AD ADAU1373BCBZ-RL Low power codec with speaker and headphone amplifier Datasheet

Low Power Codec with Speaker and
Headphone Amplifier
ADAU1373
FEATURES
Eight single-ended or four differential analog inputs with PGAs
are provided for adjusting the gain from −12 dB to +18 dB. They
can be configured for microphones or line level signals.
1 stereo ADC and 2 stereo DACs with sampling rates
from 8 kHz to 48 kHz
Low power: 7 mW record, 6 mW playback, 48 kHz at 1.8 V
8 single-ended or 4 differential inputs with PGA
2 microphone bias reference voltages with current sense
2 stereo digital microphone inputs
Flexible analog input/output mixers
1 stereo differential or 2 stereo single-ended line outputs
True ground-centered stereo Class-G headphone amplifier,
capable of 2 × 50 mW into 16 Ω at 1.8 V, 10% THD
Filterless stereo Class-D speaker amplifier, capable of 2 ×
880 mW into 8 Ω at 3.6 V, 10% THD
Differential earpiece amplifier capable of driving 32 Ω
2 PLLs, supporting input clocks from 8 kHz to 27 MHz
I2C control interface
Digital audio processing
3 digital audio input and output ports with ASRC
I2S, PCM, right-justified, left-justified modes
4.05 mm × 3.82 mm, 81-ball, 0.4 mm pitch WLCSP package
−40°C to +85°C operating temperature range
Two stereo digital microphone inputs are supported; four digital
microphones can be connected in total. In addition, three serial
digital audio input/output ports are provided with asynchronous
sample rate converters (ASRCs) to support various sampling rates,
allowing for flexible system design in mobile phone applications.
The inputs can be mixed and selected before the ADC or configured to bypass the ADC. Two stereo DACs are included, with
a flexible mixing option for routing the signals internally.
The analog output side consists of line outputs, headphone output,
speaker output, and receiver output. Two stereo single-ended
line level outputs, which can be configured as two differential
outputs, are included. The headphone output is stereo true ground
centered (eliminating the need for coupling capacitors), with
efficient Class-G (rail switching) architecture. The efficient stereo
filterless Class-D switching amplifier provides ~1 W of stereo
power for speakers. The differential receiver amplifier can be
used to connect the separate receiver speaker. Two PLL blocks,
which can lock to the inputs from 8 kHz to 27 MHz, are included.
APPLICATIONS
The DSP allows system designers to compensate for the real-world
limitations of microphones, speakers, amplifiers, and listening
environments, resulting in a dramatic improvement in perceived
audio quality through equalization, multiband compression, and
limiting algorithms. The SigmaStudio™ graphical development tool,
which includes audio processing blocks such as filters, mixers,
dynamics processors, and amplifiers for fast development of
custom signal flows, is used to program the ADAU1373.
Mobile phones, tablet PCs, e-books, portable media players
GENERAL DESCRIPTION
The ADAU1373 is a low power, stereo audio codec with integrated
digital audio processing that supports stereo 48 kHz record and
playback. The stereo audio ADCs and DACs support sampling
rates from 8 kHz to 48 kHz, as well as a digital volume control.
IOVDD1
IOVDD2
IOVDD3
IOVDD4
IOVDD5
AVDD
DVDD
HPVDD
CF1
CF2
CPVDD
CPVSS
SPKVDD
FUNCTIONAL BLOCK DIAGRAM
PLLA
I2 C
SPEAKER
AMP
DAC2
GPIO
MODE
ADDR
SCL
SDA
SD
ANALOG
INPUTS
HEADPHONE
AMP
DAC1
EPP
EPN
LOUT1L/LOUTLP, LOUT2L/LOUTLN
LOUT1R/LOUTRP, LOUT2R/LOUTRN
LN1FBIN, LN2FBIN
HPL
SGND
HPR
SPKLP
SPKLN
SPKRP
SPKRN
08975-023
ADC
MCLK1
MCLK2
AIN1L/AIN1P TO AIN4L/AIN4P
AIN1R/AIN1N TO AIN4R/AIN4N
FDSP
MUX
MIX
MUX
MIX
MICBIAS1, MICBIAS2
LINEOUT2
LINEOUT1
DGND
AGND
HPGND
SPKGND
CM
DMIC1_2_DATA
DMIC3_4_DATA
DMIC_CLK
DIGITAL
MICROPHONE
INPUT
OUTPUT
MUX
GPIO1
GPIO2
GPIO3
GPIO4
JACKDET
BCLKA/BCLKB/BCLKC
LRCLKA/LRCLKB/LRCLKC
SDATAINA/SDATAINB/SDATAINC
SDATAOUTA/SDATAOUTB/SDATAOUTC
EARPIECE
AMP
SERIAL
DIGITAL
AUDIO
INTERFACE
A
Figure 1.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2011 Analog Devices, Inc. All rights reserved.
ADAU1373
TABLE OF CONTENTS
Features .............................................................................................. 1
3D Enhancement........................................................................ 66
Applications....................................................................................... 1
Digital Automatic Level Control (ALC).................................. 67
General Description ......................................................................... 1
Interrupt Request (IRQ)............................................................ 69
Functional Block Diagram .............................................................. 1
Control Ports................................................................................... 70
Revision History ............................................................................... 6
I2C Port ........................................................................................ 70
Specifications..................................................................................... 7
Register Map Summary (Default) ................................................ 73
Power Supplies .............................................................................. 7
Register Bit Descriptions........................................................... 77
Audio Performance ...................................................................... 7
INPUT_MODE Register ........................................................... 77
Power Consumption .................................................................. 15
AIN1L_CTRL Register .............................................................. 78
Digital Filter/SRC Characteristics ............................................ 17
AIN1R_CTRL Register.............................................................. 80
Digital Input/Output Specifications......................................... 17
AIN2L_CTRL Register .............................................................. 82
Digital Timing Specifications ................................................... 18
AIN2R_CTRL Register.............................................................. 84
Absolute Maximum Ratings.......................................................... 21
AIN3L_CTRL Register .............................................................. 86
Thermal Resistance .................................................................... 21
AIN3R_CTRL Register.............................................................. 88
ESD Caution................................................................................ 21
AIN4L_CTRL Register .............................................................. 90
Pin Configuration and Function Descriptions........................... 22
AIN4R_CTRL Register.............................................................. 92
Typical Performance Characteristics ........................................... 25
LLINE1_OUT Register.............................................................. 94
Detailed Block Diagram ................................................................ 38
RLINE1_OUT Register ............................................................. 96
Theory of Operation ...................................................................... 39
LLINE2_OUT Register.............................................................. 98
Analog Inputs.............................................................................. 39
RLINE2_OUT Register ........................................................... 100
Mixer Block ................................................................................. 41
LCD_OUT (Speaker) Register ............................................... 102
Analog Outputs........................................................................... 41
RCD_OUT (Speaker) Register ............................................... 104
Headphone Output..................................................................... 43
LHP_OUT Register.................................................................. 106
Speaker Output ........................................................................... 44
RHP_OUT Register ................................................................. 108
Analog-to-Digital Converter (ADC) ....................................... 45
ADC_GAIN Register............................................................... 110
Digital-to-Analog Converter (DAC) ....................................... 45
LADC_MIXER Register.......................................................... 111
Clock Generation and Distribution ......................................... 45
RADC_MIXER Register ......................................................... 112
Sampling Rates............................................................................ 49
LLINE1MIX Register............................................................... 113
Setting the PLL and Clock Rates .............................................. 49
RLINE1MIX Register .............................................................. 114
Digital Microphone Input Interface......................................... 52
LLINE2MIX Register............................................................... 115
Digital Audio Interface .............................................................. 53
RLINE2MIX Register .............................................................. 116
Serial Data Input/Output Formats ........................................... 54
LCDMIX (Speaker Output) Register..................................... 117
Asynchronous Sample Rate Converter.................................... 55
RCDMIX (Speaker Output) Register..................................... 118
Mix/Mux...................................................................................... 56
LHPMIX Register..................................................................... 119
Fixed Function DSP (FDSP) ..................................................... 57
RHPMIX Register .................................................................... 120
High-Pass Filters (HPFs) ........................................................... 57
EPMIX Register ........................................................................ 121
Dynamic Range Control (DRC)............................................... 58
HP_CTRL Register .................................................................. 122
Programmable Seven-Band Equalizer..................................... 61
HP_CTRL2 Register ................................................................ 123
Coefficient Calculations ............................................................ 63
LS_CTRL (Speaker) Register .................................................. 124
Bass Enhancement...................................................................... 65
EPCONTROL Register............................................................ 125
Rev. 0 | Page 2 of 296
ADAU1373
MICBIAS_CTRL1 Register..................................................... 126
DEEMP_CTRL Register ..........................................................162
MICBIAS_CTRL2 Register..................................................... 127
SRC_DAI_A_CTRL Register ..................................................163
OUTPUT_CONTROL (Line) Register................................. 128
SRC_DAI_B_CTRL Register...................................................164
PWDN_CTRL1 Register......................................................... 129
SRC_DAI_C_CTRL Register ..................................................165
PWDN_CTRL2 Register......................................................... 130
DIN_MIX_CTRL0 (to FDSP Channel 0 Input)
Register.......................................................................................166
PWDN_CTRL3 Register......................................................... 131
DPLLA_CTRL Register........................................................... 132
PLLA_CTRL1 Register............................................................ 133
PLLA_CTRL2 Register............................................................ 133
PLLA_CTRL3 Register............................................................ 134
PLLA_CTRL4 Register............................................................ 134
PLLA_CTRL5 Register............................................................ 135
PLLA_CTRL6 Register............................................................ 136
DPLLB_CTRL Register ........................................................... 137
PLLB_CTRL1 Register ............................................................ 139
PLLB CTRL2 Register ............................................................. 139
PLLB_CTRL3 Register ............................................................ 139
PLLB_CTRL4 Register ............................................................ 140
PLLB_CTRL5 Register ............................................................ 140
PLLB_CTRL6 Register ............................................................ 141
HEADDECT Register.............................................................. 142
ADC_DAC_STATUS Register ............................................... 143
MIC_JACK_STATUS Register ............................................... 144
CHIP_FAULT_STATUS Register .......................................... 145
ADC_SETTING Register........................................................ 146
CLK1_SOURCE_DIV Register.............................................. 147
CLK1_OUTPUT_DIV Register............................................. 148
CLK2_SOURCE_DIV Register.............................................. 150
CLK2_OUTPUT_DIV Register............................................. 151
DAIA Register........................................................................... 153
DAIB Register........................................................................... 154
DAIC Register........................................................................... 155
BCLKDIVA Register................................................................ 156
BCLKDIVB Register................................................................ 157
BCLKDIVC Register................................................................ 158
SRCA_RATIOA Register ........................................................ 159
SRCA_RATIOB Register......................................................... 159
SRCB_RATIOA Register......................................................... 160
SRCB_RATIOB Register ......................................................... 160
SRCC_RATIOA Register ........................................................ 161
SRCC_RATIOB Register......................................................... 161
DIN_MIX_CTRL1 (to FDSP Channel 1 Input)
Register.......................................................................................167
DIN_MIX_CTRL2 (to FDSP Channel 2 Input)
Register.......................................................................................168
DIN_MIX_CTRL3 (to FDSP Channel 3 Input)
Register.......................................................................................169
DIN_MIX_CTRL4 (to FDSP Channel 4 Input)
Register.......................................................................................170
DOUT_MIX_CTRL0 (to Digital Audio Interface A
Recording Output) Register ....................................................171
DOUT_MIX_CTRL1 (to Digital Audio Interface B
Recording Output) Register ....................................................172
DOUT_MIX_CTRL2 (to Digital Audio Interface C
Recording Output) Register ....................................................173
DOUT_MIX_CTRL3 (to DAC1 Playback Input)
Register.......................................................................................174
DOUT_MIX_CTRL4 (to DAC2 Playback Input)
Register.......................................................................................175
VOLMOD1 Register.................................................................176
VOLMOD2 Register.................................................................177
DAIA_PBL_VOL Register .......................................................178
DAIA_PBR_VOL Register.......................................................178
DAIB_PBL_VOL Register .......................................................179
DAIB_PBR_VOL Register .......................................................179
DAIC_PBL_VOL Register .......................................................180
DAIC_PBR_VOL Register.......................................................180
DAIA_RECL_VOL Register ....................................................181
DAIA_RECR_VOL Register....................................................181
DAIB_RECL_VOL Register ....................................................182
DAIB_RECR_VOL Register....................................................182
DAIC_RECL_VOL Register ....................................................183
DAIC_RECR_VOL Register....................................................183
PBAL_VOL Register.................................................................184
PBAR_VOL Register ................................................................184
PBBL_VOL Register .................................................................185
PBBR_VOL Register.................................................................185
RECL_VOL Register.................................................................186
RECR_VOL Register ................................................................186
Rev. 0 | Page 3 of 296
ADAU1373
DRECL_VOL Register ............................................................. 187
DRC3_CTRL2 Register ........................................................... 221
DRECR_VOL Register............................................................. 187
DRC3_CTRL3 Register ........................................................... 222
VOL_GAIN1 (DAI Playback) Register ................................. 188
DRC3_CTRL4 Register ........................................................... 223
VOL_GAIN2 (DAI Record) Register .................................... 189
DRC3_CTRL5 Register ........................................................... 223
VOL_GAIN3 (Codec) Register .............................................. 190
DRC3_CTRL6 Register ........................................................... 224
HPF_CTRL Register ................................................................ 191
DRC3_CTRL7 Register ........................................................... 224
BASS1 Register.......................................................................... 192
DRC3_CTRL8 Register ........................................................... 225
BASS2 Register.......................................................................... 193
DRC3_CTRL9 Register ........................................................... 225
DRC1_CTRL1 Register ........................................................... 194
DRC3_CTRL10 Register ......................................................... 226
DRC1_CTRL2 Register ........................................................... 195
DRC3_CTRL11 Register ......................................................... 226
DRC1_CTRL3 Register ........................................................... 196
DRC3_CTRL12 Register ......................................................... 228
DRC1_CTRL4 Register ........................................................... 197
DRC3_CTRL13 Register ......................................................... 229
DRC1_CTRL5 Register ........................................................... 197
DRC3_CTRL14 Register ......................................................... 230
DRC1_CTRL6 Register ........................................................... 198
DRC3_CTRL15 Register ......................................................... 231
DRC1_CTRL7 Register ........................................................... 198
DRC3_CTRL16 Register ......................................................... 232
DRC1_CTRL8 Register ........................................................... 199
MDRC_PRE_FILTER Register............................................... 233
DRC1_CTRL9 Register ........................................................... 199
MDRC_SPL_CTRL (Splitter Frequencies) Register............ 233
DRC1_CTRL10 Register ......................................................... 200
MDRC_CTRL Register............................................................ 234
DRC1_CTRL11 Register ......................................................... 200
PRE_HPF1_COEFH (MSB) Register .................................... 234
DRC1_CTRL12 Register ......................................................... 202
PRE_HPF1_COEFL (LSB) Register ...................................... 235
DRC1_CTRL13 Register ......................................................... 203
PRE_HPF2_COEFH (MSB) Register .................................... 235
DRC1_CTRL14 Register ......................................................... 204
PRE_HPF2_COEFL (LSB) Register ...................................... 235
DRC1_CTRL15 Register ......................................................... 205
PRE_HPF3_COEFH (MSB) Register .................................... 236
DRC1_CTRL16 Register ......................................................... 206
PRE_HPF3_COEFL (LSB) Register ...................................... 236
DRC2_CTRL1 Register ........................................................... 207
PRE_HPF4_COEFH (MSB) Register .................................... 236
DRC2_CTRL2 Register ........................................................... 208
PRE_HPF4_COEFL (LSB) Register ...................................... 237
DRC2_CTRL3 Register ........................................................... 209
PRE_HPF5_COEFH (MSB) Register .................................... 237
DRC2_CTRL4 Register ........................................................... 210
PRE_HPF5_COEFL (LSB) Register ...................................... 237
DRC2_CTRL5 Register ........................................................... 210
PRE_HPF_CTRL Register ...................................................... 238
DRC2_CTRL6 Register ........................................................... 211
EQ_CTRL1 Register ................................................................ 239
DRC2_CTRL7 Register ........................................................... 211
EQ_CTRL2 Register ................................................................ 240
DRC2_CTRL8 Register ........................................................... 212
E3D_CTRL1 Register .............................................................. 241
DRC2_CTRL9 Register ........................................................... 212
E3D_CTRL2 Register .............................................................. 242
DRC2_CTRL10 Register ......................................................... 213
ALC_CTRL0 Register.............................................................. 243
DRC2_CTRL11 Register ......................................................... 213
ALC_CTRL1 Register.............................................................. 244
DRC2_CTRL12 Register ......................................................... 215
ALC_CTRL2 Register.............................................................. 245
DRC2_CTRL13 Register ......................................................... 216
ALC_CTRL3 Register.............................................................. 246
DRC2_CTRL14 Register ......................................................... 217
ALC_CTRL4 Register.............................................................. 247
DRC2_CTRL15 Register ......................................................... 218
ALC_CTRL5 Register.............................................................. 249
DRC2_CTRL16 Register ......................................................... 219
ALC_CTRL6 Register.............................................................. 251
DRC3_CTRL1 Register ........................................................... 220
FDSP_SEL1 Register ................................................................ 252
Rev. 0 | Page 4 of 296
ADAU1373
FDSP_SEL2 Register................................................................ 253
EQ3_COEF0_HI Register........................................................277
FDSP_SEL3 Register................................................................ 254
EQ3_COEF0_LO Register.......................................................278
FDSP_SEL4 Register................................................................ 255
EQ3_COEF1_HI Register........................................................278
PBALPCTRL1 Register ........................................................... 256
EQ3_COEF1_LO Register.......................................................278
PBBLPCTRL2 Register............................................................ 257
EQ3_COEF2_HI Register........................................................279
DIGMICCTRL Register .......................................................... 259
EQ3_COEF2_LO Register.......................................................279
GPIOSEL1 Register.................................................................. 260
EQ3_COEF3_HI Register........................................................279
GPIOSEL2 Register.................................................................. 261
EQ3_COEF3_LO Register.......................................................280
IRQ_MASK Register ............................................................... 262
EQ3_COEF4_HI Register........................................................280
IRQ_RAW Register.................................................................. 263
EQ3_COEF4_LO Register.......................................................280
IRQ_STATE (After Mask) Register ....................................... 264
EQ4_COEF0_HI Register........................................................281
IRQEN Register........................................................................ 265
EQ4_COEF0_LO Register.......................................................281
PAD_CTRL1 Register.............................................................. 265
EQ4_COEF1_HI Register........................................................281
PAD_CTRL2 Register.............................................................. 266
EQ4_COEF1_LO Register.......................................................282
DIGEN Register........................................................................ 267
EQ4_COEF2_HI Register........................................................282
LPCNTCTRL (Low Power Control Counter) Register....... 268
EQ4_COEF2_LO Register.......................................................282
CHIP_ID_HI Register............................................................. 268
EQ4_COEF3_HI Register........................................................283
CHIP_ID_MID Register ......................................................... 269
EQ4_COEF3_LO Register.......................................................283
CHIP_ID_LOW Register........................................................ 269
EQ4_COEF4_HI Register........................................................283
SOFT_RESET Register ............................................................ 269
EQ4_COEF4_LO Register.......................................................284
Register Map—EQ Coefficients ................................................. 270
EQ5_COEF0_HI Register........................................................284
EQ1_COEF0_HI Register....................................................... 271
EQ5_COEF0_LO Register.......................................................284
EQ1_COEF0_LO Register ...................................................... 271
EQ5_COEF1_HI Register........................................................285
EQ1_COEF1_HI Register....................................................... 271
EQ5_COEF1_LO Register.......................................................285
EQ1_COEF1_LO Register ...................................................... 272
EQ5_COEF2_HI Register........................................................285
EQ1_COEF2_HI Register....................................................... 272
EQ5_COEF2_LO Register.......................................................286
EQ1_COEF2_LO Register ...................................................... 272
EQ5_COEF3_HI Register........................................................286
EQ1_COEF3_HI Register....................................................... 273
EQ5_COEF3_LO Register.......................................................286
EQ1_COEF3_LO Register ...................................................... 273
EQ5_COEF4_HI Register........................................................287
EQ1_COEF4_HI Register....................................................... 273
EQ5_COEF4_LO Register.......................................................287
EQ1_COEF4_LO Register ...................................................... 274
EQ6_COEF0_HI Register........................................................287
EQ2_COEF0_HI Register....................................................... 274
EQ6_COEF0_LO Register.......................................................288
EQ2_COEF0_LO Register ...................................................... 274
EQ6_COEF1_HI Register........................................................288
EQ2_COEF1_HI Register....................................................... 275
EQ6_COEF1_LO Register.......................................................288
EQ2_COEF1_LO Register ...................................................... 275
EQ6_COEF2_HI Register........................................................289
EQ2_COEF2_HI Register....................................................... 275
EQ6_COEF2_LO Register.......................................................289
EQ2_COEF2_LO Register ...................................................... 276
EQ7_COEF0_HI Register........................................................289
EQ2_COEF3_HI Register....................................................... 276
EQ7_COEF0_LO Register.......................................................290
EQ2_COEF3_LO Register ...................................................... 276
EQ7_COEF1_HI Register........................................................290
EQ2_COEF4_HI Register....................................................... 277
EQ7_COEF1_LO Register.......................................................290
EQ2_COEF4_LO Register ...................................................... 277
EQ7_COEF2_HI Register........................................................291
Rev. 0 | Page 5 of 296
ADAU1373
EQ7_COEF2_LO Register ...................................................... 291
Outline Dimensions ..................................................................... 293
Applications Circuit ..................................................................... 292
Ordering Guide............................................................................. 293
REVISION HISTORY
5/11—Revision 0: Initial Version
Rev. 0 | Page 6 of 296
ADAU1373
SPECIFICATIONS
POWER SUPPLIES
Table 1.
Parameter
SUPPLY VOLTAGE RANGES
Analog
Digital
Input/Output
Charge Pump
Speaker Amplifier
1
Symbol
Min
Typ
Max
Unit
AVDD
DVDD 1
IOVDD
HPVDD
SPKVDD
1.62
1.08
1.62
1.62
2.5
1.8
1.2
1.8
1.8
1.98
1.98
3.6
1.98
5.5
V
V
V
V
V
For applications using DVDD = 1.8 V, IOVDDx ≥ DVDD.
AUDIO PERFORMANCE
fS = 48 kHz/24 bits, I2S format, AVDD = HPVDD = IOVDDx = 1.8 V, DVDD = 1.2 V, SPKVDD = 3.6 V, 1 kHz sine wave signal, 20 Hz to
20 kHz measurement bandwidth, TA = 25°C, unless otherwise noted.
Table 2.
Parameter
INPUT PROGRAMMABLE GAIN AMPLIFIERS
Input Resistance
Single-Ended PGA Mode
Single-Ended Boost Mode
Differential PGA Mode
Differential Boost Mode
Gain Range
PGA Mode
Boost Mode
Gain Step Size
Maximum Input Level
Single-Ended PGA Mode
Single-Ended Boost Mode
Differential PGA Mode
Differential Boost Mode
Equivalent Input Noise
Single-Ended PGA Mode
Single-Ended Boost Mode
Common-Mode Rejection Ratio
Differential PGA Mode
Mute Attenuation
Test Conditions/Comments
Min
Typ
Max
Unit
+18 dB gain
0 dB gain
−12 dB gain
+29 dB gain
+9 dB gain
0 dB gain
+18 dB gain
0 dB gain
−12 dB gain
+20 dB gain
+9 dB gain
0 dB gain
6.8
30
48
20
20
20
6.8
30
48
20
20
20
kΩ
kΩ
kΩ
kΩ
kΩ
kΩ
kΩ
kΩ
kΩ
kΩ
kΩ
kΩ
Minimum position
Maximum position
0 dB position
+9 dB position
+20 dB position
PGA mode
−12
+18
0
+9
+20
+1
dB
dB
dB
dB
dB
dB
0 dB gain
0 dB gain
0 dB gain
0 dB gain
0.545
0.545
1.09
1.09
V rms
V rms
V rms
V rms
0 dB gain, unweighted 20 Hz to 20 kHz
+18 dB gain, unweighted 20 Hz to 20 kHz
0 dB gain, unweighted 20 Hz to 20 kHz
+20 dB gain, unweighted 20 Hz to 20 kHz
7
28
7
35
μV rms
μV rms
μV rms
μV rms
0 dB gain at 217 Hz
Measured at line output reference to full scale
(0 dB gain at 1 kHz)
50
80
dB
dB
Rev. 0 | Page 7 of 296
ADAU1373
Parameter
MICROPHONE BIAS
Output Voltage
Output Current
Output Noise
PSRR
Bias Current Detect Threshold
Bias Short-Circuit Detect Threshold
MIXER BLOCK
Mixer ADC
Mute Attenuation
Mixer Line Output
Mute Attenuation
Mixer Headphone Output
Mute Attenuation
Mixer Speaker Output
Mute Attenuation
Mixer Earpiece Output
Mute Attenuation
LINE OUTPUT AMPLIFIER
Gain
Volume Control Step Size
Mute Attenuation
Maximum Output Level
Single-Ended Mode
Differential Mode
Output Resistance
Common-Mode Voltage
DC Offset
Ground-Loop Rejection Ratio
Test Conditions/Comments
Register 0x21, Bits[5:4] (MICB2GAIN); Bits[3:2] (MICB1GAIN)
Setting 00 = 2.9 V
Setting 01 = 2.2 V
Setting 10 = 2.6 V
Setting 11 = 1.8 V
Min
Typ
1.71
2.09
2.47
2.75
6
1.8
2.2
2.6
2.9
Unweighted 20 Hz to 20 kHz
AVDD at 217 Hz = 100 mV p-p
DVDD at 217 Hz = 100 mV p-p
HPVDD at 217 Hz = 100 mV p-p
SPKVDD at 217 Hz = 400 mV p-p
Register 0x22 and Register 0x23, Bits[1:0] (MICBxCURD)
Setting 00 = 150 μA
Setting 01 = 330 μA
Setting 10 = 510 μA
Setting 11 = 700 μA
Register 0x22 and Register 0x23, Bits[3:2] (MICBxSHT)
Setting 00 = 330 μA
Setting 01 = 700 μA
Setting 10 = 1000 μA
Setting 11 = 1400 μA
Max
7
100
100
100
85
V
V
V
V
mA
μV rms
dB
dB
dB
dB
150
330
510
700
μA
μA
μA
μA
330
700
1000
1400
μA
μA
μA
μA
90
dB
90
dB
90
dB
90
dB
90
dB
0
Variable from mute to 0 dB in 32 steps
Load = 10 kΩ
Load = 10 kΩ
At each output pin: LOUT1L, LOUT1R, LOUT2L, and
LOUT2R
VCM at LOUT1L, LOUT1R, LOUT2L, and LOUT2R
Differential mode between LOUTLP and LOUTLN, LOUTRP
and LOUTRN
Measured by injecting 1000 Hz sine wave,100 mV rms at
LNxFBIN; referenced to full-scale output voltage
Input Resistance into LNxFBIN Pin
Rev. 0 | Page 8 of 296
Unit
90
dB
dB
dB
0.545
1.09
0.3
V rms
V rms
Ω
AVDD/2
1
V
mV
56
dB
120
kΩ
Mute
0
ADAU1373
Parameter
HEADPHONE AMPLIFIER
Gain
Volume Control Step Size
Mute Attenuation
Output Level at 1% THD + N
Output Level at 10% THD + N
Efficiency
DC Offset
Output Limiter Threshold
Load Resistance
Load Capacitance
Turn On Time
Turn Off Time
SPEAKER AMPLIFIER
Gain
Volume Control Step Size
Mute Attenuation
Output Power at 1% THD + N
Output Power at 10% THD + N
Output Power at 1% THD + N
Test Conditions/Comments
Min
Typ
Max
Unit
−69
−69
0
Variable from −69 dB to +6 dB in 32 steps
+6
+6
dB
dB
dB
mW
mW
V rms
mW
mW
V rms
%
%
mV
V pk
V pk
V pk
V pk
V pk
V pk
V pk
Ω
pF
ms
ms
Load = 16 Ω
Load = 32 Ω
Load = 10 kΩ
Load = 16 Ω
Load = 32 Ω
Load = 10 kΩ
POUT = 3 mW, HPVDD = 1.8 V, RL = 16 Ω
POUT = 3.5 mW, HPVDD = 1.8 V, RL = 32 Ω
HPVDD = 1.8 V, RL = 16 Ω
Peak output at HPL, HPR; setting VOUT = 1.1 V peak
Peak output at HPL, HPR; setting VOUT = 0.968 V peak
Peak output at HPL, HPR; setting VOUT = 0.815 V peak
Peak output at HPL, HPR; setting VOUT = 0.56 V peak
Peak output at HPL, HPR; setting VOUT = 0.408 V peak
Peak output at HPL, HPR; setting VOUT = 0.28 V peak
Peak output at HPL, HPR; setting VOUT = 0.23 V peak
12
85
27
24
1.2
50
43
1.2
25
38
±3
1.1
0.97
0.82
0.56
0.41
0.28
0.23
16
150
17.1
1.9
Setting = 12 dB
Setting = 18 dB
Variable from mute to 0 dB in 32 steps
SPKVDD = 2.5 V, 4 Ω + 15 μH (stereo)
SPKVDD = 3.6 V, 4 Ω + 15 μH (stereo)
SPKVDD = 4.2 V, 4 Ω + 15 μH (stereo)
SPKVDD = 5 V, 4 Ω + 15 μH (stereo)
SPKVDD = 2.5 V, 8 Ω + 33 μH (stereo)
SPKVDD = 3.6 V, 8 Ω + 33 μH (stereo)
SPKVDD = 4.2 V, 8 Ω + 33 μH (stereo)
SPKVDD = 5 V, 8 Ω + 33 μH (stereo)
SPKVDD = 2.5 V, 4 Ω + 15 μH (stereo)
SPKVDD = 3.6 V, 4 Ω + 15 μH (stereo)
SPKVDD = 4.2 V, 4 Ω + 15 μH (stereo)
SPKVDD = 5 V, 4 Ω + 15 μH (stereo)
SPKVDD = 2.5 V, 8 Ω + 33 μH (stereo)
SPKVDD = 3.6 V, 8 Ω + 33 μH (stereo)
SPKVDD = 4.2 V, 8 Ω + 33 μH (stereo)
SPKVDD = 5 V, 8 Ω + 33 μH (stereo)
SPKVDD = 2.5 V, 4 Ω + 15 μH (mono)
SPKVDD = 3.6 V, 4 Ω + 15 μH (mono)
SPKVDD = 4.2 V, 4 Ω + 15 μH (mono)
SPKVDD = 5 V, 4 Ω + 15 μH (mono)
SPKVDD = 2.5 V, 8 Ω + 33 μH (mono)
SPKVDD = 3.6 V, 8 Ω + 33 μH (mono)
SPKVDD = 4.2 V, 8 Ω + 33 μH (mono)
SPKVDD = 5 V, 8 Ω + 33 μH (mono)
Rev. 0 | Page 9 of 296
12
18
Mute
0
90
0.554
1.212
1.679
2.4
0.33
0.71
0.98
1.40
0.691
1.511
2.091
2.99
0.41
0.88
1.22
1.73
0.588
1.285
1.78
2.55
0.34
0.73
1.00
1.43
dB
dB
dB
dB
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
ADAU1373
Parameter
Output Power at 10% THD + N
Efficiency
Average Switching Frequency
RDS On
DC Offset
Load Resistance
Recovery Time from Protect Mode
Turn On Time
Turn Off Time
EARPIECE AMPLIFIER
Gain
Gain Step Size
Mute Attenuation
Output Level at 1% THD + N
Output Power at 10% THD + N
DC Offset
Test Conditions/Comments
SPKVDD = 2.5 V, 4 Ω + 15 μH (mono)
SPKVDD = 3.6 V, 4 Ω + 15 μH (mono)
SPKVDD = 4.2 V, 4 Ω + 15 μH (mono)
SPKVDD = 5 V, 4 Ω + 15 μH (mono)
SPKVDD = 2.5 V, 8 Ω + 33 μH (mono)
SPKVDD = 3.6 V, 8 Ω + 33 μH (mono)
SPKVDD = 4.2 V, 8 Ω + 33 μH (mono)
SPKVDD = 5 V, 8 Ω + 33 μH (mono)
POUT = 2.4 W, SPKVDD = 5 V, RL = 4 Ω + 15 μH (stereo)
POUT = 1.2 W, SPKVDD = 3.6 V, RL = 4 Ω + 15 μH (stereo)
POUT = 1.4 W, SPKVDD = 5 V, RL = 8 Ω + 33 μH (stereo)
POUT = 0.71 W, SPKVDD = 3.6 V, RL = 8 Ω + 33 μH (stereo)
NMOS at 100 mA
PMOS at 100 mA
Gain = 12 dB, SPKVDD = 3.6 V
Mono mode
Stereo mode
Min
3
4
256
From high-Z (mute) to outputs switching state
From output switching to high-Z (mute) state
SPKVDD = 2.5 V, load = 8 Ω
SPKVDD = 2.5 V, load = 16 Ω
SPKVDD = 2.5 V, load = 32 Ω
SPKVDD = 3.6 V, load = 8 Ω
SPKVDD = 3.6 V, load = 16 Ω
SPKVDD = 3.6 V, load = 32 Ω
SPKVDD = 5 V, load = 8 Ω
SPKVDD = 5 V, load = 16 Ω
SPKVDD = 5 V, load = 32 Ω
SPKVDD = 2.5 V, load = 8 Ω
SPKVDD = 2.5 V, load = 16 Ω
SPKVDD = 2.5 V, load = 32 Ω
SPKVDD = 3.6 V, load = 8 Ω
SPKVDD = 3.6 V, load = 16 Ω
SPKVDD = 3.6 V, load = 32 Ω
SPKVDD = 5 V, load = 8 Ω
SPKVDD = 5 V, load = 16 Ω
SPKVDD = 5 V, load = 32 Ω
SPKVDD = 3.6 V, load = 32 Ω, gain = 0 dB
SPKVDD = 3.6 V, load = 32 Ω, gain = 6 dB
SPKVDD = 3.6 V, load = 32 Ω, gain = 12 dB
512
6
6
85
53
66
58
123
103
69
140
110
72
74
91
73
162
134
89
178
142
92
±1
±2
±3
8
9.6
4.1
Rev. 0 | Page 10 of 296
Max
3.5
1.8
0
Load Resistance
Turn On Time
Turn Off Time
Typ
0.733
1.611
2.22
3.18
0.43
0.905
1.25
1.78
89
87
93
92
350
180
210
±3
12
Unit
W
W
W
W
W
W
W
W
%
%
%
%
kHz
mΩ
mΩ
mV
Ω
Ω
ms
ms
ms
dB
dB
dB
mW
mW
mW
mW
mW
mW
mW
mW
mW
mW
mW
mW
mW
mW
mW
mW
mW
mW
mV
mV
mV
Ω
ms
ms
ADAU1373
Parameter
ANALOG INPUT → ADC → DIGITAL OUTPUT
ADC Resolution
Dynamic Range
Unweighted (RMS)
A-weighted (RMS)
Signal-to-Noise Ratio
THD + N
Offset Error
Gain Drift
Interchannel Isolation
PSRR
DIGITAL MICROPHONE INPUT → ADC→
DIGITAL OUTPUT
Dynamic Range
Unweighted (rms)
A-weighted (rms)
Signal-to-Noise Ratio
THD + N
Offset Error
Gain Drift
Interchannel Isolation
PSRR
ANALOG INPUT → LINE OUTPUT
Dynamic Range
Unweighted (RMS)
A-weighted (RMS)
Signal-to-Noise Ratio
THD + N
Interchannel Isolation
PSRR
ANALOG INPUT → HEADPHONE OUTPUT
Dynamic Range
Signal-to-Noise Ratio
THD + N
Interchannel Isolation
PSRR
Test Conditions/Comments
All ADCs
−60 dBFS input at 1 kHz
A-weighted (rms), referred to full-scale output
−1 dBFS input at 1 kHz
AVDD ripple = 100 mV p-p at 217 Hz, input referred for
PGA gain = 0 dB
All other supplies (HPVDD, SPKVDD, DVDD, IOVDDx) =
100 mV p-p at 217 Hz, input referred for PGA gain = 0 dB
Min
Typ
AVDD ripple = 100 mV p-p at 217 Hz, input referred for
PGA gain = 0 dB
All other supplies (HPVDD, SPKVDD, DVDD, IOVDDx) =
100 mV p-p at 217 Hz, input referred for PGA gain = 0 dB
Unit
24
Bits
93
96
96
0.01
±1
100
85
85
dB
dB
dB
%
mV
ppm/°C
dB
dB
85
dB
−60 dBFS input at 1 kHz
A-weighted (rms)
−1 dBFS at 1 kHz
Max
dB
dB
93
96
96
0.01
±1
100
85
85
dB
%
mV
ppm/°C
dB
dB
85
dB
91
94
dB
dB
dB
−60 dBFS input at 1 kHz
Differential line output, A-weighted (rms), referred to
full-scale output
VOUT = 1 V, 1 kHz, RL=10 kΩ
VOUT = 0.5 V, 1 kHz, RL=10 kΩ
AVDD ripple = 100 mV p-p at 217 Hz, input referred for
PGA gain = 0 dB
All other supplies (HPVDD, SPKVDD, DVDD, IOVDDx) =
100 mV p-p at 217 Hz, input referred for PGA gain = 0 dB
−60 dBFS input at 1 kHz
Unweighted (rms)
A-weighted (rms)
A-weighted (rms), referred to full-scale output
POUT = 27 mW, 1 kHz, RL = 16 Ω
HPVDD ripple = 100 mV p-p at 217 Hz, input referred for
PGA gain = 0 dB
All other supplies (AVDD, SPKVDD, DVDD, IOVDDx) =
100 mV p-p at 217 Hz, input referred for PGA gain = 0 dB
Rev. 0 | Page 11 of 296
94
0.013
0.017
85
85
%
%
dB
dB
85
dB
96
99
99
0.01
85
85
dB
dB
dB
%
dB
dB
85
dB
ADAU1373
Parameter
ANALOG INPUT → SPEAKER OUTPUT
Dynamic Range
Signal-to-Noise Ratio
THD + N
Interchannel Isolation
PSRR
ANALOG INPUT → EARPIECE OUTPUT
Dynamic Range
Signal-to-Noise Ratio
THD + N
PSRR
DIGITAL INPUT → DAC → MIXER →
LINE OUTPUT
Dynamic Range
Signal-to-Noise Ratio
THD + N
Full-Scale Output Voltage
Interchannel Isolation
Interchannel Phase Deviation
Digital Volume Control
Step
Range
PSRR
DIGITAL INPUT → DAC → MIXER →
HEADPHONE OUTPUT
Dynamic Range
Signal-to-Noise Ratio
THD + N
Full-Scale Output Voltage
Interchannel Isolation
Interchannel Phase Deviation
Digital Volume Control
Step
Range
Test Conditions/Comments
−60 dBFS input at 1 kHz
Unweighted (rms)
A-weighted (rms)
A-weighted (rms), referred to 0.7 W at 3.6 V, RL = 8 Ω
SPKVDD = 5 V, POUT = 1 W, 1 kHz, RL = 8 Ω
SPKVDD = 3.6 V, POUT = 0.5 W, 1kHz, RL = 8 Ω
SPKVDD ripple = 100 mV p-p at 217 Hz, input referred
for PGA gain = 12 dB
All other supplies (AVDD, HPVDD, DVDD, IOVDDx) =
100 mV p-p at 217 Hz, input referred for PGA gain = 12 dB
−60 dBFS input at 1 kHz
Unweighted (rms)
A-weighted (rms)
A-weighted (rms), referred to 40 mW at 3.6 V, RL = 32 Ω
POUT = 60 mW, 1 kHz, RL = 8 Ω
POUT = 30 mW, 1 kHz, RL = 8 Ω
AVDD ripple = 100 mV p-p at 217 Hz, input referred for
PGA gain = 12 dB
All other supplies (HPVDD, DVDD, SPKVDD, IOVDDx) =
100 mV p-p at 217 Hz, input referred for PGA gain = 12 dB
20 Hz to 20 kHz, −60 dBFS input, unweighted (rms)
20 Hz to 20 kHz, −60 dBFS input, A-weighted (rms)
20 Hz to 20 kHz, A-weighted, relative to full scale
At −1 dBFS, 1 kHz
Scales linearly with AVDD
AVDD ripple = 100 mV p-p at 217 Hz, input referred for
PGA gain = 12 dB
All other supplies (HPVDD, DVDD, SPKVDD, IOVDDx) =
100 mV p-p at 217 Hz, input referred for PGA gain = 12 dB
20 Hz to 20 kHz, −60 dBFS input, unweighted (rms)
20 Hz to 20 kHz, −60 dBFS input, A-weighted (rms)
20 Hz to 20 kHz, A-weighted, relative to full scale
At −1 dBFS, 1 kHz
Rev. 0 | Page 12 of 296
Min
Typ
Max
Unit
98
101
101
0.013
0.017
85
85
dB
dB
dB
%
%
dB
dB
85
dB
95
98
98
0.1
0.2
85
dB
dB
dB
%
%
dB
85
dB
93
96
96
0.01
1.0
100
0.1
dB
dB
dB
%
V rms
dB
Degrees
0.375
95
85
dB
dB
dB
85
dB
96
99
99
0.01
100
0.1
dB
dB
dB
%
V rms
dB
Degrees
0.375
95
dB
dB
ADAU1373
Parameter
DIGITAL INPUT → DAC → MIXER →
SPEAKER OUTPUT
Dynamic Range
Signal-to-Noise Ratio
THD + N
Interchannel Isolation
Interchannel Phase Deviation
Digital Volume Control
Step
Range
DIGITAL INPUT→ DAC → MIXER →
EARPIECE OUTPUT
Dynamic Range
Signal-to-Noise Ratio
THD + N
Full-Scale Output Voltage
Digital Volume Control
Step
Range
REFERENCE
Common-Mode Reference Output
CHARGE PUMP
Supply Voltage
Outputs
CPVDD
Below Supply Switching Threshold
Above Supply Switching Threshold
CPVSS
Below Supply Switching Threshold
Above Supply Switching Threshold
Switching Frequency
Flying Capacitor Value
Supply Switching Threshold
Start-Up Time
PLLx
Input Frequency
Lock Time (Analog PLL)
Jitter (Cycle-to-Cycle) rms
Test Conditions/Comments
20 Hz to 20 kHz, −60 dBFS input, unweighted (rms)
20 Hz to 20 kHz, −60 dBFS input, A-weighted (rms)
20 Hz to 20 kHz, A-weighted, relative to full scale
At −1 dBFS, 1 kHz
20 Hz to 20 kHz, −60 dBFS input, unweighted (rms)
20 Hz to 20 kHz, −60 dBFS input, A-weighted (rms)
20 Hz to 20 kHz, A-weighted, relative to full scale
At −1 dBFS, 1 kHz
Scales linearly with SPKVDD; SPKVDD = 3.6 V
CM pin
1.62
0.47
Typ
Max
Unit
93
96
97
0.01
100
0.1
dB
dB
dB
%
dB
Degrees
0.375
95
dB
dB
93
96
97
0.1
1.53
dB
dB
dB
%
V rms
0.375
95
dB
dB
AVDD/2
V
1.8
1.98
V
0.9
1.8
V
V
−0.9
−1.8
500
1
0.4
0.5
V
V
kHz
μF
V
ms
0.008
10
3
27
MHz
ms
470
280
200
ps
ps
ps
310
260
310
210
ps
ps
ps
ps
Measured at GPIOx with master clock output set at 256 × fS
(12.288 MHz, where fS = 48 kHz)
Analog PLL Only (DPLL Bypassed)
8 MHz Input (Fractional Mode)
27 MHz Input (Fractional Mode)
12.288 MHz Input (Integer Mode)
Digital PLL + Analog PLL
8 kHz LRCLKx Input
96 kHz LRCLKx Input
512 kHz (8 kHz × 64) BCLKx Input
2.048 MHz (8 kHz × 256) MCLKx
Input
MCLKx Clock Output Frequency
GPIOx
Drive Capability
Min
49.152
IOVDDx = 1.8 V
IOVDDx = 3.3 V
4
20
Rev. 0 | Page 13 of 296
MHz
mA
mA
ADAU1373
Parameter
IRQ RESPONSE TIME
ASRCx_IRQ_STATUS
Test Conditions/Comments
One clock cycle = 1/256 × fS = 81.4 ns at fS = 48 kHz
Typ
4
3
DRC_IRQ_STATUS, PLL_UNLOCK_STATUS
HP_CFG_STATUS, HP_DECT_STATUS,
AFAULT_STATUS
JACK DETECT
Debounce Time
DIGITAL MICROPHONE INPUT
Clock Output Frequency
Decimator Operating Frequency
Min
256 ms + 3
Depends on internal sample rate = 64 × fS
Depends on internal sample rate = 128 × fS
Rev. 0 | Page 14 of 296
Max
Unit
Clock
cycles
Clock
cycles
Clock
cycles
128
ms
3.072
6.144
MHz
MHz
ADAU1373
POWER CONSUMPTION
Table 3 lists some commonly used paths, as well as the typical current that is consumed by the part under quiescent conditions. The total
power consumed includes the power in the loads, as specified. TA = 25°C, line output load = 10 kΩ, headphone stereo = 16 Ω, speaker
load = 8 Ω + 33 μH, and earpiece = 32 Ω, audio port configured as the slave, fS = 48 kHz, MCLK = 12.288 MHz, unless otherwise specified.
Table 3.
Mode
POWER-DOWN
No Clocks
MCLKx = 12.288 MHz
POWER-UP
No Clocks (Default State)
MCLKx = 12.288 MHz,
PLL Bypassed
With Clocks (PLL Enabled,
LRCLKA = 48 kHz,
DPLL + APLL Enabled,
Master Mode)
ANALOG BYPASS
(NO CLOCKS)
Analog Input → Line
Output
Analog Input →
Headphone Output
Analog Input →
Speaker Output (Mono)
Analog Input →
Speaker Output (Stereo)
Analog Input →
Earpiece Output
AVDD
(V)
DVDD
(V)
HPVDD
(V)
SPKVDD
(V)
IOVDD
(V)
IAVDD
(mA)
IDVDD
(mA)
IHPVDD
(mA)
ISPKVDD
(mA)
IIOVDD
(mA)
Total
Power
(mW)
1.62
1.8
1.8
1.98
1.62
1.8
1.8
1.98
1.08
1.2
1.2
1.98
1.08
1.2
1.2
1.98
1.62
1.8
1.8
1.98
1.62
1.8
1.8
1.98
2.5
3.6
4.2
5.5
2.5
3.6
4.2
5.5
1.62
1.8
1.8
3.63
1.62
1.8
1.8
3.63
0.008
0.012
0.0124
0.0178
0.032
0.0378
0.0378
0.045
0.01
0.011
0.011
0.0149
0.19
0.22
0.22
0.4
0.001
0.0014
0.0015
0.002
0.001
0.0014
0.0015
0.002
0.0014
0.0035
0.0055
0.0147
0.0014
0.0035
0.0055
0.0147
0.008
0.008
0.008
0.008
0.017
0.017
0.017
0.017
0.04184
0.06432
0.07572
0.178596
0.2897
0.37776
0.38844
1.02762
1.62
1.8
1.8
1.98
1.62
1.8
1.8
1.98
1.62
1.8
1.8
1.98
1.08
1.2
1.2
1.98
1.08
1.2
1.2
1.98
1.08
1.2
1.2
1.98
1.62
1.8
1.8
1.98
1.62
1.8
1.8
1.98
1.62
1.8
1.8
1.98
2.5
3.6
4.2
5.5
2.5
3.6
4.2
5.5
2.5
3.6
4.2
5.5
1.62
1.8
1.8
3.63
1.62
1.8
1.8
3.63
1.62
1.8
1.8
3.63
0.31
0.32
0.32
0.34
0.34
0.35
0.35
0.37
1.77
1.83
1.83
1.91
0.046
0.0495
0.0495
0.083
0.23
0.256
0.256
0.47
1.06
1.26
1.26
2.34
0.0012
0.0018
0.0018
0.0023
0.0013
0.0018
0.0018
0.0023
0.0013
0.0018
0.0018
0.0023
0.041
0.065
0.079
0.118
0.041
0.065
0.079
0.118
0.041
0.065
0.079
0.118
0.008
0.008
0.008
0.008
0.017
0.017
0.017
0.017
1.72
1.72
1.72
1.72
0.669284
0.88704
0.98484
1.520134
0.931346
1.20504
1.30284
2.378464
6.903206
8.13924
8.23704
15.31215
1.62
1.8
1.8
1.98
1.62
1.8
1.8
1.98
1.62
1.8
1.8
1.08
1.2
1.2
1.98
1.08
1.2
1.2
1.98
1.08
1.2
1.2
1.62
1.8
1.8
1.98
1.62
1.8
1.8
1.98
1.62
1.8
1.8
2.5
3.6
4.2
5.5
2.5
3.6
4.2
5.5
2.5
3.6
4.2
1.62
1.8
1.8
3.63
1.62
1.8
1.8
3.63
1.62
1.8
1.8
1.62
1.66
1.66
1.72
1.33
1.35
1.35
1.37
1.44
1.46
1.47
0.045
0.049
0.049
0.083
0.045
0.05
0.05
0.083
0.045
0.05
0.05
0.0012
0.0018
0.0018
0.0023
1.35
1.37
1.37
1.39
0.0012
0.0018
0.0018
0.041
0.068
0.086
0.128
0.041
0.065
0.079
0.118
3.58
4.47
4.92
0.008
0.008
0.008
0.008
0.008
0.008
0.008
0.008
0.008
0.008
0.008
2.790404
3.30924
3.42564
4.307534
4.50566
5.2044
5.3022
6.30718
11.3463
18.79764
23.38764
1.98
1.62
1.8
1.8
1.98
1.62
1.8
1.8
1.98
1.98
1.08
1.2
1.2
1.98
1.08
1.2
1.2
1.98
1.98
1.62
1.8
1.8
1.98
1.62
1.8
1.8
1.98
5.5
2.5
3.6
4.2
5.5
2.5
3.6
4.2
5.5
3.63
1.62
1.8
1.8
3.63
1.62
1.8
1.8
3.63
1.49
1.98
2.02
2.01
2.04
0.89
0.91
0.91
0.92
0.083
0.045
0.05
0.05
0.083
0.045
0.049
0.049
0.083
0.0023
0.0012
0.0018
0.0018
0.0023
0.0012
0.0018
0.0018
0.0023
5.94
5.67
7.17
7.99
9.77
0.82
0.9
0.94
1.07
0.008
0.008
0.008
0.008
0.008
0.008
0.008
0.008
0.008
35.81813
17.4461
29.52564
37.25364
57.97213
3.555304
4.95444
5.66244
7.904534
Rev. 0 | Page 15 of 296
ADAU1373
Mode
RECORD PATH
(MCLK = 12.288 MHz)
Analog Input → ADC →
Digital Audio Interface A
Digital Microphone
Input → Decimator →
Digital Audio Interface A
PLAYBACK PATH
Digital Input → DAC →
Line Output
Digital Input → DAC →
Headphone Output
Digital Input → DAC →
Speaker Output
Digital Input → DAC →
Earpiece Output
AVDD
(V)
DVDD
(V)
HPVDD
(V)
SPKVDD
(V)
IOVDD
(V)
IAVDD
(mA)
IDVDD
(mA)
IHPVDD
(mA)
ISPKVDD
(mA)
IIOVDD
(mA)
Total
Power
(mW)
1.62
1.8
1.8
1.98
1.62
1.8
1.8
1.98
1.08
1.2
1.2
1.98
1.08
1.2
1.2
1.98
1.62
1.8
1.8
1.98
1.62
1.8
1.8
1.98
2.5
3.6
4.2
5.5
2.5
3.6
4.2
5.5
1.62
1.8
1.8
3.63
1.62
1.8
1.8
3.63
2.73
3.42
3.4
3.78
0.038
0.044
0.044
0.05
0.73
0.64
0.64
1.15
0.59
0.655
0.655
1.18
0.0014
0.0018
0.0018
0.0023
0.0012
0.0018
0.0018
0.0023
0.041
0.065
0.079
0.0118
0.041
0.065
0.079
0.0118
0.017
0.017
0.017
0.017
0.017
0.017
0.017
0.017
5.343308
7.19184
7.25364
9.892564
0.830744
1.13304
1.23084
2.566564
1.62
1.8
1.8
1.98
1.62
1.8
1.8
1.98
1.62
1.8
1.8
1.98
1.62
1.8
1.8
1.08
1.2
1.2
1.98
1.08
1.2
1.2
1.98
1.08
1.2
1.2
1.98
1.08
1.2
1.2
1.62
1.8
1.8
1.98
1.62
1.8
1.8
1.98
1.62
1.8
1.8
1.98
1.62
1.8
1.8
2.5
3.6
4.2
5.5
2.5
3.6
4.2
5.5
2.5
3.6
4.2
5.5
2.5
3.6
4.2
1.62
1.8
1.8
3.63
1.62
1.8
1.8
3.63
1.62
1.8
1.8
3.63
1.62
1.8
1.8
2.62
2.82
2.82
2.92
2.44
2.51
2.51
2.59
3.09
3.18
3.18
3.27
1.97
2.06
2.06
0.045
0.82
0.82
1.486
0.73
0.82
0.82
1.49
0.732
0.82
0.82
1.49
0.66
0.74
0.74
0.0012
0.0018
0.0018
0.0023
1.35
1.37
1.37
1.39
0.0013
0.0018
0.0018
0.0023
0.0012
0.0018
0.0018
0.041
0.068
0.086
0.128
0.041
0.068
0.086
0.128
5.68
7.17
7.97
9.73
0.82
0.897
0.94
0.017
0.017
0.017
0.017
0.017
0.017
0.017
0.017
0.017
0.017
0.017
0.017
0.017
0.017
0.017
4.424984
6.33864
6.45504
9.494144
7.05824
8.2434
8.3598
11.59631
20.02601
32.55384
40.21584
63.00606
5.983684
7.85904
8.57784
Rev. 0 | Page 16 of 296
ADAU1373
DIGITAL FILTER/SRC CHARACTERISTICS
Table 4.
Parameter
ADC DECIMATION FILTER
Pass Band
Pass-Band Ripple
Stop Band
Stop-Band Attenuation
Group Delay [1950/(128 × fS)]
DAC INTERPOLATION FILTER
Pass Band
Pass-Band Ripple
Stop Band
Stop-Band Attenuation
Group Delay [1791/(128 × fS)]
SAMPLE RATE CONVERTER
Pass Band
Pass-Band Ripple
Stop Band
Stop-Band Attenuation
Output/Input Sample Rate Ratio
Signal-to-Noise Ratio, A-weighted
Dynamic Range, A-weighted
THD + N
Maximum Group Delay
Maximum Start-Up Time
Test Conditions/Comments
Min
±0.04 dB
−6 dB
0
Typ
Max
Unit
0.423 fS
Hz
Hz
dB
Hz
dB
ms
0.5 fS
±0.04
0.577 fS
−60
f > 0.577 fS
fS = 48 kHz
0.317
±0.03 dB
−6 dB
0
0.423 fS
0.5 fS
±0.03
0.577 fS
−60
f > 0.577 fS
fS = 48 kHz
0.292
0.04 dB
−6 dB
0
0.418 fS
0.5 fS
0.02
0.582 fS
−100
1:8
f > 0.582 fS
Hz
Hz
dB
Hz
dB
8:1
100
100
90
48 kHz in, 8 kHz out
48 kHz in, 8 kHz out
Hz
Hz
dB
Hz
dB
ms
120
3.7
15
dB
dB
dB
ms
ms
DIGITAL INPUT/OUTPUT SPECIFICATIONS
Table 5.
