA501LGC472MEF0M ERHA501LGC562MEH0M ERHA501LGC562MFD0M ERHA501LGC682MFF0M ERHA501LGC822MFK0M ERHA501LGC103MFM0M ERHA501LGC123MGM0M ERHA501LGC153MGR0M ERHA551LGC102MC95M ERHA551LGC122MCB0M ERHA551LGC152MCD0M ERHA551LGC182MDA5M ERHA551LGC222MDC0M ERHA551LGC272MDF0M ERHA551LGC272MEA5M ERHA551LGC332MDH0M ERHA551LGC332MED0M ERHA551LGC392MEE0M ERHA551LGC472MEH0M ERHA551LGC472MFD0M 550 600 650 Cap (µF) 5,600 6,800 8,200 10,000 1,200 1,500 1,800 1,800 2,200 2,200 2,700 2,700 3,300 3,900 3,900 4,700 4,700 5,600 1,000 1,200 1,500 1,800 2,200 2,700 3,300 3,900 4,700 Rated ripple current Case size tanδ (Arms/ φD×L(mm) 85℃,120Hz) 89×150 89×170 100×170 100×200 63.5×95 63.5×110 63.5×125 76.2×95 63.5×145 76.2×110 63.5×170 76.2×125 76.2×145 76.2×170 89×130 76.2×190 89×150 89×170 63.5×100 63.5×110 63.5×130 63.5×150 63.5×170 76.2×150 76.2×170 89×155 89×190 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 18.2 21.1 24.8 29.4 6.70 8.00 9.30 9.10 11.0 10.8 13.1 12.6 14.9 17.3 14.2 20.0 16.6 19.1 6.30 7.20 8.60 10.1 11.7 13.6 15.8 15.3 18.4 Part No. ERHA551LGC562MFF0M ERHA551LGC682MFH0M ERHA551LGC822MGH0M ERHA551LGC103MGL0M ERHA601LGC122MD95M ERHA601LGC152MDB0M ERHA601LGC182MDC5M ERHA601LGC182ME95M ERHA601LGC222MDE5M ERHA601LGC222MEB0M ERHA601LGC272MDH0M ERHA601LGC272MEC5M ERHA601LGC332MEE5M ERHA601LGC392MEH0M ERHA601LGC392MFD0M ERHA601LGC472MEK0M ERHA601LGC472MFF0M ERHA601LGC562MFH0M ERHA651LGC102MDA0M ERHA651LGC122MDB0M ERHA651LGC152MDD0M ERHA651LGC182MDF0M ERHA651LGC222MDH0M ERHA651LGC272MEF0M ERHA651LGC332MEH0M ERHA651LGC392MFF5M ERHA651LGC472MFK0M ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency (Hz) Coefficient 50 0.8 120 1.0 300 1.2 1k 1.3 3k 1.4 Note : The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 to 10℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Also, for the RHA series capacitors, using them at operating voltage less than their rated voltage can extend their lifetime. For details, please contact a representative of Nippon Chemi-Con. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 315 CAT. No. E1001Q