Parameter
INPUT SPECIFICATIONS
Input Voltage High (VIH)
Input Voltage Low (VIL)
Input Leakage
OUTPUT SPECIFICATIONS
High Output Voltage High (VOH)
Output Voltage Low (VOL)
INPUT CAPACITANCE
Test
Conditions/Comments
Min
Typ
Max
Unit
0.25 × IOVDD
10
10
V
V
μA
μA
0.4
5
V
V
pF
0.6 × IOVDD
IIH at VIH = 2.4 V
IIL at VIL = 0.8 V
IOH = 1 mA
IOL = 1 mA
IOVDD − 0.6
Rev. 0 | Page 17 of 296
ADAU1373
DIGITAL TIMING SPECIFICATIONS
−40°C < TA < +85°C, IOVDDx = 1.8 V ± 10%.
Table 6.
Parameter
MASTER CLOCK
Duty Cycle
SERIAL PORT
tBIL
tBIH
tLIS
tLIH
tSIS
tSIH
tSODM
2
I C PORT
fSCL
tSCLH
tSCLL
tSCS
tSCH
tDS
tDH
tSCR
tSCF
tSDR
tSDF
tBFT
DIGITAL MICROPHONE
tDCF
tDCR
tDDV
tDDH
tMIN
45
Limit
tMAX
Description
55
%
50
ns
ns
ns
ns
ns
ns
ns
BCLKx pulse width low
BCLKx pulse width high
LRCLKx setup; time to BCLK rising
LRCLKx hold; time from BCLK rising
DAC_SDATA setup; time to BCLK rising
DAC_SDATA hold; time from BCLK rising
ADC_SDATA delay; time from BCLK falling in master mode
kHz
μs
μs
μs
μs
ns
ns
ns
ns
ns
ns
μs
SCL frequency
SCL high
SCL low
Setup time; relevant for repeated start condition
Hold time; after this period of time, the first clock is generated
Data setup time
Data hold time
SCL rise time
SCL fall time
SDA rise time
SDA fall time
Bus-free time; time between stop and start
RL = 1 MΩ, CL = 14 pF
Digital microphone clock fall time
Digital microphone clock rise time
Digital microphone delay time for valid data
Digital microphone delay time for data, three-stated
5
5
5
5
5
5
400
0.6
1.3
0.6
0.6
100
5
300
300
300
300
0.6
22
0
Unit
10
10
30
12
ns
ns
ns
ns
Rev. 0 | Page 18 of 296
ADAU1373
Digital Timing Diagrams
tLIH
tBIH
BCLKx
tBIL
tLIS
LRCLKx
tSIS
DAC_SDATA
LEFT-JUSTIFIED
MODE
MSB
MSB – 1
tSIH
tSIS
DAC_SDATA
I2S MODE
MSB
tSIH
tSIS
tSIS
DAC_SDATA
RIGHT-JUSTIFIED
MODE
LSB
MSB
tSIH
tSIH
8-BIT CLOCKS
(24-BIT DATA)
12-BIT CLOCKS
(20-BIT DATA)
08975-003
14-BIT CLOCKS
(18-BIT DATA)
16-BIT CLOCKS
(16-BIT DATA)
Figure 2. Serial Input Port Timing
tBIH
BCLKx
tBIL
LRCLKx
ADC_SDATA
LEFT-JUSTIFIED
MODE
tSODM
MSB
MSB – 1
tSODM
ADC_SDATA
I2S MODE
MSB
tSODM
ADC_SDATA
RIGHT-JUSTIFIED
MODE
MSB
LSB
8-BIT CLOCKS
(24-BIT DATA)
12-BIT CLOCKS
(20-BIT DATA)
08975-004
14-BIT CLOCKS
(18-BIT DATA)
16-BIT CLOCKS
(16-BIT DATA)
Figure 3. Serial Output Port Timing
Rev. 0 | Page 19 of 296
ADAU1373
tDS
tSCH
tSCH
SDA
tDH
tSCLH
SCL
tSCLL
tSCF
tSCS
tBFT
Figure 4. I2C Port Timing
tDCF
tDCR
DMIC_CLK
DMIC1_2_DATA
DATA1
DATA2
tDDH
tDDV
DATA1
Figure 5. Digital Microphone Timing
Rev. 0 | Page 20 of 296
DATA2
08975-005
tDDV
tDDH
08975-024
tSCR
ADAU1373
ABSOLUTE MAXIMUM RATINGS
THERMAL RESISTANCE
Table 7.
Parameter
Power Supply
SPKVDD, IOVDDx
DVDD, AVDD
HPVDD
Analog Input Voltage (Signal Pins)
AIN4R/AIN4N, AIN3R/AIN3N,
AIN2R/AIN2N, AIN1R/AIN1N,
AIN4L/AIN4P, AIN3L/AIN3P,
AIN2L/AIN4P, AIN1L/AIN1P
Digital Input Voltage (Signal Pins)
MCLK1, BCLKA, LRCLKA, SDATAINA,
GPIO1
MCLK2, BCLKB, LRCLKB, SDATAINB,
GPIO2
BCLKC, LRCLKC, SDATAINC, GPIO3
DMIC1_2_DATA, DMIC3_4_DATA,
DMIC_CLK
SDA, SCL, GPIO4, MODE, ADDR, SD
Temperature
Operating Range
Storage Range
Junction Range
Lead Temperature (Soldering, 60 sec)
θJA is specified for the worst-case conditions, that is, a device
soldered in a circuit board for surface-mount packages.
Rating
−0.3 V to +5.5 V
−0.3 V to +1.98 V
−0.3 V to +1.98 V
Table 8. Thermal Resistance
Package Type
81-Lead, 4.0 mm × 3.8 mm WLCSP1
–0.3 V to AVDD + 0.3 V
1
θJA
30
Unit
°C/W
Applicable for a 4-layer board. For more information on the WLCSP, see
the AN-617 Application Note, MicroCSP Wafer Level Chip Scale Package.
ESD CAUTION
–0.3 V to IOVDD1 + 0.3 V
–0.3 V to IOVDD2 + 0.3 V
–0.3 V to IOVDD3 + 0.3 V
–0.3 V to IOVDD4 + 0.3 V
–0.3 V to IOVDD5 + 0.3 V
−40°C to +85°C
−65°C to +150°C
−65°C to +165°C
300°C
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Rev. 0 | Page 21 of 296
ADAU1373
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
BALL A1
CORNER
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
G
H
TOP VIEW
(BALL SIDE DOWN)
Not to Scale
08975-006
J
Figure 6. Pin Configuration
Table 9. Pin Function Descriptions
Pin
No.
A1
A2
A3
Mnemonic
DGND
MODE
IOVDD4
Type
PWR
D_IN
PWR
A4
A5
A6
A7
A8
A9
DMIC_CLK
AIN4R/AIN4N
AIN3R/AIN3N
AIN2R/AIN2N
AIN1R/AIN1N
AVDD
D_OUT
A_IN
A_IN
A_IN
A_IN
PWR
B1
B2
B3
DVDD
ADDR
IOVDD5
PWR
D_IN
PWR
B4
B5
B6
B7
B8
B9
DMIC1_2_DATA
AIN4L/AIN4P
AIN3L/AIN3P
AIN2L/AIN2P
AIN1L/AIN1P
CM
D_IN
A_IN
A_IN
A_IN
A_IN
A_OUT
Description
Digital Ground. The AGND and DGND pins must be tied directly together in a common ground plane.
Mode Select I2C Operation. Must be pulled low for I2C mode.
Supply for Digital Microphone Input Port. Set IOVDD4 between 1.8 V and 3.3 V and decouple to
DGND using a 100 nF capacitor.
Clock Output for Digital Microphone.
Right Channel Input 4 (AIN4R)/Inverting Input 4 (AIN4N).
Right Channel Input 3 (AIN3R)/Inverting Input 3 (AIN3N).
Right Channel Input 2 (AIN2R)/Inverting Input 2 (AIN2N).
Right Channel Input 1 (AIN1R)/Inverting Input 1 (AIN1N).
1.5 V to 1.8 V Analog Supply for DAC and Microphone Bias. Decouple this pin to AGND using a 100 nF
capacitor.
Digital Core Supply. Decouple this pin to DGND with a 100 nF capacitor.
Address Setting Pin for I2C Port. Pull high/low to IOVDD4, using a resistor for the desired chip address.
Supply for I2C Port. Set IOVDD5 between 1.8 V and 3.3 V and decouple to DGND using a 100 nF
capacitor.
Serial Data Input Digital Microphone 1 and Serial Data Input Digital Microphone 2.
Left Channel Input 4 (AIN4L)/Noninverting Input 4 (AIN4P).
Left Channel Input 3 (AIN3L)/Noninverting Input 3 (AIN3P).
Left Channel Input 2 (AIN2L)/Noninverting Input 2 (AIN2P).
Left Channel Input 1 (AIN1L)/Noninverting Input 1 (AIN1P).
AVDD/2 V Common-Mode Reference. Connect a 1 μF ceramic decoupling capacitor between this
pin and ground to reduce crosstalk between the ADCs and DACs. This pin can be used to bias
external analog circuits, as long as they are not drawing current from CM (for example, the
noninverting input of an op amp).
Rev. 0 | Page 22 of 296
ADAU1373
Pin
No.
C1
Mnemonic
IOVDD1
Type
PWR
C2
C3
C4
C5
C6
C7
MCLK1
SDA
GPIO4
SCL
DMIC3_4_DATA
LOUT1L/LOUTLP
D_IN
D_I/O
D_I/O
D_IN
D_IN
A_OUT
C8
C9
D1
D2
D3
D4
D5
D6
D7
MICBIAS1
MICBIAS2
MCLK2
BCLKA
LRCLKA
SDATAOUTA
SDATAINA
GPIO1
LOUT1R/LOUTRP
A_OUT
A_OUT
D_IN
D_I/O
D_I/O
D_OUT
D_IN
D_I/O
A_OUT
D8
LOUT2L/LOUTLN
A_OUT
D9
LOUT2R/LOUTRN
A_OUT
E1
IOVDD3
PWR
E2
E3
E4
E5
E6
E7
LRCLKB
SDATAOUTB
BCLKB
DGND
GPIO2
LN1FBIN
D_I/O
D_OUT
D_I/O
PWR
D_I/O
A_IN
E8
LN2FBIN
A_IN
E9
AVDD
PWR
F1
F2
F3
F4
LRCLKC
BCLKC
SDATAINC
IOVDD2
D_I/O
D_I/O
D_IN
PWR
F5
F6
F7, F8
F9
G1, G2
G3
G4
G5
G6
G7
G8
G9
GPIO3
SDATAINB
AGND
RESERVED
SPKVDD
SDATAOUTC
RESERVED
JACKDET
SD
SGND
HPL
HPR
D_I/O
D_IN
PWR
A_IN
PWR
D_OUT
D_IN
D_IN
D_IN
A_IN
A_OUT
A_OUT
Description
Supply for Digital Audio Input/Output Interface A. Set IOVDD1 between 1.8 V and 3.3 V. Decouple this
pin to DGND with a 100 nF capacitor.
External Master Clock Input 1 (8 kHz to 27 MHz).
Serial Data for I2C. This pin is a bidirectional open drain and must be pulled up to IOVDD5 with a resistor.
General-Purpose Input/Output 4.
Serial Clock for I2C Port. This pin is input only and must be pulled up to IOVDD5 with a resistor.
Serial Data Input Digital Microphone 3 and Serial Data Input Digital Microphone 4.
Left Channel Line Output 1, Single-Ended Mode (LOUT1L)/Noninverting Left Channel Line Output,
Differential Mode (LOUTLP).
Bias Voltage for Electret Microphone 1.
Bias Voltage for Electret Microphone 2.
External Master Clock Input 2 (8 kHz to 27 MHz).
Serial Bit Clock, Digital Audio Interface A.
Frame Clock, Digital Audio Interface A.
Serial Data Output, Digital Audio Interface A.
Serial Data Input, Digital Audio Interface A.
General-Purpose Input/Output 1.
Right Channel Line Output 1, Single-Ended Mode (LOUT1R)/Noninverting Right Channel Line
Output, Differential Mode (LOUTRP).
Left Channel Line Output 2, Single-Ended Mode (LOUT2L)/Inverting Left Channel Line Output,
Differential Mode (LOUTLN).
Right Channel Line Output 2, Single-Ended Mode (LOUT2R)/Inverting Right Channel Line Output,
Differential Mode (LOUTRN).
Supply for Digital Audio Input/Output Interface C. Set IOVDD3 between 1.8 V and 3.3 V and
decouple to DGND with a 100 nF capacitor.
Frame Clock, Digital Audio Interface B.
Serial Data Output, Digital Audio Interface B.
Serial Bit Clock, Digital Audio Interface B.
Digital Ground. The AGND and DGND pins must be tied directly together in a common ground plane.
General-Purpose Input/Output 2.
Line Output Amplifier 1 Feedback. This pin can be used to sense the ground noise at the line output
jack; use a 2.2 μF capacitor to connect this pin to AGND at the line output jack.
Line Output Amplifier 2 Feedback. This pin can be used to sense the ground noise at the line output
jack; use a 2.2 μF capacitor to connect this pin to AGND at the line output jack.
1.5 V to 1.8 V Analog Supply for DAC and Microphone Bias. Decouple this pin to AGND with a 100 nF
capacitor in parallel with a 10 μF capacitor.
Frame Clock, Digital Audio Interface C.
Serial Bit Clock, Digital Audio Interface C.
Serial Data Input, Digital Audio Interface C.
Supply for Digital Audio Input/Output Interface B. Set IOVDD2 between 1.8 V and 3.3 V and
decouple to DGND with a 100 nF capacitor.
General-Purpose Input/Output 3.
Serial Data Input, Digital Audio Interface B.
Analog Ground.
Reserved for Internal Use. Do not connect.
Supply for Speaker Class-D Amplifier.
Serial Data Output, Digital Audio Interface C.
Reserved. Connect to DGND.
TLL-Compatible Logic Input. Detects insertion/removal of headphone plug.
Shutdown Control. Set high for normal operation; set low for full chip power-down.
Headphone Signal Return Sense. Connect directly to headphone socket ground for lowest dc offset.
Left Headphone Output.
Right Headphone Output.
Rev. 0 | Page 23 of 296
ADAU1373
Pin
No.
H1
H2, H3
H4, H5
H6
H7
Mnemonic
SPKRN
SPKVDD
SPKGND
EPP
CPVSS
Type
A_OUT
PWR
PWR
A_OUT
PWR
H8
HPVDD
PWR
H9
CPVDD
PWR
J1
J2
J3
J4
J5
J6
J7
J8
J9
SPKGND
SPKRP
SPKLN
SPKLP
SPKGND
EPN
CF2
HPGND
CF1
PWR
A_OUT
A_OUT
A_OUT
PWR
A_OUT
PWR
PWR
PWR
Description
Right Channel Speaker Output, Negative.
Supply for Speaker Amplifier.
Ground for Speaker Amplifier.
Earpiece Amplifier Output, Positive.
Headphone Amplifier Charge Pump, Negative Supply Output. Decouple this pin to HPGND with
a 1 μF MLCC X7R capacitor.
1.62 V to 2 V Supply for Headphone Amplifier Charge Pump. Decouple this pin to AGND with a 1 μF
capacitor.
Headphone Amplifier Charge Pump, Positive Supply Output. Decouple this pin to HPGND with a 1 μF
MLCC X7R capacitor.
Ground for Speaker Amplifier.
Right Channel Speaker Output, Positive.
Left Channel Speaker Output, Negative.
Left Channel Speaker Output, Positive.
Ground for Speaker Amplifier.
Earpiece Amplifier Output, Negative.
Charge Pump Flying Capacitor Connection 2.
Charge Pump Ground.
Charge Pump Flying Capacitor Connection 1.
Rev. 0 | Page 24 of 296
ADAU1373
TYPICAL PERFORMANCE CHARACTERISTICS
0
10
–10
–20
–30
1
–50
THD + N (%)
AMPLITUDE (dBr)
–40
–60
–70
–80
–90
0.1
–100
0.01
–110
–120
2.5
5.0
7.5
10.0
12.5
15.0
17.5
20.0
FREQUENCY (kHz)
0.001
08975-050
0
100
1k
08975-053
–130
–140
10k
FREQUENCY (Hz)
Figure 7. FFT, −60 dBFS, Analog In → Line Out
Figure 10. THD + N vs. Frequency, −20 dBFS, Analog In → Line Out
0
–17
–10
–20
–18
–30
–19
AMPLITUDE (dBr)
AMPLITUDE (dBr)
–40
–50
–60
–70
–80
–90
–20
–21
–100
–110
–22
–120
2.5
5.0
7.5
10.0
12.5
15.0
17.5
FREQUENCY (kHz)
20.0
–23
08975-051
0
100
1k
08975-054
–130
–140
10k
FREQUENCY (Hz)
Figure 11. Frequency Response, −20 dBFS, Analog In → Line Out
Figure 8. FFT, −1 dBFS, Analog In → Line Out
10
0
–20
AMPLITUDE (dBr)
THD + N (%)
1
0.1
–40
–60
–80
–100
0.01
–140
1
10
100
OUTPUT (mV)
08975-052
0.001
0
2.5
5.0
7.5
10.0
12.5
15.0
17.5
FREQUENCY (kHz)
Figure 12. FFT, −60 dBFS, Analog In → Speaker Out
Figure 9. THD + N vs. Output Level, Analog In → Line Out
Rev. 0 | Page 25 of 296
20.0
08975-055
–120
ADAU1373
0
10
–20
1
THD + N (%)
AMPLITUDE (dBr)
–40
–60
–80
0.1
–100
0.01
0
2.5
5.0
7.5
10.0
12.5
15.0
17.5
20.0
FREQUENCY (kHz)
0.001
08975-056
–140
100
1k
08975-059
–120
10k
FREQUENCY (Hz)
Figure 16. THD + N vs. Frequency, −20 dBFS, Analog In → Speaker Out
Figure 13. FFT, −1 dBFS, Analog In → Speaker Out
10
–17.0
–17.5
–18.0
–18.5
AMPLITUDE (dBr)
THD + N (%)
1
0.1
0.01
–19.0
–19.5
–20.0
–20.5
–21.0
–21.5
–22.0
100m
–23.0
08975-057
10m
1
OUTPUT POWER (W)
100
1k
08975-060
–22.5
0.001
1m
10k
FREQUENCY (Hz)
Figure 14. THD + N vs. Output Power, 4 Ω + 15 μH, Analog In → Speaker Out
Figure 17. Frequency Response, 8 Ω + 33 μH, Analog In → Speaker Out
10
–20
–40
AMPLITUDE (dBr)
THD + N (%)
1
0.1
–60
–80
–100
0.01
–140
10m
100m
OUTPUT POWER (W)
1
08975-058
0.001
1m
Figure 15. THD + N vs. Output Power, 8 Ω + 33 μH, Analog In → Speaker Out
Rev. 0 | Page 26 of 296
0
2.5
5.0
7.5
10.0
12.5
15.0
17.5
FREQUENCY (kHz)
Figure 18. FFT, −60 dBFS, Analog In → Headphone Out
20.0
08975-061
–120
ADAU1373
0
10
–20
1
THD + N (%)
AMPLITUDE (dBr)
–40
–60
–80
0.1
–100
0.01
0
2.5
5.0
7.5
10.0
12.5
15.0
17.5
20.0
FREQUENCY (kHz)
0.001
08975-062
–140
100
1k
08975-065
–120
10k
FREQUENCY (Hz)
Figure 22. THD + N vs. Frequency, −20 dBFS,16 Ω, Analog In →
Headphone Out
Figure 19. FFT, −1 dBFS, Analog In → Headphone Out
–17.0
10
–17.5
–18.0
–18.5
AMPLITUDE (dBr)
THD + N (%)
1
0.1
–19.0
–19.5
–20.0
–20.5
–21.0
–21.5
0.01
–22.0
1m
10m
–23.0
08975-063
100
100m
OUTPUT POWER (W)
Figure 20. THD+N vs. Output Power, 16 Ω, Analog In → Headphone Out
100
1k
08975-066
–22.5
0.001
10
10k
FREQUENCY (kHz)
Figure 23. Frequency Response, −20 dBFS, 16 Ω, Analog In → Headphone Out
10
–20
–40
AMPLITUDE (dBr)
THD + N (%)
1
0.1
–60
–80
–100
0.01
–140
100µ
1m
OUTPUT POWER (W)
10m
08975-064
0.001
10µ
Figure 21. THD + N vs. Output Power, 32 Ω, Analog In → Headphone Out
Rev. 0 | Page 27 of 296
0
2.5
5.0
7.5
10.0
12.5
15.0
17.5
FREQUENCY (kHz)
Figure 24. FFT, −60 dBFS, Analog In → Earpiece Out
20.0
08975-067
–120
ADAU1373
0
–17.0
–17.5
–20
–18.0
–18.5
–40
AMPLITUDE (dBr)
AMPLITUDE (dBr)
–19.0
–19.5
–60
–20.0
–80
–20.5
–21.0
–100
–21.5
–22.0
–120
0
2.5
5.0
7.5
10.0
12.5
15.0
17.5
–23.0
08975-068
–140
20.0
FREQUENCY (kHz)
100
1k
08975-071
–22.5
10k
FREQUENCY (Hz)
Figure 25. FFT, −1 dBFS, Digital Microphone In → Earpiece Out
Figure 28. Frequency Response, 32 Ω, Analog In → Earpiece Out
10
0
–20
–40
THD + N (%)
AMPLITUDE (dBr)
1
0.1
–60
–80
–100
1m
10m
100m
OUTPUT POWER (W)
–140
08975-069
0.01
100µ
0
2.5
5.0
7.5
10.0
12.5
15.0
17.5
20.0
FREQUENCY (kHz)
08975-072
–120
Figure 29. FFT, −60 dBFS, Digital In → Line Out
Figure 26. THD + N vs. Output Power, 32 Ω, Analog In → Earpiece Out
0
10
–20
–40
AMPLITUDE (dBr)
THD + N (%)
1
0.1
–60
–80
–100
0.01
–140
100
1k
FREQUENCY (Hz)
10k
08975-070
0.001
Figure 27. THD + N vs. Frequency, −20 dBFS, 32 Ω, Analog In → Earpiece Out
Rev. 0 | Page 28 of 296
0
2.5
5.0
7.5
10.0
12.5
15.0
17.5
FREQUENCY (kHz)
Figure 30. FFT, −1 dBFS, Digital In → Line Out
20.0
08975-073
–120
ADAU1373
–60
10
–65
–70
–75
1
–85
PSRR (dB)
THD + N (%)
–80
0.1
–90
–95
–100
–105
0.01
–110
100m
1
OUTPUT (W)
08975-074
10m
–120
100
1k
08975-136
–115
0.001
10k
FREQUENCY (Hz)
Figure 31. THD + N vs. Output Level, Digital In → Line Out
Figure 34. PSRR vs. Frequency Ripple on AVDD, Digital In → Line Out
0
10
–20
–40
AMPLITUDE (dBr)
THD + N (%)
1
0.1
–60
–80
–100
0.01
100
1k
10k
FREQUENCY (Hz)
–140
08975-075
0.001
0
2.5
5.0
7.5
10.0
12.5
15.0
17.5
20.0
FREQUENCY (kHz)
08975-077
–120
Figure 35. FFT, −60 dBFS, 8 Ω + 33 μH, Digital In → Speaker Out
Figure 32. THD+N vs. Frequency, −20 dBFS, Digital In → Line Out
–17
0
–20
–18
AMPLITUDE (dBr)
–20
–21
–60
–80
–100
–22
100
1k
10k
FREQUENCY (Hz)
–140
0
2.5
5.0
7.5
10.0
12.5
15.0
17.5
20.0
FREQUENCY (kHz)
Figure 36. FFT, −1 dBFS, 8 Ω + 33 μH, Digital In → Speaker Out
Figure 33. Frequency Response, −20 dBFS, Digital In → Line Out
Rev. 0 | Page 29 of 296
08975-078
–23
–120
08975-076
AMPLITUDE (dBr)
–40
–19
ADAU1373
10
–17
–18
AMPLITUDE (dBr)
THD + N (%)
1
0.1
–19
–20
–21
0.01
10m
100m
–23
08975-079
0.001
1m
1
OUTPUT POWER (W)
100
1k
08975-082
–22
10k
FREQUENCY (Hz)
Figure 40. Frequency Response, 8 Ω + 33 μH, Digital In → Speaker Out
Figure 37. THD + N vs. Output Power, 8 Ω + 33 μH, Digital In → Speaker Out
2.0
10
1.8
1.6
OUTPUT POWER (W)
THD + N (%)
1
0.1
0.01
1.4
1.2
10%
1.0
1%
0.8
0.6
0.4
10m
100m
0
2.5
08975-080
0.001
1m
1
OUTPUT POWER (W)
Figure 38. THD + N vs. Output Power, 4 Ω + 15 μH, Digital In → Speaker Out
3.0
3.5
4.0
4.5
5.0
SUPPLY VOLTAGE (V)
08975-118
0.2
Figure 41. Output Power vs. SPKVDD, 8 Ω + 33 μH (Stereo), Digital In →
Speaker Out
3.5
10
3.0
OUTPUT POWER (W)
THD + N (%)
1
0.1
0.01
2.5
2.0
10%
1%
1.5
1.0
100
1k
10k
FREQUENCY (Hz)
Figure 39. THD + N vs. Frequency, −20 dBFS, 8 Ω + 33 μH,
Digital In → Speaker Out
0
2.5
08975-081
0.001
3.0
3.5
4.0
SUPPLY VOLTAGE (V)
4.5
5.0
08975-119
0.5
Figure 42. Output Power vs. SPKVDD, 4 Ω + 15 μH (Stereo), Digital In →
Speaker Out
Rev. 0 | Page 30 of 296
ADAU1373
0
–50
–55
–20
–60
–65
–40
AMPLITUDE (dBr)
–70
PSRR (dB)
–75
–80
–85
–90
–95
–60
–80
–100
–100
–105
–120
–110
100
1k
10k
FREQUENCY (Hz)
–140
0
2.5
5.0
7.5
10.0
12.5
15.0
17.5
FREQUENCY (kHz)
20.0
08975-084
–120
08975-120
–115
Figure 46. FFT, −1 dBFS, 16 Ω, Digital In → Headphone Out
Figure 43. PSRR vs. Frequency Ripple on SPKVDD, 8 Ω + 33 μH,
Digital In → Speaker Out
10
100
90
80
1
60
THD + N (%)
EFFICIENCY (%)
70
50
40
0.1
30
0.01
0
0
200
400
600
800
1000
1200
1400
1600
OUTPUT POWER (mW)
08975-121
SPKVDD = 3.6V
SPKVDD = 4.2V
SPKVDD = 5V
10
Figure 44. Efficiency vs. Output Power, 8 Ω + 33 μH, Digital In → Speaker Out
0.001
10µ
100µ
1m
10m
OUTPUT POWER (W)
08975-085
20
Figure 47. THD + N vs. Output Power, 16 Ω, Digital In → Headphone Out
0
10
–20
1
THD + N (%)
–60
–80
–100
0.1
0.01
–140
0
2.5
5.0
7.5
10.0
12.5
15.0
17.5
20.0
FREQUENCY (kHz)
Figure 45. FFT, −60 dBFS, 16 Ω, Digital In → Headphone Out
0.001
10µ
100µ
1m
OUTPUT POWER (W)
10m
08975-086
–120
08975-083
AMPLITUDE (dBr)
–40
Figure 48. THD + N vs. Output Power, 32 Ω, Digital In → Headphone Out
Rev. 0 | Page 31 of 296
ADAU1373
–60
10
–65
–70
1
–75
–85
PSRR (dB)
THD + N (dB)
–80
0.1
–90
–95
–100
0.01
–105
–110
100
1k
10k
FREQUENCY (Hz)
–120
08975-087
0.001
100
08975-124
–115
10k
1k
FREQUENCY (Hz)
Figure 49. THD + N vs. Frequency, −20 dBFS,16 Ω, Digital In → Headphone Out
Figure 52. PSRR vs. Frequency, 16 Ω, Digital In →
Headphone Out
–17
60
–18
50
40
–19
AMPLITUDE (dBr)
30
1% THD + N
20
–20
–21
–22
10
1.72
1.82
1.92
SUPPLY VOLTAGE (V)
–23
100
08975-122
0
1.62
Figure 50. Output Power vs. HPVDD, 16 Ω, Digital In → Headphone Out
10k
FREQUENCY (Hz)
Figure 53. Frequency Response, −20 dBFS, 16 Ω, Digital In → Headphone Out
45
0
40
–20
35
10% THD + N
–40
30
25
AMPLITUDE (dBr)
OUTPUT POWER (mW)
1k
08975-088
OUTPUT POWER (mW)
10% THD + N
1% THD + N
20
15
–60
–80
–100
10
1.72
1.82
SUPPLY VOLTAGE (V)
1.92
08975-123
0
1.62
–140
Figure 51. Output Power vs. HPVDD, 32 Ω, Digital In → Headphone Out
Rev. 0 | Page 32 of 296
0
2.5
5.0
7.5
10.0
12.5
15.0
17.5
FREQUENCY (kHz)
Figure 54. FFT, −60 dBFS, 32 Ω, Digital In → Earpiece Out
20.0
08975-089
–120
15
ADAU1373
–17
0
–20
–18
–19
AMPLITUDE (dBr)
AMPLITUDE (dBr)
–40
–60
–80
–20
–21
–100
0
2.5
5.0
7.5
10.0
12.5
15.0
17.5
20.0
FREQUENCY (kHz)
–23
08975-090
–140
100
1k
08975-093
–22
–120
10k
FREQUENCY (Hz)
Figure 58. Frequency Response, 32 Ω, Digital In → Earpiece Out
Figure 55. FFT, −1 dBFS, 32 Ω, Digital In → Earpiece Out
45
10
40
OUTPUT POWER (W)
35
THD + N (%)
1
0.1
10%
30
25
1%
20
15
10
1µ
10µ
100µ
1m
10m
0
2.5
08975-091
0.01
100n
100m
OUTPUT POWER (W)
3.0
3.5
4.0
4.5
5.0
SUPPLY VOLTAGE (V)
08975-125
5
Figure 59. Output Power vs. SPKVDD, 32 Ω, Digital In → Earpiece Out
Figure 56. THD + N vs. Output Power, 32 Ω, Digital In → Earpiece Out
–50
10
–55
–60
–65
1
–70
PSRR (dB)
THD + N (%)
–75
0.1
–80
–85
–90
–95
–100
0.01
–105
–110
1k
FREQUENCY (Hz)
10k
–120
Figure 57. THD + N vs. Frequency, −20 dBFS, 32 Ω, Digital In → Earpiece Out
Rev. 0 | Page 33 of 296
100
1k
10k
FREQUENCY (Hz)
Figure 60. PSRR vs. Frequency, 32 Ω, Digital In → Earpiece Out
08975-126
100
08975-092
–115
0.001
0
–20
–60
CMRR (dB)
AMPLITUDE (dBr)
–40
–80
–100
–120
–140
–180
0
2.5
5.0
7.5
10.0
12.5
15.0
17.5
20.0
FREQUENCY (kHz)
08975-094
–160
0
–5
–10
–15
–20
–25
–30
–35
–40
–45
–50
–55
–60
–65
–70
–75
–80
–85
–90
–95
–100
–105
–110
–115
–120
100
1k
08975-143
ADAU1373
10k
FREQUENCY (Hz)
Figure 64. CMRR vs. Frequency, Analog In → Digital Out,
PGA Gain = 0 dB
Figure 61. FFT, −60 dBFS, Analog In → Digital Out, PGA Gain = 0 dB
–50
0
–55
–20
–60
–65
–40
–75
PSRR (dB)
–80
–100
–85
–90
–95
–120
–100
–140
–105
–110
–160
–115
0
2.5
5.0
7.5
10.0
12.5
15.0
17.5
20.0
FREQUENCY (kHz)
–120
08975-095
–180
–80
100
1k
08975-127
AMPLITUDE (dBr)
–70
–60
10k
FREQUENCY (Hz)
Figure 62. FFT, −1 dBFS, Analog In → Digital Out, PGA Gain = 0 dB
Figure 65. PSRR vs. Frequency Ripple on AVDD, Analog In →
Digital Out, PGA Gain = 0 dB
0
–17
–20
–18
AMPLITUDE (dBr)
–19
–20
–21
–60
–80
–100
–120
–140
–22
100
1k
10k
FREQUENCY (kHz)
–180
Figure 63. Frequency Response, −20 dBFS, Analog In →
Digital Out, PGA Gain = 0 dB
0
2.5
5.0
7.5
10.0
12.5
15.0
17.5
FREQUENCY (kHz)
Figure 66. FFT, −60 dBFS, Digital In → Digital Out
Rev. 0 | Page 34 of 296
20.0
08975-097
–23
–160
08975-096
AMPLITUDE (dBr)
–40
ADAU1373
0
0
–20
–20
–40
–60
–60
DNR (dB)
AMPLITUDE (dBr)
–40
–80
–100
–80
–120
–100
–140
5.0
7.5
10.0
12.5
15.0
17.5
20.0
FREQUENCY (kHz)
–140
THD + N (%)
THD + N (dB)
0.1
10k
FREQUENCY (Hz)
08975-099
0.01
1k
–20
–25
–30
–35
–40
–45
–50
–55
–60
–65
–70
–75
–80
–85
–90
–95
–100
–105
–110
–115
–120
–125
Figure 68. THD + N vs. Frequency, 0 dBFS, Digital In →
Digital Out
0
–20
–30
–40
THD + N (dB)
–60
–70
–80
–90
–100
–110
–120
–130
15.0
20.0
25.0
30.0
35.0
40.0
45.0
12.5
17.5
22.5
27.5
32.5
37.5
42.5
47.5
SAMPLE RATE FREQUENCY (kHz)
–20
–25
–30
–35
–40
–45
–50
–55
–60
–65
–70
–75
–80
–85
–90
–95
–100
–105
–110
–115
–120
–125
08975-100
DNR (dB)
–50
10.0
25
30
35
40
45
10.0
15.0
20.0
25.0
30.0
35.0
40.0
45.0
12.5
17.5
22.5
27.5
32.5
37.5
42.5
47.5
SAMPLE RATE FREQUENCY (kHz)
Figure 71. THD + N vs. fS Out Sample Rate, fS In = 8 kHz, ASRC
–10
–140
20
Figure 70. DNR vs. fS Out Sample Rate, fS In = 8 kHz, ASRC
1
100
15
SAMPLE RATE FREQUENCY (kHz)
Figure 67. FFT, −1 dBFS, Digital In → Digital Out
0.001
10
08975-102
2.5
Figure 69. DNR vs. fS Out Sample Rate, fS In = 8 kHz, ASRC
10.0
15.0
20.0
25.0
30.0
35.0
40.0
45.0
12.5
17.5
22.5
27.5
32.5
37.5
42.5
47.5
SAMPLE RATE FREQUENCY (kHz)
Figure 72. THD + N vs. fS Out Sample Rate, fS In = 48 kHz, ASRC
Rev. 0 | Page 35 of 296
08975-103
0
08975-098
–180
08975-101
–120
–160
ADAU1373
0
–20
AMPLITUDE (dBr)
–40
–60
–80
4
–100
–120
2.5
5.0
7.5
10.0
12.5
15.0
17.5
20.0
FREQUENCY (kHz)
A[W]: 1A
CH4 1V
DATA: 27
BW
DATA: 41
80µs
T
357.6µs
Figure 73. FFT, −60 dBFS, Analog In → ADC → DAC → Line Out
1.25GS/s
1M POINTS
B1 START
08975-138
0
08975-104
B1
–140
Figure 76. Turn Off Speaker Out
0
–20
–60
4
–80
–100
–120
5.0
7.5
10.0
12.5
15.0
17.5
20.0
FREQUENCY (kHz)
CH4 500mV
Figure 74. FFT, −1 dBFS, Analog In → ADC → DAC → Line Out
BW
4ms
25MS/s
T
16.7776ms 1M POINTS
B1 START
08975-139
2.5
08975-105
0
B1 START
08975-140
B1
–140
Figure 77. Turn On Headphone Out
4
4
B1
B1
CH4 1V
BW
1ms
T
4.264ms
100MS/s
1M POINTS
B1 START
08975-137
AMPLITUDE (dBr)
–40
CH4 500mV
BW
1ms
100MS/s
T
2.0176ms 1M POINTS
Figure 78. Turn Off Headphone Out
Figure 75. Turn On Speaker Out
Rev. 0 | Page 36 of 296
ADAU1373
4
4
CH4 500mV
1ms
100MS/s
T
1.4376ms 1M POINTS
B1 START
Figure 79. Turn On Earpiece Out
CH4 500mV
BW
1ms
100MS/s
T
3.69760ms 1M POINTS
Figure 80. Turn Off Earpiece Out
Rev. 0 | Page 37 of 296
B1 START
08975-142
B1
BW
08975-141
B1
ADAU1373
CHARGE
PUMP
PLLA
RESERVED (No connect)
AVDD
DVDD
HPVDD
SPKVDD
CM
CF1
CF2
CPVDD
CPVSS
DETAILED BLOCK DIAGRAM
POWER-ON
RESET
REFERENCE
LINEMIX
PLLB
IOVDD1
CH1
SDATAINA
CH2
GPIO1
GPIO1
MCLK1
MCLK1
MUX
MIX CH3
VOL
CH4
AIF CLKA
AIF CLKB
MDRC/DRC
SEVEN
BAND EQ
3D
BASS
ENHANCE
CH5
IOVDD2
SDATAOUTB
SERIAL
DIGITAL
AUDIO
INT.
B
CH1
CH2
MUX
CH3 MIX
VOL
CH4
ASRCB
SDATAINB
GPIO2
MCLK2
MCLK2
AIF CLKA
AIF CLKB
ADAU1373
IOVDD3
BCLKC
GPIO3
AIF CLKA
AIF CLKB
IOVDD5
MODE
ADDR
SCL
I2C
SDA
SD
GPIO4
DMIC1/DMIC2
OR
ADC DATA
LEFT
ADC
GPIO4
DECIMATOR
DMIC1/DMIC2 PDM DATA
HPGND
DMIC3/
DMIC4
SINGLE
DIFF
LN2FBIN
12dB
SPKLP
SPKLN
CLASS-D
–70dB TO 0dB
12dB
SPKRP
SPKRN
BSTEN
EPP
EPN
6dB TO 12dB
JACKDETECT LOGIC
CPVDD
CPVSS
–70dB TO 0dB
IN1L
IN1R
IN2L
IN2R
IN3L
IN3R
IN4L
IN4R
JACKDET
HPL
SGND
–70dB TO 0dB
HPR
MICBIAS2
MICBIAS1
MICBIAS2
MICBIAS1
IOUT
–12dB TO
+20dB
0dB TO
+20dB
–12dB TO
+20dB
0dB TO
+20dB
–12dB TO
+20dB
0dB TO
+20dB
–12dB TO
+20dB
0dB TO
+20dB
–12dB TO
+20dB
0dB TO
+20dB
–12dB TO
+20dB
0dB TO
+20dB
–12dB TO
+20dB
0dB TO
+20dB
–12dB TO
+20dB
SPKGND
DMIC1_2_DATA
DIGITAL
MIC
INTERFACE
DGND
DMIC_CLK
AGND
DMIC3_4_DATA
0dB TO
+20dB
RIGHT
ADC
IOVDD4
–70dB TO 0dB
–70dB TO 0dB
LOUT1L/
LOUTLP
LOUT1R/
LOUTRP
LN1FBIN
LOUT2L/
LOUTLN
LOUT2R/
LOUTRN
AIN1L/
AIN1P
AIN1R/
AIN1N
AIN2L/
AIN2P
AIN2R/
AIN2N
AIN3L/
AIN3P
AIN3R/
AIN3N
AIN4L/
AIN4P
AIN4R/
AIN4N
08975-001
GPIO3
RDAC2
LDAC2
RDAC1
LDAC1
ADCMIX
SDATAINC
RIGHT
DAC2
ASRCC
DECIMATOR
SDATAOUTC
SERIAL
DIGITAL
AUDIO
INT.
C
DMIC3/DMIC4-DATA
LRCLKC
DIFF
–70dB TO 0dB
LEFT
DAC2
DIGITAL ENGINE
GPIO2
SINGLE
RIGHT
DAC1
CH5
HPF
ALC
BCLKB
LRCLKB
LEFT
DAC1
ASRCA
SPEAKERMIX
SDATAOUTA
SERIAL
DIGITAL
AUDIO
INT.
A
RECEIVERMIX
LRCLKA
DSP
HEADPHONEMIX
BCLKA
–70dB TO 0dB
–70dB TO 0dB
Figure 81.
Rev. 0 | Page 38 of 296
ADAU1373
THEORY OF OPERATION
ANALOG INPUTS
Mono Differential Mode
The ADAU1373 provides four stereo (unbalanced)/mono
differential inputs. Each input gain and mode of operation can
be set independently, using the I2C registers. Figure 82 shows the
typical input block for the stereo and mono differential inputs in
the programmable gain amplifier (PGA) modes and boost modes.
In mono differential mode, the AINxL/AINxP pins are used as
positive inputs, and the AINxR/AINxN pins are used as negative
inputs for the differential amplifier.
Each input can receive either a microphone or a line level signal.
Each input can be set to either stereo single-ended mode or mono
differential mode. In addition, the gain for the input amplifiers
can be set to PGA mode or boost mode. In PGA mode, the gain
can be varied from −12 dB to +18 dB (in 1 dB steps); whereas in
boost mode, it can be varied using one of the following three steps:
0 dB, 9 dB, or 20 dB. In PGA mode, the input resistance varies
as per the gain, with a minimum of ~5.6 kΩ. In boost mode,
the input resistance is constant at ~20 kΩ.
Stereo Single-Ended Mode
In stereo single-ended mode, the AINxL/AINxP pins are used
as the left channel inputs, and the AINxR/AINxN pins are used
as the right channel inputs.
STEREO PGA MODE
AINxL
The input amplifers use AVDD as the supply voltage. The
AINxP/AINxN input pins are internally biased to AVDD/2,
which is the common-mode voltage for the amplifiers. The
common-mode pin (CM, Ball B9) must be decoupled using the
10 μF electrolytic capacitor, as well as a 100 nF, X7R ceramic
capacitor to keep the reference clean for lower noise. In addition,
the input pins must be provided with an ac coupling capacitor to
the desired source.
The typical value of the coupling capacitor can be calculated
using the desired 3 dB roll-off frequency, as follows:
Frequency f (3 dB) = 1/(2 × π × RIN × CIN)
where RIN = 5.6 kΩ.
Typically, a 2.2 μF capacitor is recommended. This sets the
lower frequency cutoff, at 20 Hz, at approximately −1.5 dB.
STEREO BOOST MODE
LEFT MIX
AINxL
VCM
AINxR
VCM
RIGHT MIX
AINxR
VCM
DIFFERENTIAL BOOST MODE
LEFT MIX
AINxP
VCM
AINxN
RIGHT MIX
VCM
DIFFERENTIAL PGA MODE
AINxP
LEFT MIX
LEFT MIX
VCM
RIGHT MIX
AINxN
RIGHT MIX
VCM
08975-025
VCM
Figure 82. Typical Input Block for Stereo/Mono Differential Inputs in PGA Modes and Boost Modes
Rev. 0 | Page 39 of 296
(1)
ADAU1373
The MICBIAS1 and MICBIAS2 pins (Ball C8 and Ball C9,
respectively) provide a voltage reference for electret analog
microphones. These pins are independent MICBIASx voltage
outputs that can be set using Register 0x21 to Register 0x23 of
the I2C control registers. The MICBIASx voltage can be set via
Register 0x21. Four output voltage settings are available: 1.8 V,
2.2 V, 2.6 V, and 2.9 V.
If using a differential or balanced condenser microphone
configuration, see Figure 84.
MICBIASx
PGA MODE
2kΩ
AINxL/AINxP
LEFT
MICROPHONE
AINxL/AINxN
R1*
Current sense circuits can detect the current going out of the
MICBIAS1 pin or MICBIAS2 pin. This current detect function
can be used to sense the presence of the electret microphone. The
internally generated current sense logic output can be used as an
interrupt on any of the four GPIOs to communicate to the system
controller. The current sense can be enabled or disabled using
Register 0x22 for MICBIAS1 and Register 0x23 for MICBIAS2.
Additional options include overcurrent protection, which can be
used to sense the short circuit of MICBIAS1 or MICBIAS2 to
ground at the microphone inputs. The overcurrent threshold is
programmable, allowing for flexibility in system design.
The MICBIASx pins can also be used to supply voltage to digital
microphones or analog microphones with separate power supply
pins. However, the maximum current that is available from the
MICBIAS1 or MICBIAS2 pin is 1.8 mA.
ADAU1373
–12dB TO
+18dB
2kΩ
PGA MODE
AINxR/AINxN
RIGHT
MICROPHONE
AINxR/AINxP
R2*
–12dB TO
+18dB
08975-022
Microphone Bias
*R1 AND R2 CAN BE 2k Ω FOR DIFFERENTIAL OR 0Ω FOR
PSEUDO-DIFFERENTIAL INPUT.
Figure 84. Condenser Microphone Input, Differential
Line Input Connection
To use the analog input as the line input, configure the input to
either stereo (single-ended) or mono (differential), as desired
(see Figure 85 or Figure 86, respectively).
Microphone Input Connection
ADAU1373
To use the microphone input, first identify the type of microphone
being used. The ADAU1373 provides microphone bias for
condenser microphones. Set the bias voltage as required in the
application. It is recommended that the bias be connected to the
desired microphone input using a 2 kΩ resistor.
LEFT LINE
INPUT
AINxL/AINxP
–12dB TO
+18dB
If using a single-ended condenser microphone, see Figure 83 for
the correct connection configuration.
ADAU1373
PGA MODE
RIGHT LINE
INPUT
LEFT
MICROPHONE
AINxR/AINxN
08975-010
AINxL/AINxP
–12dB TO
+18dB
–12dB TO
+18dB
2kΩ
Figure 85. Single-Ended Line Input
MICBIASx
RIGHT
PGA
2kΩ
+INPUT
AINxR/AINxN
–12dB TO
+18dB
Figure 83. Condenser Microphone Input, Single-Ended
–INPUT
AINxR/AINxN
Figure 86. Differential Line Input
Rev. 0 | Page 40 of 296
08975-011
–12dB TO
+18dB
08975-008
RIGHT
MICROPHONE
ADAU1373
AINxL/AINxP
ADAU1373
Input Impedance
Earpiece Mixer Output
The input resistance for Analog Input 1 through Analog Input 4
(AINx, Ball A5 through Ball A8 and Ball B5 through Ball B8)
depends on the gain mode setting. The input resistance is lowest
(at approximately 5.6 kΩ) for a +18 dB gain in PGA mode, and
it is highest (at approximately 47 kΩ) for a −12 dB setting. In
boost mode, the input resistance is constant at 20 kΩ. The input
resistance must be considered when calculating the required input
coupling capacitor. It is recommended that the lowest value of
the impedance be used when determining the microphone input
coupling capacitor.
The mixer prior to the earpiece amplifier allows selection of
any or all of the four analog inputs, as well as the DAC output.
When multiple inputs are selected, they are mixed prior to the
earpiece output amplifier. Register 0x1C can be used to select
the signals going to the earpiece mixer.
Common-Mode Input Voltage
The common-mode voltage at the input pins (AINx) is typically
at AVDD/2. The common-mode voltage at the inputs is turned
off when the inputs are muted. The common-mode voltage
rises slowly as the inputs are unmuted and charges the input
capacitors. To prevent the turn on pop, it is recommended that
the inputs be unmuted in the ADAU1373 and be muted at the
source. If this recommendation is not adhered to, there is a
possibility of a turn on pop as the common-mode voltage at the
inputs charges up.
MIXER BLOCK
The ADAU1373 provides the analog mixer block for mixing the
analog inputs. The mixer block is available prior to the ADC,
line output, headphone output, speaker output, and earpiece
output, which provides the system designer with many
configuration options.
ADC Mixer Input
ANALOG OUTPUTS
Line Output
The ADAU1373 provides two single-ended stereo line level outputs
on LOUT1L (Ball C7) and LOUT1R (Ball D7) or on LOUT2L
(Ball D8) and LOUT2R (Ball D9). The line level outputs can be
configured as single-ended or differential. The stereo differential
outputs are available on LOUTLP (Ball C7) and LOUTLN
(Ball D8) or on LOUTRP (Ball D7) and LOUTRN (Ball D9). The
line output control register (Register 0x24) can be used to set the
line output mode. The outputs have series resistance to protect
against output short circuit. The typical recommended load
impedance is approximately 47 kΩ. The line output amplifier uses
AVDD as its supply; therefore, the common-mode output level
on the line output pins is AVDD/2. Coupling capacitors must be
used before connecting the outputs to the desired load. The value
of the capacitors can be determined by the following:
Frequency f (3 dB) = 1/(2 × π × ROUT × COUT)
where ROUT = 0.3 Ω.
Set the desired 3 dB low frequency at the output. The line outputs
can receive input from any or all of the four inputs directly or
from the DAC (see Figure 87 and Figure 88 for block diagrams).
The mixer prior to the line output amplifier allows selection of any
or all of the four analog inputs, as well as the DAC outputs. When
multiple inputs are selected, they are mixed prior to the line
output amplifier. Register 0x14 through Register 0x17 can be
used to select the signals that are input to the line mixer.
The line outputs have a ground noise rejection feature that can be
enabled using Register 0x24, Bit 2 (LNFBEN). When enabled, the
line output amplifier rejects the noise on LN1FBIN (Ball E7) and
LN2FBIN (Ball E8). To use this feature, E7 and E8 must be connected directly to the ground node (typically, the sleeve contact
of the line output socket) using a capacitor. The ground noise
rejection feature is very useful in applications where the line
outputs are used to connect to an external audio system (such as
a home theater or docking station) that works on a different power
supply and can cause a ground loop when connected to the line
output using a single-ended (unbalanced) connection.
Headphone Mixer Output
Line Output Full-Scale Level
The mixer prior to the headphone output amplifier allows
selection of any or all of the four analog inputs, as well as the
DAC outputs. When multiple inputs are selected, they are mixed
prior to the headphone output amplifier. Register 0x1A and
Register 0x1B can be used to select the signals going to the
headphone mixer.
The full-scale output for the line output depends on AVDD.
At AVDD = 1.8 V, the full-scale output level is 0.5 V rms singleended or 1 V rms differential. The full-scale input level scales
linearly with the level of AVDD.
The mixer prior to the ADC input allows selection of any or all of
the four analog inputs. When multiple inputs are selected, they are
mixed prior to the ADC. Register 0x12 and Register 0x13 can be
used to select the signals that are input to the ADC mixer.
Line Mixer Output
Speaker Mixer Output
The mixer prior to the headphone output amplifier allows selection
of any or all of the four analog inputs, as well as the DAC outputs.
Register 0x18 and Register 0x19 can be used to select the signals
going to the speaker mixer.
Line Output Volume Control
The line output level can be controlled using Register 0x09
(Left Channel Line Output 1 volume control), Register 0x0A
(Right Channel Line Output 1 volume control), Register 0x0B
(Left Channel Line Output 2 volume control), and Register 0x0C
(Right Channel Line Output 2 volume). The volume control
range is from mute to 0 dB in 32 steps.
Rev. 0 | Page 41 of 296
ADAU1373
LINE OUTPUT – STEREO SINGLE-ENDED (UNBALANCED)
ADAU1373
IN1L
IN2L
IN3L
IN4L
DAC1L
DAC1R
DAC2L
DAC2R
L + R MIX
STEREO
L+R TO LEFT
–75dB TO 0dB
L+R TO RIGHT
C7
LOUT1L/ C1
LOUTLP
E7
LN1FBIN
MUTE
IN1R
IN2R
IN3R
IN4R
DAC1L
DAC1R
DAC2L
DAC2R
LINEOUT1
LEFT
1µF
C2
1
2.2µF
–75dB TO 0dB
STEREO
L+R TO LEFT
L+R TO RIGHT
MUTE
IN1L
IN2L
IN3L
IN4L
DAC1L
DAC1R
DAC2L
DAC2R
D7
DIFF
LOUT1R/ C3
LOUTRP
1µF
R1
47kΩ
UNBAL
STEREO
L+R TO LEFT
–75dB TO 0dB
L+R TO RIGHT
D8
LOUT2L/ C4
LOUTLN
E8
LN2FBIN
MUTE
IN1R
IN2R
IN3R
IN4R
DAC1L
DAC1R
DAC2L
DAC2R
LINEOUT1
RIGHT
R2
47kΩ
LINEOUT2
LEFT
1µF
C5
1
2.2µF
–75dB TO 0dB
STEREO
L+R TO LEFT
L+R TO RIGHT
MUTE
D9
DIFF
LOUT2R/ C6
LOUTRN
LINEOUT2
RIGHT
1µF
R3
47kΩ
UNBAL
R4
47kΩ
08975-027
1IF USING GROUND NOISE REJECTION FEATURE, CONNECT AT THE
LINEOUT SOCKET GROUND PIN.
Figure 87. Line Output Block Diagram, Stereo Single-Ended
LINE OUTPUT – STEREO DIFFERENTIAL
ADAU1373
IN1R
IN2R
IN3R
IN4R
DAC1L
DAC1R
DAC2L
DAC2R
IN1L
IN2L
IN3L
IN4L
DAC1L
DAC1R
DAC2L
DAC2R
L + R MIX
STEREO
L + R TO LEFT
–75dB TO 0dB
L + R TO RIGHT
C7
LOUT1L/
LOUTLP
E7
LN1FBIN
LINEOUT LEFT +
1µF
MUTE
C2
1
2.2µF
–75dB TO 0dB
STEREO
L + R TO LEFT
L + R TO RIGHT
MUTE
D8
DIFF
LOUT2L/ C3
LOUTLN
1µF
R1
47kΩ
UNBAL
STEREO
L + R TO LEFT
–75dB TO 0dB
D7
L + R TO RIGHT
LOUT1R/
LOUTRP
C4
LINEOUT LEFT –
R2
47kΩ
LINEOUT RIGHT +
1µF
MUTE
E8
IN1R
IN2R
IN3R
IN4R
DAC1L
DAC1R
DAC2L
DAC2R
C1
LN2FBIN
C5
1
2.2µF
–75dB TO 0dB
STEREO
L + R TO LEFT
L + R TO RIGHT
MUTE
DIFF
D9
UNBAL
LOUT2R/ C6
LOUTRN
1µF
R3
47kΩ
1IF
USING GROUND NOISE REJECTION FEATURE, CONNECT AT THE
LINEOUT SOCKET GROUND PIN.
Figure 88. Line Output Block Diagram, Stereo Differential
Rev. 0 | Page 42 of 296
LINEOUT RIGHT –
R4
47kΩ
08975-028
IN1L
IN2L
IN3L
IN4L
DAC1L
DAC1R
DAC2L
DAC2R
ADAU1373
HEADPHONE OUTPUT
The ADAU1373 provides a high efficiency Class-G stereo
headphone output that is true ground centered; therefore,
no external coupling capacitors are required for connection to
the headphones. The headphones can be connected directly to
the headphone output pins, HPL (Ball G8) and HPR (Ball G9).
The headphone amplifier uses the supply provided at HPVDD
(Ball H8). The recommended operating supply voltage is 1.8 V.
This supply voltage must be decoupled with a 1 μF electrolytic
capacitor, along with a 100 nF ceramic X7R capacitor. The
headphone amplifier uses Class-G architecture and generates the
required power supplies, using a flying capacitor with a built-in
charge pump connected across CF1 (Ball J9) and CF2 (Ball J7).
The charge pump switching frequency is approximately 500 kHz.
The generated supply voltages are available at CPVDD (Ball H9,
positive rail), and CPVSS (Ball H7, negative rail).
The voltage at this node depends on the input signal to the
amplifier. For lower input signal levels, the positive and negative
rails are lowered, typically ±0.9 V for 1.8 V HPVDD. As the
signal level increases, CPVDD and CPVSS are raised to a higher
voltage of ±1.8 V for 1.8 V HPVDD. This rail switching allows
the amplifier to achieve higher efficiency. In most typical usage
conditions, the amplifier works on the lower ±0.9 V CPVDD and
CPVSS voltages, thereby consuming lower power. In addition, as
the amplifier generates the positive and negative rails, the output
amplifier is true ground centered, thereby eliminating the need for
big coupling capacitors to drive the load. For good audio performance, it is recommended that 1 μF, X7R ceramic decoupling
capacitors be used for CPVDD and CPVSS. These capacitors
serve as a reservoir for the headphone amplifier.
In high efficiency mode, the rails are fixed at ±0.9 V, independent
of the input signal level. This mode reduces the output power
available from the amplifier and also reduces the amount of
current consumed by the battery.
In low efficiency mode, the rails are fixed at ±1.8 V, independent
of the input signal level. This mode enables the amplifier to
produce higher output levels, but current consumption is higher
than in high efficiency mode.
It is recommended that the default mode, Class-G mode, be used
because the supply rails are switched based on the input level.
The headphone amplifier also has a built-in overcurrent
protection circuit that protects the amplifier against a short
circuit to ground on the outputs. The overcurrent detect threshold
level can be programmed to the desired load impedance level
using Register 0x1D, Bits[1:0]. The available settings are 200 mA,
250 mA, 300 mA, and 350 mA.
The turn on time for the headphone amplifier is programmable
using Register 0x1D, Bits[5:4]. Four settings are available: 2 ms,
4 ms, 8 ms, and 16 ms.
The headphone jack insertion detect feature can be used to turn
off the speaker amplifier when the headphones are connected to
the amplifier, thereby saving extra power consumed from the
battery. Register 0x36, Bits[1:0] and Register 0x38, Bit 4 are
provided to turn on this feature. Note that this feature requires
the use of a headphone jack with a switch. See Figure 89 for
more information.
≥ AVDD
100kΩ
TYP
The amplifier has built-in short-circuit protection and,
therefore, shuts down in the event of a short circuit on the
headphone outputs.
ADAU1373
JACKDET
HPL
The headphone amplifier is designed to drive headphones with
a minimum impedance of 16 Ω. The output level of the amplifier
can be controlled using Register 0x0F (left channel headphone
output volume control bits) and Register 0x10 (right channel
headphone output volume control bits).
In addition, the headphone amplifier can be set to different
working modes, depending on the performance and power
consumption requirements (Register 0x1D, Bits[3:2]). The
available modes include Class-G (default), high efficiency, and
low efficiency. In Class-G mode, the amplifier rails are switched
between ±0.9 V and ±1.8 V, depending on the signal level. The
threshold for rail switching in Class-G operation can be set to
300 mV, 400 mV, or 500 mV using Register 0x1E, Bits[6:5].
HPR
SGND
HEADPHONE
JACK
08975-029
SGND (Ball G7) is provided for sensing the dc potential at the
headphone socket. It is recommended that SGND be connected
directly to the ground pin of the headphone socket, which ensures
the lowest dc offset at the amplifier output and eliminates popand-click turn on/turn off for the amplifier. In addition, it helps
reduce crosstalk between the left and right channel outputs.
Figure 89. Headphone Jack Detect Option 1
In a typical application, the headphone amplifier is powered down,
and its output is typically high impedance when inactive. Using
Register 0x1E, Bit 4 (HIZ), the headphone outputs can be pulled
down with a 300 Ω resistor. When set to a lower impedance, the
JACKDET pin (Ball G5) is pulled to ground via the 300 Ω internal
resistance of the headphone amplifier. When the headphone plug
is inserted into the headphone socket, the switch at the tip of the
socket is disconnected. This, in turn, pulls the JACKDET pin
to logic high via Resistor R1. This change in logic level at the
JACKDET pin can be used to initiate the interrupt on the GPIOx
pin or can be read in the IRQ status register (Register 0xE7), Bit 1
(HP_DECT_STATUS).
Rev. 0 | Page 43 of 296
ADAU1373
Figure 90 shows another option for similar functionality. The
circuit in Figure 90 does not use the amplifier to pull down the
JACKDET pin (Ball G5); instead, it uses an isolated switch in
the headphone jack.
SPKxN outputs. In addition, it monitors the junction temperature
internally and shuts down if the temperature exceeds 150°C ±
15°C. In fault situations, the amplifier is switched to high-Z
mode for safe and reliable operation.
The logic change of the JACKDET pin is reported in Bit 4,
Register 0x38. In addition, the debounced version of the logic
change is provided in Register 0xE6, Bit 1. Register 0x36 can be
used to control the state of the headphone amplifier and speaker
amplifier. Table 10 lists the possible settings.
The amplifier uses three-level PDM switching and an analog
modulator with internal feedback. This method ensures good
PSRR on the outputs. Three-level switching eliminates the need
for an external output filter for connecting the speakers. However,
it is important to ensure that the speakers be placed within 10 cm
from the ADAU1373 to reduce EMI from the switching outputs.
For best EMI performance, proper board layout is required. It is
recommended that the supply voltage pins (G1, G2, H2, and
H3) be decoupled to SPKGND (H4, H5, J1, and J5) with two
100 nF, X7R ceramic capacitors.
Table 10. Headphone/Speaker Amplifier Control Settings
1
Reg. 0x36,
Bit 1
0
1
1
1
1
Reg. 0x36,
Bit 0
X1
0
0
1
1
Headphone
Amplifier
Status
No change
Power-down
No change
Power-down
No change
Speaker
Amplifier
Status
No change
No change
Power-down
Power-down
No change
The high efficiency amplifier outputs reduce power dissipation;
however, thermal performance depends on layout of the board.
The amplifier receives the input from the speaker mixer and
includes a circuit to prevent pop-and-click during turn off and
turn on.
X = don’t care.
The amplifier output level can be controlled using Register 0x0D
(speaker out left gain control) and Register 0x0E (speaker out
right gain control).
For example, if Register 0x36, Bits[1:0] = 10 and JACKDET
is high, the headphone amplifier is shut down, and the speaker
amplifier status is unchanged. Note that the headphone or
speaker amplifier cannot be turned on automatically, based
on a JACKDET pin event. The amplifiers must be enabled via
Register 0x27, a power management register.
The amplifier can be set to work in mono or stereo mode using
Register 0x1F. In mono mode, the left and right channel signals
are mixed before being output to the speaker. The summed signal
can be made available to either the left or right speaker output.
SPEAKER OUTPUT
Register 0x1F, Bits[5:4] can be used to set the mono amplifier
mode for higher output current capability to drive low impedance
loads. In this mode, the left and right channel output FETs are
fed from one modulator only. The corresponding left and right
channel outputs must be connected externally to take advantage
of the low impedance drive capability.
The ADAU1371 provides stereo Class-D amplifier outputs to
drive the speakers directly. The three-level switching scheme
allows the speaker load to be connected directly without any
output filters; it also reduces idle power consumption and EMI by
reducing switching. The amplifier outputs are differential and use
full bridge topology. The amplifier has basic protections, such as
the output short to SPKVDD, SPKGND, and the SPKxP and
ADAU1373
PROG
MIC-BIAS2
HP-L
PCB
JACK EVENT
DETECT
JACKDET
SPKVDD
MICBIASx
2kΩ
AINxP
100kΩ
TYP
+
MIC-PRE2
The default amplifier gain is 12 dB; it can be changed to 18 dB
using Register 0x1F, Bit 3 (right channel) and Bit 2 (left channel).
HPL 1µF
HPR
SGND
2.5mm/3.5mm
MINI JACK
HP-R
Figure 90. Headphone Jack Detect Option 2
Rev. 0 | Page 44 of 296
08975-108
JACKDET
Pin Status
X1
1
0
1
0
ADAU1373
In addition, the amplifier provides edge rate control. The edge rate
control can be used to set the switching output slew rate for precise
EMI control. The edge rate can be used to reduce EMI in the
30 MHz to 100 MHz band. The slower edge rate reduces EMI
but also compromises audio performance. The higher edge rate
improves audio performance, but there is more energy in the
30 MHz to 100 MHz band than at the lower edge rate. The EDGE
bits (Bits[1:0]) in Register 0x1F can be used for edge rate control.
The ADC output level can be controlled before DSP processing
in Register 0x72 (ADC left channel recording volume control)
and Register 0x73 (ADC right channel recording volume control).
Peak Detect
The ADC has a peak detection feature that can be enabled or
disabled using the PDETECT bit (Bit 0) in Register 0x3C.
ADC RESET
ADAU1373
LEFT AND
RIGHT
Digital ADC Volume Control
The ADC can be reset by writing Bits[2:1] = 11 in Register 0x3C.
By default, ADC reset is disabled.
SPKLP
ADC STATUS
SPKLN
The ADC status bits are available for reading via the NOCLKADC
bit (Bit 0) in Register 0x37.
+12dB/18dB
DIGITAL-TO-ANALOG CONVERTER (DAC)
SPKRN
The ADAU1373 consists of two stereo Σ-Δ DACs (DAC1 and
DAC2). Each DAC uses a 128 × fS clock and 24-bit resolution.
The DACs receive input from either the DSP or the ADC.
08975-030
SPKRP
Figure 91. Amplifier Connection Diagram, Mono Mode
If only the DAC output is used during playback through the
speaker, a mode is available that allows the DAC output to be
sent directly and internally to the speaker simplifier block input
instead of passing it through the mixer stage, which improves
the signal-to-noise ratio at the speaker output by 6 dB. However,
in this mode, the speaker mixer block is disabled, and only the
DAC output can be routed to the speaker amplifier. The DIRCD
bit (Bit 6) in Register 0x1F is used to enable this feature.
ANALOG-TO-DIGITAL CONVERTER (ADC)
The ADAU1373 consists of a stereo sigma-delta (Σ-Δ) ADC.
The ADC uses a 128 × fS clock and 24-bit resolution. The input
signal to the ADC is provided via the ADC mixer. Any or all of
the four inputs can be selected to be sent to the ADC using the
ADCLMIXx bits (Bits[4:0]) in Register 0x12 for the left channel
and the ADCRMIXx bits (Bits[4:0]) in Register 0x13 for the right
channel. The ADC output can be made available on the digital
audio ports or sent to the on-chip DAC for analog output.
DAC output can be routed to the line output, headphone output,
earpiece output, or speaker output.
DAC Full-Scale Level
The full-scale output for the DAC, with 0 dBFS input, depends on
AVDD. At AVDD = 3.3 V, the full-scale output level is 0.55 V rms
single-ended or 1 V rms differential. The full-scale input level
scales linearly with the level of AVDD.
Digital DAC Volume Control
The DAC output level can be attenuated using Register 0x6E
(DAC1 left channel playback volume control), Register 0x6F
(DAC1 right channel playback volume control), Register 0x70
(DAC2 left channel playback volume control), and Register 0x71
(DAC2 right channel playback volume control).
DAC Status
The DAC status bits are available for reading at Bits[6:5] in
Register 0x37.
ADC Full-Scale Level
CLOCK GENERATION AND DISTRIBUTION
The full-scale input to the ADCs (0 dBFS) depends on AVDD.
At AVDD = 3.3 V, the full-scale input level is 0.55 V rms singleended or 1 V rms differential. The full-scale input level scales
linearly with the level of AVDD. For single-ended and pseudodifferential signals, the full-scale value corresponds to the signal
level at the pins, which is 0 dBFS. Signal levels above the full-scale
value cause the ADCs to clip.
The ADAU1373 requires an external clock for operation. Flexible
clocking control enables the use of many different input clock
rates. The on-chip PLL can be used to dejitter the external clock.
Two identical PLL blocks, PLLA and PLLB, are provided and
can be bypassed if not required. Figure 92 shows the top level
block diagram for PLL.
PLL TOP LEVEL
CLOCK > 8MHz
44.1kHz × 1024/
48kHz × 1024
APLL
÷X
×(R + N/M)
DPLL
÷ Nd
× Md
CLOCK < 8MHz
08975-012
BCLKA
BCLKB
BCLKC
MCLK1
LRCLKA
LRCLKB
LRCLKC
GPIO1
GPIO2
GPIO3
GPIO4
MCLK2
Figure 92. PLL Top Level Block Diagram
Rev. 0 | Page 45 of 296
ADAU1373
The PLL block consists of a digital PLL (DPLL), followed by an
analog PLL (APLL) with multiplexer. This architecture allows
flexibility in providing the clock to the ADAU1373. The DPLL
can accept clock rates from 8 kHz to 8 MHz and outputs clock
frequencies from 8 MHz to 27 MHz. The APLL can accept the
clock output from the DPLL and provide further fine resolution
to generate the clocks for internal blocks. If the input clock is
greater than 8 MHz, the DPLL can be powered down to save
power. In such a case, the external clock can be sent directly to
the APLL. See Figure 93 for a diagram of clock distribution
inside the ADAU1373.
PLLA
REG. 0x28 DPLLA_CTRL
BCLKA
BCLKB
BCLKC
MCLK1
LRCLKA
LRCLKB
LRCLKC
GPIO1
GPIO2
GPIO3
GPIO4
MCLK2
EXTERNAL CLOCK > 8MHz
÷N
CLK1SDIV
ANALOG PLLA
DPLLA_CLK_OUT
fINA
÷X
× (R + N/M)
×1024
(1024 × 48kHz)/(1024 × 44.1kHz)
÷ (K + 1)
CLK1 OUT 3-BIT DIVIDER
K = 0 TO 7
÷ 1 TO 8
R = 0 TO 15
X = 1 TO 4
X = 1 DEFAULT M AND N 16-BIT BINARY NUMBER
R = 2 DEFAULT
M = 253 DEFAULT
N = 0 DEFAULT
PLLA BYPASS
CORE CLOCK ENABLE
DPLLA LOCK
INDICATOR
DPLLA
DPLLA_REF_SEL
APLLA CLOCK OUT
EXTERNAL CLOCK
PLL
DPLLA_NDIV
1....1024
IN 11 STEPS
8kHz TO 8MHz
CLK1_SOURCE_DIV (REG. 0x40)
REG. 0x29 THROUGH REG. 0x2E PLLA CONTROL REGISTER
MCLK1DIV
48kHz × 256
44.1kHz × 256
÷ (J + 1)
32kHz × 256
3-BIT DIVIDER
J = 0 TO 7
÷ 1 TO 8
128 × fs
÷2
128 × fs
256 × fs
ADC CLK/
DAC1/2 CLK
INT CLK/
DEC CLK/
FDSP CLK
ASRC CLK/
AIFCLKA
CLK1_OUTPUT_DIV (REG. 0x41)
CLK1ODIV
÷ (P + 1)
5-BIT DIVIDER
P = 0 TO 31
÷ 1 TO 32
MCLK1 OUT
PLLB
REG. 0x2F DPLLB_CTRL
BCLKA
BCLKB
BCLKC
MCLK1
LRCLKA
LRCLKB
LRCLKC
GPIO1
GPIO2
GPIO3
GPIO4
MCLK2
EXTERNAL CLOCK > 8MHz
÷N
ANALOG PLLB
DPLLB_CLK_OUT
fINB
÷X
× (R + N/M)
×1024
(1024 × 48kHz)/(1024 × 44.1kHz)
R = 0 TO 15
X = 1 TO 4
X = 1 DEFAULT M AND N 16-BIT BINARY NUMBER
R = 2 DEFAULT
M = 253 DEFAULT
PLLB BYPASS
N = 0 DEFAULT
DPLLB LOCK
INDICATOR
DPLLB
DPLLB_REF_SEL
APLLB CLOCK OUT
EXTERNAL CLOCK
PLL
DPLLB_NDIV
1....1024
IN 11 STEPS
8kHz TO 8MHz
CLK2_SOURCE_DIV (REG. 0x42)
CLK2SDIV
MCLK2DIV
REG. 0x30 THROUGH REG. 0x35 PLLB CONTROL REGISTER
CLK2 OUT
÷ (K + 1)
3-BIT DIVIDER
K = 0 TO 7
÷ 1 TO 8
÷ (J + 1)
3-BIT DIVIDER
J = 0 TO 7
÷ 1 TO 8
32kHz × 256
44.1kHz × 256
48kHz × 256
256 × fs
CLK2_OUTPUT_DIV (REG. 0x43)
CLK2ODIV
÷ (P + 1)
5-BIT DIVIDER
P = 0 TO 31
÷ 1 TO 32
DECIMATOR
DIGITAL MIC 2 INPUT
DIGITAL MIC 1 INPUT
DECIMATOR
ANALOG IN MIXER
DEC_CLK (128 × fS)
DEC_CLK (128 × fS)
OUTPUT MIXER
DAC1_PB
FS_A_EXT
DIN_A
FDSP_CH1_DOUT
FDSP_CH1_DIN
DEC_CLK (128 × fS)
DAC2_PB
DAC2
DOUT_A
FDSP_CH0_DIN
ADC/
DMIC1_DOUT
DAC1
BCLK_A
FDSP_CH0_DOUT
DEC_CLK (128 × fS)
ADC
ADC/
DMIC1
MCLK2_OUT
DMIC2_DOUT
64 × f S
DMIC_CLK
AIFCLKB
FS_A_INT
DIGITAL
AUDIO
INTERFACE A
FS_DSP
BCLK_A
DOUT_A
MIX/MUX
DSP
BCLK_DSP
ASRCA
DIN_A
DOUT_DSP
DIN_DSP
AIFA_REC
AIFA_PB
FDSP_CH2_DOUT
FDSP_CH2_DIN
AIFCLK_A
AIFCLK_B
FS_B_EXT
BCLK_B
DOUT_B
DIN_B
FS_B_INT
DIGITAL
AUDIO
INTERFACE B
FS_DSP
BCLK_B
DOUT_B
BCLK_DSP
ASRCB
DIN_B
DOUT_DSP
DIN_DSP
AIFB_REC
AIFB_PB
FDSP_CH3_DOUT
FDSP_CH3_DIN
AIFCLK_A
AIFCLK_B
FS_C_INT
BCLK_C
DOUT_C
DIN_C
DIGITAL
AUDIO
INTERFACE C
FS_DSP
BCLK_C
DOUT_C
DIN_C
BCLK_DSP
ASRCC
DOUT_DSP
DIN_DSP
AIFCLK A
AIFCLK B
(256 × f S)
AIFC_REC
AIFC_PB
FDSP_CH4_DOUT
FDSP_CH4_DIN
ASRC_CLK (256 × fS)
FDSP_CLK (128 × fS)
Figure 93. Clock Distribution
Rev. 0 | Page 46 of 296
08975-013
FS_C_EXT
ADAU1373
DPLL
APLL
The DPLL consists of a phase comparator, followed by a highpass filter and integrators. The following equation shows the
relationship of input-to-output frequency:
The APLL provides the fine resolution required to generate clocks
for the internal blocks. It uses either the clock input at the MCLK1
pin (Ball C2) or a DPLL output as a reference to generate the core
clock. The PLL can be set for either integer or fractional mode.
The PLL multiplier and divider (X, R, M, and N) are programmed
using Register 0x29 to Register 0x2D for PLLA and Register 0x30
to Register 0x34 for PLLB. The PLL can accept input frequencies in
the range of 8 MHz to 27 MHz, either directly from an external
source, if the external clock input is greater than 8 MHz, or from
the DPLL, if the external clock input is within a range of 8 kHz
to 8 MHz. The PLL lock range is 45.158 MHz to 49.152 MHz.
fOUT = (fIN/ND) × MD
where:
fOUT is the DPLL output frequency (8 MHz to 27 MHz).
fIN is the DPLL input frequency (8 kHz to 8 MHz).
ND is the divider. It can be set to 1, 2, 4, 8, 16, 32, 64, 128, 256, 512,
or 1024, using Bits[3:0] (DPLLA_NDIV) in Register 0x28 for
DPLLA and Bits[3:0] (DPLLB_NDIV) Register 0x2F for DPLLB.
MD is the multiplier (fixed internally to 1024).
DPLL Divider Example
fIN = 8 kHz
fOUT = 8 MHz
ND = 8 × 1024/8 = 1.024
This sets the PLL output frequency based on the sample rate
governed by the following equation:
fPLL = 256 × fS × (J + 1) × (K + 1)
Setting ND to 1 results in fOUT ≥ 8 MHz. Therefore, ND should
be set to 1.
Core Clock
The core clock is derived directly from the external clock at the
MCLK1 or MCLK2 pins or from the PLL. The PLLA_EN bit for
PLLA (Bit 0 in Address 0x2E) and the PLLB_EN bit for PLLB
(Bit 0 in Address 0x35) can be used to enable or disable the
PLL. Clocks for the converters, the serial ports, and the DSP are
derived from the core clock. The core clock rate is always an
integer multiple of the desired sample rate used inside the part.
Case 1—PLL Bypassed (Using External Clock as Core Clock)
If the PLL is bypassed, the clock available at MCLK1 (Ball C2)
or MCLK2 (Ball D1) is used as the core clock. Therefore, fCORE = fIN.
As the PLL is bypassed, the frequency of the clock at the MCLKx
pins must be set properly, using the clock divider bits, CLK1SDIV,
Bits[5:3], and MCLK1DIV, Bits[2:0], in Register 0x40 for PLLA and
CLK2SDIV, Bits[5:3], and MCLK2DIV, Bits[2:0] in Register 0x42
for PLLB. The required external clock rate can be determined by
the following equation, in which J and K are the clock dividers:
fIN
× (R + N/M)
÷X
TO PLL
CLOCK DIVIDER
08975-014
where J, K = 0, 1, 2, …7.
Figure 94. APLL Block Diagram
The APLL can be used in either integer mode or fractional mode.
Integer Mode
Integer mode is used when the MCLK frequency is an integer
multiple of the PLL output (1024 × fS) frequency, governed by
the following equation:
fPLL = (R/X) × fIN
where fPLL = 1024 × fS
For example, if fIN = 12.288 MHz and fS = 48 kHz, then
fPLL (PLL Required Output) = 1024 × 48 kHz = 49.152 MHz
R/X = 49.152 MHz/12.288 MHz = 4
Therefore, R and X are set as follows: R = 4, and X = 1 (default).
In integer mode, the values set for N and M are ignored. Table 13
shows common integer PLL parameter settings for fS = 48 kHz
sampling rates.
Fractional Mode
fIN = 256 × fS × (J + 1) × (K + 1)
See Table 14, Table 15, and Table 16 for some possible options
for external clock rates. Note that clock rates greater than 50 MHz
require careful attention to the clock driver and board layout to
maintain signal integrity.
Be sure that this clock is available to the MCLKx input pins
before enabling the COREN bit (Bit 7, core clock enable) in
Register 0x40.
Fractional mode is used when the available MCLK is a fractional
multiple of the desired PLL output; it is governed by the following:
fPLL = fIN × (R + (N/M))/X
For example, MCLK = 12 MHz and fS = 48 kHz.
The PLL output is 1024 × fS.
PLL Output = 1024 × 48 kHz = 49.152 MHz
To find the values of R, N, and M, use the following equation:
Case 2—PLL Enabled
fPLL = fIN × (R + (N/M))/X
The internal PLL can be used to generate the core clock from
the external clock. The internal PLL has two modes of operation:
integer mode and fractional mode. Therefore, fCORE = fPLL.
where fPLL = 49.152, and fIN = 12 MHz.
(R + (N/M))/X = 49.152 MHz/12 MHz = 4 + (12/125)
See Table 11 and Table 12 for common fractional PLL parameter
settings for 44.1 kHz and 48 kHz sampling rates.
Rev. 0 | Page 47 of 296
ADAU1373
Table 11, Table 12, and Table 13 also list the typical PLL settings
at 44.1 kHz and 48 kHz sample rates. Note that the PLL control
setting in hexadecimal format represents the 48 bits (six bytes)
for either PLLA or PLLB. For PLLA, the six bytes should be written
starting from Register 0x29 through Register 0x2E. For PLLB,
the six bytes should be written starting from Register 0x30
through Register 0x35.
To program the PLL during initialization or reconfiguration of
the clock setting, use the following procedure:
PLL Lock Acquisition
4.
The core clock for the device is disabled until the core clock enable
bit (Bit 7, COREN) in Register 0x40 is set to 1. It is recommended
that the audio outputs not be turned on until PLL lock is
established.
5.
1.
2.
3.
6.
Bring the required blocks out of power-down (Register 0x25
to Register 0x27).
Ensure that the core clock is disabled (Register 0x40, Bit 7 = 0).
Enable the PLL (Register 0x2E, Bit 0, for PLLA; Register 0x35,
Bit 0, for PLLB).
Set the PLL control registers for the desired clock rate
(Register 0x28 to Register 0x2D for PLLA and Register 0x2F
to Register 0x34 for PLLB).
Poll the lock bit (Register 0x2E, Bit 2, and Register 0x35,
Bit 2, for APLL and Register 0x2E, Bit 3, and Register 0x35,
Bit 3, for DPLL). If the lock bit is set, proceed to Step 6;
otherwise, continue to poll. If no lock is established, check
the clock rate settings and clock to the device.
To ensure that the various blocks in the device are clocked
correctly, assert the core clock enable bit only after PLL
lock is acquired.
Table 11. Fractional PLL Parameter Settings for 44.1 kHz Base Sample Rate (PLL Output = 45.1584 MHz = 1024 × fS)
MCLK Input (MHz)
8
12
13
14.4
19.2
19.68
19.8
24
26
27
Input Divider (X)
1
1
1
2
2
2
2
2
2
2
Integer (R)
5
3
3
6
4
4
4
3
3
3
Denominator (M)
625
625
8125
125
125
1025
1375
625
8125
1875
Numerator (N)
403
477
3849
34
88
604
772
477
3849
647
PLL Control Setting (Hex)
0x0271 0193 2901
0x0271 01DD 1901
0x1FBD 0F09 1901
0x007D 0022 3301
0x007D 0058 2301
0x0401 025C 2301
0x055F 0304 2301
0x0271 01DD 1B01
0x1FBD 0F09 1B01
0x0753 0287 1B01
Table 12. Fractional PLL Parameter Settings for 48 kHz Base Sample Rate (PLL Output = 49.152 MHz = 1024 × fS)
MCLK Input (MHz)
8
12
13
14.4
19.2
19.68
19.8
24
26
27
Input Divider (X)
1
1
1
2
2
2
2
2
2
2
Integer (R)
6
4
3
6
5
4
4
4
3
3
Denominator (M)
125
125
1625
75
25
205
825
125
1625
1125
Numerator (N)
18
12
1269
62
3
204
796
12
1269
721
PLL Control Setting (Hex)
0x007D 0012 3101
0x007D 000C 2101
0x0659 04F5 1901
0x004B 003E 3301
0x0019 0003 2B01
0x00CD 00CC 2301
0x0339 031C 2301
0x007D 000C 2301
0x0659 04F5 1B01
0x0465 02D1 1B01
Table 13. Integer PLL Parameter Settings for fS = 48 kHz (PLL Output = 49.152 MHz = 1024 × fS)
MCLK Input (MHz)
12.288
24.576
1
Input Divider (X)
1
1
Integer (R)
4
2
Denominator (M)
Don’t care
Don’t care
X = don’t care.
Rev. 0 | Page 48 of 296
Numerator (N)
Don’t care
Don’t care
PLL Control Setting (Hex) 1
0xXXXX XXXX 2001
0xXXXX XXXX 1001
ADAU1373
SAMPLING RATES
Step 2—Determine Divider J and Divider K
The ADCs, DACs, and DSP share a common sampling rate (fS)
that is determined based on the core clock rate. Three digital
audio interface ports are available for the ADAU1373. Each port
is provided with an asynchronous sample rate converter (ASRC).
If the ASRCs are used, the sample rate at the digital ports can be
different from the internal sample rate. However, the sample rate
used internally must be equal to or higher than the sample rate
at the ports.
The PLL output or external clock input is divided down to get
the required 256 × fS core clock. Two clock dividers (CLK1SDIV,
Bits[5:3], and MCLK1DIV, Bits[2:0] in Register 0x40 for PLLA and
CLK2SDIV, Bits[5:3], and MCLK2DIV, Bits[2:0] in Register 0x42
for PLLB) are provided; each clock divider can be set from 1 to 8.
The CLKxSDIV bits set the K value, and the MCLKxDIV bits
set the J value of the divider. See Figure 93 for more details. See
Table 14, Table 15, and Table 16 for some possible options.
SETTING THE PLL AND CLOCK RATES
Next, depending on the whether the direct external clock or
PLL is used, select the appropriate equation from the following
sections.
For proper operation of the ADAU1373, the device must be set
for correct clock rates. Following are the recommended steps:
External Mode
Step 1—Sample Rate (fS)
Determine the desired operating sample rate (fS) for the internal
blocks. fS is based on either 48 kHz (48 kHz, 32 kHz, 24 kHz,
16 kHz, 8 kHz) or 44.1 kHz (44.1 kHz, 22.05 kHz, 11.025 kHz,
8.0182 kHz). If the ASRCs are bypassed, this is the operating
sample rate at Digital Audio Interface A, Digital Audio Interface B,
and Digital Audio Interface C.
In the external mode, the external clock frequency determines
the internal device operation clock rate.
If using external mode,
fIN = 256 × D × fS
where D = (J + 1) × (K + 1).
For external clock use, see Table 14, Table 15, and Table 16 for
some possible choices.
Note that clock input frequencies above 50 MHz, although
possible, require careful attention—especially on clock driver
and board layout to maintain signal integrity and lower EMI.
Table 14. 48 kHz Sample Rate (fS)
Input MCLK
fIN
256 × fS (12.288 MHz)
512 × fS (24.576 MHz)
768 × fS (36.864 MHz)
1024 × fS (49.152 MHz)
Register Setting
CLKxSDIV, Bits[5:3]
000
000
000
000
Divider
K=0
0
0
0
0
Divider Ratio
K+1
1
1
1
1
Register Setting
MCLKxDIV, Bits[5:3]
000
001
010
011
Divider
J
0
1
2
3
Divider Ratio
J+1
1
2
3
4
Divider
K=0
0
0
0
0
Divider Ratio
K+1
1
1
1
1
Register Setting
MCLKxDIV, Bits[5:3]
000
001
010
011
Divider
J
0
1
2
3
Divider Ratio
J+1
1
2
3
4
Divider
K=0
0
0
0
0
0
0
Divider Ratio
K+1
1
1
1
1
1
1
Register Setting
MCLKxDIV, Bits[5:3]
000
001
010
011
100
101
Divider
J
0
1
2
3
4
5
Divider Ratio
J+1
1
2
3
4
5
6
Table 15. 44.1 kHz Sample Rate (fS)
Input MCLK
fIN
256 × fS (11.289 MHz)
512 × fS (22.5792 MHz)
768 × fS (33.8688 MHz)
1024 × fS (45.1584 MHz)
Register Setting
CLKxSDIV, Bits[5:3]
000
000
000
000
Table 16. 32 kHz Sample Rate (fS)
Input MCLK
fIN
256 × fS (8.192 MHz)
512 × fS (16.384 MHz)
768 × fS (24.576 MHz)
1024 × fS (32.768 MHz)
1280 × fS (40.96 MHz)
1536 × fS (49.152 MHz)
Register Setting
CLKxSDIV, Bits[5:3]
000
000
000
000
000
000
Rev. 0 | Page 49 of 296
ADAU1373
PLL Mode
If using the PLL, set the dividers so that fPLL is within the range
of 45.158 MHz (1024 kHz × 44.1 kHz) to 49.152 MHz (1024 kHz ×
48 kHz).
Example 1—Using a PLL Sample Rate of 48 kHz
For a 48 kHz sample rate (fS), select the J and K such that fPLL is
within the range of 45 MHz to 50 MHz.
fPLL = 256 × D × 48,000
For D = 3, fPLL = 36.864 MHz; for D = 4, fPLL = 49.152 MHz;
and for D = 5, fPLL = 61.44 MHz. Setting D = 4 ensures that fPLL
is within the PLL range of 45 MHz to 50 MHz.
To determine the divider values, there are two options, as follows:
By setting J = K = 1, then D = 4 because D = (J + 1) × (K + 1).
By setting J = 0, K = 3 also results in D = (J + 1) × (K + 1) = 4.
Example 2—Using a PLL Sample Rate of 44.1 kHz
For a 44.1 kHz sample rate (fS), select the J and K such that fPLL is
within the range of 45 MHz to 50 MHz.
fPLL = 256 × D × 44,100
where D = (J + 1) × (K + 1).
For D = 3, fPLL = 33.868 MHz; for D = 4, fPLL = 45.158 MHz; and
for D = 5, fPLL = 56.448 MHz. Setting D = 4 ensures that fPLL is
within the PLL range of 45 MHz to 50 MHz.
To determine the divider values, there are two options, as follows:
By setting J = K = 1, then D = 4 because X = (J + 1) × (K + 1).
By setting J = 0, K = 3 also results in D = (J + 1) × (K + 1) = 4.
Example 3—Using a PLL Sample Rate of 32 kHz
For a 32 kHz sample rate (fS), select the J and K such that fPLL is
within the range of 45 MHz to 50 MHz.
fPLL = 256 × D × 32,000
where D = (J + 1) × (K + 1).
Setting J = 1 and K = 2 can result in D = 6.
Setting J = 0 and K = 5 also results in D = 6.
Step 3—Calculate APLL multiplier/dividers (X, R, N, M)
If using the analog PLL only, then fIN ≥ 8 MHz.
Next, using the fPLL calculated in Step 2, calculate the PLL X, R,
N, and M values.
where D = (J + 1) × (K + 1).
•
•
To determine the divider values, there are two options, as follows:
•
•
fPLL = 256 × fS × (J + 1) × (K + 1)
•
•
For D =5, fPLL = 40.96 MHz; for D = 6, fPLL = 49.152 MHz; and
for D = 7, fPLL = 57.344 MHz. Setting D = 6 ensures that fPLL is
within the PLL range of 45 MHz to 50 MHz.
For integer mode, use the following:
fPLL = (R/X) × fIN
N and M are ignored.
For fractional mode, use the following:
fPLL = fIN × (R + (N/M))/X
Select the values of R and X for integer mode or R, X, N, and M
for fractional mode.
If the available clock in the system (fIN) is known, and using the
PLL output frequency (fPLL) from Step 2, the values required for
X, R, N, and M for fractional mode or X and R for integer mode
can be calculated using the following equation:
(R/X) = fIN/fPLL (integer mode)
(R + N/M)/X = fIN/fPLL (fractional mode)
Wide selections are possible; refer to Table 11, Table 12, and
Table 13 for popular choices.
Step 4—Master Clock Output
The internal core clock, fCORE, can be made available at the
GPIO1/GPIO2/GPIO3/GPIO4 pins by setting Register 0xE3
or Register 0xE4. The master clock output frequency can
be set using the 5-bit divider (Register 0x41 for PLLA and
Register 0x43 for PLLB). Table 17 lists the registers that are
used to set the PLL, and Table 18 provides descriptions of the
48 bits that are used for PLL control.
Rev. 0 | Page 50 of 296
ADAU1373
Table 17. PLL Control Register Summary
Reg
0x28
0x29
0x2A
0x2B
0x2C
0x2D
0x2E
0x2F
0x30
0x31
0x32
0x33
0x34
0x35
0x40
Name
DPLLA_CTRL
PLLA_CTRL1
PLLA_CTRL2
PLLA_CTRL3
PLLA_CTRL4
PLLA_CTRL5
PLLA_CTRL6
DPLLB_CTRL
PLLB_CTRL1
PLLB_CTRL2
PLLB_CTRL3
PLLB_CTRL4
PLLB_CTRL5
PLLB_CTRL6
CLK1_
SOURCE_DIV
0x41 CLK1_
OUTPUT_DIV
0x42 CLK2_
SOURCE_DIV
0x43 CLK2_
OUTPUT_DIV
Bit 7
Bit 6
Bit 5
DPLLA_REF_SEL
Bit 4
Bit 3
Bit 2
Bit 1
DPLLA_NDIV
Bit 0
PLLA_M_HI
PLLA_M_LO
PLLA_N_HI
PLLA_N_LO
RESERVED
PLLA_R
RESERVED
DPLLB_REF_SEL
DPLLA_LOCKED
PLLA_LOCKED
PLLA_X
DPLLA_BYPASS
DPLLB_NDIV
PLLA_TYPE
PLLA_EN
PLLB_LOCKED
PLLB_X
DPLLB_BYPASS
MCLK1DIV
PLLB_TYPE
PLLB_EN
PLLB_M_HI
PLLB_M_LO
PLLB_N_HI
PLLB_N_LO
RESERVED
PLLB_R
RESERVED
COREN
DPLLB_LOCKED
CLK1S_SEL
RESERVED
CLK2EN
CLK1SDIV
CLK1OEN
CLK1ODIV
CLK2S_SEL
RESERVED
CLK2SDIV
CLK2OEN
MCLK2DIV
CLK2ODIV
Reset
0x00
0x00
0x00
0x00
0x00
0x00
0x10
0x00
0x00
0x00
0x00
0x00
0x00
0x02
0x00
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
MMRW
0x00 RW
0x00 MMRW
0x00 RW
Table 18. PLLA/PLLB Control Register Settings (PLLA: Register 0x28 to Register 0x2E; PLLB: Register 0x2F to Register 0x35)
Bits
[47:32]
Bit Name
PLLx_M_HI[7:0],
PLLx_M_LO[7:0]
[31:16]
PLLx_N_HI[7:0],
PLLx_N_LO[7:0]
[15]
[14:11]
Reserved
PLLx_R[3:0]
Settings
0010
0011
0100
0101
0110
0111
1000
[10:9]
PLLx_X[1:0]
00
01
10
11
8
PLLx_TYPE
0
1
[7:4]
Reserved
Description
Denominator of the fractional APLL: a 16-bit binary number. The PLLA/PLLB Control M
value can be set using Register 0x29 and Register 0x2A for PLLA and Register 0x30 and
Register 0x31 for PLLB. The M integer is 16 bits wide. The upper eight bits are stored in
Register 0x29 and Register 0x30, and the lower eight bits are stored in Register 0x2A and
Register 0x31. The default value is 0x00FD: M = 253.
Numerator of the fractional APLL: a 16-bit binary number. The N value can be set using
Register 0x2B and Register 0x2C for PLLA and Register 0x32 and Register 0x33 for PLLB.
The upper eight bits are stored in Register 0x2B and Register 0x32, and the lower eight
bits are stored in Register 0x2C and Register 0x33. The default value is 0: N = 0.
Reserved.
Integer part of APLL: four bits. Only values of 2 to 8 are valid. The four bits are stored in
Register 0x2D for PLLA (Bits[6:3]) and Register 0x34 for PLLB (Bits[6:3]).
R = 2 (default).
R = 3.
R = 4.
R = 5.
R = 6.
R = 7.
R = 8.
APLL input clock divider. The two bits are stored in Register 0x2D for PLLA (Bits[2:1]) and
Register 0x34 for PLLB (Bits[2:1]).
X = 1 (default).
X = 2.
X = 3.
X = 4.
APLL operation mode. This bit is stored in Register 0x2D for PLLA (Bit 0) and Register 0x34
for PLLB (Bit 0).
Integer mode (default).
Fractional mode.
Reserved.
Rev. 0 | Page 51 of 296
ADAU1373
Bit Name
DPLLx_LOCKED
2
PLLx_LOCKED
1
DPLLx_BYPASS
0
PLLx_EN
Settings
Description
DPLLx lock (read-only bit). This bit is stored in Register 0x2E for PLLA (Bit 3) and Register
0x35 for PLLB (Bit 3).
0: DPLLx unlocked (default).
1: DPLLx locked.
APLL lock (read-only bit). This bit is stored in Register 0x2E for PLLA (Bit 2) and Register
0x35 for PLLB (Bit 2).
0: APLL unlocked (default).
1: APLL locked.
DPLL bypass bit. This bit is stored in Register 0x2E for PLLA (Bit 1) and Register 0x35 for
PLLB (Bit 1).
0: DPLLx not bypassed (default).
1: DPLLx bypassed.
APLL enable bit. This bit is stored in Register 0x2E for PLLA (Bit 0) and Register 0x35 for
PLLB (Bit 0).
0: APLL disabled (default).
1: APLL enabled.
DIGITAL MICROPHONE INPUT INTERFACE
ADAU1373
The ADAU1373 supports the digital microphone inputs.
The digital microphone output data can be connected at the
DMIC1_2_DATA and DMIC3_4_DATA pins (Ball B4 and Ball C6,
respectively). The bit clock for the digital microphone is available at the DMIC_CLK pin (Ball A4). The bit clock is fixed at
64 × fS (see Figure 5 for the waveforms).
Four digital microphones or two stereo pairs of digital microphones can be connected to the ADAU1373 (see Figure 95
and Figure 96). The single pair of digital microphones shares
the decimator with ADC; therefore, when using DMIC1_2_DATA,
the ADC is not available. However, DMIC3_4_DATA has a
separate decimator and, therefore, can be used independently.
0.1µF
DMIC1_2_DATA
DMIC_CLK
DMIC3_4_DATA
0.1µF
DMIC1_2_DATA
DMIC_CLK
DMIC3_4_DATA
DMIC1
DMIC2
Figure 96. Digital Microphone Connection Diagram for Two Microphones
To enable digital microphone support, the digital recording engine
must be enabled first, using Register 0xEB. The Digital Microphone 1/Digital Microphone 2 engine can be enabled using Bit 2
of Register 0xEB, and the Digital Microphone Input 3/Digital
Microphone 4 engine can be enabled using Bit 3 of Register 0xEB.
ADAU1373
IOVDD4
IOVDD4
08975-106
Bits
3
DMIC1
After the recording engine is enabled, the digital microphone
input block can be enabled using Register 0xE2, Bit 0 for Input 1/
Input 2 (DMIC1_2_DATA) and Bit 2 for Input 3/Input 4
(DMIC3_4_DATA). The digital microphone data input is then
routed through the decimator and the recording engine to
digital mix/mux.
DMIC2
By default, the digital microphone inputs are configured as a stereo
pair. If using only one microphone, use Register 0xE2, Bit 7, to
set it as mono input.
The bit clock required for the digital microphone is available at
the DMIC_CLK pin (Ball A4), and the drive capability can be
set using Register 0xE9, Bit 3.
DMIC4
08975-107
DMIC3
Figure 95. Digital Microphone Connection Diagram for Four Microphones
Rev. 0 | Page 52 of 296
ADAU1373
DIGITAL AUDIO INTERFACE
The ADAU1373 provides three digital audio interface ports:
Digital Audio Interface A, Digital Audio Interface B, and Digital
Audio Interface C. Each port can receive and transmit audio data in
various serial formats. The ports can be configured as master or
slave, accommodating many possible system design combinations.
Each port has a frame clock (LRCLKA to LRCLKC), a bit clock
(BCLKA to BCLKC), and data receive and data transmit pins
(SDATAINA to SDATAINC and SDATAOUTA to SDATAOUTC)
available. The possible serial audio data formats are right justified,
left justified, I2S, and DSP mode. The format for the ports can be
set using Register 0x44 for Digital Audio Interface A, Register 0x45
for Digital Audio Interface B, and Register 0x46 for Digital Audio
Interface C. The serial data is received or transmitted MSB first,
followed by the remaining data bits. For more information about
the serial data input/output formats, see Figure 98 to Figure 100.
The registers allow each port to be set independently, as either
master or slave. In addition, these registers provide controls for
bit clock polarity, swapping left/right data, inverting the frame
clock, and adjusting data width. Figure 97 shows the audio
interface and ASRC block diagram.
Digital Audio Interface A, Digital Audio Interface B, and Digital
Audio Interface C can go through the ASRC or directly to the
internal digital engine. The ASRCs on each port allow system
design flexibility to accommodate sample rates at the ports that
are different from those accommodated by the internal DSP.
The digital audio interface ports can be independently configured
as master or slave by using the MSx bit (Bit 6) in Register 0x44,
Register 0x45, and Register 0x46 for Digital Audio Interface A,
Digital Audio Interface B, and Digital Audio Interface C, respectively. This allows a number of different options for using the
three ports.
When the ports are configured in master mode, the ports derive
the bit clock and frame clock using either AIFCLKA or AIFCLKB,
which are derived from PLLA and PLLB, respectively. The sample
rate can be selected using Bits[4:2] in Register 0x47, Register 0x48,
and Register 0x49 for Digital Audio Interface A, Digital Audio
Interface B, and Digital Audio Interface C, respectively.
In slave mode, the port accepts the bit clock and the frame clock
from the master in the system. If the ASRCs are enabled, the
port is not required to be synchronous to the master clock.
However, if the ASRCs are disabled, ensure that the port is
synchronous to the master in the system by providing the
master clock from the respective master.
DAC1
DAC2
ADC/
DMCA
DMCB
CODEC
ENGINE
fS_A_INT
BCLK_A
DOUT_A
DIGITAL
AUDIO
INTERFACE A
DOUT_A
fS_DSP
BCLK_DSP
ASRCA
DOUT_DSP
DIN_A
DIN_DSP
fS_B_EXT
fS_B_INT
fS_DSP
BCLK_B
BCLK_B
BCLK_DSP
DIN_A
DOUT_B
DIN_B
DIGITAL
AUDIO
INTERFACE B
DOUT_B
DIN_B
fS_C_EXT
fS_C_INT
BCLK_C
BCLK_C
DOUT_C
DIN_C
DIGITAL
AUDIO
INTERFACE C
AIFCLKA
DOUT_C
ASRCB
DIN_DSP
MIX/MUX
AIFB_REC
AIFB_PB
FDSP_CH2_DOUT
FDSP_CH2_DIN
DSP
FDSP_CH3_DOUT
FDSP_CH3_DIN
fS_DSP
BCLK_DSP
ASRCC
DIN_C
AIFCLKB
(256 × fS)
DOUT_DSP
AIFA_REC
AIFA_PB
DOUT_DSP
DIN_DSP
AIFC_REC
AIFC_PB
FDSP_CH4_DOUT
FDSP_CH4_DIN
ASRC CLK
(256 × fS)
FDSP CLK (128 × fS )
Figure 97. Digital Audio Interface and ASRC Block Diagram
Rev. 0 | Page 53 of 296
08975-015
fS_A_EXT
BCLKA
ADAU1373
The mode selection is performed by writing to the FORMATx
bits (Bits[1:0]) of the digital audio interface settings registers
(Register 0x44, Register 0x45, and Register 0x46). All modes
are MSB first and operate with data of 16 bits to 32 bits.
SERIAL DATA INPUT/OUTPUT FORMATS
The flexible serial data input and output ports of the ADAU1373
can be set to accept or transmit data in 2-channel format. Data
is processed in twos complement, MSB first format. The left
channel data field always precedes the right channel data field
in 2-channel streams. The digital audio input can support the
following audio formats:
I2S mode
Left justified
Right justified
Digital signal processor (DSP) mode
LRCLKx
LEFT CHANNEL
RIGHT CHANNEL
BCLKx
LSB
MSB
LSB
MSB
08975-017
SDATAINx,
SDATAOUTx
1/fS
Figure 98. I2S Mode—16 Bits to 24 Bits per Channel
MSB
LSB
MSB
LSB
08975-018
SDATAINx,
SDATAOUTx
RIGHT CHANNEL
LEFT CHANNEL
LRCLKx
BCLKx
1/fS
Figure 99. Left-Justified Mode—16 Bits to 24 Bits per Channel
RIGHT CHANNEL
LEFT CHANNEL
SDATAINx,
SDATAOUTx
MSB
LSB
MSB
LSB
1/fS
Figure 100. Right-Justified Mode—16 Bits to 24 Bits per Channel
1/fS
LEFT CHANNEL
RIGHT CHANNEL
LRCLKx
SDATAINx/
SDATAOUTx
1
2
3
N
1
2
3
08975-034
BCLKx
N
Figure 101. DSP/Pulse Code Modulation (PCM) Mode Audio Interface Submode 1 (SM1), Register 0x44 to Register 0x46, Bit LRPx = 0
1/fS
LEFT CHANNEL
LRCLKx
RIGHT CHANNEL
FALLING EDGE CAN OCCUR ANYWHERE IN THIS AREA
BCLKx
SDATAINx/
SDATOUTx
1
2
3
N
1
2
3
N
Figure 102. DSP/PCM Mode Audio Interface Submode 2 (SM2), Register 0x44 to Register 0x46, Bit LRPx = 1
Rev. 0 | Page 54 of 296
08975-019
LRCLKx
BCLKx
08975-035
•
•
•
•
The serial data clocks must be synchronous with the ADAU1373
master clock input. The LRCLKx (Ball D3, Ball E2, and Ball F1)
and BCLKx (Ball D2, Ball E4, and Ball F2) pins are used to
clock both the serial input and output ports. The ADAU1373
can be set as the master or the slave in a system. See Figure 98 to
Figure 102 for the proper configurations for standard audio
data formats.
ADAU1373
ASYNCHRONOUS SAMPLE RATE CONVERTER
The ADAU1373 includes three bidirectional ASRCs to convert
the sample rate for the selected digital audio interface port. The
ASRCs can be set in automatic ratio detect mode to calculate the
required ratio between the input and internal sample rate. This
mode writes the value in Register 0x4A and Register 0x4B for
Digital Audio Interface A, Register 0x4C and Register 0x4D for
Digital Audio Interface B, and Register 0x4E and Register 0x4F for
Digital Audio Interface C. The automatic ratio detect can be
disabled, and the fractional value can be written into the same
registers for manual setting. The maximum sample rate is 48 kHz
for the ASRC, as well as for the internal DSP. This sets the limitation on the ASRC such that the interface port sample rate
must be equal to or less than the internal core sample rate.
The output-to-input sample rate ratio number is split into the
integer part and the fractional part. The integer part is three bits
wide, and the fractional part is 12 bits wide. The total available
range is 1:8 to 8:1.
The ASRC is bidirectional and converts the sample rate at the
port side to the DSP side and vice versa. The DSP side of the
ASRC always works at the core sample rate and should be the
highest sample rate of all the ports.
Register 0x4A to Register 0x4F can be used to set the ASRC ratio
manually for ASRCA, ASRCB, and ASRCC. The following
section explains the manual setting of the sample rate
conversion ratio.
Manual Setting of Sample Rate Conversion Ratio
Bits[6:4] in Register 0x4A contain the SRCAINT bits for the
integer portion; and the SRCARFRE_HI bits (Bits[3:0]), along
with the SRCAFRE_LOW bits (Bits[7:0] in Register 0x4B), form
the total 12-bit fractional portion.
Bits[6:4] in Register 0x4C contain the SRCBINT bits for the
integer portion; and the SRCBRFRE_HI bits (Bits[3:0]), along
with the SRCBRFRE_LOW bits (Bits[7:0] in Register 0x4D),
form the total 12-bit fractional portion.
Bits[6:4] in Register 0x4E contain the SRCCINT bits for the
integer portion; and the SRCCRFRE_HI bits (Bits[3:0]), along
with the SRCCRFRE_LOW bits (Bits[7:0] in Register 0x4F),
form the total 12-bit fractional portion.
The fractional part is 12 bits wide with an upper nibble
(Bits[11:8]) and a lower byte (Bits[7:0]). The upper bits are set
using Register 0x4A, Register 0x4C, and Register 0x4E, Bits[3:0]
(SRCxRFRE_HI) and the lower byte is set using Register 0x4B,
Register 0x4D, and Register 0x4F, Bits[7:0] (SRCxRFRE_LOW)
for Digital Audio Interface A, Digital Audio Interface B, and
Digital Audio Interface C, respectively.
Example A
If the target sample rate is 48 kHz and the source sample rate is
44.1 kHz, then
48/44.1 = 1.088435
Separate the integer portion, which is 1, and the fractional
portion, which is 0.088435.
For the integer value of the ratio in hexadecimal format, set
SRCxINT, Bits[2:0] = 0x1 (hexadecimal).
Next, to enter the fractional value, first convert the number to
a 12-bit integer and then to hexadecimal format.
0.088435 × 4096 = 362.231 ≈ 362 = 0x16A (hex)
The upper nibble is 0x1 (hexadecimal), whereas the lower byte
is 0x6A (hexadecimal).
That is, SRCxRFRE_HI, Bits[3:0] = 0x1, and SRCxRFRE_LOW,
Bits[7:0] = 0x6A.
Example B
If the target sample rate is 44.1 kHz and the source sample rate
is 8 kHz, then
44.1/8 = 5.5125
Separate the integer portion, which is 5, and the fractional
portion, which is 0.5125.
For the integer value of the ratio in hexadecimal format, set
SRCxINT, Bits[2:0] = 0x5 (hexadecimal).
Next, to enter the fractional value, first convert the number to
a 12-bit integer and then to hexadecimal format.
0.5125 × 4096 = 2099.2 ≈ 131 = 0x83 (hex)
The upper nibble is 0x0 (hexadecimal), whereas the lower byte
is 0x83 (hexadecimal).That is, SRCxRFRE_HI, Bits[3:0] = 0x0,
and SRCxRFRE_LOW, Bits[7:0] = 0x83.
The ratio can be calculated using the following steps:
1.
2.
3.
4.
Calculate the ratio.
Split the ratio number into integer and fractional parts.
Set M as the integer part of fS_DSP/fS_x_INT or fS_DSP/fS_x_EXT,
and set N as the fractional part.
Integer Part M can be set from 1 to 8 using Register 0x4A,
Register 0x4C, and Register 0x4E, Bits[6:4] (SRCxINT),
for ASRCA, ASRCB, and ASRCC, respectively.
Round Fractional Part N, using the following equation:
ROUND (N × 212) = ROUND (N × 4096)
5.
Convert the number to hexadecimal format.
Rev. 0 | Page 55 of 296
ADAU1373
as DAC1 and DAC2. The digital volume controls on each of the
inputs, as well as the outputs, can be used to adjust the levels. The
soft mode allows the volume to be updated for clickless operation.
MIX/MUX
The ADAU1373 provides very flexible mixing and multiplexing
of the digital signals to and from the DSP and to and from the
codec/Digital Audio Interface A/Digital Audio Interface B/
Digital Audio Interface C.
The input mixing and routing matrix allows the digital data from
Digital Audio Interface A, Digital Audio Interface B, and Digital
Audio Interface C, as well as the ADC and digital microphone,
to be selected or mixed to any of the DSP input channels (that is,
DSP Channel 0 to DSP Channel 4). Similarly, the output mixing
and routing matrix allows the data from DSP Channel 0 to DSP
Channel 4 to be mixed and routed to Digital Audio Interface A,
Digital Audio Interface B, and Digital Audio Interface C, as well
For recording purposes, the data from the ADC or the digital
microphone can be sent to Digital Audio Interface A, Digital
Audio Interface B, and Digital Audio Interface C. Similarly, for
playback, the data from the ports can be sent to the DACs and
then to the analog outputs. The mixing block allows complete
record and playback datapaths.
DSPOUT_CH0
INTERFACE_A
DSPOUT_CH1
INTERFACE_B
DSPOUT_CH2
INTERFACE_C
ADC
The routing matrix also allows the data to be looped back from
the internal ADC to the DACs or from Digital Audio Interface A
to Digital Audio Interface B or Digital Audio Interface C.
INTERFACE_A
DSPOUT_CH3
DSPIN_CH0
DSPOUT_CH4
ADC_LRSWAP
DMIC
DMICLRSWAP
DSPOUT_CH0
INTERFACE_A
DSPOUT_CH1
INTERFACE_B
DSPOUT_CH2
INTERFACE_C
ADC
INTERFACE_B
DSPOUT_CH3
DSPIN_CH1
DSPOUT_CH4
ADC_LRSWAP
DMIC
DMICLRSWAP
DSPOUT_CH0
INTERFACE_A
DSPOUT_CH1
INTERFACE_B
DSPOUT_CH2
INTERFACE_C
ADC
DSPIN_CH2
DSP
INTERFACE_C
DSPOUT_CH3
DSPOUT_CH4
ADC_LRSWAP
DMIC
DMICLRSWAP
DSPOUT_CH0
INTERFACE_A
DSPOUT_CH1
INTERFACE_B
DSPOUT_CH2
INTERFACE_C
ADC
DSPIN_CH3
DAC1
DSPOUT_CH3
DSPOUT_CH4
ADC_LRSWAP
DMIC
DMICLRSWAP
DSPOUT_CH0
INTERFACE_A
DSPOUT_CH1
INTERFACE_B
DSPOUT_CH2
INTERFACE_C
ADC
ADC_LRSWAP
DSPIN_CH4
DAC2
DSPOUT_CH3
DSPOUT_CH4
08975-036
DMIC
DMICLRSWAP
Figure 103. Digital Mix/Mux Block
Rev. 0 | Page 56 of 296
ADAU1373
DE-EMPHASIS
PRE
HPF
INTERFACE B
INPUT
DE-EMPHASIS
PRE
HPF
INTERFACE C
INPUT
DE-EMPHASIS
PRE
HPF
ADC
OUTPUT
PRE
HPF
DIGITAL MIC
OUTPUT
PRE
HPF
ALC
1
2
FDSP_PRE_
MIX_MUX
MDRC
7-BAND
BIQUAD
FDSP_DIN0
FDSP_DOUT0
INTERFACE A
OUTPUT
FDSP_DIN1
FDSP_DOUT1
INTERFACE B
OUTPUT
FDSP_DIN2
FDSP
FDSP_DOUT2
INTERFACE C
FDSP_POST_ OUTPUT
MIX_MUX
FDSP_DIN3
FDSP_DOUT3
DAC1 INPUT
FDSP_DIN4
FDSP_DOUT4
DAC2 INPUT
3D
BASS
DRC
1
2
3
NOTE: EITHER MDRC OR DRC CAN BE
USED AT A TIME
POST
HPF
08975-037
INTERFACE A
INPUT
Figure 104. Fixed Function DSP (FDSP) Input and Output Connections and Available Processing Blocks
the last three LSB bits. Register 0xBD provides an individual
control bit for each filter enable or disable.
FIXED FUNCTION DSP (FDSP)
Figure 104 shows the fixed function DSP input and output
connections, as well as the available processing blocks. The
FDSP works at a 128 × fS clock rate and has five input and
output channels.
The pre-HPF frequency transfer function is as follows:
H ( z) =
The five high-pass filters are available at the input channels to
help remove the dc offset. In addition, the following blocks are
provided to enhance the signal:
•
•
•
•
•
•
ALC
MDRC or three full-band DRCs
Seven-band EQ
3D enhancement
Bass enhancement
High-pass filter
1+ a
1 − z −1
×
2
1 − a × z −1
where Parameter a is determined by the cutoff frequency, fC,
and related to the sample rate, fS. Use the following equations to
calculate Parameter a:
WC = 2 × π × fC/fS
a = 1 − sin wc
cos wc
For the pre-HPF, the coefficients are quantized to 10 bits, so
that the decimal integer values of these coefficients are as
follows:
HIGH-PASS FILTERS (HPFs)
aINT = round(a × 2048)
The ADAU1373 provides five fully programmable HPFs in front
of the data path and one configurable HPF following the FDSP
blocks.
The five fully programmable HPFs (called pre-HPFs) are used
to remove the dc content or the low frequency components from
the input signals. An additional HPF, located at the end of the
FDSP chain and called the post-HPF, is designed to remove dc
or low frequency components that may be introduced by the
nonlinear processing in the FDSP blocks. All of these HPFs are
first-order IIR with changeable 3 dB cutoff frequencies.
Pre-HPFs
All coefficients of the five pre-HPFs are in 11-bit format and fully
programmable. Each coefficient takes up two register addresses,
from Register 0xB3 to Register 0xBC. For each coefficient, the
first register is the first eight MSB bits, and the second register is
Pre-HPF Working Example
If the required cutoff frequency for the first pre-HPF is 900 Hz
and the sampling rate is 48 kHz, then
wC = 2 × π × fC/fS = 0.1178097
a = 1− sin wc = 0.8886221
cos wc
aINT = round(a × 2048) = 1820
aHEX = 71C
Therefore, set Bits[7:0] in Register 0xB3, Register 0xB5,
Register 0xB7, Register 0xB9, and Register 0xBB as the MSBs
and Bits[2:0] in Register 0xB4, Register 0xB6, Register 0xB8,
Register 0xBA, and Register 0xBC as the LSBs for the pre-HPFs.
Rev. 0 | Page 57 of 296
ADAU1373
Post-HPFs
MDRC
The post-HPF cutoff frequency is selectable via Register 0x7D,
Bits[7:3] as 3.7 Hz for dc removal or from 50 Hz up to 800 Hz,
with a 50 Hz step for low frequency component filtering. This
HPF block can be enabled or disabled for the left or right channel,
controlled by Register 0x7D, Bits[1:0]. The HPF calculates the
dc value of the signal, which is subtracted from the signal when
enabled. When the HPF block is disabled, Bit 2 of Register 0x7D
determines whether the calculated dc value is maintained and
subtracted from the input signal or cleared to 0.
The MDRC provides a multiband dynamic range control by splitting the signal into three bands, depending on the frequency: low,
mid, and high. Each of the bands is processed separately, and
individual controls are provided for each band DRC. The MDRC
can be enabled or disabled by the MDRC_EN bit (Register 0xB2,
Bit 0) (see the MDRC block diagram in Figure 106).
Figure 105 shows the post-HPF frequency response plots for
various cutoff frequency settings.
The 3 dB cutoff frequency of the HPF can be set from 50 Hz to
800 Hz in 50 Hz steps, configured using the MDRC_HPF bits
(Register 0xB0, Bits[5:2]).
The 3-band MDRC is composed of a second-order high-pass
IIR filter, a second-order low-pass IIR filter, the frequency
splitter, and three individual DRCs for low, mid, and high bands.
0
The LPF cutoff frequency can be set to 4 kHz, 8 kHz, or 20 kHz
via the MDRC_LPF bits (Register 0xB0, Bits[1:0]).
–5
The HPF and LFP can be enabled or disabled by using the
MDRC_LPFEN and MDRC_HPFEN bits in Register 0xB2.
–15
The crossover frequencies between the low band and high band
are defined in Register 0xB1 by the MDRC_CROSS_LOW bits
(Bits[3:0]) and the MDRC_CROSS_HIGH bits (Bits[7:4]). The
crossover frequency between low band and mid band can be
varied from 100 Hz to 1600 Hz in steps of 100 Hz. The crossover
frequency for the mid-to-high bands can be varied from 1 kHz
to 16 kHz in steps of 1 kHz.
–20
–25
–30
–40
20
100
1k
08975-038
–35
5k
FREQUENCY (Hz)
All of the previous frequency values are based on a 48 kHz
sampling rate. If the input signals are of a different sampling rate,
the values should be scaled accordingly.
Figure 105. Post-HPF Frequency Response
DYNAMIC RANGE CONTROL (DRC)
Using the DRC
The DRC is used to control the dynamic range of the signal.
It provides the capability to match the dynamic range of the
incoming signal with the dynamic range of the signal fed to the
next block or device without losing the signal-to-noise ratio.
The ADAU1373 provides three DRCs that can be used as full band.
The DRCs are shared between full-band DRC or MDRC. When
the full-band DRCs are in use, the MDRC is not available. For fullband DRC, the crossover filters can be disabled in Register 0xB2
via the MDRC_HPFEN bit (Bit 1) and the MDRC_LPFEN bit
(Bit 2). Each of the three DRCs has its own registers: Register 0x80
to Register 0x8F for DRC1, Register 0x90 to Register 0x9F for
DRC2, and Register 0xA0 to Register 0xAF for DRC3, plus enable
or disable bits, which are set by the DRCEN bits (Bits[1:0]) in
Register 0x8D, Register 0x9D, and Register 0xAD.
The ADAU1373 provides three full-band DRCs or one multiband
DRC (MDRC). However, at any given time, either the three fullband DRCs or the MDRC can be used. Register 0x80 through
Register 0xB2 are used for setting the MDRC or full-band DRCs.
The MDRC and the seven-band EQ share the same register
addresses (Register 0x80 through Register 0xBD). Therefore, for
the MDRC, ensure that the EQ coefficient writing enable bit
(EQ_WR_EN, Bit 0 in Register 0xBE) = 0; whereas for the
seven-band EQ, the EQ_WR_EN bit = 1.
DRC
LOW BAND
FREQUENCY
SPLITTER
HPF
LPF
50Hz TO 800Hz
(50Hz STEP)
4kHz/
8kHz/20kHz
DRC
MID BAND
|H(f)|
f
DRC
HIGH BAND
Figure 106. MDRC Block Diagram
Rev. 0 | Page 58 of 296
08975-039
MAGNITUDE (dBFS)
–10
ADAU1373
•
•
•
The DRCNGSRC bit (Bit 5) can be used for selecting the
noise gate detector.
The DRCCESRC bit (Bit 4) can be used for selecting the
compressor/expander detector.
The DRCLMSRC bit (Bit 3) can be used for selecting the
limiter detector.
OUTPUT
LIMITER
POINT1
COMPRESSOR
EXPANDER
DRCTHY3
DRCTHY4
The DRC can be set to function as limiter, compressor,
expander, or noise gate. See Figure 107 for the input/output plot
showing the various modes of operation of the DRC.
The DRC allows flexibility in setting up the thresholds, as well
as attack and release time controls. The DRC allows independent
adjustment of the thresholds by providing control of the x-axis
and y-axis using Register 0x82 to Register 0x89 for DRC1,
Register 0x92 to Register 0x99 for DRC2, and Register 0xA2
to Register 0xA9 for DRC3. Bit DRCTHX1 to Bit DRCTHX4 in
these registers can be used to set the input level threshold point
on the x-axis, and Bit DRCTHY1 to Bit DRCTHY4 can be used
to set the output level point on the y-axis. The available range is
−96 dB to 0 dB for each threshold.
POINT2
DRCTHY1
DRCTHY2
POINT3
POINT4
NOISE GATE
DRCTHX4 DRCTHX3
DRCTHX2 DRCTHX1
INPUT
08975-040
The DRCs consist of both peak and rms signal detectors.
Either the peak or the rms detector can be assigned for noise gate,
compressor/expander, and limiter. Bits[5:3] in Register 0x8D,
Register 0x9D, and Register 0xAD are provided for selecting the
detectors, as follows:
Figure 107. DRC Output vs. Input Plot
The DRC gain can be set using the DRCG bits (Bits[5:2]) in
Register 0x8C, Register 0x9C, and Register 0xAC. The range
available is −24 dB to +21 dB. See Table 19 for a listing of the
DRC detector selection registers and bits and their functions.
Table 20 lists the registers and bits that control the dynamic
behavior of the DRC.
Table 19. DRC Setting Bits and Functions
Register Address
0x8C, 0x9C, 0xAC
0x8D, 0x9D, 0xAD
0x8D, 0x9D, 0xAD
0x8D, 0x9D, 0xAD
0x8D, 0x9D, 0xAD
0x8D, 0x9D, 0xAD
0x8D, 0x9D, 0xAD
0x8D, 0x9D, 0xAD
Bits
[5:2]
7
6
5
4
3
2
[1:0]
Bit Name
DRCG
DRCNGTGT
DRCNGHDEN
DRCNGSRC
DRCCESRC
DRCLMSRC
DRCNGEN
DRCEN
Description
Sets the DRC gain; available range is from −24 dB to +21 dB.
Sets the DRC noise gate target.
Enables or disables the DRC noise gate recovery hold.
Selects the DRC noise gate level detector; selects either rms or peak detector.
Selects the DRC compressor/expander level detector; selects either rms or peak detector.
Selects the DRC limiter level detector; selects either rms or peak detector.
Noise gate enable control; provides independent noise gate control.
DRC enable control; enables or disables the DRC. The input source for the DRC can be
selected as left channel, right channel, or both.
Table 20. DRC Dynamic Behavior Control
Register Address
0x80, 0x90, 0xA0
0x81, 0x91, 0xA1
0x81, 0x91, 0xA1
0x8A, 0x9A, 0xAA
0x8A, 0x9A, 0xAA
0x8B, 0x9B, 0xAB
Bits
[3:0]
[7:4]
[3:0]
[7:4]
[3:0]
[7:4]
Bit Name
DRCLELTAV
DRCLELATT
DRCLELDEC
DRCGSATT
DRCGSDEC
DRCHTNOR
0x8B, 0x9B, 0xAB
[3:0]
DRCHTNG
Description
Sets rms signal detector averaging time. Available range is from 750 μs to 24.576 sec.
Sets DRC attack time. Available range is 46.875 μs to 1.536 sec.
Sets DRC decay (release) time. Available range is 0.75 ms to 24.576 sec.
Sets DRC gain smooth attack time. Available range is 46.875 μs to 1.536 sec.
Sets DRC gain smooth decay time. Available range is 0.75 ms to 24.576 sec.
Sets DRC normal operation hold time. Available range is from 0 ms up to 1.37 sec; value
increments by 2× the previous value, beginning with 0.67 ms.
Sets DRC noise gate hold time. Available range is from 0 ms up to 1.37 sec; value increments by
2× the previous value, beginning with 0.67 ms.
Rev. 0 | Page 59 of 296
ADAU1373
1.0
LIMITER THRESHOLD
(DRCTHX1)
0.5
1.0
x10–4
NOISE GATE
THRESHOLD
(DRCTHX4)
0.5
0
0
–0.5
–0.5
–1.0
0.2
–1.0
INPUT
LIMITER TARGET LEVEL
(DRCTHY1)
0
1000
2000
3000
INPUT
4000
5000
6000
1000
2000
3000
OUTPUT
4000
5000
6000
x10–4
2
0.1
1
0
0
–0.1
–1
RELEASE (DECAY) TIME
(NO HOLD TIME)
(DRCTHY1)
–14
OUTPUT
–2
ATTACK TIME
(DRCLELATT)
–16
0
–20
–10
1000
2000
3000
4000
5000
DRC GAIN (dB)
6000
7000
8000
–20
08975-041
0
NOISE GATE RECOVERY
(DECAY) TIME
ATTACK
TIME
10
–18
–22
0
HOLD
TIME FOR
NOISE GATE
–30
0
1000
2000
Figure 108. Limiter Dynamic Behavior—Working Example
3000
4000
DRC GAIN (dB)
5000
6000
08975-043
–0.2
Figure 110. Noise Gate Dynamic—Working Example
1.0
Working Example
0.5
0
If the required LPF cutoff frequency is 20 kHz, the HPF cutoff
frequency is 350 Hz, low band crossover frequency is 1 kHz, and
high band crossover frequency is 8 kHz, as shown in Figure 111.
–0.5
–1.0
INPUT
0.2
0.1
H(f)
0
–0.1
–0.2
OUTPUT
0
1000
2000
3000
4000
5000
DRC GAIN (dB)
6000
7000
8000
350
Figure 109. Limiter Dynamic—Working Example Showing Hold Time
MID
BAND
1000
HIGH
BAND
8000
20000
fIN (Hz)
08975-044
LOW
BAND
HOLD TIME DURING
RECOVERY
(DRCHTNOR)
08975-042
–14
–15
–16
–17
–18
–19
–20
–21
Figure 111. MDRC Example
The DRC can generate an interrupt request when enabled. See
Table 21 for a listing of the interrupt request register and bit
controls.
•
•
•
To configure MDRC HPF and LPF, set Register 0xB0 to 0x1A.
To configure MDRC crossover frequencies, set Register 0xB1
to 0x79.
To enable MDRC HPF and LPF, set Register 0xB2 to 0x07.
Table 21. Interrupt Request Register and Bit Controls
Register
Address
0x8F, 0x9F, 0xAF
Bits
1
Bit Name
DRCIRQ_MODE
0x8F, 0x9F, 0xAF
0x8E, 0x9E, 0xAE
0
[6:2]
DRCIRQ_EN
SIG_DET_RMS
0x8E, 0x9E, 0xAE
[1:0]
SIG_DET_PK
Function
DRC interrupt mode. 0: selects the input signal rms value as the interrupt source; 1: selects the
ratio between the peak and rms signal of the input signal.
DRC interrupt enable.
RMS detector level. Defines the rms value above which the IRQ circuits send out the
interruption signal when the DRCIRQ_MODE bit = 0. Available range: −76.5 dB to −30 dB.
Peak to rms detector ratio. Defines the peak to rms value above which the IRQ circuits send
out the interruption signal when the DRCIRQ_MODE bit = 1. Available range: 12 dB to 30 dB.
Rev. 0 | Page 60 of 296
ADAU1373
BIQUAD2
BIQUAD3
BIQUAD4
BIQUAD5
SEVEN-BAND EQUALIZER
FIRSTORDER
IIR 1
FIRSTORDER
IIR 1
08975-045
BIQUAD1
Figure 112. Seven-Band Equalizer Block Diagram
PROGRAMMABLE SEVEN-BAND EQUALIZER
The programmable seven-band equalizer is composed of five
biquad filters (Band 1 to Band 5) and two first-order IIR filters
(Band 6 and Band 7). See Figure 112 for a system block diagram.
The EQ shares Register 0x80 through Register 0xBD with the
MDRC. All the filter coefficients are programmable via the
corresponding registers. The filter bank can also be configured
as some other filters, including de-emphasis and notch filter,
when all five midfrequency bands are not needed.
Table 22. Register 0x80 to Register 0xBD EQ Coefficients
Register
Address
0x80
0x81
0x82
0x83
0x84
0x85
...
0xBC
0xBD
Bit Name
EQ1_COEF0_HI[15:8]
EQ1_COEF0_LO[7:0]
EQ1_COEF1_HI[15:8]
EQ1_COEF1_LO[7:0]
EQ1_COEF2_HI[15:8]
EQ1_COEF2_LO[7:0]
...
EQ7_COEF2_HI[15:8]
EQ7_COEF2_LO[7:0]
Descripton
EQ Band 1, Coefficient 0 MSB
EQ Band 1, Coefficient 0 LSB
EQ Band 1, Coefficient 1 MSB
EQ Band 1, Coefficient 1 LSB
EQ Band 1, Coefficient 2 MSB
EQ Band 1, Coefficient 2 LSB
...
EQ Band 7, Coefficient 2 MSB
EQ Band 7, Coefficient 2 LSB
To operate as a seven-band equalizer, the two first-order IIR filters
are usually configured as one low-pass shelving filter and one
high-pass shelving filter, and the biquad filters are configured as
peak filters.
The first-order IIR filter cutoff frequency and gain are adjustable
using the filter coefficient registers. In addition, the five biquad
filters have adjustable gain, the center frequency for the peak
filters, or cutoff frequency for shelving filters. For a frequency
band that is <200 Hz, the low-pass shelving filter is
recommended instead of a peak filter.
The biquad common peaking filter transfer function for Band 1
through Band 5 is as follows:
H ( z) =
p0 + p1 × z −1 + p2 × z −2
1 − d1 × z −1 − d2 × z − 2
The filter coefficients can be calculated using the previous two
equations or by using the GUI provided. See the Register
Map—EQ Coefficients section for register addresses.
Register 0xBE and Register 0xBF are used for EQ control. The
EQ_FORMAT bit (Register 0xBE, Bit 2) defines the coefficient
bit format. The default setting is 0, and the corresponding format
is Q3.13. In this default mode, the supported coefficients range
from −4 ~ +4. For equalization, this range means that the cutoff/
center frequencies can vary from 40 Hz to 12 kHz when the input
sampling rate is 48 kHz, and peak gain varies from −18 dB to
+18 dB. When Register 0xBE, Bit 2 = 1, the EQ format changes
to Q4.12 to achieve a larger coefficient range (from −8 ~ +8).
This mode enables larger gain boost or cut range.
On-the-fly coefficient updates are supported. If the filter bank
coefficients are updated in this mode, the EQ_UPD bit (Bit 1,
Register 0xBE) should be set to 1 after the I2C coefficient write
finishes. This setting updates the filter coefficients for the filter
desired. The coefficient update procedure takes about 0.05 ms.
The EQ_UPDING bit (Bit 4, Register 0xBE) is a read-only bit
that represents the coefficient update status. This bit should be
read to check the status of the coefficient update process. When
the EQ_UPDING bit is set to 1, the update is in process; when
the EQ_UPDING bit is set to 0, the update is complete.
If the system clock is lost during the updating period, the update
procedure cannot be completed and, in such a case, it is recommended that the EQ_UPD_CLR bit (Bit 3, Register 0xBE) be set
to 1 to cancel the update.
Register 0x80 to Register 0xBD make up the EQ coefficient address.
These addresses are also used by other registers. Therefore, when
the EQ coefficient read/write access is required, the write/read
enable bit, EQ_WR_EN (Register 0xBE, Bit 0), should be set to 1.
Register 0xBF is used for EQ enable/disable control. To save power,
the filter bank can be disabled, and all of the seven bands can be
bypassed. Bit EQEN and Bit EQBP7 to Bit EQBP1 in Register 0xBF
can be used to enable or disable the desired EQ band.
The shelving filter transfer function for Band 6 and Band 7 is
H ( z) =
p0 + p1 × z −1
1 − d1 × z −1
Rev. 0 | Page 61 of 296
ADAU1373
Table 23. Bit Map of Register 0xBE, EQ_CTRL1
D7
D6
D5
RESERVED
D4
EQ_UPDING
D3
EQ_UPD_CLR
D2
EQ_FORMAT
D1
EQ_UPD
D0
EQ_WR_EN
Table 24. Bit Descriptions for Register 0xBE, EQCTRL1
Bit Name
EQ_UPDING
Description
EQ coefficient update status
EQ_UPD_CLR
EQ coefficient update cancel
EQ_FORMAT
EQ coefficient format selection
EQ_UPD
EQ coefficient registers update flag
EQ_WR_EN
EQ coefficient read/write enable
Bit Settings
0: EQ coefficient update is complete or no update
1: EQ coefficient updating
0: normal operation
1: cancel/interrupt EQ coefficient update
0: normal operation
1: large gain
1: update
0: no update
1: EQ coefficient read/write enable
0: EQ coefficient read/write disable
Table 25. Bit Map of Register 0xBF, EQ_CTRL2
D7
EQEN
D6
EQBP7
D5
EQBP6
D4
EQBP5
D3
EQBP4
D2
EQBP3
D1
EQBP2
Table 26. Bit Descriptions for Register 0xBF, EQCTRL2
Bit Name
EQEN
Description
EQ enable
EQBP7
EQ Band 7 bypass when EQ enabled
EQBP6
EQ Band 6 bypass when EQ enabled
EQBP5
EQ Band 5 bypass when EQ enabled
EQBP4
EQ Band 4 bypass when EQ enabled
EQBP3
EQ Band 3 bypass when EQ enabled
EQBP2
EQ Band 2 bypass when EQ enabled
EQBP1
EQ Band 1 bypass when EQ enabled
Rev. 0 | Page 62 of 296
Bit Settings
1: EQ enabled
0: EQ disabled
1: bypass EQ Band 7
0: no bypass
1: bypass EQ Band 6
0: no bypass
1: bypass EQ Band 5
0: no bypass
1: bypass EQ Band 4
0: no bypass
1: bypass EQ Band 3
0: no bypass
1: bypass EQ Band 2
0: no bypass
1: bypass EQ Band 1
0: no bypass
D0
EQBP1
ADAU1373
2.
COEFFICIENT CALCULATIONS
Calculate the double precision coefficients.
Peak Filter Setting
(1 − sin(
With fS as the input signal sampling frequency, fC as the
required peak filter center frequency, BW as the bandwidth,
and G (dB) as the gain, use the following steps for coefficient
calculation:
1.
α=
cos(
(1 + k ) + (1 − k ) × α
2
k = 10 20
p1 =
(k − 1) + (1 + k ) × α
2
Calculate the double precision coefficients.
d1 = α
BW
(1 − sin(
× 2π ))
fS
α=
BW
cos(
× 2π )
fS
β = cos(
p0 =
3.
p2 =
fC
× 2π )
fS
4.
(1 + k ) + (1 − k ) × α
2
Transfer the decimal integer values to twos complement
hexadecimal values.
High-Pass Shelving Filter
The high-pass shelving filter transfer function is
(1 − k ) + (1 + k ) × α
2
H ( z) =
d1 = (1 + α ) × β
d2 = − α
Transfer the double precision coefficients to integer values
represented by registers.
With fS as the input signal sampling frequency, fC as the required
filter cutoff frequency, and G (dB) as the gain, use the following
steps for coefficient calculation:
1.
Transfer the gain in decibels (dB) to decimal domain.
k = 10 20
2.
Calculate the double precision coefficients.
(1 − sin(
α=
Transfer the decimal integer values to 16-bit, twos
complement hexadecimal values.
cos(
Low-Pass Shelving Filter
p0 + p1 × z −1
1 − d1 × z −1
With fS as the input signal sampling frequency, fC as the required
filter cutoff frequency, and G (dB) as the gain, use the following
steps for coefficient calculation:
1.
fC
× 2π ))
fS
fC
× 2π )
fS
p0 =
(1 + k ) − (1 − k ) × α
2
p1 =
(1 − k ) − (1 + k ) × α
2
The low-pass shelving filter transfer function is
H ( z) =
p0 + p1 × z −1
1 − d1 × z −1
G
p0 = round(p0 × 8192)
p1 = round(p1 × 8192)
p2 = round(p2 × 8192)
d1 = round(d1 × 8192)
d2 = round(d2 × 8192)
4.
Transfer the double precision coefficients to integer values
represented by registers.
p0 = round(p0 × 8192)
p1 = round(p1 × 8192)
d1 = round(d1 × 8192)
p1 = − (1 + α ) × β
3.
fC
× 2π )
fS
p0 =
Transfer the gain in decibels (dB) to decimal domain.
G
2.
fC
× 2π ))
fS
d1 = α
3.
Transfer the double precision coefficients to integer values
represented by registers.
p0 = round(p0 × 8192)
Transfer the gain in decibels (dB) to decimal domain.
p1 = round(p1 × 8192)
G
k = 10 20
d1 = round(d1 × 8192)
4.
Rev. 0 | Page 63 of 296
Transfer the decimal integer values to twos complement
hexadecimal values.
ADAU1373
Worked Examples
Peak Filter
The following examples illustrate how to calculate the coefficients
for the desired peak and low-pass/high-pass shelving filter.
If Band 1 is intended to operate as a peak filter with a filter center
frequency of 240 Hz, the bandwidth is 120 Hz, peak gain is 6 dB,
and the input signal sampling frequency is 48KHz, then the
coefficients are as follows:
Low-Pass Shelving Filter
If Band 6 is intended to operate as a low-pass shelving filter and
the cutoff frequency of the filter is 80 Hz, peak gain is 6 dB, and
input signal sampling frequency is 48 kHz, the coefficients are
as follows:
k = 10
α=
(
6
)
20
α=
80
× 2π ))
= 0.989582475318754
48000
80
× 2π )
cos(
48000
(1 − sin(
= 1.995262314968880
120
× 2π )) = 0.984414127416097
48000
120
cos(
× 2π )
4800
β = cos(
p0 =
240
× 2π ) = 0.999506560365732
48000
(1 + k ) + (1 − k ) × α = 1.007756015814333
2
(1 + k ) + (1 − k ) × α = 1.005184084865251
2
p1 = −(1 + α) × β = −1.983434938834828
p1 =
( k − 1) − (1 + k ) × α = −0.984398390453503
2
p2 = (1 − k ) + (1 + k ) × α = 0.976658111601764
2
p2 = 0
d1 = (1 + α) × β = 1.983434938834828
d1 = α = 0.989582475318754
d2 = − α = −0.984414127416097
1.
Transfer the coefficients to integer numbers:
p0 = round(1.007756015814333 × 8192) = 8256
p1 = round(−1.983434938834828 × 8192) = −16248
p2 = round(0.976658111601764 × 8192) = 8000
d1 = round(1.983434938834828 × 8192) = 16248
d2 = round(−0.984414127416097 × 8192) = −8064
Transfer the coefficients to integer numbers:
2.
Represent the integer coefficients by 16-bit, twos
complement hexadecimal values:
p0 = 16-bit 0x202A
p1 = 16-bit 0xE080
p2 = 16-bit 0x0000
d1 = 16-bit 0x1FAB
d2 = 16-bit 0x0000
3.
6
)
20
p0 =
p0 = round(1.005184084865251 × 8192) = 8234
p1 = round(−0.984398390453503 × 8192) = −8064
p2 = 0
d1 = round(0.989582475318754 × 8192) = 8107
d2 = 0
2.
(
(1 − sin(
= 1.995262314968880
d2 = 0
1.
k = 10
Represent the integer coefficients by 16-bit, twos
complement hexadecimal values:
p0 = 16-bit 0x2040
p1 = 16-bit 0x1F40
p2 = 16-bit 0x1F41
d1 = 16-bit 0x3F78
d2 = 16-bit 0xE080
3.
Therefore, the registers representing EQ1 coefficients
should be set as follows:
Therefore, the registers representing EQ1 coefficients
should be set as follows:
EQ1 COEF0M = 8’0x20, EQ1 COEF0L = 8’0x40;
EQ1 COEF1M = 8’0x1F, EQ1 COEF1L = 8’0x40;
EQ1 COEF2M = 8’0x1F, EQ1 COEF2L = 8’0x41;
EQ1 COEF3M = 8’0x3F, EQ1 COEF3L = 8’0x78;
EQ1 COEF4M = 8’0xE0, EQ1 COEF4L = 8’0x80
EQ6 COEF0M = 8’0x20, EQ6 COEF0L = 8’0x2A;
EQ6 COEF1M = 8’0xE0, EQ6 COEF1L = 8’0x80;
EQ6 COEF2M = 8’0x1F, EQ6 COEF2L = 8’0xAB
Rev. 0 | Page 64 of 296
ADAU1373
High-Pass Shelving Filter
If Band 7 is intended to operate as a high-pass shelving filter
and the cutoff frequency of the filter is 6 kHz, peak gain is 6 dB,
and the input signal sampling frequency is 48 kHz, the coefficients are as follows:
k = 10
α=
(
6
)
20
= 1.995262314968880
6000
× 2π )) = 0.414213562373095
48000
6000
cos(
× 2π )
48000
(1 − sin(
p0 =
(1 + k ) − (1 − k ) × α = 1.703756731973916
2
Table 27. Bit Map of Register 0x7E and Register 0x7F
(1 − k ) − (1 + k ) × α = −1.117970294347011
p1 =
2
d1 = α = 0.414213562373095
Reg.
Addr.
0x7E
0x7F
d2 = 0
Table 28. Register 0x7E and Register 0x7F Bit Descriptions
Transfer the coefficients to integer numbers:
Reg.
Addr.
0x7E
p2 = 0
1.
p0 = round(1.703756731973916 × 8192) = 13957
p1 = round(−1.117970294347011 × 8192) = −9158
p2 = 0
d1 = round(0.414213562373095 × 8192) = 3393
d2 = 0
2.
frequency for the low-pass filter (LPF) can be set using the
BASS_LPF bit (Register 0x7E, Bit 5). The signal is passed through
the clipper, which generates the harmonics of the input signal.
The clipper threshold can be set using the BASS_CUT bits
(Register 0x7E, Bits[4:2]). The input signal that exceeds the clip
threshold is clipped. The clipped signal is then passed through
the band-pass filter, which removes the low and high frequency
content. This bass-rich signal is then mixed with the high-pass
filtered version of the input signal to form the final processed
signal. The BASS_SPK bits (Register 0x7E, Bits[1:0]) can be
used to set the low cutoff frequency of the speaker in the system
to prevent overloading of the speaker. The gain can be set using
the BASS_GAIN bits (Register 0x7F, Bits[4:2]).
6
5
BASS_LPF
Bits
[7:6]
5
Bit Name
RESERVED
BASS_LPF
[4:2]
BASS_CUT
[1:0]
BASS_SPK
[7:5]
[4:2]
RESERVED
BASS_GAIN
[1:0]
BASS_SEL
Represent the integer coefficients using 16-bit, twos
complement hexadecimal values:
p0 = 16-bit 0x3685
p1 = 16-bit 0xDC3A
p2 = 16-bit 0x0000
d1 = 16-bit 0x0D41
d2 = 16-bit 0x0000
3.
7
Therefore, the registers representing the EQ7 coefficients
should be set as follows:
EQ7 COEF0M = 8’0x36, EQ7 COEF0L = 8’0x85;
EQ7 COEF1M = 8’0xDC, EQ7 COEF1L =8’0x3A;
EQ7 COEF2M = 8’0x0D, EQ7 COEF2L = 8’0x41
0x7F
BASS ENHANCEMENT
The bass enhancement block can be used to increase the low
frequency content of the stereo signal. Register 0x7E and
Register 0x7F can be used to set the parameters of the block
(see Table 27 and Table 28).
The left and right channels sum together to perform the bass
enhancement algorithm. If only the left channel is selected, the
left channel performs the desired flow alone. The input selection
for the block is available via the BASS_SEL bits (Register 0x7F,
Bits[1:0]). The input to the block is low-pass filtered. The cutoff
Rev. 0 | Page 65 of 296
4
3
2
BASS_CUT[2:0]
BASS_GAIN[2:0]
1
0
BASS_SPK[1:0]
BASS_SEL[1:0]
Description
Reserved
Bass output frequency range
0: 801 Hz
1: 1001 Hz
Bass signal extend density (clip
level)
000: Reserved
001: 0.125
…: Step size of 0.125
111: 0.875
Cutoff frequency setting
00: 158 Hz
01: 232 Hz
10: 347 Hz
11: 520 Hz
Reserved
Bass enhancement gain
000: Reserved; not open to user
001: 0 dB
010: 6 dB
011: 9.5 dB
100: 12 dB
101: 14 dB
110: 15.5 dB
111: 17 dB
Left/right channel selection
00: both channels off
01: left channel on
10: right channel on
11: both channels on
ADAU1373
3D ENHANCEMENT
The 3D enhancement block can be used to widen the stereo
separation between the left and right signals.
Table 29 and Table 30 show the two 3D enhancement registers,
E3D_CTRL1 and E3D_CTRL2 (Address 0xC0 and Address 0xC1,
respectively). These registers provide control to enhance the
depth and level of the signal. The low-pass filter cutoff frequency
determines the frequency at which the effect begins to occur.
The 3D enhancement increases the gain of the signal, which can
be controlled by the E3D_GAIN bits (Register 0xC1, Bits[3:1]).
In addition, the depth of the 3D effect can be adjusted using the
E3D_ALPHA bits (Register 0xC0, Bits[3:0]). The depth must be
set to the desired effect based on the signal and setup.
Table 29. Bit Descriptions for Register 0xC0, E3D Enhancement Control 1 (E3D_CTRL1)
Bits
[7:4]
Bit Name
E3D_LEVEL
Settings
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
[3:0]
E3D_ALPHA
0000
0001
0010
0011
0100
0101
0110
Description
3D enhancement level control
0%, no 3D effect
6.67%
13.33%
20%
26.67%
33.33%
40%
46.67%
53.33%
60%
66.67%
73.33%
80%
86.67%
93.33%
100%
3D separate filter cutoff frequency
No 3D effect
1.5 kHz at 48 kHz sampling rate
2.2 kHz at 48 kHz sampling rate
3.6 kHz at 48 kHz sampling rate
5.5 kHz at 48 kHz sampling rate
8.1 kHz at 48 kHz sampling rate
13 kHz at 48 kHz sampling rate
Reset
0x0
Access
RW
0x0
RW
Reset
0x0
Access
RW
0x0
RW
Table 30. Bit Descriptions for E3D Enhancement Control 2, Register 0xC1 (E3D_CTRL2)
Bits
[3:1]
Bit Name
E3D_GAIN
Settings
000
001
010
011
100
101
110
111
0
E3D_EN
0
1
Description
3D enhancement gain setting
E3D gain: 1
E3D gain: 0.125
E3D gain: 0.25
E3D gain: 0.375
E3D gain: 0.5
E3D gain: 0.625
E3D gain: 0.75
E3D gain: 0.875
3D enhancement enable control
Enhancement disable
Enhancement enable
Rev. 0 | Page 66 of 296
ADAU1373
DIGITAL AUTOMATIC LEVEL CONTROL (ALC)
RMS Average Time
The automatic level control (ALC) provides continuous
adjustment of the input PGA in response to the rms amplitude
of the input signal to maintain it at a constant level, which is
defined by the ALCREF bits (Register 0xC4, Bits[3:0]). A digital
peak detector monitors the input signal amplitude and limits it
to the register-defined threshold level, using the ALCLVL bits
(Register 0xC4, Bits[7:4]).
The rms average time is the time taken for the rms value estimation. It is set by the ALCTAV bits (Register 0xC2, Bits[7:4]).
The averaging time range is 1.5 ms to 6.144 sec in 13 steps.
The ALC provides control over analog PGA and digital PGA,
which can be selected individually or together.
To reduce the gain during the silent portion of the speech or
music signal, the ALC provides a noise gate that can be operated in four different modes, as defined by the NGMODE bits
(Register 0xC8, Bits[5:4]).
•
•
•
•
Noise Gate Mode 1. Maintains the gain at the level it was
before the ALC entered into noise gate mode.
Noise Gate Mode 2. Sets the PGA gain to 0 dB.
Noise Gate Mode 3. Mutes the ALC output.
Noise Gate Mode 4. Noise gate function is disabled.
The ALC can be enabled or disabled for the left or right channel
or for both channels via the ALCEN bits (Register 0xC8, Bits[3:2]).
If the rms value of the signal falls below the ALC target threshold
(as defined by the ALCREF bits), the ALC increases the gain of
the PGA at the rate set by the ALCREC bits (Register 0xC3,
Bits[3:0]). If the signal is above the threshold, the ALC reduces
the gain of the PGA at a rate that is set by the ALCATT bits
(Register 0xC3, Bits[7:4]).
Because the dc offset introduced by the analog circuits greatly
influences ALC operation, it is recommended that the HPF
included in the ALC block be enabled when the ALC is enabled.
Peak Limiter Level
To prevent clipping during high level signals, the ALC circuit
includes a limiter function. If the ALC input signal exceeds the
peak level threshold (as defined by the ALCLVL bits), the PGA
gain is ramped down as per the attack time set by the ALCATT
bits until the signal level falls below that threshold. This function
is automatically enabled when the ALC is enabled. The peak
limiter level can be set using the ALCLVL bits. The level can be
set from −22.5 dBFs to 0 dBFS in 16 steps.
Target Level Ripple Remove
The ALCRIP bits (Register 0xC5, Bits[7:4]) define the ALC
target level ripple range. When the input signal rms level is
within this range, the ALC gain does not change. The ripple
range can be set from 0 dB to −7.5 dB in 16 steps.
For example, if the ALC target level is −6 dB, the ripple is defined as
0.5 dB, and the detected rms value of the input signal is between
−6 dB and −6.5 dB, the ALC gain does not change.
Attack (Gain Ramp-Down) Time
Attack time, which is set by the ALCATT bits, is the time that is
required for the PGA gain to ramp down through 90% of its range.
Therefore, the time for the recording level to return to its target
value (limit operation threshold) depends on both the attack
time and the gain adjustment required. If the gain adjustment is
small, the real adjustment time is less than the attack time. The
attack time range is from 1.5 ms to 6.144 sec in 13 steps. In mute
condition, this is the mute attack time.
Decay/Recovery (Gain Ramp-Up) Time
Decay time, which is set by the ALCREC bits, is the time that
is required for the PGA gain to ramp up to 90% of its range.
Therefore, the time required for the recording level to return to
its target value (recovery threshold) depends on both the decay
time and the gain adjustment required. If the gain adjustment is
small, the real adjustment time is less than the decay time. The
recovery time ranges from 6 ms to 24.576 sec in 16 steps.
Recovery Hold Time
Recovery hold time, set by the ALCHLD bits (Register 0xC2,
Bits[3:0]), is the time delay between the detection of the signal
level below the recovery threshold and the PGA gain beginning
to ramp up. The hold time applies only to gain ramp-up; there is
no delay before the gain ramping down when the signal level is
above target. The hold time range is 0 ms to 5.468 sec in 13 steps.
INPUT
SIGNAL
ALC Target level
When the signal level is below the peak limiter threshold, the
ALC attempts to maintain a constant signal level by increasing
or decreasing the gain of the PGA. That constant level is defined as
the ALC target level, which is set by the ALCREF bits. The level
can be set from −24 dBFS to −1.5 dBFS in 16 steps.
PGA
GAIN
ALC
TARGET
LEVEL
SIGNAL
AFTER
ALC
The ALCMAX bits (Register 0xC5, Bits[3:0]) set the maximum
gain value that the PGA can reach while under the control of
the ALC. The available gain range is −12 dB to +60 dB in 13 steps.
HOLD DECAY
TIME TIME
ATTACK
TIME
08975-046
ALC Maximum Gain
Figure 113. Digital PGA and ALC Decay Time, Hold Time, and Attack Time
Rev. 0 | Page 67 of 296
ADAU1373
0.05
The noise gate mode is set by the NGMODE bits (Register 0xC8,
Bits[5:4]). The ALCNGATT bits (Register 0xC7, Bits[7:4]) define
the gain reduction rate for Noise Gate Mode 2 and Noise Gate
Mode 3. In addition, when the ALC recovers from noise gate
mode, the ALCNGREC bits (Register 0xC7, Bits[3:0]) set the
PGA to increase to 0 dB at this rate at first; then the ALC enters
the attack or recovery phase.
Before the ALC enters into recovery mode, the ALC gain can be
held constant for some time. This hold time can be disabled or
enabled by the HLDRST bit (Register 0xC8, Bit 7). For Noise
Gate Mode 1, it is recommended that this bit be set to 1; for
Noise Gate Mode 2 and Noise Gate Mode 3, this bit should be
set to 0.
Noise Gate Attack Time
The noise gate attack time, which is set by the ALCNGATT bits,
is the time constant used when the ALC begins its noise gate phase.
This time constant is valid only in Noise Gate Mode 2 and Noise
Gate Mode 3. The attack time ranges from 6 ms to 24.576 sec
in 13 steps.
0
0.5
50
100
150
TIME (ms)
200
250
300
100
150
TIME (ms)
200
250
300
ALC OUTPUT
0
–0.5
ALC GAIN (dB)
0
60
50
ALC GAIN
40
20
0
GAIN HOLD DURING NOISE GATE
0
2000
4000
6000
8000
10000
12000
14000
TIME (ms)
Figure 114. Noise Gate Mode 1
0.05
ALC INPUT
0
–0.05
0
0.05
20
40
60
80
TIME (ms)
100
120
140
40
60
80
TIME (ms)
100
120
140
ALC OUTPUT
0
–0.05
0
40
20
ALC GAIN
NOISE GATE
HOLD TIME
20
GAIN ATTACKS
TO 0dB
RECOVERY
0
0
20
40
60
80
TIME (ms)
100
120
140
Figure 115. Noise Gate Mode 2
Noise Gate Recovery Time
0.05
The noise gate recovery time, which is set by the ALCNGREC
bits (Register 0xC7, Bits[3:0]), is the time constant used when
the ALC escapes from the noise gate. It is valid only in Noise
Gate Mode 3. The recovery time ranges from 1.5 ms to 6.144 sec
in 13 steps.
ALC INPUT
0
–0.05
0
20
40
60
80
TIME (ms)
100
120
140
40
60
80
TIME (ms)
100
120
140
0.5
ALC OUTPUT
Noise Gate Hold Time
0
Noise Gate Threshold
–0.5
ALC GAIN (dB)
Noise gate hold time, which is set by the ALCNGHLD bits
(Register 0xC6, Bits[3:0]), is the time between the detection of
the signal level below the noise gate threshold and ALC entering
into noise gate mode. The hold time range is 0 ms to 5.460 sec
in 13 steps.
0
50
20
ALC GAIN
MUTE THE SIGNAL
TO –120dB
0
–50
The noise gate threshold, which is set by the ALCNGTH bits
(Register 0xC6, Bits[7:4]), defines the noise level below which
the signal is considered as noise. The noise gate threshold ranges
from −81 dBFS to −36 dBFS in 16 steps.
Rev. 0 | Page 68 of 296
0
20
40
RECOVERY
ESCAPE FROM
NOISE GATE RAMP
UP THE GAIN TO 0dB
NOISE GATE HOLD
60
80
TIME (ms)
100
Figure 116. Noise Gate Mode 3
120
140
08975-049
•
•
Noise Gate Mode 1. Keeps the PGA gain as a constant
when the ALC enters into noise gate.
Noise Gate Mode 2. Sets the PGA gain to 0.
Noise Gate Mode 3. Mutes the ALC output to −120 dB.
–0.05
ALC GAIN (dB)
•
ALC INPUT
0
08975-047
When the signal is very quiet and consists mainly of noise, the
ALC function may cause a phenomenon called noise pumping.
The ALC, when disabled, treats the noise as a normal signal
without any processing; when the ALC is enabled, the noise gate
function is enabled. The noise gate prevents noise pumping by
comparing the signal level at the input against a noise gate
threshold. When the ALC noise gate function is enabled, there
are three optional modes, as follows:
08975-048
Noise Gate Mode
ADAU1373
INTERRUPT REQUEST (IRQ)
The following analog faults can set the AFAULT_RAW_STATE bit:
The ADAU1373 can generate an interrupt request based on
selected events from the various internal blocks. The interrupt
controller receives inputs from the MICBIAS current detect,
ASRC unlock detect, DRC signal activity detect, PLL unlock
detect, jack detect, and analog fault detect. Three registers are
provided for this function: Register 0xE5 can be used to set the
mask for the interrupts, Register 0xE6 stores the raw status
of the interrupts, and Register 0xE7 stores the status of the
interrupts after mask. The generation of interrupts can be
enabled or disabled using Register 0xE8, Bit 0.
•
•
•
•
The interrupts can be masked using the respective bits in
Register 0xE5. A bit setting of 1 unmasks the faults and generates
the interrupt request. The faults are reported in Register 0xE7.
When faults are unmasked, the status bits in Register 0xE7 are
latched until 1 is written to them. The raw status of the faults
can be read in Register 0xE6.
Earpiece amplifier overcurrent
Speaker amplifier left channel overcurrent
Speaker amplifier right channel overcurrent
Headphone amplifier overcurrent or overtemperature
The overcurrent thresholds are fixed internally. The overtemperature fault is set when the die temperature exceeds 150°C ±
15°C.
The IRQs can be reported via GPIOx, or the IRQ_STATE register
(Register 0xE7) can be read via the I2C to determine which block
is reporting a fault. The analog fault status in Register 0xE7 can be
used in conjunction with Register 0x39 or Register 0x38 to
differentiate among the analog faults.
Register 0x39 reports faults for an earpiece overcurrent, speaker
amplifier overcurrent, headphone amplifier overcurrent, and
die overtemperature.
In addition, any of the above interrupts can be used to initiate the
IRQ (interrupt request) on the GPIOx pins. The four GPIO pins
can be set for IRQ function using Register 0xE3 and Register 0xE4.
In addition, Register 0x38 reports Microphone Bias 1 and Microphone Bias 2 current detect, as well as overcurrent and logic
voltage changes at the JACKDET pin (Ball G5).
The following events are reported in the interrupt status register
(Register 0xE6, IRQ_RAW):
The MICB1THS and MICB2THS bits (Register 0x38, Bit 0 and
Bit 2, respectively) can be used to detect the connection of the
electret microphone at the MICBIASx pins (Ball C8 and Ball C9).
When the electrets microphone is connected, the current flow from
the MICBIASx pins to the microphone is detected. The current
detection threshold can be set using Register 0x22. Four settings
are provided: 150 μA (default), 330 μA, 510 μA, and 700 μA.
Similarly, the overcurrent at the MICBIASx outputs can be
detected. This allows for limiting the current drawn out of the
internal microphone bias regulator in case of a short circuit at
the MICBIASx pin. The overcurrent limit can be set to 330 μA,
700 μA, 1000 μA, or 1400 μA. The JACKDECT bit (Register 0x38,
Bit 4) can be used to detect the insertion/ removal of the accessory
at the headphone socket. When jack insertion is detected, the
status bit is set to 1.
•
•
•
•
•
•
Unlocking of any of the three ASRCs. When either of the
three ASRC loses lock, the respective ASRCx_IRQ_RAW_
STATE bit is set.
The DRC input level exceeding the threshold set in
Register 0x8E, Register 0x9E, and Register 0xAE, which
sets the DRC_IRQ_RAW_STATE.
The on-chip PLL losing lock, which sets the PLL_UNLOCK_
RAW_STATE bit.
Any write to Register 0x36, Bits[1:0], which sets the
HP_CFG_RAW_STATE bit.
A change in the logic level at the JACKDET pin, which sets
the HP_DECT_RAW_STATE bit.
Occurrence of an analog fault, which sets the AFAULT_
RAW_STATE bit.
The ADC/DAC clock loss is reported in Register 0x37.
Rev. 0 | Page 69 of 296
ADAU1373
CONTROL PORTS
The ADAU1373 has a 2-wire I2C bus control port, which can
be used to set the registers. The control port is capable of full
read/write operation for all addressable registers. Operations
such as mute and input/output mode control are programmed
by writing to these registers.
All addresses can be accessed in either single-address mode or
burst mode. The first byte (Byte 1) of a control port write contains
the 7-bit chip address plus the R/W bit. The next byte (Byte 2)
forms the subaddress of the register location within the
ADAU1373. This subaddress must be a single byte long. All
subsequent bytes (starting with Byte 3) contain the data to be
written to the register. The number of bytes per word depends
on the type of data that is being written.
The ADAU1373 provides several mechanisms for updating
signal processing parameters in real time without causing
pops or clicks.
The function of each of the two control port pins (SCL and SDA)
is described in Table 31.
Table 31. Control Port Pin Functions
Pin Name
SCL
SDA
I2C PORT
The ADAU1373 supports a 2-wire serial (I2C-compatible)
microprocessor bus that drives multiple peripherals. Two pins,
serial data (SDA) and serial clock (SCL), carry information
between the ADAU1373 and the system I2C master controller.
In I2C mode, the ADAU1373 is always a slave on the bus,
meaning that it cannot initiate a data transfer. Each slave device
is recognized by a unique address. The address and R/W byte
format is shown in Table 32. The address resides in the first
seven bits of the I2C write. The I2C address for the ADAU1373
is 0x1A. The LSB of the address (the R/W bit) specifies either
a read or write operation. A Logic 1 corresponds to a read
operation, and a Logic 0 corresponds to a write operation.
Burst mode addressing, where the subaddresses are automatically incremented at word boundaries, can be used for writing
large amounts of data to contiguous registers. This increment
happens automatically after a single word write unless a stop
condition is encountered. A data transfer is always terminated
by a stop condition.
The SDA and SCL pins should each have a 2 kΩ pull-up resistor
to IOVDD5 (1.8 V to 3.3 V).
I2C Mode
Input clock
Open-collector input/output
Table 32. I2C Address and Read/Write Byte Format
Bit 0
0
Bit 1
0
Bit 2
1
Bit 3
1
Bit 4
0
Rev. 0 | Page 70 of 296
Bit 5
1
Bit 6
0
Bit 7
R/W
ADAU1373
Addressing
Stop and start conditions can be detected at any stage during the
data transfer. If these conditions are asserted out of sequence with
normal read and write operations, the ADAU1373 immediately
jumps to the idle condition. During a given SCL high period,
the user should issue only one start condition, one stop condition,
or a single stop condition followed by a single start condition. If
an invalid subaddress is issued by the user, the ADAU1373 does
not issue an acknowledge and returns to the idle condition.
2
Initially, each device on the I C bus is in an idle state and monitors
the SDA and SCL lines for a start condition and the correct address.
The I2C master initiates a data transfer by establishing a start
condition, defined by a high-to-low transition on SDA while SCL
remains high. This indicates that an address/data stream follows.
All devices on the bus respond to the start condition and shift
the next eight bits (the 7-bit address plus the R/W bit), MSB first.
The device that recognizes the transmitted address responds by
pulling the data line low during the ninth clock pulse. This ninth
bit is known as an acknowledge bit. All other devices withdraw
from the bus at this point and return to the idle condition.
If the user exceeds the highest subaddress while in autoincrement
mode, one of two actions is taken. In read mode, the ADAU1373
outputs the highest subaddress register contents until the master
device issues a no acknowledge, indicating the end of a read. In
a no acknowledge condition, the SDA line is not pulled low on
the ninth clock pulse on SCL. If the highest subaddress location
is reached while in write mode, the data for the invalid byte is
not loaded into any subaddress register, a no acknowledge is
issued by the ADAU1373, and the part returns to the idle
condition.
The R/W bit determines the direction of the data. A Logic 0 on
the LSB of the first byte means that the master writes information
to the peripheral, whereas a Logic 1 means that the master reads
information from the peripheral after writing the subaddress and
repeating the start address. A data transfer takes place until a stop
condition is encountered. A stop condition occurs when SDA
transitions from low to high while SCL is held high. Figure 117
shows the timing of an I2C single-byte write, and Figure 118
shows the timing of an I2C single-byte read.
SCL
SDA
START BY
MASTER
0
0
1
1
0
0
1
R/W
ACK BY
ADAU1373
FRAME 2
REGISTER ADDRESS BYTE
FRAME 1
DEVICE ADDRESS BYTE
ACK BY
ADAU1373
SCL
(CONTINUED)
SDA
(CONTINUED)
STOP BY
MASTER
08975-020
ACK BY
ADAU1373
FRAME 3
DATA BYTE
Figure 117. I2C Single Byte Write
SCL
SDA
START BY
MASTER
DEVICE ADDRESS
R/W
ACK BY
ADAU1373
FRAME 1
DEVICE ADDRESS BYTE
FRAME 2
REGISTER ADDRESS BYTE
ACK BY
ADAU1373
SCL
(CONTINUED)
DEVICE ADDRESS
R/W
REPEATED
START BY MASTER
ACK BY
ADAU1373
ACK BY
MASTER
FRAME 4
READ DATA BYTE
FRAME 3
DEVICE ADDRESS BYTE
Figure 118. I2C Single Byte Read
Rev. 0 | Page 71 of 296
STOP BY
MASTER
08975-021
SDA
(CONTINUED)
ADAU1373
Figure 122 shows the format of a burst mode read sequence.
This figure shows an example of a read from sequential singlebyte registers. The ADAU1373 increments its subaddress register
after every byte because the requested subaddress corresponds
to a register or memory area with a 1-byte word length. The
ADAU1373 always decodes the subaddress and sets the autoincrement circuit so that the address increments after the
appropriate number of bytes.
I2C Read and Write Operations
Figure 119 shows the format of a single-word write operation.
Every ninth clock pulse, the ADAU1373 issues an acknowledge
by pulling SDA low.
Figure 120 shows the format of a burst mode write sequence. This
figure shows an example of a write to sequential single-byte
registers. The ADAU1373 increments its subaddress register
after every byte because the requested subaddress corresponds
to a register or memory area with a 1-byte word length.
Figure 119 to Figure 122 use the abbreviations shown in Table 33.
Table 33. Abbreviations for Read/Write Operations Format
S
DEVICE ADDRESS,
R/W = 0
AS
Abbreviation
S
P
AM
AS
AS
REGISTER ADDRESS
Description
Start bit
Stop bit
Acknowledgment by master
Acknowledgment by slave
DATA BYTE
08975-022
Figure 121 shows the format of a single-word read operation.
Note that the first R/W bit is set to 0, indicating a write
operation. This is because the subaddress still needs to be
written to set up the internal address. After the ADAU1373
acknowledges the receipt of the subaddress, the master must issue
a repeated start command, followed by the chip address byte with
the R/W bit set to 1 (read). This causes the ADAU1373 SDA to
reverse and begin driving data back to the master. The master
then responds every ninth pulse with an acknowledge pulse to
the ADAU1373.
P
S
DEVICE ADDRESS,
R/W = 0
AS
REGISTER ADDRESS
AS
DATA BYTE 1
AS
DATA BYTE 2
AS
DATA BYTE 3
08975-023
Figure 119. Single-Word I2C Write Format
S
DEVICE ADDRESS,
R/W = 0
AS
REGISTER ADDRESS
AS
S
DEVICE ADDRESS
AS
DATA BYTE
AM
08975-024
Figure 120. Burst Mode I2C Write Format
S
DEVICE ADDRESS,
R/W = 0
AS
REGISTER ADDRESS
AS
S
DEVICE ADDRESS
AS
Figure 122. Burst Mode I2C Read Format
Rev. 0 | Page 72 of 296
DATA BYTE 1
AM
DATA BYTE 2
AM
...
P
08975-025
Figure 121. Single-Word I2C Read Format
ADAU1373
REGISTER MAP SUMMARY (DEFAULT)
seven-band EQ block. Refer to the EQ register map (see Table 245)
for using the EQ function. Register addresses are in hexadecimal
format.
Table 34 is the summary of the control registers for the ADAU1373
in default mode using an MDRC, which can be accessed using
an I2C port. Register 0x80 to Register 0xBD are shared with the
Table 34. Register Summary
Reg Name
Bits
00
INPUT_MODE
[7:0] GAINMODE3
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
GAINMODE2
GAINMODE1
GAINMODE0
INMODE3
INMODE2
INMODE1
INMODE0
Reset RW
0x00
RW
01
AIN1L_CTRL
[7:0]
RESERVED
AIN1LVOL
0x00
SRST
02
AIN1R_CTRL
[7:0]
RESERVED
AIN1RVOL
0x00
SRST
03
AIN2L_CTRL
[7:0]
RESERVED
AIN2LVOL
0x00
SRST
04
AIN2R_CTRL
[7:0]
RESERVED
AIN2RVOL
0x00
SRST
05
AIN3L_CTRL
[7:0]
RESERVED
AIN3LVOL
0x00
SRST
06
AIN3R_CTRL
[7:0]
RESERVED
AIN3RVOL
0x00
SRST
07
AIN4L_CTRL
[7:0]
RESERVED
AIN4LVOL
0x00
SRST
08
AIN4R_CTRL
[7:0]
RESERVED
AIN4RVOL
0x00
SRST
09
LLINE1_OUT
[7:0]
RESERVED
LLINE1
0x00
SRST
0A RLINE1_OUT
[7:0]
RESERVED
RLINE1
0x00
SRST
0B
LLINE2_OUT
[7:0]
RESERVED
LLINE2
0x00
SRST
0C
RLINE2_OUT
SRST
[7:0]
RESERVED
RLINE2
0x00
0D LCD_OUT
[7:0]
RESERVED
LCD
0x00
SRST
0E
RCD_OUT
[7:0]
RESERVED
RCD
0x00
SRST
0F
LHP_OUT
[7:0]
RESERVED
LHP
0x00
SRST
10
RHP_OUT
[7:0]
RESERVED
RHP
0x00
SRST
11
ADC_GAIN
[7:0] ADCRGAIN3
12
LADC_MIXER
[7:0]
RESERVED
ADCLMIX4
13
RADC_MIXER
[7:0]
RESERVED
ADCRMIX4
14
LLINE1MIX
[7:0] LLINE1MIX7
LLINE1MIX4
LLINE1MIX3
ADCRGAIN2
LLINE1MIX6
ADCRGAIN1
LLINE1MIX5
ADCRGAIN0
ADCLGAIN3
ADCLGAIN2
ADCLGAIN1
ADCLGAIN0
0x00
RW
ADCLMIX3
ADCLMIX2
ADCLMIX1
ADCLMIX0
0x00
RW1C
ADCRMIX3
ADCRMIX2
ADCRMIX1
ADCRMIX0
0x00
RW1C
LLINE1MIX2
LLINE1MIX1
LLINE1MIX0
0x00
RW1C
15
RLINE1MIX
[7:0] RLINE1MIX7
RLINE1MIX6
RLINE1MIX5
RLINE1MIX4
RLINE1MIX3
RLINE1MIX2
RLINE1MIX1
RLINE1MIX0
0x00
RW1C
16
LLINE2MIX
[7:0] LLINE2MIX7
LLINE2MIX6
LLINE2MIX5
LLINE2MIX4
LLINE2MIX3
LLINE2MIX2
LLINE2MIX1
LLINE2MIX0
0x00
RW1C
17
RLINE2MIX
[7:0] RLINE2MIX7
RLINE2MIX6
RLINE2MIX5
RLINE2MIX4
RLINE2MIX3
RLINE2MIX2
RLINE2MIX1
RLINE2MIX0
0x00
RW1C
18
LCDMIX
[7:0] CDLMIX7
CDLMIX6
CDLMIX5
CDLMIX4
CDLMIX3
CDLMIX2
CDLMIX1
CDLMIX0
0x00
RW1C
19
RCDMIX
[7:0] CDRMIX7
CDRMIX6
CDRMIX5
CDRMIX4
CDRMIX3
CDRMIX2
CDRMIX1
CDRMIX0
0x00
RW1C
1A LHPMIX
[7:0] LHPMIX7
LHPMIX6
LHPMIX5
LHPMIX4
LHPMIX3
LHPMIX2
LHPMIX1
LHPMIX0
0x00
RW1C
1B
RHPMIX
[7:0] RHPMIX7
RHPMIX6
RHPMIX5
RHPMIX4
RHPMIX3
RHPMIX2
RHPMIX1
RHPMIX0
0x00
RW1C
1C
EPMIX
[7:0] EPMIX7
EPMIX6
EPMIX5
EPMIX4
EPMIX3
EPMIX2
EPMIX1
EPMIX0
0x00
RW1C
0x00
RW
1D HP_CTRL
[7:0]
1E
HP_CTRL2
[7:0] RESERVED
1F
LS_CTRL
[7:0] CDDRIVE
21
EPCONTROL
[7:0]
22
MICBIAS_CTRL1
[7:0] VBATLOW
23
MICBIAS_CTRL2
[7:0] RESERVED
24
OUTPUT_
CONTROL
[7:0]
RESERVED
POPTIME
LVL_THR
DIRCD
HPMOD
HIZ
CDSM
RESERVED
RCDBST
MICB2GAIN
MICB1LIM
MICB1OCEN
MICB2LIM
MICB2OCEN
RNSM
MICB1CURDEN
MICB2CURDEN
LNSM
HPOC
VOLIM
RESERVED
LCDBST
EDGE
0x00
RW
0x00
RW
MICB1GAIN
EPGAIN
0x00
RW
MICB1SHT
MICB1CURD
0x00
RW
MICB2CURD
0x00
RW
VMID
0x00
RW
MICB2SHT
LDIFF
LNFBEN
ZCTO
25
PWDN_CTRL1
[7:0] LADCPDB
RADCPDB
MICB2PDB
MICB1PDB
AIN4PDB
AIN3PDB
AIN2PDB
AIN1PDB
0x00
RW
26
PWDN_CTRL2
[7:0] LDAC2PDB
RADC2PDB
LDAC1PDB
RDAC1PDB
LLN2PDB
RLN2PDB
LLN1PDB
RLN1PDB
0x00
RW
27
PWDN_CTRL3
[7:0] ZDPDB
VBATPWDB
RESERVED
EPPDB
LCDPDB
RCDPDB
HPPDB
PWDB
28
DPLLA_CTRL
[7:0]
29
DPLLA_REF_SEL
DPLLA_NDIV
0x00
RW
0x00
RW
PLLA_CTRL1
[7:0]
PLLA_M_HI
0x00
RW
2A PLLA_CTRL2
[7:0]
PLLA_M_LO
0x00
RW
2B
PLLA_CTRL3
[7:0]
PLLA_N_HI
0x00
RW
2C
PLLA_CTRL4
[7:0]
PLLA_N_LO
0x00
RW
PLLA_TYPE
0x00
RW
PLLA_EN
0x02
RW
0x00
RW
2D PLLA_CTRL5
[7:0] RESERVED
PLLA_R
PLLA_X
2E
PLLA_CTRL6
[7:0]
RESERVED
2F
DPLLB_CTRL
[7:0]
DPLLB_REF_SEL
DPLLA_LOCKED
PLLA_LOCKED
30
PLLB_CTRL1
[7:0]
PLLB_M_HI
0x00
RW
31
PLLB_CTRL2
[7:0]
PLLB_M_LO
0x00
RW
32
PLLB_CTRL3
[7:0]
PLLB_N_HI
0x00
RW
33
PLLB_CTRL4
[7:0]
PLLB_N_LO
0x00
RW
34
PLLB_CTRL5
[7:0] RESERVED
PLLB_TYPE
0x00
RW
35
PLLB_CTRL6
[7:0]
PLLB_EN
0x02
RW
36
HEADDECT
[7:0]
37
ADC_DAC_
STATUS
[7:0] RESERVED
PLLB_R
RESERVED
PLLB_X
DPLLB_LOCKED
PLLB_LOCKED
RESERVED
NOCLKDAC2
DPLLA_BYPASS
DPLLB_NDIV
NOCLKDAC1
HEADSET
RESERVED
Rev. 0 | Page 73 of 296
DPLLB_BYPASS
NOCLKADC
0x00
RW
0x00
R
ADAU1373
Reg Name
Bits
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
Reset RW
38
MIC_JACK_
STATUS
[7:0]
Bit 7
RESERVED
JACKDECT
MICB2OC
MICB2THS
MICB1OC
MICB1THS
0x00
R
39
CHIP_FAULT_
STATUS
[7:0]
RESERVED
OCEP
OCCDR
OCCDL
OCHP
OT
0x00
R
3C
ADC_SETTING
[7:0]
ADC_RESET_
FORCE
ADC_RESET
PDETECT
0x00
RW
40
CLK1_
SOURCE_DIV
[7:0] COREN
0x00
MMRW
41
CLK1_
OUTPUT_DIV
[7:0]
0x00
RW
42
CLK2_
SOURCE_DIV
[7:0] CLK2EN
0x00
MMRW
43
CLK2_
OUTPUT_DIV
[7:0]
0x00
RW
44
DAIA
[7:0] BCLKINVA
MSA
SWAPA
LRPA
WLA
FORMATA
45
DAIB
[7:0] BCLKINVB
MSB
SWAPB
LRPB
WLB
FORMATB
0x0A RW
46
DAIC
[7:0] BCLKINVC
MSC
SWAPC
LRPC
WLC
FORMATC
0x0A RW
47
BCLKDIVA
[7:0]
RESERVED
DAIA_
SOURCE
DAIA_SR
BPFA
0x00
RW
48
BCLKDIVB
[7:0]
RESERVED
DAIB_
SOURCE
DAIB_SR
BPFB
0x00
RW
49
BCLKDIVC
[7:0]
RESERVED
DAIC_
SOURCE
DAIC_SR
BPFC
0x00
RW
4A SRCA_RATIOA
[7:0] SRCAMODE
4B
SRCA_RATIOB
[7:0]
4C
SRCB_RATIOA
[7:0] SRCBMODE
Bit 6
Bit 5
RESERVED
CLK1S_SEL
CLK1SDIV
RESERVED
MCLK1DIV
CLK1OEN
CLK2S_SEL
CLK1ODIV
CLK2SDIV
RESERVED
MCLK2DIV
CLK2OEN
CLK2ODIV
SRCAINT
SRCARFRE_HI
SRCARFRE_LOW
SRCBINT
SRCBRFRE_HI
4D SRCB_RATIOB
[7:0]
SRCBRFRE_LOW
4E
SRCC_RATIOA
[7:0] SRCCMODE
4F
SRCC_RATIOB
[7:0]
50
DEEMP_CTRL
[7:0]
51
SRC_DAI_A_
CTRL
[7:0]
RESERVED
SRCA_
RECWRONG
SRCA_
PBWRONG
52
SRC_DAI_B_
CTRL
[7:0]
RESERVED
SRCB_
RECWRONG
53
SRC_DAI_C_
CTRL
[7:0]
RESERVED
56
DIN_MIX_
CTRL0
[7:0] RESERVED
57
DIN_MIX_
CTRL1
58
59
SRCCINT
SRCCRFRE_HI
SRCCRFRE_LOW
0x0A RW
0x00
RW
0x00
RW
0x00
RW
0x00
RW
0x00
RW
0x00
RW
DEMPCEN
DEMPBEN
DEMPAEN
0x00
RW
SRCAUNLOCK
SRCAPBEN
SRCARECEN
DAIAEN
0x08
RW
SRCB_
PBWRONG
SRCBUNLOCK
SRCBPBEN
SRCBRECEN
DAIBEN
0x08
RW
SRCC_
RECWRONG
SRCC_
PBWRONG
SRCCUNLOCK
SRCCPBEN
SRCCRECEN
DAICEN
0x08
RW
DIN_CHAN0_
DMIC_SWAP
DIN_CHAN0_
DMIC
DIN_CHAN0_
ADC_SWAP
DIN_CHAN0_ADC DIN_CHAN0_
AIFC_PB
DIN_CHAN0_
AIFB_PB
DIN_CHAN0_
AIFA_PB
0x00
RW
[7:0] RESERVED
DIN_CHAN1_
DMIC_SWAP
DIN_CHAN1_
DMIC
DIN_CHAN1_
ADC_SWAP
DIN_CHAN1_ADC DIN_CHAN1_
AIFC_PB
DIN_CHAN1_
AIFB_PB
DIN_CHAN1_
AIFA_PB
0x00
RW
DIN_MIX_
CTRL2
[7:0] RESERVED
DIN_CHAN2_
DMIC_SWAP
DIN_CHAN2_
DMIC
DIN_CHAN2_
ADC_SWAP
DIN_CHAN2_ADC DIN_CHAN2_
AIFC_PB
DIN_CHAN2_
AIFB_PB
DIN_CHAN2_
AIFA_PB
0x00
RW
DIN_MIX_
CTRL3
[7:0] RESERVED
DIN_CHAN3_
DMIC_SWAP
DIN_CHAN3_
DMIC
DIN_CHAN3_
ADC_SWAP
DIN_CHAN3_ADC DIN_CHAN3_
AIFC_PB
DIN_CHAN3_
AIFB_PB
DIN_CHAN3_
AIFA_PB
0x00
RW
5A DIN_MIX_
CTRL4
[7:0] RESERVED
DIN_CHAN4_
DMIC_SWAP
DIN_CHAN4_
DMIC
DIN_CHAN4_
ADC_SWAP
DIN_CHAN4_ADC DIN_CHAN4_
AIFC_PB
DIN_CHAN4_
AIFB_PB
DIN_CHAN4_
AIFA_PB
0x00
RW
5B
DOUT_MIX_
CTRL0
[7:0]
RESERVED
DOUT_CHAN4_
AIFA_REC
DOUT_CHAN3_
AIFA_REC
DOUT_CHAN2_
AIFA_REC
DOUT_CHAN1_
AIFA_REC
DOUT_CHAN0_
AIFA_REC
0x00
RW
5C
DOUT_MIX_
CTRL1
[7:0]
RESERVED
DOUT_CHAN4_
AIFB_REC
DOUT_CHAN3_
AIFB_REC
DOUT_CHAN2_
AIFB_REC
DOUT_CHAN1_
AIFB_REC
DOUT_CHAN0_
AIFB_REC
0x00
RW
5D DOUT_MIX_
CTRL2
[7:0]
RESERVED
DOUT_CHAN4_
AIFC_REC
DOUT_CHAN3_
AIFC_REC
DOUT_CHAN2_
AIFC_REC
DOUT_CHAN1_
AIFC_REC
DOUT_CHAN0_
AIFC_REC
0x00
RW
5E
DOUT_MIX_
CTRL3
[7:0]
RESERVED
DOUT_CHAN4_
DAC1
DOUT_CHAN3_
DAC1
DOUT_CHAN2_
DAC1
DOUT_CHAN1_
DAC1
DOUT_CHAN0_
DAC1
0x00
RW
5F
DOUT_MIX_
CTRL4
[7:0]
RESERVED
DOUT_CHAN4_
DAC2
DOUT_CHAN3_
DAC2
DOUT_CHAN2_
DAC2
DOUT_CHAN1_
DAC2
DOUT_CHAN0_
DAC2
0x00
RW
DAIBRECVOLM
DAIARECVOLM
DAICPBVOLM
DAIBPBVOLM
DAIAPBVOLM
0x00
RW
RESERVED
RESERVED
DEMPFS
60
VOLMOD1
[7:0]
61
VOLMOD2
[7:0]
DAICRECVOLM
62
DAIA_PBL_
VOL
[7:0]
DAIAPBLVOL
0x00
RW
63
DAIA_PBR_
VOL
[7:0]
DAIAPBRVOL
0x00
RW
64
DAIB_PBL_
VOL
[7:0]
DAIBPBLVOL
0x00
RW
65
DAIB_PBR_
VOL
[7:0]
DAIBPBRVOL
0x00
RW
66
DAIC_PBL_
VOL
[7:0]
DAICPBLVOL
0x00
RW
67
DAIC_PBR_
VOL
[7:0]
DAICPBRVOL
0x00
RW
68
DAIA_RECL_
VOL
[7:0]
DAIARECLVOL
0x00
RW
69
DAIA_RECR_
VOL
[7:0]
DAIARECRVOL
0x00
RW
RESERVED
CODECDRECVOLM CODECRECVOLM CODECPBBVOLM CODECPBAVOLM 0x00
Rev. 0 | Page 74 of 296
RW
ADAU1373
Reg Name
Bits
6A DAIB_RECL_
VOL
[7:0]
DAIBRECLVOL
0x00
RW
6B
DAIB_RECR_
VOL
[7:0]
DAIBRECRVOL
0x00
RW
6C
DAIC_RECL_
VOL
[7:0]
DAICRECLVOL
0x00
RW
6D DAIC_RECR_
VOL
[7:0]
DAICRECRVOL
0x00
RW
6E
PBAL_VOL
[7:0]
PBALVOL
0x00
RW
6F
PBAR_VOL
[7:0]
PBARVOL
0x00
RW
70
PBBL_VOL
[7:0]
PBBLVOL
0x00
RW
71
PBBR_VOL
[7:0]
PBBRVOL
0x00
RW
72
RECL_VOL
[7:0]
RECLVOL
0x00
RW
73
RECR_VOL
[7:0]
RECRVOL
0x00
RW
74
DRECL_VOL
[7:0]
DRECLVOL
0x00
RW
75
DRECR_VOL
[7:0]
0x00
RW
76
VOL_GAIN1
[7:0]
RESERVED
DAICPBRVOL_
GAIN
DAICPBLVOL_
GAIN
DAIBPBRVOL_
GAIN
DAIBPBLVOL_
GAIN
DAIAPBRVOL_
GAIN
DAIAPBLVOL_
GAIN
0x00
RW
77
VOL_GAIN2
[7:0]
RESERVED
DAICRECRVOL_
GAIN
DAICRECLVOL_
GAIN
DAIBRECRVOL_
GAIN
DAIBRECLVOL_
GAIN
DAIARECRVOL_
GAIN
DAIARECLVOL_
GAIN
0x00
RW
78
VOL_GAIN3
[7:0] DRECRVOL_GAIN DRECLVOL_GAIN RECRVOL_GAIN
RECLVOL_GAIN
PBBRVOL_GAIN
PBBLVOL_GAIN
PBARVOL_GAIN
PBALVOL_GAIN
0x00
RW
7D HPF_CTRL
[7:0]
7E
[7:0]
BASS1
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
DRECRVOL
HPFF
RESERVED
HPFOR
BASS_LPF
BASS_CUT
RESERVED
BASS_GAIN
Reset RW
HPFEN
0x00
RW
BASS_SPK
0x00
RW
BASS_SEL
0x00
RW
7F
BASS2
[7:0]
80
DRC1_CTRL1
[7:0]
DRCNGREC
DRCLELTAV
0x78
RW
81
DRC1_CTRL2
[7:0]
DRCLELATT
DRCLELDEC
0x18
RW
82
DRC1_CTRL3
[7:0]
DRCTHX1
0x00
RW
83
DRC1_CTRL4
[7:0]
DRCTHX2
0x00
RW
84
DRC1_CTRL5
[7:0]
DRCTHX3
0x00
RW
85
DRC1_CTRL6
[7:0]
DRCTHX4
0xC0 RW
86
DRC1_CTRL7
[7:0]
DRCTHY1
0x00
RW
87
DRC1_CTRL8
[7:0]
DRCTHY2
0x00
RW
88
DRC1_CTRL9
[7:0]
DRCTHY3
0x00
RW
89
DRC1_CTRL10
[7:0]
DRCTHY4
0xC0 RW
8A DRC1_CTRL11
[7:0]
DRCGSATT
DRCGSDEC
0x88
8B
DRC1_CTRL12
[7:0]
DRCHTNOR
DRCHTNG
0x7A RW
8C
DRC1_CTRL13
[7:0]
RESERVED
DRCNGHDEN
DRCG
DRCNGSRC
DRCCESRC
DRCLMSRC
RESERVED
DRCNGEN
RW
0xDF RW
8D DRC1_CTRL14
[7:0] DRCNGTGT
8E
DRC1_CTRL15
[7:0] RESERVED
8F
DRC1_CTRL16
[7:0]
90
DRC2_CTRL1
[7:0]
DRCNGREC
DRCLELTAV
0x78
RW
91
DRC2_CTRL2
[7:0]
DRCLELATT
DRCLELDEC
0x18
RW
92
DRC2_CTRL3
[7:0]
DRCTHX1
0x00
RW
93
DRC2_CTRL4
[7:0]
DRCTHX2
0x00
RW
94
DRC2_CTRL5
[7:0]
DRCTHX3
0x00
RW
95
DRC2_CTRL6
[7:0]
DRCTHX4
0xC0 RW
96
DRC2_CTRL7
[7:0]
DRCTHY1
0x00
RW
97
DRC2_CTRL8
[7:0]
DRCTHY2
0x00
RW
98
DRC2_CTRL9
[7:0]
DRCTHY3
0x00
RW
99
DRC2_CTRL10
[7:0]
DRCTHY4
0xC0 RW
SIG_DET_RMS
RESERVED
ALG_NGEN
DRCEN
0x20
SIG_DET_PK
0x00
RW
0x00
RW
DRCIRQ_MODE
DRCIRQ_EN
RW
9A DRC2_CTRL11
[7:0]
DRCGSATT
DRCGSDEC
0x88
9B
DRC2_CTRL12
[7:0]
DRCHTNOR
DRCHTNG
0x7A RW
9C
DRC2_CTRL13
[7:0]
9D DRC2_CTRL14
[7:0] DRCNGTGT
9E
DRC2_CTRL15
[7:0] RESERVED
9F
DRC2_CTRL16
[7:0]
RESERVED
DRCNGHDEN
DRCG
DRCNGSRC
DRCCESRC
DRCLMSRC
RESERVED
DRCNGEN
SIG_DET_RMS
RESERVED
ALG_NGEN
RW
0xDF RW
DRCEN
0x20
SIG_DET_PK
0x00
RW
0x00
RW
DRCIRQ_MODE
DRCIRQ_EN
RW
A0 DRC3_CTRL1
[7:0]
DRCNGREC
DRCLELTAV
0x78
RW
A1 DRC3_CTRL2
[7:0]
DRCLELATT
DRCLELDEC
0x18
RW
A2 DRC3_CTRL3
[7:0]
DRCTHX1
0x00
RW
A3 DRC3_CTRL4
[7:0]
DRCTHX2
0x00
RW
A4 DRC3_CTRL5
[7:0]
DRCTHX3
0x00
RW
A5 DRC3_CTRL6
[7:0]
DRCTHX4
0xC0 RW
A6 DRC3_CTRL7
[7:0]
DRCTHY1
0x00
RW
A7 DRC3_CTRL8
[7:0]
DRCTHY2
0x00
RW
A8 DRC3_CTRL9
[7:0]
DRCTHY3
0x00
RW
A9 DRC3_CTRL10
[7:0]
DRCTHY4
0xC0 RW
Rev. 0 | Page 75 of 296
ADAU1373
Reg Name
Bits
AA DRC3_CTRL11
[7:0]
Bit 7
Bit 6
DRCGSATT
Bit 5
Bit 4
Bit 3
DRCGSDEC
0x88
AB DRC3_CTRL12
[7:0]
DRCHTNOR
DRCHTNG
0x7A RW
AC DRC3_CTRL13
[7:0]
AD DRC3_CTRL14
[7:0] DRCNGTGT
AE
DRC3_CTRL15
[7:0] RESERVED
AF
DRC3_CTRL16
[7:0]
B0
MDRC_PRE_
FILTER
[7:0]
B1
MDRC_SPL_
CTRL
[7:0]
B2
MDRC_CTRL
[7:0]
B3
PRE_HPF1_
COEFH
[7:0]
B4
PRE_HPF1_
COEFL
[7:0]
B5
PRE_HPF2_
COEFH
[7:0]
B6
PRE_HPF2_
COEFL
[7:0]
B7
PRE_HPF3_
COEFH
[7:0]
B8
PRE_HPF3_
COEFL
[7:0]
B9
PRE_HPF4_
COEFH
[7:0]
BA PRE_HPF4_
COEFL
[7:0]
BB
PRE_HPF5_
COEFH
[7:0]
BC PRE_HPF5_
COEFL
[7:0]
BD PRE_HPF_
CTRL
[7:0]
RESERVED
Bit 2
Bit 1
Bit 0
DRCG
DRCNGHDEN
DRCNGSRC
DRCCESRC
DRCLMSRC
RESERVED
DRCNGEN
SIG_DET_RMS
RESERVED
ALG_NGEN
RESERVED
SIG_DET_PK
0x00
RW
0x00
RW
0x00
RW
0x00
RW
0x00
RW
0xFF
RW
0xFF
RW
0xFF
RW
0xFF
RW
0xFF
RW
0xFF
RW
0xFF
RW
0xFF
RW
0xFF
RW
0xFF
RW
0x1F
RW
DRCIRQ_MODE
DRCIRQ_EN
MDRC_LPF
MDRC_LPFEN
MDRC_HPFEN
MDRC_EN
PRE_HPF1_COEFH
RESERVED
PRE_HPF_COEFL
PRE_HPF2_COEFH
RESERVED
PRE_HPF2_COEFL
PRE_HPF3_COEFH
RESERVED
PRE_HPF3_COEFL
PRE_HPF4_COEFH
RESERVED
PRE_HPF4_COEFL
PRE_HPF5_COEFH
RESERVED
RESERVED
PRE_HPF5_COEFL
PRE_HPF5_EN
RESERVED
PRE_HPF4_EN
0xDF RW
0x20
MDRC_CROSS_LOW
RESERVED
RW
DRCEN
MDRC_HPF
MDRC_CROSS_HIGH
Reset RW
PRE_HPF3_EN
PRE_HPF2_EN
PRE_HPF1_EN
RW
BE
EQ_CTRL1
[7:0]
BF
EQ_CTRL2
[7:0] EQEN
C0
E3D_CTRL1
[7:0]
E3D_LEVEL
C1
E3D_CTRL2
[7:0]
RESERVED
C2
ALC_CTRL0
[7:0]
ALCTAV
ALCHLD
0x00
RW
C3
ALC_CTRL1
[7:0]
ALCATT
ALCREC
0x00
RW
C4
ALC_CTRL2
[7:0]
ALCLVL
ALCREF
0x00
RW
C5
ALC_CTRL3
[7:0]
ALCRIP
ALCMAX
0x00
RW
C6
ALC_CTRL4
[7:0]
ALCNGTH
ALCNGHLD
0x00
RW
C7
ALC_CTRL5
[7:0]
ALCNGATT
ALCNGREC
0x00
RW
C8
ALC_CTRL6
[7:0] HLDRST
0x00
RW
EQBP7
EQBP6
EQ_UPDING
EQ_UPD_CLR
EQ_FORMAT
EQ_UPD
EQ_WR_EN
0x00
RW
EQBP5
EQBP4
EQBP3
EQBP2
EQBP1
0x00
RW
E3D_ALPHA
E3D_GAIN
ALCHPF
NGMODE
E3D_EN
ALCEN
ALCMODE
0x00
RW
0x00
RW
DC FDSP_SEL1
[7:0] RESERVED
DRC3_SEL
RESERVED
DRC2_SEL
0x00
RW
DD FDSP_SEL2
[7:0] RESERVED
EQ_SEL
RESERVED
DRC1_SEL
0x00
RW
DE FDSP_SEL3
[7:0] RESERVED
E3D_SEL
RESERVED
HPF_SEL
0x00
RW
DF FDSP_SEL4
[7:0] RESERVED
BASS_EN_SEL
ALC_4CHEN
ALC_SEL
0x00
RW
E0
PBALPCTRL1
[7:0] PBALPANA
PBALPWL
PBALPMODE
PBALPEN
0x00
RW
E1
PBBLPCTRL2
[7:0] PBBLPANA
PBBLPWL
PBBLPMODE
PBBLPEN
0x00
RW
E2
DIGMICCTRL
[7:0] MICLRMODE
DIGMICAEN
0x00
RW
E3
GPIOSEL1
[7:0]
0x00
RW
DMICPOLSWAP
DMICBLRSWAP
DIGMICBEN
GPIO2SEL
DMICALRSWAP
GPIO1SEL
E4
GPIOSEL2
[7:0]
0x00
RW
E5
IRQ_MASK
[7:0] ASRCC_IRQ_
MASK
ASRCB_IRQ_
MASK
GPIO4SEL
ASRCA_IRQ_
MASK
DRC_IRQ_
MASK
PLL_UNLOCK_
MASK
HP_CFG_MASK
GPIO3SEL
HP_DECT_MASK AFAULT_MASK
0x00
RW
E6
IRQ_RAW
[7:0] ASRCC_IRQ_
RAW_STATE
ASRCB_IRQ_
RAW_STATE
ASRCA_IRQ_
RAW_STATE
DRC_IRQ_
RAW_STATE
PLL_UNLOCK_
RAW_STATE
HP_CFG_
RAW_STATE
HP_DECT_
RAW_STATE
AFAULT_
RAW_STATE
02
R
E7
IRQ_STATE
[7:0] ASRCC_IRQ_
STATUS
ASRCB_IRQ_
STATUS
ASRCA_IRQ_
STATUS
DRC_IRQ_
STATUS
PLL_UNLOCK_
STATUS
HP_CFG_
STATUS
HP_DECT_
STATUS
AFAULT_STATUS 0x00
E8
IRQEN
[7:0]
IRQEN
0x00
RW
E9
PAD_CTRL1
[7:0]
I2CFILTER_
BYPASS
I2CDRV
DMICCLKDRV
CDRV
BDRV
ADRV
1F
RW
EA
PAD_CTRL2
[7:0]
EB
DIGEN
[7:0]
EC
LPCNTCTRL
[7:0]
ED CHIP_ID_HI
[7:0]
CHIP_ID_HI
13
R
EE
CHIP_ID_MID
[7:0]
CHIP_ID_MID
73
R
EF
CHIP_ID_LO
[7:0]
CHIP_ID_LOW
0B
R
FF
SOFT_RESET
[7:0]
SOFT_RST
0x00
MMRW
RESERVED
RESERVED
RESERVED
RESERVED
FDSPEN
R
GPIO4DRV
GPIO3DRV
GPIO2DRV
GPIO1DRV
0F
RW
DRECEN
RECEN
PBBEN
PBAEN
0x00
RW
0x00
RW
LPC_B_CNT
LPC_A_CNT
Rev. 0 | Page 76 of 296
ADAU1373
REGISTER BIT DESCRIPTIONS
INPUT_MODE REGISTER
Address: 0x00, Reset: 0x00, Name: INPUT_MODE
Sets the input mode to stereo (single-ended) or mono (differential).
Sets the input gain to either PGA or boost mode.
Table 35. Bit Descriptions for INPUT_MODE
Bits
7
Bit Name
GAINMODE3
Settings
0
1
6
GAINMODE2
0
1
5
GAINMODE1
0
1
4
GAINMODE0
0
1
3
INMODE3
0
1
2
INMODE2
0
1
1
INMODE1
0
1
0
INMODE0
0
1
Description
Input 4 Gain Mode.
Input 4 PGA Mode
Input 4 Boost Mode
Input 3 Gain Mode.
Input 3 PGA Mode
Input 3 Boost Mode
Input 2 Gain Mode.
Input 2 PGA Mode
Input 2 Boost Mode
Input 1 Gain Mode.
Input 1 PGA Mode
Input 1 Boost Mode
Input 4 Mode Control.
Input 4 Stereo Mode
Input 4 Mono Mode
Input 3 Mode Control.
Input 3 Stereo Mode
Input 3 Mono Mode
Input 2 Mode Control.
Input 2 Stereo Mode
Input 2 Mono Mode
Input 1 Mode Control.
Input 1 Stereo Mode
Input 1 Mono Mode
Rev. 0 | Page 77 of 296
Reset
0x0
Access
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
AIN1L_CTRL REGISTER
Address: 0x01, Reset: 0x00, Name: AIN1L_CTRL
Input 1 Left Gain Setting
PGA Mode: −12 dB to +18 dB in 1 dB steps
Boost Mode: 0 dB/9 dB/20 dB in three steps
Rev. 0 | Page 78 of 296
ADAU1373
Table 36. Bit Descriptions for AIN1L_CTRL
Bits
[7:5]
[4:0]
Bit Name
RESERVED
AIN1LVOL
Settings
00000
00001
00010
00011
00100
00101
00110
00111
01000
01001
01010
01011
01100
01101
01110
01111
10000
10001
10010
10011
10100
10101
10110
10111
11000
11001
11010
11011
11100
11101
11110
11111
Description
Reserved.
Analog Channel 1 Input Volume Control.
PGA = Mute, Boost Mode = Mute
PGA = −12 dB, Boost Mode = 0 dB
PGA = −11 dB, Boost Mode = 0 dB
PGA = −10 dB, Boost Mode = 0 dB
PGA = −9 dB, Boost Mode = 0 dB
PGA = −8 dB, Boost Mode = 0 dB
PGA = −7 dB, Boost Mode = 0 dB
PGA = −6 dB, Boost Mode = 0 dB
PGA = −5 dB, Boost Mode = 0 dB
PGA = −4 dB, Boost Mode = 0 dB
PGA = −3 dB, Boost Mode = 0 dB
PGA = −2 dB, Boost Mode = 0 dB
PGA = −1 dB, Boost Mode = 0 dB
PGA = 0 dB, Boost Mode = 0 dB
PGA = 1 dB, Boost Mode = 9 dB
PGA = 2 dB, Boost Mode = 9 dB
PGA = 3 dB, Boost Mode = 9 dB
PGA = 4 dB, Boost Mode = 9 dB
PGA = 5 dB, Boost Mode = 9 dB
PGA = 6 dB, Boost Mode = 9 dB
PGA = 7 dB, Boost Mode = 20 dB
PGA = 8 dB, Boost Mode = 20 dB
PGA = 9 dB, Boost Mode = 20 dB
PGA = 10 dB, Boost Mode = 20 dB
PGA = 11 dB, Boost Mode = 20 dB
PGA = 12 dB, Boost Mode = 20 dB
PGA = 13 dB, Boost Mode = 20 dB
PGA = 14 dB, Boost Mode = 20 dB
PGA = 15 dB, Boost Mode = 20 dB
PGA = 16 dB, Boost Mode = 20 dB
PGA = 17 dB, Boost Mode = 20 dB
PGA = 18 dB, Boost Mode = 20 dB
Rev. 0 | Page 79 of 296
Reset
0x0
0x00
Access
RW
RW
ADAU1373
AIN1R_CTRL REGISTER
Address: 0x02, Reset: 0x00, Name: AIN1R_CTRL
Input 1 Right Gain Setting
PGA Mode: −12 dB to +18 dB in 1 dB steps
Boost Mode: 0 dB/9 dB/20 dB in three steps
Rev. 0 | Page 80 of 296
ADAU1373
Table 37. Bit Descriptions for AIN1R_CTRL
Bits
[7:5]
[4:0]
Bit Name
RESERVED
AIN1RVOL
Settings
00000
00001
00010
00011
00100
00101
00110
00111
01000
01001
01010
01011
01100
01101
01110
01111
10000
10001
10010
10011
10100
10101
10110
10111
11000
11001
11010
11011
11100
11101
11110
11111
Description
Reserved.
Analog Channel 1 Input Volume Control.
PGA = Mute, Boost Mode = Mute
PGA = −12 dB, Boost Mode = 0 dB
PGA = −11 dB, Boost Mode = 0 dB
PGA = −10 dB, Boost Mode = 0 dB
PGA = −9 dB, Boost Mode = 0 dB
PGA = −8 dB, Boost Mode = 0 dB
PGA = −7 dB, Boost Mode = 0 dB
PGA = −6 dB, Boost Mode = 0 dB
PGA = −5 dB, Boost Mode = 0 dB
PGA = −4 dB, Boost Mode = 0 dB
PGA = −3 dB, Boost Mode = 0 dB
PGA = −2 dB, Boost Mode = 0 dB
PGA = −1 dB, Boost Mode = 0 dB
PGA = 0 dB, Boost Mode = 0 dB
PGA = 1 dB, Boost Mode = 9 dB
PGA = 2 dB, Boost Mode = 9 dB
PGA = 3 dB, Boost Mode = 9 dB
PGA = 4 dB, Boost Mode = 9 dB
PGA = 5 dB, Boost Mode = 9 dB
PGA = 6 dB, Boost Mode = 9 dB
PGA = 7 dB, Boost Mode = 20 dB
PGA = 8 dB, Boost Mode = 20 dB
PGA = 9 dB, Boost Mode = 20 dB
PGA = 10 dB, Boost Mode = 20 dB
PGA = 11 dB, Boost Mode = 20 dB
PGA = 12 dB, Boost Mode = 20 dB
PGA = 13 dB, Boost Mode = 20 dB
PGA = 14 dB, Boost Mode = 20 dB
PGA = 15 dB, Boost Mode = 20 dB
PGA = 16 dB, Boost Mode = 20 dB
PGA = 17 dB, Boost Mode = 20 dB
PGA = 18 dB, Boost Mode = 20 dB
Rev. 0 | Page 81 of 296
Reset
0x0
0x00
Access
RW
RW
ADAU1373
AIN2L_CTRL REGISTER
Address: 0x03, Reset: 0x00, Name: AIN2L_CTRL
Input 2 Left Gain Setting
PGA Mode: −12 dB to +18 dB in 1 dB steps
Boost Mode: 0 dB/9 dB/20 dB in three steps
Rev. 0 | Page 82 of 296
ADAU1373
Table 38. Bit Descriptions for AIN2L_CTRL
Bits
[7:5]
[4:0]
Bit Name
RESERVED
AIN2LVOL
Settings
00000
00001
00010
00011
00100
00101
00110
00111
01000
01001
01010
01011
01100
01101
01110
01111
10000
10001
10010
10011
10100
10101
10110
10111
11000
11001
11010
11011
11100
11101
11110
11111
Description
Reserved.
Analog Channel 2 Input Volume Control.
PGA = Mute, Boost Mode = Mute
PGA = −12 dB, Boost Mode = 0 dB
PGA = −11 dB, Boost Mode = 0 dB
PGA = −10 dB, Boost Mode = 0 dB
PGA = −9 dB, Boost Mode = 0 dB
PGA = −8 dB, Boost Mode = 0 dB
PGA = −7 dB, Boost Mode = 0 dB
PGA = −6 dB, Boost Mode = 0 dB
PGA = −5 dB, Boost Mode = 0 dB
PGA = −4 dB, Boost Mode = 0 dB
PGA = −3 dB, Boost Mode = 0 dB
PGA = −2 dB, Boost Mode = 0 dB
PGA = −1 dB, Boost Mode = 0 dB
PGA = 0 dB, Boost Mode = 0 dB
PGA = 1 dB, Boost Mode = 9 dB
PGA = 2 dB, Boost Mode = 9 dB
PGA = 3 dB, Boost Mode = 9 dB
PGA = 4 dB, Boost Mode = 9 dB
PGA = 5 dB, Boost Mode = 9 dB
PGA = 6 dB, Boost Mode = 9 dB
PGA = 7 dB, Boost Mode = 20 dB
PGA = 8 dB, Boost Mode = 20 dB
PGA = 9 dB, Boost Mode = 20 dB
PGA = 10 dB, Boost Mode = 20 dB
PGA = 11 dB, Boost Mode = 20 dB
PGA = 12 dB, Boost Mode = 20 dB
PGA = 13 dB, Boost Mode = 20 dB
PGA = 14 dB, Boost Mode = 20 dB
PGA = 15 dB, Boost Mode = 20 dB
PGA = 16 dB, Boost Mode = 20 dB
PGA = 17 dB, Boost Mode = 20 dB
PGA = 18 dB, Boost Mode = 20 dB
Rev. 0 | Page 83 of 296
Reset
0x0
0x00
Access
RW
RW
ADAU1373
AIN2R_CTRL REGISTER
Address: 0x04, Reset: 0x00, Name: AIN2R_CTRL
Input 2 Right Gain Setting
PGA Mode: −12 dB to +18 dB in 1 dB steps
Boost Mode: 0 dB/9 dB/20 dB in three steps
Rev. 0 | Page 84 of 296
ADAU1373
Table 39. Bit Descriptions for AIN2R_CTRL
Bits
[7:5]
[4:0]
Bit Name
RESERVED
AIN2RVOL
Settings
00000
00001
00010
00011
00100
00101
00110
00111
01000
01001
01010
01011
01100
01101
01110
01111
10000
10001
10010
10011
10100
10101
10110
10111
11000
11001
11010
11011
11100
11101
11110
11111
Description
Reserved.
Analog Channel 2 Input Volume Control.
PGA = Mute, Boost Mode = Mute
PGA = −12 dB, Boost Mode = 0 dB
PGA = −11 dB, Boost Mode = 0 dB
PGA = −10 dB, Boost Mode = 0 dB
PGA = −9 dB, Boost Mode = 0 dB
PGA = −8 dB, Boost Mode = 0 dB
PGA = −7 dB, Boost Mode = 0 dB
PGA = −6 dB, Boost Mode = 0 dB
PGA = −5 dB, Boost Mode = 0 dB
PGA = −4 dB, Boost Mode = 0 dB
PGA = −3 dB, Boost Mode = 0 dB
PGA = −2 dB, Boost Mode = 0 dB
PGA = −1 dB, Boost Mode = 0 dB
PGA = 0 dB, Boost Mode = 0 dB
PGA = 1 dB, Boost Mode = 9 dB
PGA = 2 dB, Boost Mode = 9 dB
PGA = 3 dB, Boost Mode = 9 dB
PGA = 4 dB, Boost Mode = 9 dB
PGA = 5 dB, Boost Mode = 9 dB
PGA = 6 dB, Boost Mode = 9 dB
PGA = 7 dB, Boost Mode = 20 dB
PGA = 8 dB, Boost Mode = 20 dB
PGA = 9 dB, Boost Mode = 20 dB
PGA = 10 dB, Boost Mode = 20 dB
PGA = 11 dB, Boost Mode = 20 dB
PGA = 12 dB, Boost Mode = 20 dB
PGA = 13 dB, Boost Mode = 20 dB
PGA = 14 dB, Boost Mode = 20 dB
PGA = 15 dB, Boost Mode = 20 dB
PGA = 16 dB, Boost Mode = 20 dB
PGA = 17 dB, Boost Mode = 20 dB
PGA = 18 dB, Boost Mode = 20 dB
Rev. 0 | Page 85 of 296
Reset
0x0
0x00
Access
RW
RW
ADAU1373
AIN3L_CTRL REGISTER
Address: 0x05, Reset: 0x00, Name: AIN3L_CTRL
Input 3 Left Gain Setting
PGA Mode: −12 dB to +18 dB in 1 dB steps
Boost Mode: 0 dB/9 dB/20 dB in three steps
Rev. 0 | Page 86 of 296
ADAU1373
Table 40. Bit Descriptions for AIN3L_CTRL
Bits
[7:5]
[4:0]
Bit Name
RESERVED
AIN3LVOL
Settings
00000
00001
00010
00011
00100
00101
00110
00111
01000
01001
01010
01011
01100
01101
01110
01111
10000
10001
10010
10011
10100
10101
10110
10111
11000
11001
11010
11011
11100
11101
11110
11111
Description
Reserved.
Analog Channel 3 Input Volume Control.
PGA = Mute, Boost Mode = Mute
PGA = −12 dB, Boost Mode = 0 dB
PGA = −11 dB, Boost Mode = 0 dB
PGA = −10 dB, Boost Mode = 0 dB
PGA = −9 dB, Boost Mode = 0 dB
PGA = −8 dB, Boost Mode = 0 dB
PGA = −7 dB, Boost Mode = 0 dB
PGA = −6 dB, Boost Mode = 0 dB
PGA = −5 dB, Boost Mode = 0 dB
PGA = −4 dB, Boost Mode = 0 dB
PGA = −3 dB, Boost Mode = 0 dB
PGA = −2 dB, Boost Mode = 0 dB
PGA = −1 dB, Boost Mode = 0 dB
PGA = 0 dB, Boost Mode = 0 dB
PGA = 1 dB, Boost Mode = 9 dB
PGA = 2 dB, Boost Mode = 9 dB
PGA = 3 dB, Boost Mode = 9 dB
PGA = 4 dB, Boost Mode = 9 dB
PGA = 5 dB, Boost Mode = 9 dB
PGA = 6 dB, Boost Mode = 9 dB
PGA = 7 dB, Boost Mode = 20 dB
PGA = 8 dB, Boost Mode = 20 dB
PGA = 9 dB, Boost Mode = 20 dB
PGA = 10 dB, Boost Mode = 20 dB
PGA = 11 dB, Boost Mode = 20 dB
PGA = 12 dB, Boost Mode = 20 dB
PGA = 13 dB, Boost Mode = 20 dB
PGA = 14 dB, Boost Mode = 20 dB
PGA = 15 dB, Boost Mode = 20 dB
PGA = 16 dB, Boost Mode = 20 dB
PGA = 17 dB, Boost Mode = 20 dB
PGA = 18 dB, Boost Mode = 20 dB
Rev. 0 | Page 87 of 296
Reset
0x0
0x00
Access
RW
RW
ADAU1373
AIN3R_CTRL REGISTER
Address: 0x06, Reset: 0x00, Name: AIN3R_CTRL
Input 3 Right Gain Setting
PGA Mode: −12 dB to +18 dB in 1 dB steps
Boost Mode: 0 dB/9 dB/20 dB in three steps
Rev. 0 | Page 88 of 296
ADAU1373
Table 41. Bit Descriptions for AIN3R_CTRL
Bits
[7:5]
[4:0]
Bit Name
RESERVED
AIN3RVOL
Settings
00000
00001
00010
00011
00100
00101
00110
00111
01000
01001
01010
01011
01100
01101
01110
01111
10000
10001
10010
10011
10100
10101
10110
10111
11000
11001
11010
11011
11100
11101
11110
11111
Description
Reserved.
Analog Channel 3 Input Volume Control.
PGA = Mute, Boost Mode = Mute
PGA = −12 dB, Boost Mode = 0 dB
PGA = −11 dB, Boost Mode = 0 dB
PGA = −10 dB, Boost Mode = 0 dB
PGA = −9 dB, Boost Mode = 0 dB
PGA = −8 dB, Boost Mode = 0 dB
PGA = −7 dB, Boost Mode = 0 dB
PGA = −6 dB, Boost Mode = 0 dB
PGA = −5 dB, Boost Mode = 0 dB
PGA = −4 dB, Boost Mode = 0 dB
PGA = −3 dB, Boost Mode = 0 dB
PGA = −2 dB, Boost Mode = 0 dB
PGA = −1 dB, Boost Mode = 0 dB
PGA = 0 dB, Boost Mode = 0 dB
PGA = 1 dB, Boost Mode = 9 dB
PGA = 2 dB, Boost Mode = 9 dB
PGA = 3 dB, Boost Mode = 9 dB
PGA = 4 dB, Boost Mode = 9 dB
PGA = 5 dB, Boost Mode = 9 dB
PGA = 6 dB, Boost Mode = 9 dB
PGA = 7 dB, Boost Mode = 20 dB
PGA = 8 dB, Boost Mode = 20 dB
PGA = 9 dB, Boost Mode = 20 dB
PGA = 10 dB, Boost Mode = 20 dB
PGA = 11 dB, Boost Mode = 20 dB
PGA = 12 dB, Boost Mode = 20 dB
PGA = 13 dB, Boost Mode = 20 dB
PGA = 14 dB, Boost Mode = 20 dB
PGA = 15 dB, Boost Mode = 20 dB
PGA = 16 dB, Boost Mode = 20 dB
PGA = 17 dB, Boost Mode = 20 dB
PGA = 18 dB, Boost Mode = 20 dB
Rev. 0 | Page 89 of 296
Reset
0x0
0x00
Access
RW
RW
ADAU1373
AIN4L_CTRL REGISTER
Address: 0x07, Reset: 0x00, Name: AIN4L_CTRL
Input 4 Left Gain Setting
PGA Mode: −12 dB to +18 dB in 1 dB steps
Boost Mode: 0 dB/9 dB/20 dB in three steps
Rev. 0 | Page 90 of 296
ADAU1373
Table 42. Bit Descriptions for AIN4L_CTRL
Bits
[7:5]
[4:0]
Bit Name
RESERVED
AIN4LVOL
Settings
00000
00001
00010
00011
00100
00101
00110
00111
01000
01001
01010
01011
01100
01101
01110
01111
10000
10001
10010
10011
10100
10101
10110
10111
11000
11001
11010
11011
11100
11101
11110
11111
Description
Reserved.
Analog Channel 4 Input Volume Control.
PGA = Mute, Boost Mode = Mute
PGA = −12 dB, Boost Mode = 0 dB
PGA = −11 dB, Boost Mode = 0 dB
PGA = −10 dB, Boost Mode = 0 dB
PGA = −9 dB, Boost Mode = 0 dB
PGA = −8 dB, Boost Mode = 0 dB
PGA = −7 dB, Boost Mode = 0 dB
PGA = −6 dB, Boost Mode = 0 dB
PGA = −5 dB, Boost Mode = 0 dB
PGA = −4 dB, Boost Mode = 0 dB
PGA = −3 dB, Boost Mode = 0 dB
PGA = −2 dB, Boost Mode = 0 dB
PGA = −1 dB, Boost Mode = 0 dB
PGA = 0 dB, Boost Mode = 0 dB
PGA = 1 dB, Boost Mode = 9 dB
PGA = 2 dB, Boost Mode = 9 dB
PGA = 3 dB, Boost Mode = 9 dB
PGA = 4 dB, Boost Mode = 9 dB
PGA = 5 dB, Boost Mode = 9 dB
PGA = 6 dB, Boost Mode = 9 dB
PGA = 7 dB, Boost Mode = 20 dB
PGA = 8 dB, Boost Mode = 20 dB
PGA = 9 dB, Boost Mode = 20 dB
PGA = 10 dB, Boost Mode = 20 dB
PGA = 11 dB, Boost Mode = 20 dB
PGA = 12 dB, Boost Mode = 20 dB
PGA = 13 dB, Boost Mode = 20 dB
PGA = 14 dB, Boost Mode = 20 dB
PGA = 15 dB, Boost Mode = 20 dB
PGA = 16 dB, Boost Mode = 20 dB
PGA = 17 dB, Boost Mode = 20 dB
PGA = 18 dB, Boost Mode = 20 dB
Rev. 0 | Page 91 of 296
Reset
0x0
0x00
Access
RW
RW
ADAU1373
AIN4R_CTRL REGISTER
Address: 0x08, Reset: 0x00, Name: AIN4R_CTRL
Input 4 Right Gain Setting
PGA Mode: −12 dB to +18 dB in 1 dB steps
Boost Mode: 0 dB/9 dB/20 dB in three steps
Rev. 0 | Page 92 of 296
ADAU1373
Table 43. Bit Descriptions for AIN4R_CTRL
Bits
[7:5]
[4:0]
Bit Name
RESERVED
AIN4RVOL
Settings
00000
00001
00010
00011
00100
00101
00110
00111
01000
01001
01010
01011
01100
01101
01110
01111
10000
10001
10010
10011
10100
10101
10110
10111
11000
11001
11010
11011
11100
11101
11110
11111
Description
Reserved.
Analog Channel 4 Input Volume Control.
PGA = Mute, Boost Mode = Mute
PGA = −12 dB, Boost Mode = 0 dB
PGA = −11 dB, Boost Mode = 0 dB
PGA = −10 dB, Boost Mode = 0 dB
PGA = −9 dB, Boost Mode = 0 dB
PGA = −8 dB, Boost Mode = 0 dB
PGA = −7 dB, Boost Mode = 0 dB
PGA = −6 dB, Boost Mode = 0 dB
PGA = −5 dB, Boost Mode = 0 dB
PGA = −4 dB, Boost Mode = 0 dB
PGA = −3 dB, Boost Mode = 0 dB
PGA = −2 dB, Boost Mode = 0 dB
PGA = −1 dB, Boost Mode = 0 dB
PGA = 0 dB, Boost Mode = 0 dB
PGA = 1 dB, Boost Mode = 9 dB
PGA = 2 dB, Boost Mode = 9 dB
PGA = 3 dB, Boost Mode = 9 dB
PGA = 4 dB, Boost Mode = 9 dB
PGA = 5 dB, Boost Mode = 9 dB
PGA = 6 dB, Boost Mode = 9 dB
PGA = 7 dB, Boost Mode = 20 dB
PGA = 8 dB, Boost Mode = 20 dB
PGA = 9 dB, Boost Mode = 20 dB
PGA = 10 dB, Boost Mode = 20 dB
PGA = 11 dB, Boost Mode = 20 dB
PGA = 12 dB, Boost Mode = 20 dB
PGA = 13 dB, Boost Mode = 20 dB
PGA = 14 dB, Boost Mode = 20 dB
PGA = 15 dB, Boost Mode = 20 dB
PGA = 16 dB, Boost Mode = 20 dB
PGA = 17 dB, Boost Mode = 20 dB
PGA = 18 dB, Boost Mode = 20 dB
Rev. 0 | Page 93 of 296
Reset
0x0
0x00
Access
RW
RW
ADAU1373
LLINE1_OUT REGISTER
Address: 0x09, Reset: 0x00, Name: LLINE1_OUT
Line Output 1 Left Gain Control
Rev. 0 | Page 94 of 296
ADAU1373
Table 44. Bit Descriptions for LLINE1_OUT
Bits
[7:5]
[4:0]
Bit Name
RESERVED
LLINE1
Settings
00000
00001
00010
00011
00100
00101
00110
00111
01000
01001
01010
01011
01100
01101
01110
01111
10000
10001
10010
10011
10100
10101
10110
10111
11000
11001
11010
11011
11100
11101
11110
11111
Description
Reserved.
Left Channel Line Output 1 Volume Control.
Mute
−75 dB
−71 dB
−67 dB
−63 dB
−59 dB
−55 dB
−51 dB
−47 dB
−44 dB
−41 dB
−38 dB
−35 dB
−32 dB
−29 dB
−26 dB
−23 dB
−21 dB
−19 dB
−17 dB
−15 dB
−13 dB
−11 dB
−9 dB
−7 dB
−6 dB
−5 dB
−4 dB
−3 dB
−2 dB
−1 dB
0 dB
Rev. 0 | Page 95 of 296
Reset
0x0
0x00
Access
RW
RW
ADAU1373
RLINE1_OUT REGISTER
Address: 0x0A, Reset: 0x00, Name: RLINE1_OUT
Line Output 1 Right Gain Control
Rev. 0 | Page 96 of 296
ADAU1373
Table 45. Bit Descriptions for RLINE1_OUT
Bits
[7:5]
[4:0]
Bit Name
RESERVED
RLINE1
Settings
00000
00001
00010
00011
00100
00101
00110
00111
01000
01001
01010
01011
01100
01101
01110
01111
10000
10001
10010
10011
10100
10101
10110
10111
11000
11001
11010
11011
11100
11101
11110
11111
Description
Reserved.
Right Channel Line Output 1 Volume Control.
Mute
−75 dB
−71 dB
−67 dB
−63 dB
−59 dB
−55 dB
−51 dB
−47 dB
−44 dB
−41 dB
−38 dB
−35 dB
−32 dB
−29 dB
−26 dB
−23 dB
−21 dB
−19 dB
−17 dB
−15 dB
−13 dB
−11 dB
−9 dB
−7 dB
−6 dB
−5 dB
−4 dB
−3 dB
−2 dB
−1 dB
0 dB
Rev. 0 | Page 97 of 296
Reset
0x0
0x00
Access
RW
RW
ADAU1373
LLINE2_OUT REGISTER
Address: 0x0B, Reset: 0x00, Name: LLINE2_OUT
Line Output 2 Left Gain Control
Rev. 0 | Page 98 of 296
ADAU1373
Table 46. Bit Descriptions for LLINE2_OUT
Bits
[7:5]
[4:0]
Bit Name
RESERVED
LLINE2
Settings
00000
00001
00010
00011
00100
00101
00110
00111
01000
01001
01010
01011
01100
01101
01110
01111
10000
10001
10010
10011
10100
10101
10110
10111
11000
11001
11010
11011
11100
11101
11110
11111
Description
Reserved.
Left Channel Line Output 2 Volume Control.
Mute
−75 dB
−71 dB
−67 dB
−63 dB
−59 dB
−55 dB
−51 dB
−47 dB
−44 dB
−41 dB
−38 dB
−35 dB
−32 dB
−29 dB
−26 dB
−23 dB
−21 dB
−19 dB
−17 dB
−15 dB
−13 dB
−11 dB
−9 dB
−7 dB
−6 dB
−5 dB
−4 dB
−3 dB
−2 dB
−1 dB
0 dB
Rev. 0 | Page 99 of 296
Reset
0x0
0x00
Access
RW
RW
ADAU1373
RLINE2_OUT REGISTER
Address: 0x0C, Reset: 0x00, Name: RLINE2_OUT
Line Output 2 Right Gain Control
Rev. 0 | Page 100 of 296
ADAU1373
Table 47. Bit Descriptions for RLINE2_OUT
Bits
[7:5]
[4:0]
Bit Name
RESERVED
RLINE2
Settings
00000
00001
00010
00011
00100
00101
00110
00111
01000
01001
01010
01011
01100
01101
01110
01111
10000
10001
10010
10011
10100
10101
10110
10111
11000
11001
11010
11011
11100
11101
11110
11111
Description
Reserved.
Right Channel Line Output 2 Volume Control.
Mute
−75 dB
−71 dB
−67 dB
−63 dB
−59 dB
−55 dB
−51 dB
−47 dB
−44 dB
−41 dB
−38 dB
−35 dB
−32 dB
−29 dB
−26 dB
−23 dB
−21 dB
−19 dB
−17 dB
−15 dB
−13 dB
−11 dB
−9 dB
−7 dB
−6 dB
−5 dB
−4 dB
−3 dB
−2 dB
−1 dB
0 dB
Rev. 0 | Page 101 of 296
Reset
0x0
0x00
Access
RW
RW
ADAU1373
LCD_OUT (SPEAKER) REGISTER
Address: 0x0D, Reset: 0x00, Name: LCD_OUT
Speaker Out Left Gain Control
Rev. 0 | Page 102 of 296
ADAU1373
Table 48. Bit Descriptions for LCD_OUT
Bits
[7:5]
[4:0]
Bit Name
RESERVED
LCD
Settings
00000
00001
00010
00011
00100
00101
00110
00111
01000
01001
01010
01011
01100
01101
01110
01111
10000
10001
10010
10011
10100
10101
10110
10111
11000
11001
11010
11011
11100
11101
11110
11111
Description
Reserved.
Left Channel Class-D Output Volume Control.
Mute
−75 dB
−71 dB
−67 dB
−63 dB
−59 dB
−55 dB
−51 dB
−47 dB
−44 dB
−41 dB
−38 dB
−35 dB
−32 dB
−29 dB
−26 dB
−23 dB
−21 dB
−19 dB
−17 dB
−15 dB
−13 dB
−11 dB
−9 dB
−7 dB
−6 dB
−5 dB
−4 dB
−3 dB
−2 dB
−1 dB
0 dB
Rev. 0 | Page 103 of 296
Reset
0x0
0x00
Access
RW
RW
ADAU1373
RCD_OUT (SPEAKER) REGISTER
Address: 0x0E, Reset: 0x00, Name: RCD_OUT
Speaker Out Right Gain Control
Rev. 0 | Page 104 of 296
ADAU1373
Table 49. Bit Descriptions for RCD_OUT
Bits
[7:5]
[4:0]
Bit Name
RESERVED
RCD
Settings
00000
00001
00010
00011
00100
00101
00110
00111
01000
01001
01010
01011
01100
01101
01110
01111
10000
10001
10010
10011
10100
10101
10110
10111
11000
11001
11010
11011
11100
11101
11110
11111
Description
Reserved.
Right Channel Class-D Output Volume Control.
Mute
−75 dB
−71 dB
−67 dB
−63 dB
−59 dB
−55 dB
−51 dB
−47 dB
−44 dB
−41 dB
−38 dB
−35 dB
−32 dB
−29 dB
−26 dB
−23 dB
−21 dB
−19 dB
−17 dB
−15 dB
−13 dB
−11 dB
−9 dB
−7 dB
−6 dB
−5 dB
−4 dB
−3 dB
−2 dB
−1 dB
0 dB
Rev. 0 | Page 105 of 296
Reset
0x0
0x00
Access
RW
RW
ADAU1373
LHP_OUT REGISTER
Address: 0x0F, Reset: 0x00, Name: LHP_OUT
Headphone Out Left Gain Control
Rev. 0 | Page 106 of 296
ADAU1373
Table 50. Bit Descriptions for LHP_OUT
Bits
[7:5]
[4:0]
Bit Name
RESERVED
LHP
Settings
00000
00001
00010
00011
00100
00101
00110
00111
01000
01001
01010
01011
01100
01101
01110
01111
10000
10001
10010
10011
10100
10101
10110
10111
11000
11001
11010
11011
11100
11101
11110
11111
Description
Reserved.
Left Channel Headphone Output Volume Control.
Mute
−75 dB
−71 dB
−67 dB
−63 dB
−59 dB
−55 dB
−51 dB
−47 dB
−44 dB
−41 dB
−38 dB
−35 dB
−32 dB
−29 dB
−26 dB
−23 dB
−21 dB
−19 dB
−17 dB
−15 dB
−13 dB
−11 dB
−9 dB
−7 dB
−6 dB
−5 dB
−4 dB
−3 dB
−2 dB
−1 dB
0 dB
Rev. 0 | Page 107 of 296
Reset
0x0
0x00
Access
RW
RW
ADAU1373
RHP_OUT REGISTER
Address: 0x10, Reset: 0x00, Name: RHP_OUT
Headphone Out Right Gain Control
Rev. 0 | Page 108 of 296
ADAU1373
Table 51. Bit Descriptions for RHP_OUT
Bits
[7:5]
[4:0]
Bit Name
RESERVED
RHP
Settings
00000
00001
00010
00011
00100
00101
00110
00111
01000
01001
01010
01011
01100
01101
01110
01111
10000
10001
10010
10011
10100
10101
10110
10111
11000
11001
11010
11011
11100
11101
11110
11111
Description
Reserved.
Right Channel Headphone Output Volume Control.
Mute
−75 dB
−71 dB
−67 dB
−63 dB
−59 dB
−55 dB
−51 dB
−47 dB
−44 dB
−41 dB
−38 dB
−35 dB
−32 dB
−29 dB
−26 dB
−23 dB
−21 dB
−19 dB
−17 dB
−15 dB
−13 dB
−11 dB
−9 dB
−7 dB
−6 dB
−5 dB
−4 dB
−3 dB
−2 dB
−1 dB
0 dB
Rev. 0 | Page 109 of 296
Reset
0x0
0x00
Access
RW
RW
ADAU1373
ADC_GAIN REGISTER
Address: 0x11, Reset: 0x00, Name: ADC_GAIN
20 dB Boost Gain Control, Pre-ADC
Table 52. Bit Descriptions for ADC_GAIN
Bits
7
Bit Name
ADCRGAIN3
Settings
0
1
6
ADCRGAIN2
0
1
5
ADCRGAIN1
0
1
4
ADCRGAIN0
0
1
3
ADCLGAIN3
0
1
2
ADCLGAIN2
0
1
1
ADCLGAIN1
0
1
0
ADCLGAIN0
0
1
Description
Input 4 Right Boost Control.
Input 4 Right ADC, 20 dB Boost Disable
Input 4 Right ADC, 20 dB Boost Enable
Input 3 Right Boost Control.
Input 3 Right ADC, 20 dB Boost Disable
Input 3 Right ADC, 20 dB Boost Enable
Input 2 Right Boost Control.
Input 2 Right ADC, 20 dB Boost Disable
Input 2 Right ADC, 20 dB Boost Enable
Input 1 Right Boost Control.
Input 1 Right ADC, 20 dB Boost Disable
Input 1 Right ADC, 20 dB Boost Enable
Input 4 Left Boost Control.
Input 4 left ADC, 20 dB Boost Disable
Input 4 left ADC, 20 dB Boost Enable
Input 3 Left Boost Control.
Input 3 left ADC, 20 dB Boost Disable
Input 3 left ADC, 20 dB Boost Enable
Input 2 Left Boost Control.
Input 2 left ADC, 20 dB Boost Disable
Input 2 left ADC, 20 dB Boost Enable
Input 1 Left Boost Control.
Input 1 left ADC, 20 dB Boost Disable
Input 1 left ADC, 20 dB Boost Enable
Rev. 0 | Page 110 of 296
Reset
0x0
Access
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
LADC_MIXER REGISTER
Address: 0x12, Reset: 0x00, Name: LADC_MIXER
Left ADC Mixer Control
Table 53. Bit Descriptions for LADC_MIXER
Bits
[7:5]
4
Bit Name
RESERVED
ADCLMIX4
Settings
0
1
3
ADCLMIX3
0
1
2
ADCLMIX2
0
1
1
ADCLMIX1
0
1
0
ADCLMIX0
0
1
Description
Reserved.
Left Channel ADC Mixer Control.
DAC1 Left Signal Disable
DAC1 Left Signal Enable
Left Channel ADC Mixer Control.
AIN4 Signal Disable
AIN4 Signal Enable
Left Channel ADC Mixer Control.
AIN3 Signal Disable
AIN3 Signal Enable
Left Channel ADC Mixer Control.
AIN2 Signal Disable
AIN2 Signal Enable
Left Channel ADC Mixer Control.
AIN1 Signal Disable
AIN1 Signal Enable
Rev. 0 | Page 111 of 296
Reset
0x0
0x0
Access
RW
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
RADC_MIXER REGISTER
Address: 0x13, Reset: 0x00, Name: RADC_MIXER
Right ADC Mixer Control
Table 54. Bit Descriptions for RADC_MIXER
Bits
[7:5]
4
Bit Name
RESERVED
ADCRMIX4
Settings
0
1
3
ADCRMIX3
0
1
2
ADCRMIX2
0
1
1
ADCRMIX1
0
1
0
ADCRMIX0
0
1
Description
Reserved.
Right Channel ADC Mixer Control.
DAC1 Right Signal Disable
DAC1 Right Signal Enable
Right Channel ADC Mixer Control.
AIN4 Signal Disable
AIN4 Signal Enable
Right Channel ADC Mixer Control.
AIN3 Signal Disable
AIN3 Signal Enable
Right Channel ADC Mixer Control.
AIN2 Signal Disable
AIN2 Signal Enable
Right Channel ADC Mixer Control.
AIN1 Signal Disable
AIN1 Signal Enable
Rev. 0 | Page 112 of 296
Reset
0x0
0x0
Access
RW
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
LLINE1MIX REGISTER
Address: 0x14, Reset: 0x00, Name: LLINE1MIX
Lineout 1 Left Mixer Control
Table 55. Bit Descriptions for LLINE1MIX
Bits
7
6
5
4
3
2
1
0
Bit Name
LLINE1MIX7
Settings
Description
0
1
DAC2 Right Signal Disable
DAC2 Right Signal Enable
0
1
DAC2 Left Signal Disable
DAC2 Left Signal Enable
0
1
DAC1 Right Signal Disable
DAC1 Right Signal Enable
0
1
DAC1 Left Signal Disable
DAC1 Left Signal Enable
0
1
Input 4 Left Signal Disable
Input 4 Left Signal Enable
0
1
Input 3 Left Signal Disable
Input 3 Left Signal Enable
0
1
Input 2 Left Signal Disable
Input 2 Left Signal Enable
0
1
Input 1 Left Signal Disable
Input 1 Left Signal Enable
LLINE1MIX6
LLINE1MIX5
LLINE1MIX4
LLINE1MIX3
LLINE1MIX2
LLINE1MIX1
LLINE1MIX0
Rev. 0 | Page 113 of 296
Reset
0x0
Access
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
RLINE1MIX REGISTER
Address: 0x15, Reset: 0x00, Name: RLINE1MIX
Lineout 1 Right Mixer Control
Table 56. Bit Descriptions for RLINE1MIX
Bits
7
6
5
4
3
2
1
0
Bit Name
RLINE1MIX7
Settings
Description
0
1
DAC2 Right Signal Disable
DAC2 Right Signal Enable
0
1
DAC2 Left Signal Disable
DAC2 Left Signal Enable
0
1
DAC1 Right Signal Disable
DAC1 Right Signal Enable
0
1
DAC1 Left Signal Disable
DAC1 Left Signal Enable
0
1
Input 4 Right Signal Disable
Input 4 Right Signal Enable
0
1
Input 3 Right Signal Disable
Input 3 Right Signal Enable
0
1
Input 2 Right Signal Disable
Input 2 Right Signal Enable
0
1
Input 1 Right Signal Disable
Input 1 Right Signal Enable
RLINE1MIX6
RLINE1MIX5
RLINE1MIX4
RLINE1MIX3
RLINE1MIX2
RLINE1MIX1
RLINE1MIX0
Rev. 0 | Page 114 of 296
Reset
0x0
Access
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
LLINE2MIX REGISTER
Address: 0x16, Reset: 0x00, Name: LLINE2MIX
Lineout 2 Left Mixer Control
Table 57. Bit Descriptions for LLINE2MIX
Bits
7
6
5
4
3
2
1
0
Bit Name
LLINE2MIX7
Settings
Description
0
1
DAC2 Right Signal Disable
DAC2 Right Signal Enable
0
1
DAC2 Left Signal Disable
DAC2 Left Signal Enable
0
1
DAC1 Right Signal Disable
DAC1 Right Signal Enable
0
1
DAC1 Left Signal Disable
DAC1 Left Signal Enable
0
1
Input 4 Left Signal Disable
Input 4 Left Signal Enable
0
1
Input 3 Left Signal Disable
Input 3 Left Signal Enable
0
1
Input 2 Left Signal Disable
Input 2 Left Signal Enable
0
1
Input 1 Left Signal Disable
Input 1 Left Signal Enable
LLINE2MIX6
LLINE2MIX5
LLINE2MIX4
LLINE2MIX3
LLINE2MIX2
LLINE2MIX1
LLINE2MIX0
Rev. 0 | Page 115 of 296
Reset
0x0
Access
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
RLINE2MIX REGISTER
Address: 0x17, Reset: 0x00, Name: RLINE2MIX
Lineout 2 Right Mixer Control
Table 58. Bit Descriptions for RLINE2MIX
Bits
7
6
5
4
3
2
1
0
Bit Name
RLINE2MIX7
Settings
Description
0
1
DAC2 Right Signal Disable
DAC2 Right Signal Enable
0
1
DAC2 Left Signal Disable
DAC2 Left Signal Enable
0
1
DAC1 Right Signal Disable
DAC1 Right Signal Enable
0
1
DAC1 Left Signal Disable
DAC1 Left Signal Enable
0
1
Input 4 Right Signal Disable
Input 4 Right Signal Enable
0
1
Input 3 Right Signal Disable
Input 3 Right Signal Enable
0
1
Input 2 Right Signal Disable
Input 2 Right Signal Enable
0
1
Input 1 Right Signal Disable
Input 1 Right Signal Enable
RLINE2MIX6
RLINE2MIX5
RLINE2MIX4
RLINE2MIX3
RLINE2MIX2
RLINE2MIX1
RLINE2MIX0
Rev. 0 | Page 116 of 296
Reset
0x0
Access
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
LCDMIX (SPEAKER OUTPUT) REGISTER
Address: 0x18, Reset: 0x00, Name: LCDMIX
Speaker Out Left Mixer Control
Table 59. Bit Descriptions for LCDMIX
Bits
7
6
5
4
3
2
1
0
Bit Name
CDLMIX7
Settings
Description
0
1
DAC2 Right Signal Disable
DAC2 Right Signal Enable
0
1
DAC2 Left Signal Disable
DAC2 Left Signal Enable
0
1
DAC1 Right Signal Disable
DAC1 Right Signal Enable
0
1
DAC1 Left Signal Disable
DAC1 Left Signal Enable
0
1
Input 4 Left Signal Disable
Input 4 Left Signal Enable
0
1
Input 3 Left Signal Disable
Input 3 Left Signal Enable
0
1
Input 2 Left Signal Disable
Input 2 Left Signal Enable
0
1
Input 1 Left Signal Disable
Input 1 Left Signal Enable
CDLMIX6
CDLMIX5
CDLMIX4
CDLMIX3
CDLMIX2
CDLMIX1
CDLMIX0
Rev. 0 | Page 117 of 296
Reset
0x0
Access
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
RCDMIX (SPEAKER OUTPUT) REGISTER
Address: 0x19, Reset: 0x00, Name: RCDMIX
Speaker Out Right Mixer Control
Table 60. Bit Descriptions for RCDMIX
Bits
7
6
5
4
3
2
1
0
Bit Name
CDRMIX7
Settings
Description
0
1
DAC2 Right Signal Disable
DAC2 Right Signal Enable
0
1
DAC2 Left Signal Disable
DAC2 Left Signal Enable
0
1
DAC1 Right Signal Disable
DAC1 Right Signal Enable
0
1
DAC1 Left Signal Disable
DAC1 Left Signal Enable
0
1
Input 4 Right Signal Disable
Input 4 Right Signal Enable
0
1
Input 3 Right Signal Disable
Input 3 Right Signal Enable
0
1
Input 2 Right Signal Disable
Input 2 Right Signal Enable
0
1
Input 1 Right Signal Disable
Input 1 Right Signal Enable
CDRMIX6
CDRMIX5
CDRMIX4
CDRMIX3
CDRMIX2
CDRMIX1
CDRMIX0
Rev. 0 | Page 118 of 296
Reset
0x0
Access
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
LHPMIX REGISTER
Address: 0x1A, Reset: 0x00, Name: LHPMIX
Headphone Out Left Mixer Control
Table 61. Bit Descriptions for LHPMIX
Bits
7
6
5
4
3
2
1
0
Bit Name
LHPMIX7
Settings
Description
0
1
DAC2 Right Signal Disable
DAC2 Right Signal Enable
0
1
DAC2 Left Signal Disable
DAC2 Left Signal Enable
0
1
DAC1 Right Signal Disable
DAC1 Right Signal Enable
0
1
DAC1 Left Signal Disable
DAC1 Left Signal Enable
0
1
Input 4 Left Signal Disable
Input 4 Left Signal Enable
0
1
Input 3 Left Signal Disable
Input 3 Left Signal Enable
0
1
Input 2 Left Signal Disable
Input 2 Left Signal Enable
0
1
Input 1 Left Signal Disable
Input 1 Left Signal Enable
LHPMIX6
LHPMIX5
LHPMIX4
LHPMIX3
LHPMIX2
LHPMIX1
LHPMIX0
Rev. 0 | Page 119 of 296
Reset
0x0
Access
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
RHPMIX REGISTER
Address: 0x1B, Reset: 0x00, Name: RHPMIX
Headphone Out Right Mixer Control
Table 62. Bit Descriptions for RHPMIX
Bits
7
6
5
4
3
2
1
0
Bit Name
RHPMIX7
Settings
Description
0
1
DAC2 Right Signal Disable
DAC2 Right Signal Enable
0
1
DAC2 Left Signal Disable
DAC2 Left Signal Enable
0
1
DAC1 Right Signal Disable
DAC1 Right Signal Enable
0
1
DAC1 Left Signal Disable
DAC1 Left Signal Enable
0
1
Input 4 Right Signal Disable
Input 4 Right Signal Enable
0
1
Input 3 Right Signal Disable
Input 3 Right Signal Enable
0
1
Input 2 Right Signal Disable
Input 2 Right Signal Enable
0
1
Input 1 Right Signal Disable
Input 1 Right Signal Enable
RHPMIX6
RHPMIX5
RHPMIX4
RHPMIX3
RHPMIX2
RHPMIX1
RHPMIX0
Rev. 0 | Page 120 of 296
Reset
0x0
Access
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
EPMIX REGISTER
Address: 0x1C, Reset: 0x00, Name: EPMIX
Earpiece Out Mixer Control
Table 63. Bit Descriptions for EPMIX
Bits
7
6
5
4
3
2
1
0
Bit Name
EPMIX7
Settings
Description
0
1
DAC2 Right Signal Disable
DAC2 Right Signal Enable
0
1
DAC2 Left Signal Disable
DAC2 Left Signal Enable
0
1
DAC1 Right Signal Disable
DAC1 Right Signal Enable
0
1
DAC1 Left Signal Disable
DAC1 Left Signal Enable
0
1
Input 4 Signal Disable
Input 4 Signal Enable
0
1
Input 3 Signal Disable
Input 3 Signal Enable
0
1
Input 2 Signal Disable
Input 2 Signal Enable
0
1
Input 1 Signal Disable
Input 1 Signal Enable
EPMIX6
EPMIX5
EPMIX4
EPMIX3
EPMIX2
EPMIX1
EPMIX0
Rev. 0 | Page 121 of 296
Reset
0x0
Access
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
HP_CTRL REGISTER
Address: 0x1D, Reset: 0x00, Name: HP_CTRL
Headphone Amplifier Mode Control 1
Table 64. Bit Descriptions for HP_CTRL
Bits
[7:6]
[5:4]
Bit Name
RESERVED
POPTIME
Settings
00
01
10
11
[3:2]
HPMOD
00
01
10
11
[1:0]
HPOC
00
01
10
11
Description
Reserved.
Headphone Power-Up/Power-Down Time Control. Headphone amplifier
turn on time.
2 ms
4 ms
8 ms
16 ms
Headphone Operating Mode Control. Headphone amplifier mode setting.
Class-G mode (default)
High efficiency low output power
Low efficiency high output power
Reserved
Headphone Output Overcurrent Threshold. Headphone amplifier
overcurrent threshold setting.
200 mA (default)
250 mA
300 mA
350 mA
Rev. 0 | Page 122 of 296
Reset
0x0
0x0
Access
RW
RW
0x0
RW
0x0
RW
ADAU1373
HP_CTRL2 REGISTER
Address: 0x1E, Reset: 0x00, Name: HP_CTRL2
Headphone Amplifier Mode Control 2
Table 65. Bit Descriptions for HP_CTRL2
Bits
7
[6:5]
Bit Name
RESERVED
LVL_THR
Settings
00
01
10
11
4
HIZ
0
1
[3:1]
VOLIM
000
001
010
011
100
101
110
111
Description
Reserved.
Class-G Rail Switching Threshold.
300 mV (Default)
400 mV
500 mV
Reserved
Output Impedance Setting.
Disable (Default)
Enable
Voltage Limiter Threshold Enable.
VOUT = Disable
VOUT = 1.11 V
VOUT = 0.968 V
VOUT = 0.815 V
VOUT = 0.56 V
VOUT = 0.408 V
VOUT = 0.28 V
VOUT = 0.23 V
Rev. 0 | Page 123 of 296
Reset
0x0
0x0
Access
RW
RW
0x0
RW
0x0
RW
ADAU1373
LS_CTRL (SPEAKER) REGISTER
Address: 0x1F, Reset: 0x00, Name: LS_CTRL
Speaker Amplifier Mode Control
Table 66. Bit Descriptions for LS_CTRL
Bits
7
Bit Name
CDDRIVE
Settings
0
1
6
DIRCD
0
1
[5:4]
CDSM
00
01
10
11
3
RCDBST
0
1
2
LCDBST
0
1
[1:0]
EDGE
00
01
10
11
Description
Class-D Mono Mode.
Disable (default)
Enable
DAC to Class-D Direct Path Enable. DAC direct couple to Class-D
enable/disable control.
Disable (default)
Enable
Class-D Output Mode.
Mute
Left Channel (L + R)
Right Channel (L + R)
Stereo Mode
Speaker Output Right Channel Volume Control.
12 dB (default)
18 dB
Speaker Output Left Channel Volume Control.
12 dB (default)
18 dB
Class-D Output Slew Rate Control.
Normal mode
Slow edge
Slow edge (for SPKVDD = 3.0 V)
Slow edge (for SPKVDD = 4.0 V)
Rev. 0 | Page 124 of 296
Reset
0x0
Access
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
EPCONTROL REGISTER
Address: 0x21, Reset: 0x00, Name: EPCONTROL
Earpiece Amplifier and Microphone Bias Output Control
Table 67. Bit Descriptions for EPCONTROL
Bits
[7:6]
[5:4]
Bit Name
RESERVED
MICB2GAIN
Settings
00
01
10
11
[3:2]
MICB1GAIN
00
01
10
11
[1:0]
EPGAIN
00
01
10
11
Description
Reserved.
Microphone Bias 2 Output Voltage Setting.
2.9 V (default)
2.2 V
2.6 V
1.8 V
Microphone Bias 1 Output Voltage Setting.
2.9 V (default)
2.2 V
2.6 V
1.8 V
Earpiece Amplifier Gain Setting.
Mute (default)
0 dB
6 dB
12 dB
Rev. 0 | Page 125 of 296
Reset
0x0
0x0
Access
RW
RW
0x0
RW
0x0
RW
ADAU1373
MICBIAS_CTRL1 REGISTER
Address: 0x22, Reset: 0x00, Name: MICBIAS_CTRL1
Microphone Bias 1 Control
Table 68. Bit Descriptions for MICBIAS_CTRL1
Bits
7
Bit Name
VBATLOW
Settings
0
1
6
MICB1LIM
0
1
5
MICB1OCEN
0
1
4
MICB1CURDEN
0
1
[3:2]
MICB1SHT
00
01
10
11
[1:0]
MICB1CURD
00
01
10
11
Description
Low Battery Sense Threshold Setting.
Disable (VBAT > 3 V)
Enable (VBAT ≤ 3 V)
Microphone Bias 1 Current Limit Enable/Disable Control.
Disable (default)
Enable
Microphone Bias 1 Overcurrent Detection Enable/disable Control.
Disable (default)
Enable
Microphone Bias 1 Current Detection Enable/Disable Control.
Disable (default)
Enable
Microphone Bias 1 Overcurrent Threshold Value.
330 μA (default)
700 μA
1000 μA
1400 μA
Microphone Bias 1 Current Detection Threshold Value.
150 μA (default)
330 μA
510 μA
700 μA
Rev. 0 | Page 126 of 296
Reset
0x0
Access
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
MICBIAS_CTRL2 REGISTER
Address: 0x23, Reset: 0x00, Name: MICBIAS_CTRL2
Microphone Bias 2 Control
Table 69. Bit Descriptions for MICBIAS_CTRL2
Bits
7
6
Bit Name
RESERVED
MICB2LIM
Settings
0
1
5
MICB2OCEN
0
1
4
MICB2CURDEN
0
1
[3:2]
MICB2SHT
00
01
10
11
[1:0]
MICB2CURD
00
01
10
11
Description
Reserved.
Microphone Bias 2 Current Limit Enable/Disable Control.
Disable (default)
Enable
Microphone Bias 2 Overcurrent Detect Enable/Disable Control.
Disable (default)
Enable
Microphone Bias 2 Current Detect Enable/Disable Control.
Disable (default)
Enable
Microphone Bias 2 Overcurrent Detect Threshold Select.
330 μA (default)
700 μA
1000 μA
1400 μA
Microphone Bias 2 Current Detect Threshold Select.
150 μA (default)
330 μA
510 μA
700 μA
Rev. 0 | Page 127 of 296
Reset
0x0
0x0
Access
RW
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
OUTPUT_CONTROL (LINE) REGISTER
Address: 0x24, Reset: 0x00, Name: OUTPUT_CONTROL
Line Output Mode Control
Table 70. Bit Descriptions for OUTPUT_CONTROL
Bits
[7:6]
Bit Name
RNSM
Settings
00
01
10
11
[5:4]
LNSM
00
01
10
11
3
LDIFF
0
1
2
LNFBEN
0
1
1
ZCTO
0
1
0
VMID
0
1
Description
Line Output 2 Mono Stereo Control.
Lineout 2 Mute (Default)
Lineout 2 Mono L + R in Left Output
Lineout 2 Mono L + R in Right Output
Lineout 2 Stereo
Line Output 1 Mono Stereo Control.
Lineout 1 Mute (Default)
Lineout 1 Mono L + R in Left Output
Lineout 1 Mono L + R in Right Output
Lineout 1 Stereo
Line Output Mode Control.
Lineout Single-Ended (Unbalanced)
Lineout Differential
Line Output Ground Sense Control.
Disable (Default)
Enable
Volume Change Timeout Control.
32 ms
64 ms
Reference Voltage Mode.
AVDD/2
0.8 V Fix Voltage Mode
Rev. 0 | Page 128 of 296
Reset
0x0
Access
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
PWDN_CTRL1 REGISTER
Address: 0x25, Reset: 0x00, Name: PWDN_CTRL1
Power-Down Block Control 1
Table 71. Bit Descriptions for PWDN_CTRL1
Bits
7
Bit Name
LADCPDB
Settings
0
1
6
RADCPDB
0
1
5
MICB2PDB
0
1
4
MICB1PDB
0
1
3
AIN4PDB
0
1
2
AIN3PDB
0
1
1
AIN2PDB
0
1
0
AIN1PDB
0
1
Description
Right Channel ADC Power-Down Control.
Power down (default)
Power up
Left Channel ADC Power-Down Control.
Power down (default)
Power up
Microphone Bias 2 Power-Down Control.
Power down (default)
Power up
Microphone Bias 1 Power-Down Control.
Power down (default)
Power up
Analog Input 4 Power-Down Control.
Power down (default)
Power up
Analog Input 3 Power-Down Control.
Power down (default)
Power up
Analog Input 2 Power-Down Control.
Power down (default)
Power up
Analog Input 1 Power-Down Control.
Power down (default)
Power up
Rev. 0 | Page 129 of 296
Reset
0x0
Access
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
PWDN_CTRL2 REGISTER
Address: 0x26, Reset: 0x00, Name: PWDN_CTRL2
Power-Down Block Control 2
Table 72. Bit Descriptions for PWDN_CTRL2
Bits
7
Bit Name
LDAC2PDB
Settings
0
1
6
RADC2PDB
0
1
5
LDAC1PDB
0
1
4
RDAC1PDB
0
1
3
LLN2PDB
0
1
2
RLN2PDB
0
1
1
LLN1PDB
0
1
0
RLN1PDB
0
1
Description
Left Channel DAC 2 Power-Down Control.
Power down (default)
Power up
Right Channel DAC 2 Power-Down Control.
Power down (default)
Power up
Left Channel DAC1 Power-Down Control.
Power down (default)
Power up
Right Channel DAC1 Power-Down Control.
Power down (default)
Power up
Lineout2 Left Power-Down Control.
Power down (default)
Power up
Lineout2 Right Power-Down Control.
Power down (default)
Power up
Lineout1 Left Power-Down Control.
Power down (default)
Power up
Lineout1 Right Power-Down Control.
Power down (default)
Power up
Rev. 0 | Page 130 of 296
Reset
0x0
Access
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
PWDN_CTRL3 REGISTER
Address: 0x27, Reset: 0x00, Name: PWDN_CTRL3
Power-Down Block Control 3
Table 73. Bit Descriptions for PWDN_CTRL3
Bits
7
6
Bit Name
ZDPDB
VBATPWDB
Settings
0
1
5
4
RESERVED
EPPDB
0
1
3
LCDPDB
0
1
2
RCDPDB
0
1
1
HPPDB
0
1
0
PWDB
0
1
Description
Zero Cross Detection Power-Down Control.
VBAT Power-Down Control.
Power down (default)
Power up
Reserved.
Earpiece Amplifier Power Control.
Power down (default)
Power up
Speaker Amplifier Right Power Control.
Power down (default)
Power up
Speaker Amplifier Left Power Control.
Power down (default)
Power up
Headphone Power Control.
Power down (default)
Power up
Low Voltage Power-Down Control.
Power down (default)
Power up
Rev. 0 | Page 131 of 296
Reset
0x0
0x0
Access
RW
RW
0x0
0x0
RW
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
DPLLA_CTRL REGISTER
Address: 0x28, Reset: 0x00, Name: DPLLA_CTRL
DPLLA Control
Table 74. Bit Descriptions for DPLLA_CTRL
Bits
[7:4]
Bit Name
DPLLA_REF_SEL
Settings
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1110
1111
1101
1100
Description
DPLLA Source Select. DPLLA source selection can be set to one of the
following: Digital Audio Interface A/B/C bit clock/frame clock or
GPIO1/2/3/4 or Master Clock Input 1/2.
MCLK1
DPLLA reference clock input: Digital Audio Interface A bit clock
DPLLA reference clock input: Digital Audio Interface B bit clock
DPLLA reference clock input: Digital Audio Interface C bit clock
DPLLA reference clock input: Digital Audio Interface A frame clock
DPLLA reference clock input: Digital Audio Interface B frame clock
DPLLA reference clock input: Digital Audio Interface C frame clock
DPLLA reference clock input: GPIO1
DPLLA reference clock input: GPIO2
DPLLA reference clock input: GPIO3
DPLLA reference clock input: GPIO4
MCLK2
Reserved
Reserved
Reserved
Reserved
Rev. 0 | Page 132 of 296
Reset
0x0
Access
RW
ADAU1373
Bits
[3:0]
Bit Name
DPLLA_NDIV
Settings
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1100
1101
1110
1111
1011
Description
DPLLA Clock Divider Setting. DPLLA clock divider settings from 1 to 1024
in 16 steps.
DPLLA output clock frequency: DPLLA input
DPLLA output clock frequency: DPLLA input clock frequency × 1024
DPLLA output clock frequency: DPLLA input clock frequency × 512
DPLLA output clock frequency: DPLLA input clock frequency × 256
DPLLA output clock frequency: DPLLA input clock frequency × 128
DPLLA output clock frequency: DPLLA input clock frequency × 64
DPLLA output clock frequency: DPLLA input clock frequency × 32
DPLLA output clock frequency: DPLLA input clock frequency × 16
DPLLA output clock frequency: DPLLA input clock frequency × 8
DPLLA output clock frequency: DPLLA input clock frequency × 4
DPLLA output clock frequency: DPLLA input clock frequency × 2
Reserved
Reserved
Reserved
Reserved
Reserved
Reset
0x0
Access
RW
Reset
0x00
Access
RW
Reset
0x00
Access
RW
PLLA_CTRL1 REGISTER
Address: 0x29, Reset: 0x00, Name: PLLA_CTRL1
PLLA Fractional Mode Denominator M High Byte
Table 75. Bit Descriptions for PLLA_CTRL1
Bits
[7:0]
Bit Name
PLLA_M_HI
Settings
Description
Denominator (M) of the Fractional PLLA Upper Byte. PLLA Fractional Mode
Denominator M divider setting upper byte.
PLLA_CTRL2 REGISTER
Address: 0x2A, Reset: 0x00, Name: PLLA_CTRL2
PLLA Fractional Mode Denominator M Lower Byte
Table 76. Bit Descriptions for PLLA_CTRL2
Bits
[7:0]
Bit Name
PLLA_M_LO
Settings
Description
Denominator (M) of the Fractional PLLA Lower Byte. PLLA Fractional Mode
Denominator M divider setting lower byte.
Rev. 0 | Page 133 of 296
ADAU1373
PLLA_CTRL3 REGISTER
Address: 0x2B, Reset: 0x00, Name: PLLA_CTRL3
PLLA Fractional Mode N
Table 77. Bit Descriptions for PLLA_CTRL3
Bits
[7:0]
Bit Name
PLLA_N_HI
Settings
Description
Numerator (N) of the Fractional PLLA Upper Byte. PLLA Fractional Mode
Numerator N upper byte.
Reset
0x00
Access
RW
Reset
0x00
Access
RW
PLLA_CTRL4 REGISTER
Address: 0x2C, Reset: 0x00, Name: PLLA_CTRL4
Numerator (N) of the Fractional PLLA Lower Byte
Table 78. Bit Descriptions for PLLA_CTRL4
Bits
[7:0]
Bit Name
PLLA_N_LO
Settings
Description
Numerator (N) of the Fractional PLLA Lower Byte. PLLA Fractional Mode
Numerator N lower byte.
Rev. 0 | Page 134 of 296
ADAU1373
PLLA_CTRL5 REGISTER
Address: 0x2D, Reset: 0x00, Name: PLLA_CTRL5
PLLA Type, X and R Value Setting
Table 79. Bit Descriptions for PLLA_CTRL5
Bits
7
[6:3]
Bit Name
RESERVED
PLLA_R
Settings
0010
0011
0100
0101
0110
0111
1000
[2:1]
PLLA_X
00
01
10
11
0
PLLA_TYPE
0
1
Description
Reserved.
Integer Part of PLLA. Integer (R) of PLLA.
R=2
R=3
R=4
R=5
R=6
R=7
R=8
PLLA Input Clock Divider. PLLA input clock divider (X).
X=1
X=2
X=3
X=4
PLLA Operation Mode. PLLA mode (fractional or integer).
Integer
Fractional
Rev. 0 | Page 135 of 296
Reset
0x0
0x0
Access
RW
RW
0x0
RW
0x0
RW
ADAU1373
PLLA_CTRL6 REGISTER
Address: 0x2E, Reset: 0x02, Name: PLLA_CTRL6
PLLA Control/Status
Table 80. Bit Descriptions for PLLA_CTRL6
Bits
[7:4]
3
Bit Name
RESERVED
DPLLA_LOCKED
Settings
1
0
2
PLLA_LOCKED
1
0
1
DPLLA_BYPASS
0
1
0
PLLA_EN
0
1
Description
Reserved.
DPLLA Lock Indicator. DPLLA lock status indicator.
Digital PLLA locked
Digital PLLA unlocked
PLLA Lock Indicator. PLLA lock status indicator.
Analog PLLA locked
Analog PLLA unlocked
DPLLA Bypass. DPLLA bypass select.
DPLL in PLLA not bypassed
DPLL in PLLA bypassed
PLLA Enable Setting. PLLA enable/disable control.
PLLA disable
PLLA enable
Rev. 0 | Page 136 of 296
Reset
0x0
0x0
Access
RW
R
0x0
R
0x1
RW
0x0
RW
ADAU1373
DPLLB_CTRL REGISTER
Address: 0x2F, Reset: 0x00, Name: DPLLB_CTRL
DPLLB Control
Table 81. Bit Descriptions for DPLLB_CTRL
Bits
[7:4]
Bit Name
DPLLB_REF_SEL
Settings
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
Description
DPLLB Source Select. DPLLB clock divider settings from 1 to 1024 in
16 steps.
MCLK1
Audio Interface A bit clock
Audio Interface B bit clock
Audio Interface C bit clock
Audio Interface A Frame Clock
Audio Interface B Frame Clock
Audio Interface C Frame Clock
GPIO1
GPIO2
GPIO3
GPIO4
MCLK2
Reserved
Reserved
Reserved
Reserved
Rev. 0 | Page 137 of 296
Reset
0x0
Access
RW
ADAU1373
Bits
[3:0]
Bit Name
DPLLB_NDIV
Settings
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
Description
DPLLB Clock Divider Setting. DPLLB source selection can be set to one of
the following: Digital Audio Interface A/B/C bit clock/frame clock or
GPIO1/2/3/4 or Master Clock Input 1/2.
DPLLB output clock frequency: DPLLB input
DPLLB output clock frequency: DPLLB input clock frequency × 1024
DPLLB output clock frequency: DPLLB input clock frequency × 512
DPLLB output clock frequency: DPLLB input clock frequency × 256
DPLLB output clock frequency: DPLLB input clock frequency × 128
DPLLB output clock frequency: DPLLB input clock frequency × 64
DPLLB output clock frequency: DPLLB input clock frequency × 32
DPLLB output clock frequency: DPLLB input clock frequency × 16
DPLLB output clock frequency: DPLLB input clock frequency × 8
DPLLB output clock frequency: DPLLB input clock frequency × 4
DPLLB output clock frequency: DPLLB input clock frequency × 2
Reserved
Reserved
Reserved
Reserved
Reserved
Rev. 0 | Page 138 of 296
Reset
0x0
Access
RW
ADAU1373
PLLB_CTRL1 REGISTER
Address: 0x30, Reset: 0x00, Name: PLLB_CTRL1
PLLB Fractional Mode Denominator M High Byte
Table 82. Bit Descriptions for PLLB_CTRL1
Bits
[7:0]
Bit Name
PLLB_M_HI
Settings
Description
Denominator of the Fractional PLLB MSB. PLLB Fractional Mode
Denominator M upper byte.
Reset
0x00
Access
RW
Reset
0x00
Access
RW
Reset
0x00
Access
RW
PLLB CTRL2 REGISTER
Address: 0x31, Reset: 0x00, Name: PLLB_CTRL2
PLLB Fractional Mode Denominator M Lower Byte
Table 83. Bit Descriptions for PLLB_CTRL2
Bits
[7:0]
Bit Name
PLLB_M_LO
Settings
Description
Denominator of the Fractional PLLB LSB. PLLB Fractional Mode
Denominator M lower byte.
PLLB_CTRL3 REGISTER
Address: 0x32, Reset: 0x00, Name: PLLB_CTRL3
PLLB Fractional Mode N
Table 84. Bit Descriptions for PLLB_CTRL3
Bits
[7:0]
Bit Name
PLLB_N_HI
Settings
Description
Numerator of the fractional PLLB. PLLB Fractional Mode Numerator N
upper byte.
Rev. 0 | Page 139 of 296
ADAU1373
PLLB_CTRL4 REGISTER
Address: 0x33, Reset: 0x00, Name: PLLB_CTRL4
Numerator (N) of the Fractional PLLB Lower Byte
Table 85. Bit Descriptions for PLLB_CTRL4
Bits
[7:0]
Bit Name
PLLB_N_LO
Settings
Description
Numerator of the Fractional PLLB LSB. PLLB Fractional Mode Numerator N
lower byte.
Reset
0x00
Access
RW
Reset
0x0
0x0
Access
RW
RW
0x0
RW
0x0
RW
PLLB_CTRL5 REGISTER
Address: 0x34, Reset: 0x00, Name: PLLB_CTRL5
PLLB Type, X and R Value Setting
Table 86. Bit Descriptions for PLLB_CTRL5
Bits
7
[6:3]
Bit Name
RESERVED
PLLB_R
Settings
Description
0010
0011
0100
0101
0110
0111
1000
[2:1]
PLLB_X
00
01
10
11
0
PLLB_TYPE
0
1
Integer Part of PLLB. Integer (R) of PLLB.
R=2
R=3
R=4
R=5
R=6
R=7
R=8
PLLB Input Clock Divider. PLLB input clock divider (X).
X=1
X=2
X=3
X=4
PLLB Operation Mode. PLLB mode (fractional or integer).
Integer
Fractional
Rev. 0 | Page 140 of 296
ADAU1373
PLLB_CTRL6 REGISTER
Address: 0x35, Reset: 0x02, Name: PLLB_CTRL6
PLLB Control/Status
Table 87. Bit Descriptions for PLLB_CTRL6
Bits
[7:4]
3
Bit Name
RESERVED
DPLLB_LOCKED
Settings
1
0
2
PLLB_LOCKED
1
0
1
DPLLB_BYPASS
0
1
0
PLLB_EN
0
1
Description
Reserved.
DPLLB Lock Indicator. DPLLB lock status indicator.
Digital PLL in PLLB locked
Digital PLL in PLLB unlocked
PLLB Lock Indicator. PLLB lock status indicator.
Analog PLL in PLLB locked
Analog PLL in PLLB unlocked
DPLLB Bypass. DPLLB bypass select.
DPLL in PLLB not bypassed
DPLL in PLLB bypassed
PLLB Enable Setting. PLLB enable/disable control.
PLLB disable
PLLB enable
Rev. 0 | Page 141 of 296
Reset
0x0
0x0
Access
RW
R
0x0
R
0x1
RW
0x0
RW
ADAU1373
HEADDECT REGISTER
Address: 0x36, Reset: 0x00, Name: HEADDECT
Headphone Jack Detect Function Control.
Every write to these bits toggles the HP_CFG_RAW_STATE bit (Bit 2) in Register 0xE6.
Table 88. Bit Descriptions for HEADDECT
Bits
[7:2]
[1:0]
Bit Name
RESERVED
HEADSET
Settings
00
10
11
01
Description
Reserved.
Headphone Detect. Headphone jack detect function control.
HP = no change, SPK = no change (JACKDET pin = 0/1)
HP = no change, SPK = power down (JACKDET pin = 0) or HP = power down,
SPK = no change (JACKDET pin = 1)
HP = no change, SPK = no change (JACKDET pin = 0) or HP = power down,
SPK = power down (JACKDET pin = 1)
HP = no change, SPK = no change (JACKDET pin = 0/1)
Rev. 0 | Page 142 of 296
Reset
0x0
0x0
Access
RW
RW
ADAU1373
ADC_DAC_STATUS REGISTER
Address: 0x37, Reset: 0x00, Name: ADC_DAC_STATUS
ADC/DAC Status
Table 89. Bit Descriptions for ADC_DAC_STATUS
Bits
7
6
Bit Name
RESERVED
NOCLKDAC2
Settings
0
1
5
NOCLKDAC1
0
1
[4:1]
0
RESERVED
NOCLKADC
0
1
Description
Reserved.
Clock Status DAC2.
Normal
DAC2 clock loss
Clock Status DAC1.
Normal
DAC1 clock loss
Reserved.
Clock Status ADC.
Normal
ADC clock loss
Rev. 0 | Page 143 of 296
Reset
0x0
0x0
Access
R
R
0x0
R
0x0
0x0
R
R
ADAU1373
MIC_JACK_STATUS REGISTER
Address: 0x38, Reset: 0x00, Name: MIC_JACK_STATUS
Microphone/Jack Status
Table 90. Bit Descriptions for MIC_JACK_STATUS
Bits
[7:5]
4
3
2
1
0
Bit Name
RESERVED
JACKDECT
Settings
Description
Reserved.
0
1
No jack insertion detected
Jack insertion detected
0
1
Microphone Bias 2 current normal
Microphone Bias 2 overcurrent detected
0
1
Microphone Bias 2 current not detected
Microphone Bias 2 current detected
0
1
Microphone Bias 1 current normal
Microphone Bias 1 overcurrent detected
MICB2OC
MICB2THS
MICB1OC
MICB1THS
0
1
Microphone Bias 1 current not detected
Microphone Bias 1 current detected
Rev. 0 | Page 144 of 296
Reset
0x0
0x0
Access
R
R
0x0
R
0x0
R
0x0
R
0x0
R
ADAU1373
CHIP_FAULT_STATUS REGISTER
Address: 0x39, Reset: 0x00, Name: CHIP_FAULT_STATUS
Chip Status
Table 91. Bit Descriptions for CHIP_FAULT_STATUS
Bits
[7:5]
4
Bit Name
RESERVED
OCEP
Settings
0
1
3
OCCDR
0
1
2
OCCDL
0
1
1
OCHP
0
1
0
OT
0
1
Description
Reserved.
Overcurrent for Earpiece. Earpiece amplifier overcurrent indicator.
No overcurrent
Overcurrent
Overcurrent for Left Channel Class-D Speaker. Speaker amplifier left
channel overcurrent indicator.
No overcurrent
Overcurrent
Overcurrent for Right Channel Class-D Speaker. Speaker amplifier right
channel overcurrent indicator.
No overcurrent
Overcurrent
Overcurrent for Headphone. Headphone amplifier overcurrent indicator.
No overcurrent
Overcurrent
Die Overtemperature Signal. Junction overtemperature indicator.
Die temperature < 150°C
Die temperature > 150°C
Rev. 0 | Page 145 of 296
Reset
0x0
0x0
Access
R
R
0x0
R
0x0
R
0x0
R
0x0
R
ADAU1373
ADC_SETTING REGISTER
Address: 0x3C, Reset: 0x00, Name: ADC_SETTING
Table 92. Bit Descriptions for ADC_SETTING
Bits
[7:3]
2
1
0
Bit Name
RESERVED
ADC_RESET_FORCE
Settings
Description
0
1
ADC reset force disable (default)
ADC reset force enable
0
1
No reset (default)
Reset
0
1
Peak detection disable (default)
Peak detection enable
ADC_RESET
PDETECT
Rev. 0 | Page 146 of 296
Reset
0x00
0x0
Access
RW
RW
0x0
RW
0x0
RW
ADAU1373
CLK1_SOURCE_DIV REGISTER
Address: 0x40, Reset: 0x00, Name: CLK1_SOURCE_DIV
Clock 1 Divide and Core Clock Enable Control
Table 93. Bit Descriptions for CLK1_SOURCE_DIV
Bits
7
Bit Name
COREN
Settings
0
1
6
CLK1S_SEL
0
1
[5:3]
CLK1SDIV
000
001
010
011
100
101
110
111
[2:0]
MCLK1DIV
000
001
010
011
100
101
110
111
Description
Core Clock Enable. Core clock enable or disable control.
Core clock disable (default)
Core clock enable
PLLA Bypass Signal. Clock source selection. Clock source can be set to
either PLLA output or external input.
Use PLLA clock as Source Clock 1 (default)
Use external clock as Source Clock 1
Source Clock 1 Divider. Source Clock 1 divider settings, 0 through 7 in
eight steps.
Source Clock Divider K = 0
Source Clock Divider K = 1
Source Clock Divider K = 2
Source Clock Divider K = 3
Source Clock Divider K = 4
Source Clock Divider K = 5
Source Clock Divider K = 6
Source Clock Divider K = 7
Master Clock 1 Divider. Master Clock 1 divider settings, 0 through 7 in
eight steps.
Divider J = 0
Divider J = 1
Divider J = 2
Divider J = 3
Divider J = 4
Divider J = 5
Divider J = 6
Divider J = 7
Rev. 0 | Page 147 of 296
Reset
0x0
Access
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
CLK1_OUTPUT_DIV REGISTER
Address: 0x41, Reset: 0x00, Name: CLK1_OUTPUT_DIV
Master Clock 1 Output Divider Control for PLLA
Table 94. Bit Descriptions for CLK1_OUTPUT_DIV
Bits
[7:6]
5
Bit Name
RESERVED
CLK1OEN
Settings
0
1
[4:0]
CLK1ODIV
00000
00001
00010
00011
00100
00101
00110
00111
01000
01001
01010
Description
Reserved.
CLK1 Output Enable. Output clock enable control.
CLK1 output disable (default)
CLK1 output enable
Output Clock 1 Divider. Output clock divider, settings 0 through 31.
Output Clock Divider P = 0
Output Clock Divider P = 1
Output Clock Divider P = 2
Output Clock Divider P = 3
Output Clock Divider P = 4
Output Clock Divider P = 5
Output Clock Divider P = 6
Output Clock Divider P = 7
Output Clock Divider P = 8
Output Clock Divider P = 9
Output Clock Divider P = 10
Rev. 0 | Page 148 of 296
Reset
0x0
0x0
Access
RW
RW
0x00
RW
ADAU1373
Bits
[4:0]
Bit Name
CLK1ODIV
Settings
01011
01100
01101
01110
01111
10000
10001
10010
10011
10100
10101
10110
10111
11000
11001
11010
11011
11100
11101
11110
11111
Description
Output Clock Divider P = 11
Output Clock Divider P = 12
Output Clock Divider P = 13
Output Clock Divider P = 14
Output Clock Divider P = 15
Output Clock Divider P = 16
Output Clock Divider P = 17
Output Clock Divider P = 18
Output Clock Divider P = 19
Output Clock Divider P = 20
Output Clock Divider P = 21
Output Clock Divider P = 22
Output Clock Divider P = 23
Output Clock Divider P = 24
Output Clock Divider P = 25
Output Clock Divider P = 26
Output Clock Divider P = 27
Output Clock Divider P = 28
Output Clock Divider P = 29
Output Clock Divider P = 30
Output Clock Divider P = 31
Rev. 0 | Page 149 of 296
Reset
Access
ADAU1373
CLK2_SOURCE_DIV REGISTER
Address: 0x42, Reset: 0x00, Name: CLK2_SOURCE_DIV
Clock 2 Divide and Core Clock Enable Control
Table 95. Bit Descriptions for CLK2_SOURCE_DIV
Bits
7
Bit Name
CLK2EN
Settings
0
1
6
CLK2S_SEL
0
1
[5:3]
CLK2SDIV
000
001
010
011
100
101
110
111
[2:0]
MCLK2DIV
000
001
010
011
100
101
110
111
Description
Clock 2 Enable. Core clock enable or disable control.
Clock 2 disable (default)
Clock 2 enable
PLLB Bypass Signal. Clock source selection. Clock source can be set to
either PLLB output or external input.
Use PLLB clock as Source Clock 2 (default)
Use external clock as Source Clock 2
Source Clock 2 Divider. Source Clock 2 divider settings, 0 through 7 in
eight steps.
Source Clock Divider K = 0
Source Clock Divider K = 1
Source Clock Divider K = 2
Source Clock Divider K = 3
Source Clock Divider K = 4
Source Clock Divider K = 5
Source Clock Divider K = 6
Source Clock Divider K = 7
Master Clock 2 Divider. Master Clock 2 divider settings, 0 through 7 in
eight steps.
Divider J = 0
Divider J = 1
Divider J = 2
Divider J = 3
Divider J = 4
Divider J = 5
Divider J = 6
Divider J = 7
Rev. 0 | Page 150 of 296
Reset
0x0
Access
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
CLK2_OUTPUT_DIV REGISTER
Address: 0x43, Reset: 0x00, Name: CLK2_OUTPUT_DIV
Master Clock 2 Output Divider Control for PLLB
Table 96. Bit Descriptions for CLK2_OUTPUT_DIV
Bits
[7:6]
5
Bit Name
RESERVED
CLK2OEN
Settings
0
1
[4:0]
CLK2ODIV
00000
00001
00010
00011
00100
00101
00110
00111
01000
01001
01010
Description
Reserved.
CLK2 Output Enable. Output clock enable control.
CLK2 output disable (default)
CLK2 output enable
Output Clock 2 Divider. Output clock divider settings, 0 through 31.
Output Clock Divider P = 0
Output Clock Divider P = 1
Output Clock Divider P = 2
Output Clock Divider P = 3
Output Clock Divider P = 4
Output Clock Divider P = 5
Output Clock Divider P = 6
Output Clock Divider P = 7
Output Clock Divider P = 8
Output Clock Divider P = 9
Output Clock Divider P = 10
Rev. 0 | Page 151 of 296
Reset
0x0
0x0
Access
RW
RW
0x00
RW
ADAU1373
Bits
Bit Name
Settings
01011
01100
01101
01110
01111
10000
10001
10010
10011
10100
10101
10110
10111
11000
11001
11010
11011
11100
11101
11110
11111
Description
Output Clock Divider P = 11
Output Clock Divider P = 12
Output Clock Divider P = 13
Output Clock Divider P = 14
Output Clock Divider P = 15
Output Clock Divider P = 16
Output Clock Divider P = 17
Output Clock Divider P = 18
Output Clock Divider P = 19
Output Clock Divider P = 20
Output Clock Divider P = 21
Output Clock Divider P = 22
Output Clock Divider P = 23
Output Clock Divider P = 24
Output Clock Divider P = 25
Output Clock Divider P = 26
Output Clock Divider P = 27
Output Clock Divider P = 28
Output Clock Divider P = 29
Output Clock Divider P = 30
Output Clock Divider P = 31
Rev. 0 | Page 152 of 296
Reset
Access
ADAU1373
DAIA REGISTER
Address: 0x44, Reset: 0x0A, Name: DAIA
Digital Audio Interface A Settings 1
Table 97. Bit Descriptions for DAIA
Bits
7
Bit Name
BCLKINVA
Settings
0
1
6
MSA
0
1
5
SWAPA
0
1
4
LRPA
0
1
[3:2]
WLA
00
01
10
11
[1:0]
FORMATA
00
01
10
11
Description
BCLK Inversion Control. Bit clock polarity inversion setting.
BCLK not inverted (default)
BCLK inverted
Master Mode Enable. Digital Audio Interface A master/slave setting.
Enable slave mode (default)
Enable master mode
Swap Audio Interface Data Control. Left/right channel data swap setting.
Output left- and right-channel data as normal (default)
Swap left- and right-channel DAC data in audio interface
Polarity Control for Clocks in Right-Justified, Left-Justified, and I2S Modes.
Polarity invert setting for frame clock.
Normal DACLRC and ADCLRC (default)
Invert DACLRC and ADCLRC polarity
Data-Word Length Control. Digital Audio Interface A data-word length
setting: 16/20/24/32 bits.
16 bits
20 bits
24 bits (default)
32 bits
Digital Audio Interface A Format Control. Digital Audio Interface A serial
format setting RJ/LJ/I2S/DSP mode.
Right justified
Left justified
I2S format (default)
DSP mode
Rev. 0 | Page 153 of 296
Reset
0x0
Access
RW
0x0
RW
0x0
RW
0x0
RW
0x2
RW
0x2
RW
ADAU1373
DAIB REGISTER
Address: 0x45, Reset: 0x0A, Name: DAIB
Digital Audio Interface B Settings 1
Table 98. Bit Descriptions for DAIB
Bits
7
Bit Name
BCLKINVB
Settings
0
1
6
MSB
0
1
5
SWAPB
0
1
4
LRPB
0
1
[3:2]
WLB
00
01
10
11
[1:0]
FORMATB
00
01
10
11
Description
BCLK Inversion Control. Bit clock polarity inversion setting.
BCLK not inverted (default)
BCLK inverted
Master Mode Enable. Digital Audio Interface B master/slave setting.
Enable slave mode (default)
Enable master mode
Swap Audio Interface Data Control. Left/right channel data swap setting.
Output left- and right-channel data as normal (default)
Swap left- and right-channel DAC data in audio interface
Polarity Control for Clocks in Right-Justified, Left-Justified, and I2S Modes.
Polarity invert setting for frame clock.
Normal DACLRC and ADCLRC (default)
Invert DACLRC and ADCLRC polarity
Data-Word Length Control. Digital Audio Interface B data-word length
setting: 16/20/24/32 bits.
16 bits
20 bits
24 bits (default)
32 bits
Digital Audio Interface B Format Control. Digital Audio Interface B serial
format setting RJ/LJ/I2S/DSP mode.
Right justified
Left justified
I2S format (default)
DSP mode
Rev. 0 | Page 154 of 296
Reset
0x0
Access
RW
0x0
RW
0x0
RW
0x0
RW
0x2
RW
0x2
RW
ADAU1373
DAIC REGISTER
Address: 0x46, Reset: 0x0A, Name: DAIC
Digital Audio Interface C Settings 1
Table 99. Bit Descriptions for DAIC
Bits
7
Bit Name
BCLKINVC
Settings
0
1
6
MSC
0
1
5
SWAPC
0
1
4
LRPC
0
1
[3:2]
WLC
00
01
10
11
[1:0]
FORMATC
00
01
10
11
Description
BCLK Inversion Control. Bit clock polarity inversion setting.
BCLK not inverted (default)
BCLK inverted
Master Mode Enable. Digital Audio Interface C master/slave setting.
Enable slave mode (default)
Enable master mode
Swap Audio Interface Data Control. Left/right channel data swap setting.
Output left- and right-channel data as normal (default)
Swap left- and right-channel DAC data in audio interface
Polarity Control for Clocks in Right-Justified, Left-Justified, and I2S Modes.
Polarity invert setting for frame clock.
Normal DACLRC and ADCLRC (default)
Invert DACLRC and ADCLRC polarity
Data-Word Length Control. Digital Audio Interface C data-word length
setting: 16/20/24/32 bits.
16 bits
20 bits
24 bits (default)
32 bits
Digital Audio Interface C Format Control. Digital Audio Interface C serial
format setting RJ/LJ/I2S/DSP mode.
Right justified
Left justified
I2S format (default)
DSP mode
Rev. 0 | Page 155 of 296
Reset
0x0
Access
RW
0x0
RW
0x0
RW
0x0
RW
0x2
RW
0x2
RW
ADAU1373
BCLKDIVA REGISTER
Address: 0x47, Reset: 0x00, Name: BCLKDIVA
Digital Audio Interface A Settings 2
Table 100. Bit Descriptions for BCLKDIVA
Bits
[7:6]
5
Bit Name
RESERVED
DAIA_SOURCE
Settings
0
1
[4:2]
DAIA_SR
000
001
010
011
100
101
110
111
[1:0]
BPFA
00
01
10
11
Description
Reserved.
Source Clock of the Digital Audio Interface A in Master Mode. Master clock
source for Interface A can be set to either PLLA or PLLB.
From PLLA
From PLLB
Sample Rate of Digital Audio Interface A. Sample rate for Interface A can
be set to 32 kHz/24 kHz/16 kHz/12 kHz/8 kHz/8.0182 kHz.
fS (48 kHz)
2/3 fS (32 kHz)
1/2 fS (24 kHz)
1/3 fS (16 kHz)
1/4 fS (12 kHz)
1/6 fS (8 kHz)
2/11 fS (44.1K based, 8.0182 kHz)
fS
Number of Bit Clocks per Frame of Digital Audio Interface A. Number of
bit clocks per frame can be set to 32/64/128/256.
256
128
64
32
Rev. 0 | Page 156 of 296
Reset
0x0
0x0
Access
RW
RW
0x0
RW
0x0
RW
ADAU1373
BCLKDIVB REGISTER
Address: 0x48, Reset: 0x00, Name: BCLKDIVB
Digital Audio Interface B Settings 2
Table 101. Bit Descriptions for BCLKDIVB
Bits
[7:6]
5
Bit Name
RESERVED
DAIB_SOURCE
Settings
0
1
[4:2]
DAIB_SR
000
001
010
011
100
101
110
111
[1:0]
BPFB
00
01
10
11
Description
Reserved.
Source Clock of the Digital Audio Interface B in Master Mode. Master clock
source for Interface B can be set to either PLLA or PLLB.
From PLLA
From PLLB
Sample Rate of Digital Audio Interface B. Sample rate for Interface B can
be set to 32 kHz/24 kHz/16 kHz/12 kHz/8 kHz/8.0182 kHz.
fS (48 kHz)
2/3 fS (32 kHz)
1/2 fS (24 kHz)
1/3 fS (16 kHz)
1/4 fS (12 kHz)
1/6 fS (8 kHz)
2/11 fS (44.1K based, 8.0182 kHz)
fS
Number of Bit Clocks per Frame of Digital Audio Interface B. Number of bit
clocks per frame can be set to 32/64/128/256.
256
128
64
32
Rev. 0 | Page 157 of 296
Reset
0x0
0x0
Access
RW
RW
0x0
RW
0x0
RW
ADAU1373
BCLKDIVC REGISTER
Address: 0x49, Reset: 0x00, Name: BCLKDIVC
Digital Audio Interface C Settings 2
Table 102. Bit Descriptions for BCLKDIVC
Bits
[7:6]
5
Bit Name
RESERVED
DAIC_SOURCE
Settings
0
1
[4:2]
DAIC_SR
000
001
010
011
100
101
110
111
[1:0]
BPFC
00
01
10
11
Description
Reserved.
Source Clock of Digital Audio Interface C in Master Mode. Master clock
source for Interface C can be set to either PLLA or PLLB.
From PLLA
From PLLB
Sample Rate of Digital Audio Interface C. Sample rate for Interface C can
be set to 32 kHz/24 kHz/16 kHz/12 kHz/8 kHz/8.0182 kHz.
fS (48 kHz)
2/3 fS (32 kHz)
1/2 fS (24 kHz)
1/3 fS (16 kHz)
1/4 fS (12 kHz)
1/6 fS (8 kHz)
2/11 fS (44.1K based, 8.0182 kHz)
fS
Number of Bit Clocks per Frame of Digital Audio Interface C. Number of
bit clocks per frame can be set to 32/64/128/256.
256
128
64
32
Rev. 0 | Page 158 of 296
Reset
0x0
0x0
Access
RW
RW
0x0
RW
0x0
RW
ADAU1373
SRCA_RATIOA REGISTER
Address: 0x4A, Reset: 0x00, Name: SRCA_RATIOA
Sample Rate Converter A Setting
Table 103. Bit Descriptions for SRCA_RATIOA
Bits
7
Bit Name
SRCAMODE
Settings
0
1
[6:4]
[3:0]
SRCAINT
SRCARFRE_HI
Description
SRCA Working Mode. SRCA ratio can be set to autodetect or manual
mode. In manual mode the SRC ratio must be set using SRCAINT,
SRCARFRE_HI, and SRCARFRE_LOW bits. The format is 3.12.
Enable ASRCA ratio autodetect; the data is automatically written in the
SRCA INT/FRAC ratio register (default)
Disable ASRCA ratio autodetect, using the data set in the SRCA INT/FRAC
ratio register
Integer Part of the SRCA Ratio Setting.
Upper Four Bits for the SRCA Ratio Setting.
Reset
0x0
Access
RW
0x0
0x0
RW
RW
Reset
0x00
Access
RW
SRCA_RATIOB REGISTER
Address: 0x4B, Reset: 0x00, Name: SRCA_RATIOB
Sample Rate Converter A Setting
Table 104. Bit Descriptions for SRCA_RATIOB
Bits
[7:0]
Bit Name
SRCARFRE_LOW
Settings
Description
Lower Byte for the SRCA Ratio Setting.
Rev. 0 | Page 159 of 296
ADAU1373
SRCB_RATIOA REGISTER
Address: 0x4C, Reset: 0x00, Name: SRCB_RATIOA
Sample Rate Converter B Setting
Table 105. Bit Descriptions for SRCB_RATIOA
Bits
7
Bit Name
SRCBMODE
Settings
0
1
[6:4]
[3:0]
SRCBINT
SRCBRFRE_HI
Description
SRCB Working Mode. SRCB ratio can be set to autodetect or manual mode.
In manual mode the SRC ratio needs to be set using SRCBINT,
SRCBRFRE_HI, and SRCBRFRE_LOW bits. The format is 3.12.
Enable ASRCB ratio autodetect; the data is automatically written in the
SRCB INT/FRAC ratio register (default)
Disable ASRCB ratio autodetect, using the data set in the SRCB INT/FRAC
ratio register
Integer Part of the SRCB Ratio Setting.
Upper Four Bits for the SRCB Ratio Setting.
Reset
0x0
Access
RW
0x0
0x0
RW
RW
Reset
0x00
Access
RW
SRCB_RATIOB REGISTER
Address: 0x4D, Reset: 0x00, Name: SRCB_RATIOB
Sample Rate Converter B Setting
Table 106. Bit Descriptions for SRCB_RATIOB
Bits
[7:0]
Bit Name
SRCBRFRE_LOW
Settings
Description
Lower Byte for the SRCB Ratio Setting.
Rev. 0 | Page 160 of 296
ADAU1373
SRCC_RATIOA REGISTER
Address: 0x4E, Reset: 0x00, Name: SRCC_RATIOA
Sample Rate Converter C Setting
Table 107. Bit Descriptions for SRCC_RATIOA
Bits
7
Bit Name
SRCCMODE
Settings
0
1
[6:4]
[3:0]
SRCCINT
SRCCRFRE_HI
Description
SRCC Working Mode. SRCC ratio can be set to autodetect or manual
mode. In manual mode, the SRCC ratio needs to be set using SRCCINT,
SRCCRFRE_HI, and SRCCRFRE_LOW bits. The format is 3.12.
Enable ASRCC ratio autodetect; the data is automatically written in the
SRCC INT/FRAC ratio register (default)
Disable ASRCC ratio autodetect, using the data set in the SRCC INT/FRAC
ratio register
Integer Part of the SRCC Ratio Setting.
Upper Four Bits for the SRCC Ratio Setting.
Reset
0x0
Access
RW
0x0
0x0
RW
RW
Reset
0x00
Access
RW
SRCC_RATIOB REGISTER
Address: 0x4F, Reset: 0x00, Name: SRCC_RATIOB
Sample Rate Converter C Setting
Table 108. Bit Descriptions for SRCC_RATIOB
Bits
[7:0]
Bit Name
SRCCRFRE_LOW
Settings
Description
Lower Byte for the SRCC Ratio Setting.
Rev. 0 | Page 161 of 296
ADAU1373
DEEMP_CTRL REGISTER
Address: 0x50, Reset: 0x00, Name: DEEMP_CTRL
De-Emphasis Enable/Disable Control for Digital Audio Interface A/B/C
Table 109. Bit Descriptions for DEEMP_CTRL
Bits
[7:5]
[4:3]
Bit Name
RESERVED
DEMPFS
Settings
00
01
10
11
2
DEMPCEN
0
1
1
DEMPBEN
0
1
0
DEMPAEN
0
1
Description
Reserved.
De-Emphasis FS Select.
Bypass
48 kHz
44.1 kHz
32 kHz
Enable De-Emphasis for AIFC. Digital Audio Interface C de-emphasis
enable/disable.
De-emphasis on AIFC input disable
De-emphasis on AIFC input enable
Enable De-Emphasis for AIFB. Digital Audio Interface B de-emphasis
enable/disable.
De-emphasis on AIFB input disable
De-emphasis on AIFB input enable
Enable De-Emphasis for AIFA. Digital Audio Interface A de-emphasis
enable/disable.
De-emphasis on AIFA input disable
De-emphasis on AIFA input enable
Rev. 0 | Page 162 of 296
Reset
0x0
0x0
Access
RW
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
SRC_DAI_A_CTRL REGISTER
Address: 0x51, Reset: 0x08, Name: SRC_DAI_A_CTRL
SRCA and Digital Audio Interface A Control
Table 110. Bit Descriptions for SRC_DAI_A_CTRL
Bits
[7:6]
5
Bit Name
RESERVED
SRCA_RECWRONG
Settings
0
1
4
SRCA_PBWRONG
0
1
3
SRCAUNLOCK
1
0
2
SRCAPBEN
0
1
1
SRCARECEN
0
1
0
DAIAEN
0
1
Description
Reserved.
SRCA Record Wrong. SRCA record status bit.
Not wrong (default)
Wrong
SRCA Playback Wrong. SRCA playback status bit.
Not wrong (default)
Wrong
SRCA Unlock. SRCA lock status bit.
Not locked (default)
Locked
Playback Channel SRCA Enable. Playback path SRCA enable/disable
control.
Disable (default)
Enable
Recording channel SRCA Enable. Record path SRCA enable/disable
control.
Disable (default)
Enable
Digital Audio Interface A Enable. Digital Audio Interface A enable/disable
control.
Disable (default)
Enable
Rev. 0 | Page 163 of 296
Reset
0x0
0x0
Access
RW
R
0x0
R
0x1
R
0x0
RW
0x0
RW
0x0
RW
ADAU1373
SRC_DAI_B_CTRL REGISTER
Address: 0x52, Reset: 0x08, Name: SRC_DAI_B_CTRL
SRCB and Digital Audio Interface B Control
Table 111. Bit Descriptions for SRC_DAI_B_CTRL
Bits
[7:6]
5
Bit Name
RESERVED
SRCB_RECWRONG
Settings
0
1
4
SRCB_PBWRONG
0
1
3
SRCBUNLOCK
1
0
2
SRCBPBEN
0
1
1
SRCBRECEN
0
1
0
DAIBEN
0
1
Description
Reserved.
SRCB Record Wrong. SRCB record status bit.
Not wrong (default)
Wrong
SRCB Playback Wrong. SRCB playback status bit.
Not wrong (default)
Wrong
SRCB Unlock. SRCB lock status bit.
Not lock (default)
Locked
Playback Channel SRCB Enable. Playback path SRCB enable/disable
control.
Disable (default)
Enable
Recording Channel SRCB Enable. Record path SRCB enable/disable
control.
Disable (default)
Enable
Digital Audio Interface B Enable. Digital Audio Interface B enable/disable
control.
Disable (default)
Enable
Rev. 0 | Page 164 of 296
Reset
0x0
0x0
Access
RW
R
0x0
R
0x1
R
0x0
RW
0x0
RW
0x0
RW
ADAU1373
SRC_DAI_C_CTRL REGISTER
Address: 0x53, Reset: 0x08, Name: SRC_DAI_C_CTRL
SRCC and Digital Audio Interface C Control
Table 112. Bit Descriptions for SRC_DAI_C_CTRL
Bits
[7:6]
5
Bit Name
RESERVED
SRCC_RECWRONG
Settings
0
1
4
SRCC_PBWRONG
0
1
3
SRCCUNLOCK
1
0
2
SRCCPBEN
0
1
1
SRCCRECEN
0
1
0
DAICEN
0
1
Description
Reserved.
SRCC Record Wrong. SRCC record status bit.
Not wrong (default)
Wrong
SRCC Playback Wrong. SRCC playback status bit.
Not wrong (default)
Wrong
SRCC Unlock. SRCC lock status bit.
Not lock (default)
Locked
Playback Channel SRCC Enable. Playback path SRCC enable/disable
control.
Disable (default)
Enable
Recording Channel SRCC Enable. Record path SRCC enable/disable
control.
Disable (default)
Enable
Digital Audio Interface C Enable. Digital Audio Interface C enable/disable
control.
Disable (default)
Enable
Rev. 0 | Page 165 of 296
Reset
0x0
0x0
Access
RW
R
0x0
R
0x1
R
0x0
RW
0x0
RW
0x0
RW
ADAU1373
DIN_MIX_CTRL0 (TO FDSP CHANNEL 0 INPUT) REGISTER
Address: 0x56, Reset: 0x00, Name: DIN_MIX_CTRL0
DSP Input Mixer Control Channel 0
Table 113. Bit Descriptions for DIN_MIX_CTRL0
Bits
7
6
Bit Name
RESERVED
DIN_CHAN0_DMIC_SWAP
Settings
0
1
5
DIN_CHAN0_DMIC
0
1
4
DIN_CHAN0_ADC_SWAP
0
1
3
DIN_CHAN0_ADC
0
1
2
DIN_CHAN0_AIFC_PB
0
1
1
DIN_CHAN0_AIFB_PB
0
1
0
DIN_CHAN0_AIFA_PB
0
1
Description
Reserved.
DIN Channel 0 Select (DMIC Recording Channel Output, Left Channel/Right
Channel Swap). DSP data in Channel 0: DMIC (left/right swapped) select.
Not select
Select
DIN Channel 0 Select (DMIC Recording Channel Output). DSP data in
Channel 0: DMIC select.
Not select
Select
DIN Channel 0 Select (Codec Recording Channel Output, Left Channel/
Right Channel Swap). DSP data in Channel 0: ADC select.
Not select
Select
DIN Channel 0 Select (Codec Recording Channel Output). DSP data in
Channel 0: ADC (left/right swapped) select.
Not select
Select
DIN Channel 0 Select (Audio Interface C Playback Input). DSP data in
Channel 0: Audio Interface C input select.
Not select
Select
DIN Channel 0 Select (Audio Interface B Playback Input). DSP data in
Channel 0: Audio Interface B input select.
Not select
Select
DIN Channel 0 Select (Audio Interface A Playback Input). DSP data in
Channel 0: Audio Interface A input select.
Not select
Select
Rev. 0 | Page 166 of 296
Reset
0x0
0x0
Access
RW
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
DIN_MIX_CTRL1 (TO FDSP CHANNEL 1 INPUT) REGISTER
Address: 0x57, Reset: 0x00, Name: DIN_MIX_CTRL1
DSP Input Mixer Control Channel 1
Table 114. Bit Descriptions for DIN_MIX_CTRL1
Bits
7
6
Bit Name
RESERVED
DIN_CHAN1_DMIC_SWAP
Settings
0
1
5
DIN_CHAN1_DMIC
0
1
4
DIN_CHAN1_ADC_SWAP
0
1
3
DIN_CHAN1_ADC
0
1
2
DIN_CHAN1_AIFC_PB
0
1
1
DIN_CHAN1_AIFB_PB
0
1
0
DIN_CHAN1_AIFA_PB
0
1
Description
Reserved.
DIN Channel 1 Select (DMIC Recording Channel Output, Left Channel/Right
Channel Swap). DSP data in Channel 1: DMIC (left/right swapped) select.
Not select
Select
DIN Channel 1 Select (DMIC Recording Channel Output). DSP data in
Channel 1: DMIC select.
Not select
Select
DIN Channel 1 Select (Codec Recording Channel Output, Left Channel/
Right Channel Swap). DSP data in Channel 1: ADC select.
Not select
Select
DIN Channel 1 Select (Codec Recording Channel Output). DSP data in
Channel 1: ADC (left/right swapped) select.
Not select
Select
DIN Channel 1 Select (Audio Interface C Playback Input). DSP data in
Channel 1: Audio Interface C input select.
Not select
Select
DIN Channel 1 Select (Audio Interface B Playback Input). DSP data in
Channel 1: Audio Interface B input select.
Not select
Select
DIN Channel 1 Select (Audio Interface A Playback Input). DSP data in
Channel 1: Audio Interface A input select.
Not select
Select
Rev. 0 | Page 167 of 296
Reset
0x0
0x0
Access
RW
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
DIN_MIX_CTRL2 (TO FDSP CHANNEL 2 INPUT) REGISTER
Address: 0x58, Reset: 0x00, Name: DIN_MIX_CTRL2
DSP Input Mixer Control Channel 2
Table 115. Bit Descriptions for DIN_MIX_CTRL2
Bits
7
6
Bit Name
RESERVED
DIN_CHAN2_DMIC_SWAP
Settings
0
1
5
DIN_CHAN2_DMIC
0
1
4
DIN_CHAN2_ADC_SWAP
0
1
3
DIN_CHAN2_ADC
0
1
2
DIN_CHAN2_AIFC_PB
0
1
1
DIN_CHAN2_AIFB_PB
0
1
0
DIN_CHAN2_AIFA_PB
0
1
Description
Reserved.
DIN Channel 2 Select (DMIC Recording Channel Output, Left Channel/Right
Channel Swap). DSP data in Channel 2: DMIC (left/right swapped) select.
Not select
Select
DIN Channel 2 Select (DMIC Recording Channel Output). DSP data in
Channel 2: DMIC select.
Not select
Select
DIN Channel 2 Select (Codec Recording Channel Output, Left Channel/
Right Channel Swap). DSP data in Channel 2: ADC select.
Not select
Select
DIN Channel 2 Select (Codec Recording Channel Output). DSP data in
Channel 2: ADC (left/right swapped) select.
Not select
Select
DIN Channel 2 Select (Audio Interface C Playback Input). DSP data in
Channel 2: Audio Interface C input select.
Not select
Select
DIN Channel 2 Select (Audio Interface B Playback Input). DSP data in
Channel 2: Audio Interface B input select.
Not select
Select
DIN Channel 2 Select (Audio Interface A Playback Input). DSP data in
Channel 2: Audio Interface A input select.
Not select
Select
Rev. 0 | Page 168 of 296
Reset
0x0
0x0
Access
RW
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
DIN_MIX_CTRL3 (TO FDSP CHANNEL 3 INPUT) REGISTER
Address: 0x59, Reset: 0x00, Name: DIN_MIX_CTRL3
DSP Input Mixer Control Channel 3
Table 116. Bit Descriptions for DIN_MIX_CTRL3
Bits
7
6
Bit Name
RESERVED
DIN_CHAN3_DMIC_SWAP
Settings
0
1
5
DIN_CHAN3_DMIC
0
1
4
DIN_CHAN3_ADC_SWAP
0
1
3
DIN_CHAN3_ADC
0
1
2
DIN_CHAN3_AIFC_PB
0
1
1
DIN_CHAN3_AIFB_PB
0
1
0
DIN_CHAN3_AIFA_PB
0
1
Description
Reserved.
DIN Channel 3 Select (DMIC Recording Channel Output, Left
Channel/Right Channel Swap). DSP data in Channel 3: DMIC
(left/right swapped) select.
Not select
Select
DIN Channel 3 Select (DMIC Recording Channel Output). DSP data
in Channel 3: DMIC Select.
Not select
Select
DIN Channel 3 Select (Codec Recording Channel Output, Left
Channel/Right Channel Swap). DSP data in Channel 3: ADC select.
Not select
Select
DIN Channel 3 Select (Codec Recording Channel Output). DSP data
in Channel 3: ADC (left/right swapped) select.
Not select
Select
DIN Channel 3 Select (Audio Interface C Playback Input). DSP data
in Channel 3: Audio Interface C input select.
Not select
Select
DIN Channel 3 Select (Audio Interface B Playback Input). DSP data
in Channel 3: Audio Interface B input select.
Not select
Select
DIN Channel 3 Select (Audio Interface A Playback Input). DSP data
in Channel 3: Audio Interface A input select.
Not select
Select
Rev. 0 | Page 169 of 296
Reset
0x0
0x0
Access
RW
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
DIN_MIX_CTRL4 (TO FDSP CHANNEL 4 INPUT) REGISTER
Address: 0x5A, Reset: 0x00, Name: DIN_MIX_CTRL4
DSP Input Mixer Control Channel 4
Table 117. Bit Descriptions for DIN_MIX_CTRL4
Bits
7
6
Bit Name
RESERVED
DIN_CHAN4_DMIC_SWAP
Settings
0
1
5
DIN_CHAN4_DMIC
0
1
4
DIN_CHAN4_ADC_SWAP
0
1
3
DIN_CHAN4_ADC
0
1
2
DIN_CHAN4_AIFC_PB
0
1
1
DIN_CHAN4_AIFB_PB
0
1
0
DIN_CHAN4_AIFA_PB
0
1
Description
Reserved.
DIN Channel 4 Select (DMIC Recording Channel Output, Left Channel/Right
Channel Swap). DSP data in Channel 4: DMIC (left/right swapped) select.
Not select
Select
DIN Channel 4 Select (DMIC Recording Channel Output). DSP data in
Channel 4: DMIC select.
Not select
Select
DIN Channel 4 Select (Codec Recording Channel Output, Left
Channel/Right Channel Swap). DSP data in Channel 4: ADC select.
Not select
Select
DIN Channel 4 Select (Codec Recording Channel Output). DSP data in
Channel 3: ADC (left/right swapped) select.
Not select
Select
DIN Channel 4 Select (Audio Interface C Playback Input). DSP data in
Channel 4: Audio Interface C input select.
Not select
Select
DIN Channel 4 Select (Audio Interface B Playback Input). DSP data in
Channel 4: Audio Interface B input select.
Not select
Select
DIN Channel 4 Select (Audio Interface A Playback Input). DSP data in
Channel 4: Audio Interface A input select.
Not select
Select
Rev. 0 | Page 170 of 296
Reset
0x0
0x0
Access
RW
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
DOUT_MIX_CTRL0 (TO DIGITAL AUDIO INTERFACE A RECORDING OUTPUT) REGISTER
Address: 0x5B, Reset: 0x00, Name: DOUT_MIX_CTRL0
DSP Output Mix Control Interface A
Table 118. Bit Descriptions for DOUT_MIX_CTRL0
Bits
[7:5]
4
Bit Name
RESERVED
DOUT_CHAN4_AIFA_REC
Settings
0
1
3
DOUT_CHAN3_AIFA_REC
0
1
2
DOUT_CHAN2_AIFA_REC
0
1
1
DOUT_CHAN1_AIFA_REC
0
1
0
DOUT_CHAN0_AIFA_REC
0
1
Description
Reserved.
FDSP Channel 4 Output to Digital Audio Interface A. DSP output
Channel 4 to Digital Audio Interface A enable/disable.
Not select
Select
FDSP Channel 3 Output to Digital Audio Interface A. DSP output
Channel 3 to Digital Audio Interface A enable/disable.
Not select
Select
FDSP Channel 2 Output to Digital Audio Interface A. DSP output
Channel 2 to Digital Audio Interface A enable/disable.
Not select
Select
FDSP Channel 1 Output to Digital Audio Interface A. DSP output
Channel 1 to Digital Audio Interface A enable/disable.
Not select
Select
FDSP Channel 0 Output to Digital Audio Interface A. DSP output
Channel 0 to Digital Audio Interface A enable/disable.
Not select
Select
Rev. 0 | Page 171 of 296
Reset
0x0
0x0
Access
RW
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
DOUT_MIX_CTRL1 (TO DIGITAL AUDIO INTERFACE B RECORDING OUTPUT) REGISTER
Address: 0x5C, Reset: 0x00, Name: DOUT_MIX_CTRL1
DSP Output Mix Control Interface B
Table 119. Bit Descriptions for DOUT_MIX_CTRL1
Bits
[7:5]
4
Bit Name
RESERVED
DOUT_CHAN4_AIFB_REC
Settings
0
1
3
DOUT_CHAN3_AIFB_REC
0
1
2
DOUT_CHAN2_AIFB_REC
0
1
1
DOUT_CHAN1_AIFB_REC
0
1
0
DOUT_CHAN0_AIFB_REC
0
1
Description
Reserved.
FDSP Channel 4 Output to Digital Audio Interface B. DSP output
Channel 4 to Digital Audio Interface B enable/disable.
Not select
Select
FDSP Channel 3 Output to Digital Audio Interface B. DSP output
Channel 3 to Digital Audio Interface B enable/disable.
Not select
Select
FDSP Channel 2 Output to Digital Audio Interface B. DSP output
Channel 2 to Digital Audio Interface B enable/disable.
Not select
Select
FDSP Channel 1 Output to Digital Audio Interface B. DSP output
Channel 1 to Digital Audio Interface B enable/disable.
Not select
Select
FDSP Channel 0 Output to Digital Audio Interface B. DSP output
Channel 0 to Digital Audio Interface B enable/disable.
Not select
Select
Rev. 0 | Page 172 of 296
Reset
0x0
0x0
Access
RW
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
DOUT_MIX_CTRL2 (TO DIGITAL AUDIO INTERFACE C RECORDING OUTPUT) REGISTER
Address: 0x5D, Reset: 0x00, Name: DOUT_MIX_CTRL2
DSP Output Mix Control Interface C
Table 120. Bit Descriptions for DOUT_MIX_CTRL2
Bits
[7:5]
4
Bit Name
RESERVED
DOUT_CHAN4_AIFC_REC
Settings
0
1
3
DOUT_CHAN3_AIFC_REC
0
1
2
DOUT_CHAN2_AIFC_REC
0
1
1
DOUT_CHAN1_AIFC_REC
0
1
0
DOUT_CHAN0_AIFC_REC
0
1
Description
Reserved.
FDSP Channel 4 Output to Digital Audio Interface C. DSP output
Channel 4 to Digital Audio Interface C enable/disable.
Not select
Select
FDSP Channel 3 Output to Digital Audio Interface C. DSP output
Channel 3 to Digital Audio Interface C enable/disable.
Not select
Select
FDSP Channel 2 Output to Digital Audio Interface C. DSP output
Channel 2 to Digital Audio Interface C enable/disable.
Not select
Select
FDSP Channel 1 Output to Digital Audio Interface C. DSP output
Channel 1 to Digital Audio Interface C enable/disable.
Not select
Select
FDSP Channel 0 Output to Digital Audio Interface C. DSP output
Channel 0 to Digital Audio Interface C enable/disable.
Not select
Select
Rev. 0 | Page 173 of 296
Reset
0x0
0x0
Access
RW
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
DOUT_MIX_CTRL3 (TO DAC1 PLAYBACK INPUT) REGISTER
Address: 0x5E, Reset: 0x00, Name: DOUT_MIX_CTRL3
DSP Output Mix Control DAC1
Table 121. Bit Descriptions for DOUT_MIX_CTRL3
Bits
[7:5]
4
Bit Name
RESERVED
DOUT_CHAN4_DAC1
Settings
0
1
3
DOUT_CHAN3_DAC1
0
1
2
DOUT_CHAN2_DAC1
0
1
1
DOUT_CHAN1_DAC1
0
1
0
DOUT_CHAN0_DAC1
0
1
Description
Reserved.
FDSP Channel 4 Output to DAC1. DSP output Channel 4 to DAC1
enable/disable.
Not select
Select
FDSP Channel 3 Output to DAC1. DSP output Channel 3 to DAC1
enable/disable.
Not select
Select
FDSP Channel 2 Output to DAC1. DSP output Channel 2 to DAC1
enable/disable.
Not select
Select
FDSP Channel 1 Output to DAC1. DSP output Channel 1 to DAC1
enable/disable.
Not select
Select
FDSP Channel 0 Output to DAC1. DSP output Channel 0 to DAC1
enable/disable.
Not select
Select
Rev. 0 | Page 174 of 296
Reset
0x0
0x0
Access
RW
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
DOUT_MIX_CTRL4 (TO DAC2 PLAYBACK INPUT) REGISTER
Address: 0x5F, Reset: 0x00, Name: DOUT_MIX_CTRL4
DSP Output Mix Control DAC2
Table 122. Bit Descriptions for DOUT_MIX_CTRL4
Bits
[7:5]
4
Bit Name
RESERVED
DOUT_CHAN4_DAC2
Settings
0
1
3
DOUT_CHAN3_DAC2
0
1
2
DOUT_CHAN2_DAC2
0
1
1
DOUT_CHAN1_DAC2
0
1
0
DOUT_CHAN0_DAC2
0
1
Description
Reserved.
FDSP Channel 4 Output to DAC2. DSP output Channel 4 to DAC2
enable/disable.
Not select
Select
FDSP Channel 3 Output to DAC2. DSP output Channel 3 to DAC2
enable/disable.
Not select
Select
FDSP Channel 2 Output to DAC2. DSP output Channel 2 to DAC2
enable/disable.
Not select
Select
FDSP Channel 1 Output to DAC2. DSP output Channel 1 to DAC2
enable/disable.
Not select
Select
FDSP Channel 0 Output to DAC2. DSP output Channel 0 to DAC2
enable/disable.
Not select
Select
Rev. 0 | Page 175 of 296
Reset
0x0
0x0
Access
RW
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
VOLMOD1 REGISTER
Address: 0x60, Reset: 0x00, Name: VOLMOD1
Digital Volume Change Selection Either Soft or Hard (Forced)
Table 123. Bit Descriptions for VOLMOD1
Bits
[7:6]
5
Bit Name
RESERVED
DAICRECVOLM
Settings
0
1
4
DAIBRECVOLM
0
1
3
DAIARECVOLM
0
1
2
DAICPBVOLM
0
1
1
DAIBPBVOLM
0
1
0
DAIAPBVOLM
0
1
Description
Reserved.
Audio Interface C Recording Volume Control Work Mode. Audio Interface
C recording volume control update mode.
Soft (default)
Force
Audio Interface B Recording Volume Control Work Mode. Audio Interface
B recording volume control update mode.
Soft (default)
Force
Audio Interface A Recording Volume Control Work Mode. Audio Interface
A recording volume control update mode.
Soft (default)
Force
Audio Interface C Playback Volume Control Work Mode. Audio Interface C
playback volume control update mode.
Soft (default)
Force
Audio Interface B Playback Volume Control Work Mode. Audio Interface B
playback volume control update mode.
Soft (default)
Force
Audio Interface A Playback Volume Control Work Mode. Audio Interface A
playback volume control update mode.
Soft (default)
Force
Rev. 0 | Page 176 of 296
Reset
0x0
0x0
Access
RW
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
VOLMOD2 REGISTER
Address: 0x61, Reset: 0x00, Name: VOLMOD2
Digital Volume Change Selection, Either Soft or Hard (Forced)
Table 124. Bit Descriptions for VOLMOD2
Bits
[7:4]
3
Bit Name
RESERVED
CODECDRECVOLM
Settings
0
1
2
CODECRECVOLM
0
1
1
CODECPBBVOLM
0
1
0
CODECPBAVOLM
0
1
Description
Reserved.
Codec DMIC Recording Volume Control Work Mode. Digital microphone
playback volume control update mode.
Soft (default)
Force
Codec Recording Volume Control Work Mode. ADC recording volume
control update mode.
Soft (default)
Force
Codec Playback B Volume Control Work Mode. DAC2 playback volume
control update mode.
Soft (default)
Force
Codec Playback A Volume Control Work Mode. DAC1 playback volume
control update mode.
Soft (default)
Force
Rev. 0 | Page 177 of 296
Reset
0x0
0x0
Access
RW
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
DAIA_PBL_VOL REGISTER
Address: 0x62, Reset: 0x00, Name: DAIA_PBL_VOL
Digital Audio Interface A Left Channel Playback Volume Control
Table 125. Bit Descriptions for DAIA_PBL_VOL
Bits
[7:0]
Bit Name
DAIAPBLVOL
Settings
00000000
00000001
xxxxxxxx
11111111
Description
Digital Audio Interface A Playback Datapath Left Channel Volume.
Interface A left channel playback volume control.
0 dB
−0.375 dB
0.375 dB steps down to
−95.625 dB
Reset
0x00
Access
RW
Reset
0x00
Access
RW
DAIA_PBR_VOL REGISTER
Address: 0x63, Reset: 0x00, Name: DAIA_PBR_VOL
Digital Audio Interface A Right Channel Playback Volume Control
Table 126. Bit Descriptions for DAIA_PBR_VOL
Bits
[7:0]
Bit Name
DAIAPBRVOL
Settings
00000000
00000001
xxxxxxxx
11111111
Description
Digital Audio Interface A Playback Datapath Right Channel Volume.
Interface A right channel playback volume control.
0 dB (default)
−0.375 dB
0.375 dB steps down to
−95.625 dB
Rev. 0 | Page 178 of 296
ADAU1373
DAIB_PBL_VOL REGISTER
Address: 0x64, Reset: 0x00, Name: DAIB_PBL_VOL
Digital Audio Interface B Left Channel Playback Volume Control
Table 127. Bit Descriptions for DAIB_PBL_VOL
Bits
[7:0]
Bit Name
DAIBPBLVOL
Settings
00000000
00000001
xxxxxxxx
11111111
Description
Digital Audio Interface B Playback Datapath Left Channel Volume.
Interface B left channel playback volume control.
0 dB (default)
−0.375 dB
0.375 dB steps down to
−95.625 dB
Reset
0x00
Access
RW
Reset
0x00
Access
RW
DAIB_PBR_VOL REGISTER
Address: 0x65, Reset: 0x00, Name: DAIB_PBR_VOL
Digital Audio Interface B Right Channel Playback Volume Control
Table 128. Bit Descriptions for DAIB_PBR_VOL
Bits
[7:0]
Bit Name
DAIBPBRVOL
Settings
00000000
00000001
xxxxxxxx
11111111
Description
Digital Audio Interface B PB Datapath Right Channel Volume. Interface B
right channel playback volume control.
0 dB (default)
−0.375 dB
0.375 dB steps down to
−95.625 dB
Rev. 0 | Page 179 of 296
ADAU1373
DAIC_PBL_VOL REGISTER
Address: 0x66, Reset: 0x00, Name: DAIC_PBL_VOL
Digital Audio Interface C Left Channel Playback Volume Control
Table 129. Bit Descriptions for DAIC_PBL_VOL
Bits
[7:0]
Bit Name
DAICPBLVOL
Settings
00000000
00000001
xxxxxxxx
11111111
Description
Digital Audio Interface C Playback Datapath Left Channel Volume.
Interface C left channel playback volume control.
0 dB (default)
−0.375 dB
0.375 dB steps down to
−95.625 dB
Reset
0x00
Access
RW
Reset
0x00
Access
RW
DAIC_PBR_VOL REGISTER
Address: 0x67, Reset: 0x00, Name: DAIC_PBR_VOL
Digital Audio Interface C Right Channel Playback Volume Control
Table 130. Bit Descriptions for DAIC_PBR_VOL
Bits
[7:0]
Bit Name
DAICPBRVOL
Settings
00000000
00000001
xxxxxxxx
11111111
Description
Digital Audio Interface C Playback Datapath R Channel Volume. Interface
C right channel playback volume control.
0 dB (default)
−0.375 dB
0.375 dB steps down to
−95.625 dB
Rev. 0 | Page 180 of 296
ADAU1373
DAIA_RECL_VOL REGISTER
Address: 0x68, Reset: 0x00, Name: DAIA_RECL_VOL
Digital Audio Interface A Left Channel Recording Volume Control
Table 131. Bit Descriptions for DAIA_RECL_VOL
Bits
[7:0]
Bit Name
DAIARECLVOL
Settings
00000000
00000001
xxxxxxxx
11111111
Description
Digital Audio Interface A Record Datapath Left Channel Volume. Interface A
left channel recording volume control.
0 dB (default)
−0.375 dB
0.375 dB steps down to
−95.625 dB
Reset
0x00
Access
RW
Reset
0x00
Access
RW
DAIA_RECR_VOL REGISTER
Address: 0x69, Reset: 0x00, Name: DAIA_RECR_VOL
Digital Audio Interface A Right Channel Recording Volume Control
Table 132. Bit Descriptions for DAIA_RECR_VOL
Bits
[7:0]
Bit Name
DAIARECRVOL
Settings
00000000
00000001
xxxxxxxx
11111111
Description
Digital Audio Interface A Record Datapath Right Channel Volume.
Interface A right channel recording volume control.
0 dB (default)
−0.375 dB
0.375 dB steps down to
−95.625 dB
Rev. 0 | Page 181 of 296
ADAU1373
DAIB_RECL_VOL REGISTER
Address: 0x6A, Reset: 0x00, Name: DAIB_RECL_VOL
Digital Audio Interface B Left Channel Recording Volume Control
Table 133. Bit Descriptions for DAIB_RECL_VOL
Bits
[7:0]
Bit Name
DAIBRECLVOL
Settings
00000000
00000001
xxxxxxxx
11111111
Description
Digital Audio Interface B Record Datapath Left Channel Volume. Interface B
left channel recording volume control.
0 dB (default)
−0.375 dB
0.375 dB steps down to
−95.625 dB
Reset
0x00
Access
RW
Reset
0x00
Access
RW
DAIB_RECR_VOL REGISTER
Address: 0x6B, Reset: 0x00, Name: DAIB_RECR_VOL
Digital Audio Interface B Right Channel Recording Volume Control
Table 134. Bit Descriptions for DAIB_RECR_VOL
Bits
[7:0]
Bit Name
DAIBRECRVOL
Settings
00000000
00000001
xxxxxxxx
11111111
Description
Digital Audio Interface B Record Datapath Right Channel Volume.
Interface B right channel recording volume control.
0 dB (default)
−0.375 dB
0.375 dB steps down to
−95.625 dB
Rev. 0 | Page 182 of 296
ADAU1373
DAIC_RECL_VOL REGISTER
Address: 0x6C, Reset: 0x00, Name: DAIC_RECL_VOL
Digital Audio Interface C Left Channel Recording Volume Control
Table 135. Bit Descriptions for DAIC_RECL_VOL
Bits
[7:0]
Bit Name
DAICRECLVOL
Settings
00000000
00000001
xxxxxxxx
11111111
Description
Digital Audio Interface C Record Datapath Left Channel Volume. Interface C
left channel recording volume control.
0 dB (default)
−0.375 dB
0.375 dB steps down to
−95.625 dB
Reset
0x00
Access
RW
Reset
0x00
Access
RW
DAIC_RECR_VOL REGISTER
Address: 0x6D, Reset: 0x00, Name: DAIC_RECR_VOL
Digital Audio Interface C Right Channel Recording Volume Control
Table 136. Bit Descriptions for DAIC_RECR_VOL
Bits
[7:0]
Bit Name
DAICRECRVOL
Settings
00000000
00000001
xxxxxxxx
11111111
Description
Digital Audio Interface C Record Datapath Right Channel Volume.
Interface C right channel recording volume control.
0 dB (default)
−0.375 dB
0.375 dB steps down to
−95.625 dB
Rev. 0 | Page 183 of 296
ADAU1373
PBAL_VOL REGISTER
Address: 0x6E, Reset: 0x00, Name: PBAL_VOL
DAC1 Left Channel Playback Volume Control
Table 137. Bit Descriptions for PBAL_VOL
Bits
[7:0]
Bit Name
PBALVOL
Settings
00000000
00000001
xxxxxxxx
11111111
Description
Codec PBA Datapath Left Channel Volume. DAC1 left channel playback
volume control.
0 dB (default)
−0.375 dB
0.375 dB steps down to
−95.625 dB
Reset
0x00
Access
RW
Reset
0x00
Access
RW
PBAR_VOL REGISTER
Address: 0x6F, Reset: 0x00, Name: PBAR_VOL
DAC1 Right Channel Playback Volume Control
Table 138. Bit Descriptions for PBAR_VOL
Bits
[7:0]
Bit Name
PBARVOL
Settings
00000000
00000001
xxxxxxxx
11111111
Description
Codec PBA Datapath Right Channel Volume. DAC1 right channel playback
volume control.
0 dB (default)
−0.375 dB
0.375 dB steps down to
−95.625 dB
Rev. 0 | Page 184 of 296
ADAU1373
PBBL_VOL REGISTER
Address: 0x70, Reset: 0x00, Name: PBBL_VOL
DAC2 Left Channel Playback Volume Control
Table 139. Bit Descriptions for PBBL_VOL
Bits
[7:0]
Bit Name
PBBLVOL
Settings
00000000
00000001
xxxxxxxx
11111111
Description
Codec PBB Datapath Left Channel Volume. DAC2 left channel playback
volume control.
0 dB
−0.375 dB
0.375 dB steps down to
−95.625 dB
Reset
0x00
Access
RW
Reset
0x00
Access
RW
PBBR_VOL REGISTER
Address: 0x71, Reset: 0x00, Name: PBBR_VOL
DAC2 Right Channel Playback Volume Control
Table 140. Bit Descriptions for PBBR_VOL
Bits
[7:0]
Bit Name
PBBRVOL
Settings
00000000
00000001
xxxxxxxx
11111111
Description
Codec PBB Datapath Right Channel Volume. DAC2 right channel playback
volume control.
0 dB (default)
−0.375 dB
0.375 dB steps down to
−95.625 dB
Rev. 0 | Page 185 of 296
ADAU1373
RECL_VOL REGISTER
Address: 0x72, Reset: 0x00, Name: RECL_VOL
ADC Left Channel Recording Volume Control
Table 141. Bit Descriptions for RECL_VOL
Bits
[7:0]
Bit Name
RECLVOL
Settings
00000000
00000001
xxxxxxxx
11111111
Description
Codec Record Datapath Left Channel Volume. ADC left channel recording
volume control.
0 dB (default)
−0.375 dB
0.375 dB steps down to
−95.625 dB
Reset
0x00
Access
RW
Reset
0x00
Access
RW
RECR_VOL REGISTER
Address: 0x73, Reset: 0x00, Name: RECR_VOL
ADC Right Channel Recording Volume Control
Table 142. Bit Descriptions for RECR_VOL
Bits
[7:0]
Bit Name
RECRVOL
Settings
00000000
00000001
xxxxxxxx
11111111
Description
Codec Record Datapath Right Channel Volume. ADC right channel
recording volume control.
0 dB (default)
−0.375 dB
0.375 dB steps down to
−95.625 dB
Rev. 0 | Page 186 of 296
ADAU1373
DRECL_VOL REGISTER
Address: 0x74, Reset: 0x00, Name: DRECL_VOL
Digital Microphone Left Channel Recording Volume Control
Table 143. Bit Descriptions for DRECL_VOL
Bits
[7:0]
Bit Name
DRECLVOL
Settings
00000000
00000001
xxxxxxxx
11111111
Description
Codec DMIC Record Datapath Left Channel Volume. Digital microphone
left channel recording volume control.
0 dB (default)
−0.375 dB
0.375 dB steps down to
−95.625 dB
Reset
0x00
Access
RW
Reset
0x00
Access
RW
DRECR_VOL REGISTER
Address: 0x75, Reset: 0x00, Name: DRECR_VOL
Digital Microphone Right Channel Recording Volume Control
Table 144. Bit Descriptions for DRECR_VOL
Bits
[7:0]
Bit Name
DRECRVOL
Settings
00000000
00000001
xxxxxxxx
11111111
Description
Codec DMIC Record Datapath Right Channel Volume. Digital microphone
right channel recording volume control.
0 dB (default)
−0.375 dB
0.375 dB steps down to
−95.625 dB
Rev. 0 | Page 187 of 296
ADAU1373
VOL_GAIN1 (DAI PLAYBACK) REGISTER
Address: 0x76, Reset: 0x00, Name: VOL_GAIN1
Digital Audio Interface Playback Path Volume Control Gain
Table 145. Bit Descriptions for VOL_GAIN1
Bits
[7:6]
5
Bit Name
RESERVED
DAICPBRVOL_GAIN
Settings
0
1
4
DAICPBLVOL_GAIN
0
1
3
DAIBPBRVOL_GAIN
0
1
2
DAIBPBLVOL_GAIN
0
1
1
DAIAPBRVOL_GAIN
0
1
0
DAIAPBLVOL_GAIN
0
1
Description
Reserved.
Digital Audio Interface C Playback Datapath Right Channel Volume Gain.
Interface C right channel playback gain.
0 dB gain (default)
6 dB gain
Digital Audio Interface C Playback Datapath Left Channel Volume Gain.
Interface C left channel playback gain.
0 dB gain (default)
6 dB gain
Digital Audio Interface B Playback Datapath Right Channel Volume Gain.
Interface B right channel playback gain.
0 dB gain (default)
6 dB gain
Digital Audio Interface B Playback Datapath Left Channel Volume Gain.
Interface B left channel playback gain.
0 dB gain (default)
6 dB gain
Digital Audio Interface A Playback Datapath Right Channel Volume Gain.
Interface A right channel playback gain.
0 dB gain (default)
6 dB gain
Digital Audio Interface A Playback Datapath Left Channel Volume Gain.
Interface A left channel playback gain.
0 dB gain (default)
6 dB gain
Rev. 0 | Page 188 of 296
Reset
0x0
0x0
Access
RW
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
VOL_GAIN2 (DAI RECORD) REGISTER
Address: 0x77, Reset: 0x00, Name: VOL_GAIN2
Digital Audio Interface Recording Path Volume Control Gain
Table 146. Bit Descriptions for VOL_GAIN2
Bits
[7:6]
5
Bit Name
RESERVED
DAICRECRVOL_GAIN
Settings
0
1
4
DAICRECLVOL_GAIN
0
1
3
DAIBRECRVOL_GAIN
0
1
2
DAIBRECLVOL_GAIN
0
1
1
DAIARECRVOL_GAIN
0
1
0
DAIARECLVOL_GAIN
0
1
Description
Reserved.
Digital Audio Interface C Record Datapath Right Channel Volume Gain.
Interface C right channel recording gain.
0 dB gain (default)
6 dB gain
Digital Audio Interface C Record Datapath Left Channel Volume Gain.
Interface C left channel recording gain.
0 dB gain (default)
6 dB gain
Digital Audio Interface B Record Datapath Right Channel Volume Gain.
Interface B right channel recording gain.
0 dB gain (default)
6 dB gain
Digital Audio Interface B REC Datapath Left Channel Volume Gain.
Interface B left channel recording gain.
0 dB gain (default)
6 dB gain
Digital Audio Interface A Record Datapath Right Channel Volume Gain.
Interface A right channel recording gain.
0 dB gain (default)
6 dB gain
Digital Audio Interface A Record Datapath Left Channel Volume Gain.
Interface A left channel recording gain.
0 dB gain (default)
6 dB gain
Rev. 0 | Page 189 of 296
Reset
0x0
0x0
Access
RW
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
VOL_GAIN3 (CODEC) REGISTER
Address: 0x78, Reset: 0x00, Name: VOL_GAIN3
Codec Playback/Recording Path Volume Control Gain
Table 147. Bit Descriptions for VOL_GAIN3
Bits
7
Bit Name
DRECRVOL_GAIN
Settings
0
1
6
DRECLVOL_GAIN
0
1
5
RECRVOL_GAIN
0
1
4
RECLVOL_GAIN
0
1
3
PBBRVOL_GAIN
0
1
2
PBBLVOL_GAIN
0
1
1
PBARVOL_GAIN
0
1
Description
Codec DMIC Record Datapath Right Channel Volume Gain. Digital microphone
right channel recording volume gain.
0 dB gain (default)
6 dB gain
Codec DMIC Record Datapath Left Channel Volume Gain. Digital microphone left
channel recording volume gain.
0 dB gain (default)
6 dB gain
Codec Record Datapath Right Channel Volume Gain. ADC right channel recording
volume gain.
0 dB gain (default)
6 dB gain
Codec Record Datapath Left Channel Volume Gain. ADC left channel recording
volume gain.
0 dB gain (default)
6 dB gain
Codec Playback B Datapath Right Channel Volume Gain. DAC2 right channel
playback volume gain.
0 dB gain (default)
6 dB gain
Codec Playback B Datapath Left Channel Volume Gain. DAC2 left channel
playback volume gain.
0 dB gain (default)
6 dB gain
Codec Playback A Datapath Right Channel Volume Gain. DAC1 right channel
playback volume gain.
0 dB gain (default)
6 dB gain
Rev. 0 | Page 190 of 296
Reset
0x0
Access
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
Bits
0
Bit Name
PBALVOL_GAIN
Settings
0
1
Description
Codec Playback A Datapath Left Channel Volume Gain. DAC1 left channel
playback volume gain.
0 dB gain (default)
6 dB gain
Reset
0x0
Access
RW
HPF_CTRL REGISTER
Address: 0x7D, Reset: 0x00, Name: HPF_CTRL
DSP High-Pass Filter Setting
Table 148. Bit Descriptions for HPF_CTRL
Bits
[7:3]
Bit Name
HPFF
Settings
00000
00001
00010
00011
00100
00101
00110
00111
01000
01001
01010
01011
01100
01101
01110
01111
10000
2
HPFOR
0
1
Description
High-Pass Filter 3 dB Cutoff Frequency. High-pass filter cutoff frequency selection: 3.7 Hz,
50 Hz to 800 Hz in 16 steps.
3.7 Hz
50 Hz
100 Hz
150 Hz
200 Hz
250 Hz
300 Hz
350 Hz
400 Hz
450 Hz
500 Hz
550 Hz
600 Hz
650 Hz
700 Hz
750 Hz
800 Hz
Store/Clear High-Pass Filter DC Value When HPF Disabled. High-pass filter dc value control.
Clear dc value
Store dc value
Rev. 0 | Page 191 of 296
Reset
0x00
Access
RW
0x0
RW
ADAU1373
Bits
[1:0]
Bit Name
HPFEN
Settings
00
01
10
11
Description
High-Pass Filter Enable. High-pass filter enable/disable control.
Both channels disabled (default)
Right channel enabled
Left channel enabled
Both channels enabled
Reset
0x0
Access
RW
Reset
0x0
0x0
Access
RW
RW
0x0
RW
0x0
RW
BASS1 REGISTER
Address: 0x7E, Reset: 0x00, Name: BASS1
Bass Enhancement Control Register
Table 149. Bit Descriptions for BASS1
Bits
[7:6]
5
Bit Name
RESERVED
BASS_LPF
Settings
0
1
[4:2]
BASS_CUT
000
001
010
011
100
101
110
111
[1:0]
BASS_SPK
00
01
10
11
Description
Reserved.
Bass Output Frequency Range. Cutoff frequency setting for low-pass filter bass
enhancement.
801 Hz
1001 Hz
Signal Extend Density (Clip Level). Overdrive level for bass enhancement.
Reserved
0.125
0.250
0.370
0.500
0.625
0.750
0.875
High-Pass Filter Cutoff Frequency. Cutoff frequency setting for high-pass filter bass
enhancement.
158 Hz
232 Hz
347 Hz
520 Hz
Rev. 0 | Page 192 of 296
ADAU1373
BASS2 REGISTER
Address: 0x7F, Reset: 0x00, Name: BASS2
Bass Enhancement Control Register
Table 150. Bit Descriptions for BASS2
Bits
[7:5]
[4:2]
Bit Name
RESERVED
BASS_GAIN
Settings
000
001
010
011
100
101
110
111
[1:0]
BASS_SEL
00
01
10
11
Description
Reserved.
Bass Enhancement Gain. Gain control setting for bass enhancement.
Reserved
0 dB
6 dB
9.5 dB
12 dB
14 dB
15.5 dB
17 dB
Left/Right Channel Selection. Channel selection for bass enhancement.
Both channels off
Left channel on
Right channel on
Both channels on
Rev. 0 | Page 193 of 296
Reset
0x0
0x0
Access
RW
RW
0x0
RW
ADAU1373
DRC1_CTRL1 REGISTER
Address: 0x80, Reset: 0x78, Name: DRC1_CTRL1
DRC1 Level Detector Averaging Time and DRC Noise Gate Recovery Time Setting
Table 151. Bit Descriptions for DRC1_CTRL1
Bits
[7:4]
Bit Name
DRCNGREC
Settings
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
[3:0]
DRCLELTAV
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
Description
DRC1 Noise Gate Recovery Time.
46.875 μs
93.75 μs
187.5 μs
375 μs
750 μs
1.5 ms
3 ms
6 ms (default)
12 ms
24 ms
48 ms
96 ms
192 ms
384 ms
768 ms
1.536 sec
DRC1 RMS Detector Average Time.
750 μs
1.5 ms
3 ms
6 ms
12 ms
24 ms
48 ms
96 ms
192 ms (default)
384 ms
768 ms
1.536 sec
Rev. 0 | Page 194 of 296
Reset
0x7
Access
RW
0x8
RW
ADAU1373
Bits
Bit Name
Settings
1100
1101
1110
1111
Description
3.072 sec
6.144 sec
12.288 sec
24.576 sec
Reset
Access
Reset
0x1
Access
RW
DRC1_CTRL2 REGISTER
Address: 0x81, Reset: 0x18, Name: DRC1_CTRL2
DRC1 Attack and Decay Time Setting
Table 152. Bit Descriptions for DRC1_CTRL2
Bits
[7:4]
Bit Name
DRCLELATT
Settings
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
Description
DRC1 Peak Detector Attack Time.
46.875 μs
93.75 μs (default)
187.5 μs
375 μs
750 μs
1.5 ms
3 ms
6 ms
12 ms
24 ms
48 ms
96 ms
192 ms
384 ms
768 ms
1.536 sec
Rev. 0 | Page 195 of 296
ADAU1373
Bits
[3:0]
Bit Name
DRCLELDEC
Settings
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
Description
DRC1 Peak Detector Decay Time.
750 μs
1.5 ms
3 ms
6 ms
12 ms
24 ms
48 ms
96 ms
192 ms (default)
384 ms
768 ms
1.536 sec
3.072 sec
6.144 sec
12.288 sec
24.576 sec
Reset
0x8
Access
RW
Reset
0x00
Access
RW
DRC1_CTRL3 REGISTER
Address: 0x82, Reset: 0x00, Name: DRC1_CTRL3
DRC1 Threshold Point X1 on X-Axis (Input Level)
Table 153. Bit Descriptions for DRC1_CTRL3
Bits
[7:0]
Bit Name
DRCTHX1
Settings
00000000
00000001
00000010
xxxxxxx
11000000
Description
DRC1 X-Axis Threshold 1.
0 dB (default)
−0.5 dB
−1 dB
0.5 dB step
−96 dB
Rev. 0 | Page 196 of 296
ADAU1373
DRC1_CTRL4 REGISTER
Address: 0x83, Reset: 0x00, Name: DRC1_CTRL4
DRC1 Threshold Point X2 on X-Axis (Input Level)
Table 154. Bit Descriptions for DRC1_CTRL4
Bits
[7:0]
Bit Name
DRCTHX2
Settings
00000000
00000001
00000010
xxxxxxx
11000000
Description
DRC1 X-Axis Threshold 2.
0 dB (default)
−0.5 dB
−1 dB
0.5 dB step
−96 dB
Reset
0x00
Access
RW
Reset
0x00
Access
RW
DRC1_CTRL5 REGISTER
Address: 0x84, Reset: 0x00, Name: DRC1_CTRL5
DRC1 Threshold Point X3 on X-Axis (Input Level)
Table 155. Bit Descriptions for DRC1_CTRL5
Bits
[7:0]
Bit Name
DRCTHX3
Settings
00000000
00000001
00000010
xxxxxxx
11000000
Description
DRC1 X-Axis Threshold 3.
0 dB (default)
−0.5 dB
−1 dB
0.5 dB step
−96 dB
Rev. 0 | Page 197 of 296
ADAU1373
DRC1_CTRL6 REGISTER
Address: 0x85, Reset: 0xC0, Name: DRC1_CTRL6
DRC1 Threshold Point X4 on X-Axis (Input Level)
Table 156. Bit Descriptions for DRC1_CTRL6
Bits
[7:0]
Bit Name
DRCTHX4
Settings
00000000
00000001
00000010
xxxxxxx
11000000
Description
DRC1 X-Axis Threshold 4.
0 dB
−0.5 dB
−1 dB
0.5 dB step
−96 dB (default)
Reset
0xC0
Access
RW
Reset
0x00
Access
RW
DRC1_CTRL7 REGISTER
Address: 0x86, Reset: 0x00, Name: DRC1_CTRL7
DRC1 Threshold Point Y1 on Y-Axis (Output Level)
Table 157. Bit Descriptions for DRC1_CTRL7
Bits
[7:0]
Bit Name
DRCTHY1
Settings
00000000
00000001
00000010
xxxxxxx
11000000
Description
DRC1 Y-Axis Threshold 1.
0 dB (default)
−0.5 dB
−1 dB
0.5 dB step
−96 dB
Rev. 0 | Page 198 of 296
ADAU1373
DRC1_CTRL8 REGISTER
Address: 0x87, Reset: 0x00, Name: DRC1_CTRL8
DRC1 Threshold Point Y2 on Y-Axis (Output Level)
Table 158. Bit Descriptions for DRC1_CTRL8
Bits
[7:0]
Bit Name
DRCTHY2
Settings
00000000
00000001
00000010
xxxxxxx
11000000
Description
DRC1 Y-Axis Threshold 2.
0 dB (default)
−0.5 dB
−1 dB
0.5 dB step
−96 dB
Reset
0x00
Access
RW
Reset
0x00
Access
RW
DRC1_CTRL9 REGISTER
Address: 0x88, Reset: 0x00, Name: DRC1_CTRL9
DRC1 Threshold Point Y3 on Y-Axis (Output Level)
Table 159. Bit Descriptions for DRC1_CTRL9
Bits
[7:0]
Bit Name
DRCTHY3
Settings
00000000
00000001
00000010
xxxxxxx
11000000
Description
DRC1 Y-Axis Threshold 3.
0 dB (default)
−0.5 dB
−1 dB
0.5 dB step
−96 dB
Rev. 0 | Page 199 of 296
ADAU1373
DRC1_CTRL10 REGISTER
Address: 0x89, Reset: 0xC0, Name: DRC1_CTRL10
DRC1 Threshold Point Y4 on Y-Axis (Output Level).
Table 160. Bit Descriptions for DRC1_CTRL10
Bits
[7:0]
Bit Name
DRCTHY4
Settings
00000000
00000001
00000010
xxxxxxx
11000000
Description
DRC1 Y-Axis Threshold 4.
0 dB
−0.5 dB
−1 dB
0.5 dB step
−96 dB (default)
DRC1_CTRL11 REGISTER
Address: 0x8A, Reset: 0x88, Name: DRC1_CTRL11
DRC1 Gain Smoothing Attack and Decay Time Setting
Rev. 0 | Page 200 of 296
Reset
0xC0
Access
RW
ADAU1373
Table 161. Bit Descriptions for DRC1_CTRL11
Bits
[7:4]
Bit Name
DRCGSATT
Settings
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
[3:0]
DRCGSDEC
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
Description
DRC1 Gain Smooth Attack Time.
46.875 μs
93.75 μs
187.5 μs
375 μs
750 μs
1.5 ms
3 ms
6 ms
12 ms (default)
24 ms
48 ms
96 ms
192 ms
384 ms
768 ms
1.536 sec
DRC1 Gain Smooth Decay Time.
750 μs
1.5 ms
3 ms
6 ms
12 ms
24 ms
48 ms
96 ms
192 ms (default)
384 ms
768 ms
1.536 sec
3.072 sec
6.144 sec
12.288 sec
24.576 sec
Rev. 0 | Page 201 of 296
Reset
0x8
Access
RW
0x8
RW
ADAU1373
DRC1_CTRL12 REGISTER
Address: 0x8B, Reset: 0x7A, Name: DRC1_CTRL12
DRC1 Noise Gate Hold Time and Normal Operation Hold Time Setting
Table 162. Bit Descriptions for DRC1_CTRL12
Bits
[7:4]
Bit Name
DRCHTNOR
Settings
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
[3:0]
DRCHTNG
0000
0001
0010
0011
0100
0101
Description
DRC1 Hold Time for Normal Operation.
0 ms
0.67 ms
1.34 ms
2.68 ms
5.36 ms
10.72 ms
21.44 ms
42.88 ms (default)
85.76 ms
171.52 ms
341.33 ms
686 ms
1.37 sec
Reserved
Reserved
Reserved
DRC1 Hold Time for Noise Gating.
0 ms
0.67 ms
1.34 ms
2.68 ms
5.36 ms
10.72 ms
Rev. 0 | Page 202 of 296
Reset
0x7
Access
RW
0xA
RW
ADAU1373
Bits
Bit Name
Settings
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
Description
21.44 ms
42.88 ms
85.76 ms
171.52 ms
341.33 ms (default)
686 ms
1.37 sec
Reserved
Reserved
Reserved
Reset
Access
Reset
0x7
Access
RW
DRC1_CTRL13 REGISTER
Address: 0x8C, Reset: 0xDF, Name: DRC1_CTRL13
DRC1 Gain Setting
Table 163. Bit Descriptions for DRC1_CTRL13
Bits
[5:2]
Bit Name
DRCG
Settings
0000
0001
xxxx
0111
1111
Description
DRC1 Adjust Gain. DRC1 gain setting.
21 dB
18 dB
3 dB step size
0 dB (default)
−24 dB
Rev. 0 | Page 203 of 296
ADAU1373
DRC1_CTRL14 REGISTER
Address: 0x8D, Reset: 0x20, Name: DRC1_CTRL14
DRC1 Enable Control
Table 164. Bit Descriptions for DRC1_CTRL14
Bits
7
Bit Name
DRCNGTGT
Settings
0
1
6
DRCNGHDEN
0
1
5
DRCNGSRC
0
1
4
DRCCESRC
0
1
3
DRCLMSRC
0
1
2
DRCNGEN
0
1
[1:0]
DRCEN
00
01
10
11
Description
DRC1 Noise Gate Recovery Target.
Target: DRC minimum output
Target: determined by DRC curve
DRC1 Noise Gate Recovery Hold Enable.
DRC noise gate recovery hold time disable
DRC noise gate recovery hold time enable
DRC1 Noise Gate Recovery Source.
RMS
Peak (default)
DRC1 Compressor/Expander Source.
RMS
Peak
DRC1 Limiter Source.
RMS
Peak
DRC1 Noise Gating Enable.
DRC noise gate disable
DRC noise gate enable
DRC1 Enable.
None (default)
Right channel enable
Left channel enable
Both channels enable
Rev. 0 | Page 204 of 296
Reset
0x0
Access
RW
0x0
RW
0x1
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
DRC1_CTRL15 REGISTER
Address: 0x8E, Reset: 0x00, Name: DRC1_CTRL15
DRC1 Peak to RMS Ratio and RMS Detector Setting Register
Table 165. Bit Descriptions for DRC1_CTRL15
Bits
7
[6:2]
Bit Name
RESERVED
SIG_DET_RMS
Settings
00000
00001
00010
xxxxx
11111
[1:0]
SIG_DET_PK
00
01
10
11
Description
Reserved.
DRC1 IRQ RMS Value. DRC RMS detector setting.
−30 dB
−31.5 dB
−33 dB
−1.5 dB step size
−76.5 dB
DRC1 IRQ Source Ratio Between Peak and RMS. DRC peak to rms ratio
setting.
12 dB
18 dB
24 dB
30 dB
Rev. 0 | Page 205 of 296
Reset
0x0
0x00
Access
RW
RW
0x0
RW
ADAU1373
DRC1_CTRL16 REGISTER
Address: 0x8F, Reset: 0x00, Name: DRC1_CTRL16
DRC1 IRQ Enable/Disable and IRQ Source Selection Setting Register
Table 166. Bit Descriptions for DRC1_CTRL16
Bits
[7:3]
2
Bit Name
RESERVED
ALG_NGEN
Settings
0
1
1
DRCIRQ_MODE
0
1
0
DRCIRQ_EN
0
1
Description
Reserved.
Analog Noise Gate Enable.
Analog noise gate disable
Analog noise gate enable
DRC1 IRQ Mode. DRC IRQ source selection setting.
DRC IRQ source: rms
DRC IRQ source: Peak to rms ratio
DRC1 IRQ Enable Control. DRC IRQ enable/disable control.
DRC IRQ disable
DRC IRQ enable
Rev. 0 | Page 206 of 296
Reset
0x00
0x0
Access
RW
RW
0x0
RW
0x0
RW
ADAU1373
DRC2_CTRL1 REGISTER
Address: 0x90, Reset: 0x78, Name: DRC2_CTRL1
DRC2 Level Detector Averaging Time and DRC Noise Gate Recovery Time Setting
Table 167. Bit Descriptions for DRC2_CTRL1
Bits
[7:4]
Bit Name
DRCNGREC
Settings
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
[3:0]
DRCLELTAV
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
Description
DRC2 Noise Gate Recovery Time.
46.875 μs
93.75 μs
187.5 μs
375 μs
750 μs
1.5 ms
3 ms
6 ms (default)
12 ms
24 ms
48 ms
96 ms
192 ms
384 ms
768 ms
1.536 sec
DRC2 RMS Detector Average Time.
750 μs
1.5 ms
3 ms
6 ms
12 ms
24 ms
48 ms
96 ms
192 ms (default)
384 ms
768 ms
Rev. 0 | Page 207 of 296
Reset
0x7
Access
RW
0x8
RW
ADAU1373
Bits
Bit Name
Settings
1011
1100
1101
1110
1111
Description
1.536 sec
3.072 sec
6.144 sec
12.288 sec
24.576 sec
Reset
Access
Reset
0x1
Access
RW
DRC2_CTRL2 REGISTER
Address: 0x91, Reset: 0x18, Name: DRC2_CTRL2
DRC2 Attack and Decay Time Setting
Table 168. Bit Descriptions for DRC2_CTRL2
Bits
[7:4]
Bit Name
DRCLELATT
Settings
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
Description
DRC2 Peak Detector Attack Time.
46.875 μs
93.75 μs (default)
187.5 μs
375 μs
750 μs
1.5 ms
3 ms
6 ms
12 ms
24 ms
48 ms
96 ms
192 ms
384 ms
768 ms
1.536 sec
Rev. 0 | Page 208 of 296
ADAU1373
Bits
[3:0]
Bit Name
DRCLELDEC
Settings
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
Description
DRC2 Peak Detector Decay Time.
750 μs
1.5 ms
3 ms
6 ms
12 ms
24 ms
48 ms
96 ms
192 ms (default)
384 ms
768 ms
1.536 sec
3.072 sec
6.144 sec
12.288 sec
24.576 sec
Reset
0x8
Access
RW
Reset
0x00
Access
RW
DRC2_CTRL3 REGISTER
Address: 0x92, Reset: 0x00, Name: DRC2_CTRL3
DRC2 Threshold Point X1 on X-Axis (Input Level)
Table 169. Bit Descriptions for DRC2_CTRL3
Bits
[7:0]
Bit Name
DRCTHX1
Settings
00000000
00000001
00000010
xxxxxxxx
11000000
Description
DRC2 X-Axis Threshold 1.
0 dB (default)
−0.5 dB
−1 dB
0.5 dB step size
−96 dB
Rev. 0 | Page 209 of 296
ADAU1373
DRC2_CTRL4 REGISTER
Address: 0x93, Reset: 0x00, Name: DRC2_CTRL4
DRC2 Threshold Point X2 on X-Axis (Input Level)
Table 170. Bit Descriptions for DRC2_CTRL4
Bits
[7:0]
Bit Name
DRCTHX2
Settings
00000000
00000001
00000010
xxxxxxxx
11000000
Description
DRC2 X-Axis Threshold 2.
0 dB (default)
−0.5 dB
−1 dB
0.5 dB step size
−96 dB
Reset
0x00
Access
RW
Reset
0x00
Access
RW
DRC2_CTRL5 REGISTER
Address: 0x94, Reset: 0x00, Name: DRC2_CTRL5
DRC2 Threshold Point X3 on X-Axis (Input Level)
Table 171. Bit Descriptions for DRC2_CTRL5
Bits
[7:0]
Bit Name
DRCTHX3
Settings
00000000
00000001
00000010
xxxxxxxx
11000000
Description
DRC2 X-Axis Threshold 3.
0 dB (default)
−0.5 dB
−1 dB
0.5 dB step size
−96 dB
Rev. 0 | Page 210 of 296
ADAU1373
DRC2_CTRL6 REGISTER
Address: 0x95, Reset: 0xC0, Name: DRC2_CTRL6
DRC2 Threshold Point X4 on X-Axis (Input Level)
Table 172. Bit Descriptions for DRC2_CTRL6
Bits
[7:0]
Bit Name
DRCTHX4
Settings
00000000
00000001
00000010
xxxxxxxx
11000000
Description
DRC2 X-Axis Threshold 4.
0 dB
−0.5 dB
−1 dB
0.5 dB step size
−96 dB (default)
Reset
0xC0
Access
RW
Reset
0x00
Access
RW
DRC2_CTRL7 REGISTER
Address: 0x96, Reset: 0x00, Name: DRC2_CTRL7
DRC2 Threshold Point Y1 on Y-Axis (Output Level)
Table 173. Bit Descriptions for DRC2_CTRL7
Bits
[7:0]
Bit Name
DRCTHY1
Settings
00000000
00000001
00000010
xxxxxxxx
11000000
Description
DRC2 Y-Axis Threshold 1.
0 dB (default)
−0.5 dB
−1 dB
0.5 dB step size
−96 dB
Rev. 0 | Page 211 of 296
ADAU1373
DRC2_CTRL8 REGISTER
Address: 0x97, Reset: 0x00, Name: DRC2_CTRL8
DRC2 Threshold Point Y2 on Y-Axis (Output Level)
Table 174. Bit Descriptions for DRC2_CTRL8
Bits
[7:0]
Bit Name
DRCTHY2
Settings
00000000
00000001
00000010
xxxxxxxx
11000000
Description
DRC2 Y-Axis Threshold 2.
0 dB (default)
−0.5 dB
−1 dB
0.5 dB step size
−96 dB
Reset
0x00
Access
RW
Reset
0x00
Access
RW
DRC2_CTRL9 REGISTER
Address: 0x98, Reset: 0x00, Name: DRC2_CTRL9
DRC2 Threshold Point Y3 on Y-Axis (Output Level)
Table 175. Bit Descriptions for DRC2_CTRL9
Bits
[7:0]
Bit Name
DRCTHY3
Settings
00000000
00000001
00000010
xxxxxxxx
11000000
Description
DRC2 Y-Axis Threshold 3.
0 dB (default)
−0.5 dB
−1 dB
0.5 dB step size
−96 dB
Rev. 0 | Page 212 of 296
ADAU1373
DRC2_CTRL10 REGISTER
Address: 0x99, Reset: 0xC0, Name: DRC2_CTRL10
DRC2 Threshold Point Y4 on Y-Axis (Output Level)
Table 176. Bit Descriptions for DRC2_CTRL10
Bits
[7:0]
Bit Name
DRCTHY4
Settings
00000000
00000001
00000010
xxxxxxxx
11000000
Description
DRC2 Y-Axis Threshold 4.
0 dB
−0.5 dB
−1 dB
0.5 dB step size
−96 dB (default)
DRC2_CTRL11 REGISTER
Address: 0x9A, Reset: 0x88, Name: DRC2_CTRL11
DRC2 Gain Smoothing Attack and Decay Time Setting
Rev. 0 | Page 213 of 296
Reset
0xC0
Access
RW
ADAU1373
Table 177. Bit Descriptions for DRC2_CTRL11
Bits
[7:4]
Bit Name
DRCGSATT
Settings
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
[3:0]
DRCGSDEC
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
Description
DRC2 Gain Smooth Attack Time.
46.875 μs
93.75 μs
187.5 μs
375 μs
750 μs
1.5 ms
3 ms
6 ms
12 ms (default)
24 ms
48 ms
96 ms
192 ms
384 ms
768 ms
1.536 sec
DRC Gain Smooth Decay Time.
750 μs
1.5 ms
3 ms
6 ms
12 ms
24 ms
48 ms
96 ms
192 ms (default)
384 ms
768 ms
1.536 sec
3.072 sec
6.144 sec
12.288 sec
24.576 sec
Rev. 0 | Page 214 of 296
Reset
0x8
Access
RW
0x8
RW
ADAU1373
DRC2_CTRL12 REGISTER
Address: 0x9B, Reset: 0x7A, Name: DRC2_CTRL12
DRC2 Noise Gate Hold Time and Normal Operation Hold Time Setting
Table 178. Bit Descriptions for DRC2_CTRL12
Bits
[7:4]
Bit Name
DRCHTNOR
Settings
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
[3:0]
DRCHTNG
0000
0001
0010
0011
0100
0101
Description
DRC2 Hold Time for Normal Operation.
0 ms
0.67 ms
1.34 ms
2.68 ms
5.36 ms
10.72 ms
21.44 ms
42.88 ms (default)
85.76 ms
171.52 ms
341.33 ms
686 ms
1.37 sec
Reserved
Reserved
Reserved
DRC2 Hold Time for Noise Gating.
0 ms
0.67 ms
1.34 ms
2.68 ms
5.36 ms
10.72 ms
Rev. 0 | Page 215 of 296
Reset
0x7
Access
RW
0xA
RW
ADAU1373
Bits
Bit Name
Settings
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
Description
21.44 ms
42.88 ms
85.76 ms
171.52 ms
341.33 ms (default)
686 ms
1.37 sec
Reserved
Reserved
Reserved
Reset
Access
Reset
0x7
Access
RW
DRC2_CTRL13 REGISTER
Address: 0x9C, Reset: 0xDF, Name: DRC2_CTRL13
DRC2 Gain Setting
Table 179. Bit Descriptions for DRC2_CTRL13
Bits
[5:2]
Bit Name
DRCG
Settings
0000
0001
xxxx
0111
1111
Description
DRC2 Adjust Gain. DRC2 gain.
21 dB
18 dB
3 dB step size
0 dB (default)
−24 dB
Rev. 0 | Page 216 of 296
ADAU1373
DRC2_CTRL14 REGISTER
Address: 0x9D, Reset: 0x20, Name: DRC2_CTRL14
DRC2 Enable Control
Table 180. Bit Descriptions for DRC2_CTRL14
Bits
7
Bit Name
DRCNGTGT
Settings
0
1
6
DRCNGHDEN
0
1
5
DRCNGSRC
0
1
4
DRCCESRC
0
1
3
DRCLMSRC
0
1
2
DRCNGEN
0
1
[1:0]
DRCEN
00
01
10
11
Description
DRC2 Noise Gate Recovery Target.
Target: DRC minimum output
Target: determined by DRC curve
DRC2 Noise Gate Recovery Hold Enable.
DRC noise gate recovery hold time disable
DRC noise gate recovery hold time enable
DRC2 Noise Gate Recovery Source.
RMS
Peak (default)
DRC2 Compressor/Expander Source.
RMS
Peak
DRC2 Limiter Source.
RMS
Peak
DRC2 Noise Gating Enable.
DRC noise gate disable
DRC noise gate enable
DRC2 Enable.
None (default)
Right channel enable
Left channel enable
Both channels enable
Rev. 0 | Page 217 of 296
Reset
0x0
Access
RW
0x0
RW
0x1
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
DRC2_CTRL15 REGISTER
Address: 0x9E, Reset: 0x00, Name: DRC2_CTRL15
DRC2 Peak to RMS Ratio and RMS Detector Setting Register
Table 181. Bit Descriptions for DRC2_CTRL15
Bits
7
[6:2]
Bit Name
RESERVED
SIG_DET_RMS
Settings
00000
00001
00010
xxxxx
11111
[1:0]
SIG_DET_PK
00
01
10
11
Description
Reserved.
DRC2 IRQ RMS Value. DRC rms detector setting.
−30 dB
−31.5 dB
−33 dB
−1.5 dB step size
−76.5 dB
DRC2 IRQ Source Ratio Between Peak and RMS. DRC peak to rms ratio
setting.
12 dB
18 dB
24 dB
30 dB
Rev. 0 | Page 218 of 296
Reset
0x0
0x00
Access
RW
RW
0x0
RW
ADAU1373
DRC2_CTRL16 REGISTER
Address: 0x9F, Reset: 0x00, Name: DRC2_CTRL16
DRC2 IRQ Enable/Disable and IRQ Source Selection Setting Register
Table 182. Bit Descriptions for DRC2_CTRL16
Bits
[7:3]
2
Bit Name
RESERVED
ALG_NGEN
Settings
Description
0
1
1
DRCIRQ_MODE
0
1
0
DRCIRQ_EN
0
1
Analog Noise Gate Enable.
Analog noise gate disable
Analog noise gate enable
DRC2 IRQ Mode. DRC IRQ source selection setting.
DRC IRQ source: rms
DRC IRQ source: peak to rms ratio
DRC2 IRQ Enable Control. DRC IRQ enable/disable control.
DRC IRQ disable
DRC IRQ enable
Rev. 0 | Page 219 of 296
Reset
0x00
0x0
Access
RW
RW
0x0
RW
0x0
RW
ADAU1373
DRC3_CTRL1 REGISTER
Address: 0xA0, Reset: 0x78, Name: DRC3_CTRL1
DRC3 Level Detector Averaging Time and DRC Noise Gate Recovery Time Setting
Table 183. Bit Descriptions for DRC3_CTRL1
Bits
[7:4]
Bit Name
DRCNGREC
Settings
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
[3:0]
DRCLELTAV
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
Description
DRC3 Noise Gate Recovery Time.
46.875 μs
93.75 μs
187.5 μs
375 μs
750 μs
1.5 ms
3 ms
6 ms
12 ms
24 ms
48 ms
96 ms
192 ms
384 ms
768 ms
1.536 sec
DRC3 RMS Detector Average Time.
750 μs
1.5 ms
3 ms
6 ms
12 ms
24 ms
48 ms
96 ms
192 ms
384 ms
768 ms
Rev. 0 | Page 220 of 296
Reset
0x7
Access
RW
0x8
RW
ADAU1373
Bits
Bit Name
Settings
1011
1100
1101
1110
1111
Description
1.536 sec
3.072 sec
6.144 sec
12.288 sec
24.576 sec
Reset
Access
Reset
0x1
Access
RW
DRC3_CTRL2 REGISTER
Address: 0xA1, Reset: 0x18, Name: DRC3_CTRL2
DRC3 Attack and Decay Time Setting
Table 184. Bit Descriptions for DRC3_CTRL2
Bits
[7:4]
Bit Name
DRCLELATT
Settings
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
Description
DRC3 Peak Detector Attack Time.
46.875 μs
93.75 μs (default)
187.5 μs
375 μs
750 μs
1.5 ms
3 ms
6 ms
12 ms
24 ms
48 ms
96 ms
192 ms
384 ms
768 ms
1.536 sec
Rev. 0 | Page 221 of 296
ADAU1373
Bits
[3:0]
Bit Name
DRCLELDEC
Settings
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
Description
DRC3 Peak Detector Decay Time.
750 μs
1.5 ms
3 ms
6 ms
12 ms
24 ms
48 ms
96 ms
192 ms (default)
384 ms
768 ms
1.536 sec
3.072 sec
6.144 sec
12.288 sec
24.576 sec
Reset
0x8
Access
RW
Reset
0x00
Access
RW
DRC3_CTRL3 REGISTER
Address: 0xA2, Reset: 0x00, Name: DRC3_CTRL3
DRC3 Threshold Point X1 on X-Axis (Input Level)
Table 185. Bit Descriptions for DRC3_CTRL3
Bits
[7:0]
Bit Name
DRCTHX1
Settings
00000000
00000001
00000010
xxxxxxxx
11000000
Description
DRC3 X-Axis Threshold 1.
0 dB (default)
−0.5 dB
−1 dB
0.5 dB step
−96 dB
Rev. 0 | Page 222 of 296
ADAU1373
DRC3_CTRL4 REGISTER
Address: 0xA3, Reset: 0x00, Name: DRC3_CTRL4
DRC3 Threshold Point X2 on X-Axis (Input Level)
Table 186. Bit Descriptions for DRC3_CTRL4
Bits
[7:0]
Bit Name
DRCTHX2
Settings
00000000
00000001
00000010
xxxxxxxx
11000000
Description
DRC3 X-Axis Threshold 2.
0 dB (default)
−0.5 dB
−1 dB
0.5 dB step
−96 dB
Reset
0x00
Access
RW
Reset
0x00
Access
RW
DRC3_CTRL5 REGISTER
Address: 0xA4, Reset: 0x00, Name: DRC3_CTRL5
DRC3 Threshold Point X3 on X-Axis (Input Level)
Table 187. Bit Descriptions for DRC3_CTRL5
Bits
[7:0]
Bit Name
DRCTHX3
Settings
00000000
00000001
00000010
xxxxxxxx
11000000
Description
DRC3 X-Axis Threshold 3.
0 dB (default)
−0.5 dB
−1 dB
0.5 dB step
−96 dB
Rev. 0 | Page 223 of 296
ADAU1373
DRC3_CTRL6 REGISTER
Address: 0xA5, Reset: 0xC0, Name: DRC3_CTRL6
DRC3 Threshold Point X4 on X-Axis (Input Level)
Table 188. Bit Descriptions for DRC3_CTRL6
Bits
[7:0]
Bit Name
DRCTHX4
Settings
00000000
00000001
00000010
xxxxxxxx
11000000
Description
DRC3 X-Axis Threshold 4.
0 dB
−0.5 dB
−1 dB
0.5 dB step
−96 dB (default)
Reset
0xC0
Access
RW
Reset
0x00
Access
RW
DRC3_CTRL7 REGISTER
Address: 0xA6, Reset: 0x00, Name: DRC3_CTRL7
DRC3 Threshold Point Y1 on Y-Axis (Output Level)
Table 189. Bit Descriptions for DRC3_CTRL7
Bits
[7:0]
Bit Name
DRCTHY1
Settings
00000000
00000001
00000010
xxxxxxxx
11000000
Description
DRC3 Y-Axis Threshold 1.
0 dB (default)
−0.5 dB
−1 dB
0.5 dB step
−96 dB
Rev. 0 | Page 224 of 296
ADAU1373
DRC3_CTRL8 REGISTER
Address: 0xA7, Reset: 0x00, Name: DRC3_CTRL8
DRC3 Threshold Point Y2 on Y-Axis (Output Level)
Table 190. Bit Descriptions for DRC3_CTRL8
Bits
[7:0]
Bit Name
DRCTHY2
Settings
00000000
00000001
00000010
xxxxxxxx
11000000
Description
DRC3 Y-Axis Threshold 2.
0 dB (default)
−0.5 dB
−1 dB
0.5 dB step
−96 dB
Reset
0x00
Access
RW
Reset
0x00
Access
RW
DRC3_CTRL9 REGISTER
Address: 0xA8, Reset: 0x00, Name: DRC3_CTRL9
DRC3 Threshold Point Y3 on Y-Axis (Output Level)
Table 191. Bit Descriptions for DRC3_CTRL9
Bits
[7:0]
Bit Name
DRCTHY3
Settings
00000000
00000001
00000010
xxxxxxxx
11000000
Description
DRC3 Y-Axis Threshold 3.
0 dB (default)
−0.5 dB
−1 dB
0.5 dB step
−96 dB
Rev. 0 | Page 225 of 296
ADAU1373
DRC3_CTRL10 REGISTER
Address: 0xA9, Reset: 0xC0, Name: DRC3_CTRL10
DRC3 Threshold Point Y4 on Y-Axis (Output Level)
Table 192. Bit Descriptions for DRC3_CTRL10
Bits
[7:0]
Bit Name
DRCTHY4
Settings
00000000
00000001
00000010
xxxxxxxx
11000000
Description
DRC3 Y-Axis Threshold 4.
0 dB
−0.5 dB
−1 dB
0.5 dB step
−96 dB (default)
DRC3_CTRL11 REGISTER
Address: 0xAA, Reset: 0x88, Name: DRC3_CTRL11
DRC3 Gain Smoothing Attack and Decay Time Setting
Rev. 0 | Page 226 of 296
Reset
0xC0
Access
RW
ADAU1373
Table 193. Bit Descriptions for DRC3_CTRL11
Bits
[7:4]
Bit Name
DRCGSATT
Settings
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
[3:0]
DRCGSDEC
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
Description
DRC3 Gain Smooth Attack Time.
46.875 μs
93.75 μs
187.5 μs
375 μs
750 μs
1.5 ms
3 ms
6 ms
12 ms (default)
24 ms
48 ms
96 ms
192 ms
384 ms
768 ms
1.536 sec
DRC3 Gain Smooth Decay Time.
750 μs
1.5 ms
3 ms
6 ms
12 ms
24 ms
48 ms
96 ms
192 ms (default)
384 ms
768 ms
1.536 sec
3.072 sec
6.144 sec
12.288 sec
24.576 sec
Rev. 0 | Page 227 of 296
Reset
0x8
Access
RW
0x8
RW
ADAU1373
DRC3_CTRL12 REGISTER
Address: 0xAB, Reset: 0x7A, Name: DRC3_CTRL12
DRC3 Noise Gate Hold Time and Normal Operation Hold Time Setting
Table 194. Bit Descriptions for DRC3_CTRL12
Bits
[7:4]
Bit Name
DRCHTNOR
Settings
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
[3:0]
DRCHTNG
0000
0001
0010
0011
0100
0101
Description
DRC3 Hold Time for Normal Operation.
0 ms
0.67 ms
1.34 ms
2.68 ms
5.36 ms
10.72 ms
21.44 ms
42.88 ms (default)
85.76 ms
171.52 ms
341.33 ms
686 ms
1.37 sec
Reserved
Reserved
Reserved
DRC3 Hold Time for Noise Gating.
0 ms
0.67 ms
1.34 ms
2.68 ms
5.36 ms
10.72 ms
Rev. 0 | Page 228 of 296
Reset
0x7
Access
RW
0xA
RW
ADAU1373
Bits
Bit Name
Settings
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
Description
21.44 ms
42.88 ms
85.76 ms
171.52 ms
341.33 ms (default)
686 ms
1.37 sec
Reserved
Reserved
Reserved
Reset
Access
Reset
0x7
Access
RW
DRC3_CTRL13 REGISTER
Address: 0xAC, Reset: 0xDF, Name: DRC3_CTRL13
DRC3 Gain Setting
Table 195. Bit Descriptions for DRC3_CTRL13
Bits
[5:2]
Bit Name
DRCG
Settings
0000
0001
xxxx
0111
1111
Description
DRC3 Adjust Gain. DRC3 gain setting.
21 dB
18 dB
3 dB step
0 dB (default)
−24 dB
Rev. 0 | Page 229 of 296
ADAU1373
DRC3_CTRL14 REGISTER
Address: 0xAD, Reset: 0x20, Name: DRC3_CTRL14
DRC3 Enable Control
Table 196. Bit Descriptions for DRC3_CTRL14
Bits
7
Bit Name
DRCNGTGT
Settings
0
1
6
DRCNGHDEN
0
1
5
DRCNGSRC
0
1
4
DRCCESRC
0
1
3
DRCLMSRC
0
1
2
DRCNGEN
0
1
[1:0]
DRCEN
00
01
10
11
Description
DRC3 Noise Gate Recovery Target.
Target: DRC minimum output
Target: determined by DRC curve
DRC3 Noise Gate Recovery Hold Enable.
DRC noise gate recovery hold time disable
DRC noise gate recovery hold time enable
DRC3 Noise Gate Recovery Source.
RMS
Peak (default)
DRC3 Compressor/Expander Source.
RMS
Peak
DRC3 Limiter Source.
RMS
Peak
DRC3 Noise Gating Enable.
DRC noise gate disable
DRC noise gate enable
DRC3 Enable.
None (default)
Right channel enable
Left channel enable
Both channels enable
Rev. 0 | Page 230 of 296
Reset
0x0
Access
RW
0x0
RW
0x1
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
DRC3_CTRL15 REGISTER
Address: 0xAE, Reset: 0x00, Name: DRC3_CTRL15
DRC3 Peak to RMS Ratio and RMS Detector Setting Register
Table 197. Bit Descriptions for DRC3_CTRL15
Bits
7
[6:2]
Bit Name
RESERVED
SIG_DET_RMS
Settings
00000
00001
00010
xxxxx
11111
[1:0]
SIG_DET_PK
00
01
10
11
Description
Reserved.
DRC3 IRQ RMS Value. DRC rms detector setting.
−30 dB
−31.5 dB
−33 dB
−1.5 dB step size
−76.5 dB
DRC3 IRQ Source Ratio Between Peak and RMS. DRC peak to rms ratio
setting.
12 dB
18 dB
24 dB
30 dB
Rev. 0 | Page 231 of 296
Reset
0x0
0x00
Access
RW
RW
0x0
RW
ADAU1373
DRC3_CTRL16 REGISTER
Address: 0xAF, Reset: 0x00, Name: DRC3_CTRL16
DRC3 IRQ Enable/Disable and IRQ Source Selection Setting Register
Table 198. Bit Descriptions for DRC3_CTRL16
Bits
[7:3]
2
Bit Name
RESERVED
ALG_NGEN
Settings
0
1
1
DRCIRQ_MODE
0
1
0
DRCIRQ_EN
0
1
Description
Reserved.
Analog Noise Gate Enable.
Analog noise gate disable
Analog noise gate enable
DRC IRQ Mode. DRC IRQ source selection setting.
DRC IRQ source: rms
DRC IRQ source: Peak to rms ratio
DRC IRQ Enable Control. DRC IRQ enable/disable control.
DRC IRQ disable
DRC IRQ enable
Rev. 0 | Page 232 of 296
Reset
0x00
0x0
Access
RW
RW
0x0
RW
0x0
RW
ADAU1373
MDRC_PRE_FILTER REGISTER
Address: 0xB0, Reset: 0x00, Name: MDRC_PRE_FILTER
MDRC Low-Pass and High-Pass Filter Setting
Table 199. Bit Descriptions for MDRC_PRE_FILTER
Bits
[7:6]
[5:2]
Bit Name
RESERVED
MDRC_HPF
Settings
0000
0001
xxxx
1111
[1:0]
MDRC_LPF
00
01
10
Description
Reserved.
MDRC High-Pass Filter Cutoff Frequency.
50 Hz
100 Hz
50 Hz step size
800 Hz
MDRC Low-Pass Filter Cutoff Frequency.
4 kHz
8 kHz
20 kHz
Reset
0x0
0x0
Access
RW
RW
0x0
RW
Reset
0x0
Access
RW
0x0
RW
MDRC_SPL_CTRL (SPLITTER FREQUENCIES) REGISTER
Address: 0xB1, Reset: 0x00, Name: MDRC_SPL_CTRL
MDRC Band Splitting Crossover Frequency Setting
Table 200. Bit Descriptions for MDRC_SPL_CTRL
Bits
[7:4]
Bit Name
MDRC_CROSS_HIGH
Settings
0000
0001
xxxx
1111
[3:0]
MDRC_CROSS_LOW
0000
0001
xxxx
1111
Description
MDRC Crossover Filter High Band Frequency.
1 kHz
2 kHz
1 kHz step size
16 kHz
MDRC Crossover Filter Low Band Frequency.
100 Hz
200 Hz
100 Hz step size
1.6 kHz
Rev. 0 | Page 233 of 296
ADAU1373
MDRC_CTRL REGISTER
Address: 0xB2, Reset: 0x00, Name: MDRC_CTRL
MDRC Enable Setting
Table 201. Bit Descriptions for MDRC_CTRL
Bits
[7:3]
2
Bit Name
RESERVED
MDRC_LPFEN
Settings
0
1
1
MDRC_HPFEN
0
1
0
MDRC_EN
0
1
Description
Reserved
MDRC Low-Pass Filter Enable.
Disable
Enable
MDRC High-Pass Filter Enable.
Disable
Enable
MDRC Enable.
Disable
Enable
Reset
0x00
0x0
Access
RW
RW
0x0
RW
0x0
RW
Reset
0xFF
Access
RW
PRE_HPF1_COEFH (MSB) REGISTER
Address: 0xB3, Reset: 0xFF, Name: PRE_HPF1_COEFH
High-Pass Filter 1 Coefficient MSB
Table 202. Bit Descriptions for PRE_HPF1_COEFH
Bits
[7:0]
Bit Name
PRE_HPF1_COEFH
Settings
Description
Pre-HPF1 Coefficient[10:3].
Rev. 0 | Page 234 of 296
ADAU1373
PRE_HPF1_COEFL (LSB) REGISTER
Address: 0xB4, Reset: 0xFF, Name: PRE_HPF1_COEFL
High-Pass Filter 1 Coefficient LSB
Table 203. Bit Descriptions for PRE_HPF1_COEFL
Bits
[7:3]
[2:0]
Bit Name
RESERVED
PRE_HPF1_COEFL
Settings
Description
Reserved.
Pr-HPF1 Coefficient[2:0].
Reset
0x1F
0x7
Access
RW
RW
Reset
0xFF
Access
RW
Reset
0x1F
0x7
Access
RW
RW
PRE_HPF2_COEFH (MSB) REGISTER
Address: 0xB5, Reset: 0xFF, Name: PRE_HPF2_COEFH
High-Pass Filter 2 Coefficient MSB
Table 204. Bit Descriptions for PRE_HPF2_COEFH
Bits
[7:0]
Bit Name
PRE_HPF2_COEFH
Settings
Description
Pre-HPF2 Coefficient[10:3].
PRE_HPF2_COEFL (LSB) REGISTER
Address: 0xB6, Reset: 0xFF, Name: PRE_HPF2_COEFL
High-Pass Filter 2 Coefficient LSB
Table 205. Bit Descriptions for PRE_HPF2_COEFL
Bits
[7:3]
[2:0]
Bit Name
RESERVED
PRE_HPF2_COEFL
Settings
Description
Reserved.
Pre-HPF2 Coefficient[2:0].
Rev. 0 | Page 235 of 296
ADAU1373
PRE_HPF3_COEFH (MSB) REGISTER
Address: 0xB7, Reset: 0xFF, Name: PRE_HPF3_COEFH
High-Pass Filter 3 Coefficient MSB
Table 206. Bit Descriptions for PRE_HPF3_COEFH
Bits
[7:0]
Bit Name
PRE_HPF3_COEFH
Settings
Description
Pre-HPF3 Coefficient[10:3].
Reset
0xFF
Access
RW
Reset
0x1F
0x7
Access
RW
RW
Reset
0xFF
Access
RW
PRE_HPF3_COEFL (LSB) REGISTER
Address: 0xB8, Reset: 0xFF, Name: PRE_HPF3_COEFL
High-Pass Filter 3 Coefficient LSB
Table 207. Bit Descriptions for PRE_HPF3_COEFL
Bits
[7:3]
[2:0]
Bit Name
RESERVED
PRE_HPF3_COEFL
Settings
Description
Reserved.
Pre-HPF3 Coefficient[2:0].
PRE_HPF4_COEFH (MSB) REGISTER
Address: 0xB9, Reset: 0xFF, Name: PRE_HPF4_COEFH
High-Pass Filter 4 Coefficient MSB
Table 208. Bit Descriptions for PRE_HPF4_COEFH
Bits
[7:0]
Bit Name
PRE_HPF4_COEFH
Settings
Description
Pre-HPF4 Coefficient[10:3].
Rev. 0 | Page 236 of 296
ADAU1373
PRE_HPF4_COEFL (LSB) REGISTER
Address: 0xBA, Reset: 0xFF, Name: PRE_HPF4_COEFL
High-Pass Filter 4 Coefficient LSB
Table 209. Bit Descriptions for PRE_HPF4_COEFL
Bits
[7:3]
[2:0]
Bit Name
RESERVED
PRE_HPF4_COEFL
Settings
Description
Reserved.
Pre-HPF4 Coefficient[2:0].
Reset
0x1F
0x7
Access
RW
RW
Reset
0xFF
Access
RW
Reset
0x1F
0x7
Access
RW
RW
PRE_HPF5_COEFH (MSB) REGISTER
Address: 0xBB, Reset: 0xFF, Name: PRE_HPF5_COEFH
High-Pass Filter 5 Coefficient MSB
Table 210. Bit Descriptions for PRE_HPF5_COEFH
Bits
[7:0]
Bit Name
PRE_HPF5_COEFH
Settings
Description
Pre-HPF5 Coefficient[10:3].
PRE_HPF5_COEFL (LSB) REGISTER
Address: 0xBC, Reset: 0xFF, Name: PRE_HPF5_COEFL
High-Pass Filter 5 Coefficient LSB
Table 211. Bit Descriptions for PRE_HPF5_COEFL
Bits
[7:3]
[2:0]
Bit Name
RESERVED
PRE_HPF5_COEFL
Settings
Description
Reserved.
Pre-HPF5 Coefficient[2:0].
Rev. 0 | Page 237 of 296
ADAU1373
PRE_HPF_CTRL REGISTER
Address: 0xBD, Reset: 0x1F, Name: PRE_HPF_CTRL
High-Pass Filter 1 Through High-Pass Filter 4 Enable Control
Table 212. Bit Descriptions for PRE_HPF_CTRL
Bits
[7:5]
4
3
2
1
0
Bit Name
RESERVED
PRE_HPF5_EN
PRE_HPF4_EN
PRE_HPF3_EN
PRE_HPF2_EN
PRE_HPF1_EN
Settings
Description
Reserved.
Pre-Mix HPF5 Enable.
Pre-Mix HPF4 Enable.
Pre-Mix HPF3 Enable.
Pre-Mix HPF2 Enable.
Pre-Mix HPF1 Enable.
Rev. 0 | Page 238 of 296
Reset
0x0
0x1
0x1
0x1
0x1
0x1
Access
RW
RW
RW
RW
RW
RW
ADAU1373
EQ_CTRL1 REGISTER
Address: 0xBE, Reset: 0x00, Name: EQ_CTRL1
Equalizer Control
Table 213. Bit Descriptions for EQ_CTRL1
Bits
[7:5]
4
Bit Name
RESERVED
EQ_UPDING
Settings
0
1
3
EQ_UPD_CLR
0
1
2
EQ_FORMAT
0
1
1
EQ_UPD
1
0
0
EQ_WR_EN
1
0
Description
Reserved.
EQ Update Status.
Normal
EQ updating
EQ Update Clear. Equalizer update clear.
Normal operation
Interrupt coefficient update
EQ Coefficient Format Selection. Equalizer coefficient format selection.
Default (Q3.13)
Large gain (Q4.14)
EQ Coefficient Registers Update Flag. Equalizer coefficient registers
update status.
Update
None
EQ Coefficient Write/Read Enable. Equalizer coefficient registers update
status.
W/R enable
Disable
Rev. 0 | Page 239 of 296
Reset
0x0
0x0
Access
RW
R
0x0
R
0x0
RW
0x0
R
0x0
RW
ADAU1373
EQ_CTRL2 REGISTER
Address: 0xBF, Reset: 0x00, Name: EQ_CTRL2
Equalizer Control
Table 214. Bit Descriptions for EQ_CTRL2
Bits
7
Bit Name
EQEN
Settings
0
1
6
EQBP7
0
1
5
EQBP6
0
1
4
EQBP5
0
1
3
EQBP4
0
1
2
EQBP3
0
1
1
EQBP2
0
1
0
EQBP1
0
1
Description
EQ Enable. Equalizer enable/disable control.
EQ disable
EQ enable
EQ Band 7 Bypass When EQ Enabled. Equalizer 7 bypass control.
No bypass
Bypass EQ Band 7
EQ Band 6 Bypass When EQ Enabled. Equalizer 6 bypass control.
No bypass
Bypass EQ Band 6
EQ Band 5 Bypass When EQ Enabled. Equalizer 5 bypass control.
No bypass
Bypass EQ Band 5
EQ Band 4 Bypass When EQ Enabled. Equalizer 4 bypass control.
No bypass
Bypass EQ Band 4
EQ Band 3 Bypass When EQ Enabled. Equalizer 3 bypass control.
No bypass
Bypass EQ Band 3
EQ Band 2 Bypass When EQ Enabled. Equalizer 2 bypass control.
No bypass
Bypass EQ Band 2
EQ Band 1 Bypass When EQ Enabled. Equalizer 1 bypass control.
No bypass
Bypass EQ Band 1
Rev. 0 | Page 240 of 296
Reset
0x0
Access
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
E3D_CTRL1 REGISTER
Address: 0xC0, Reset: 0x00, Name: E3D_CTRL1
3D Enhancement Control Register
Table 215. Bit Descriptions for E3D_CTRL1
Bits
[7:4]
Bit Name
E3D_LEVEL
Settings
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
[3:0]
E3D_ALPHA
0000
0001
0010
0011
0100
0101
0110
Description
3D Enhancement Level Control. 3D effect level setting for 3D enhancement.
0%; no 3D effect
6.67%
13.33%
20%
26.67%
33.33%
40%
46.67%
53.33%
60%
66.67%
73.33%
80%
86.67%
93.33%
100%
3D Enhancement Depth Control. Filter cutoff frequency setting for 3D enhancement.
No 3D effect
1.5 kHz at 48 kHz sampling rate
2.2 kHz at 48 kHz sampling rate
3.6 kHz at 48 kHz sampling rate
5.5 kHz at 48 kHz sampling rate
8.1 kHz at 48 kHz sampling rate
13 kHz at 48 kHz sampling rate
Rev. 0 | Page 241 of 296
Reset
0x0
Access
RW
0x0
RW
ADAU1373
E3D_CTRL2 REGISTER
Address: 0xC1, Reset: 0x00, Name: E3D_CTRL2
3D Enhancement Control Register
Table 216. Bit Descriptions for E3D_CTRL2
Bits
[7:4]
[3:1]
Bit Name
RESERVED
E3D_GAIN
Settings
000
001
010
011
100
101
110
111
0
E3D_EN
0
1
Description
Reserved.
3D Enhancement Gain Setting.
E3D Gain: 1
0.125
0.25
0.375
0.5
0.625
0.75
0.875
3D Enhancement Enable. 3D enhancement enable/disable control.
Enhancement disable
Enhancement enable
Rev. 0 | Page 242 of 296
Reset
0x0
0x0
Access
RW
RW
0x0
RW
ADAU1373
ALC_CTRL0 REGISTER
Address: 0xC2, Reset: 0x00, Name: ALC_CTRL0
ALC Control Register
Table 217. Bit Descriptions for ALC_CTRL0
Bits
[7:4]
Bit Name
ALCTAV
Settings
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
[3:0]
ALCHLD
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
Description
ALC RMS Estimate Time. ALC average time setting for rms value estimation.
1.5 ms
3 ms
6 ms
12 ms
24 ms
48 ms
96 ms
192 ms
384 ms
768 ms
1.536 sec
3.072 sec
6.144 sec
ALC Hold Time. ALC recovery hold time.
0 ms
2.67 ms
5.34 ms
10.68 ms
21.36 ms
42.72 ms
85.44 ms
170.88 ms
341.76 ms
683.52 ms
1.367 sec
2.734 sec
5.468 sec
Rev. 0 | Page 243 of 296
Reset
0x0
Access
RW
0x0
RW
ADAU1373
ALC_CTRL1 REGISTER
Address: 0xC3, Reset: 0x00, Name: ALC_CTRL1
ALC Control Register
Table 218. Bit Descriptions for ALC_CTRL1
Bits
[7:4]
Bit Name
ALCATT
Settings
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
[3:0]
ALCREC
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
Description
ALC Attack Time. ALC attack time setting.
1.5 ms
3 ms
6 ms
12 ms
24 ms
48 ms
96 ms
192 ms
384 ms
768 ms
1.536 sec
3.072 sec
6.144 sec
6.144 sec
6.144 sec
6.144 sec
ALC Recovery Time. ALC recovery time setting.
6 ms
12 ms
24 ms
48 ms
96 ms
192 ms
384 ms
768 ms
1.536 sec
3.072 sec
Rev. 0 | Page 244 of 296
Reset
0x0
Access
RW
0x0
RW
ADAU1373
Bits
[3:0]
Bit Name
ALCREC
Settings
1010
1011
1100
1101
1110
1111
Description
6.144 sec
12.288 sec
24.576 sec
24.576 sec
24.576 sec
24.576 sec
Reset
Access
Reset
0x0
Access
RW
ALC_CTRL2 REGISTER
Address: 0xC4, Reset: 0x00, Name: ALC_CTRL2
ALC Control Register
Table 219. Bit Descriptions for ALC_CTRL2
Bits
[7:4]
Bit Name
ALCLVL
Settings
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
Description
ALC Peak Limiter Threshold. ALC peak limiter threshold level setting.
−22.5 dBFS
−21 dBFS
−19.5 dBFS
−18 dBFS
−16.5 dBFS
−15 dBFS
−13.5 dBFS
−12 dBFS
−10.5 dBFS
−9 dBFS
−7.5 dBFS
−6 dBFS
−4.5 dBFS
−3 dBFS
−1.5 dBFS
0 dBFS
Rev. 0 | Page 245 of 296
ADAU1373
Bits
[3:0]
Bit Name
ALCREF
Settings
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
Description
ALC Target Level. ALC reference level setting.
−24 dBFS
−22.5 dBFS
−21 dBFS
−19.5 dBFS
−18 dBFS
−16.5 dBFS
−15 dBFS
−13.5 dBFS
−12 dBFS
−10.5 dBFS
−9 dBFS
−7.5 dBFS
−6 dBFS
−4.5 dBFS
−3 dBFS
−1.5 dBFS
Reset
0x0
Access
RW
Reset
0x0
Access
RW
ALC_CTRL3 REGISTER
Address: 0xC5, Reset: 0x00, Name: ALC_CTRL3
ALC Control Register
Table 220. Bit Descriptions for ALC_CTRL3
Bits
[7:4]
Bit Name
ALCRIP
Settings
0000
0001
0010
0011
0100
0101
0110
Description
ALC Reference Ripple Remove. ALC ripple level setting. The setting, with
respect to reference level, defines the input level range in which there can
be no change in ALC gain.
0 dB
−0.5 dB
−1.0 dB
−1.5 dB
−2.0 dB
−2.5 dB
−3.0 dB
Rev. 0 | Page 246 of 296
ADAU1373
Bits
Bit Name
[3:0]
ALCMAX
Settings
0111
1000
1001
1010
1011
1100
1101
1110
1111
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
Description
−3.5 dB
−4.0 dB
−4.5 dB
−5.0 dB
−5.5 dB
−6.0 dB
−6.5 dB
−7.0 dB
−7.5 dB
ALC Maximum Gain Control. ALC maximum gain setting.
60 dB
54 dB
48 dB
42 dB
36 dB
30 dB
24 dB
18 dB
12 dB
6 dB
0 dB
−6 dB
−12 dB
ALC_CTRL4 REGISTER
Address: 0xC6, Reset: 0x00, Name: ALC_CTRL4
ALC Control Register
Rev. 0 | Page 247 of 296
Reset
Access
0x0
RW
ADAU1373
Table 221. Bit Descriptions for ALC_CTRL4
Bits
[7:4]
Bit Name
ALCNGTH
Settings
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
[3:0]
ALCNGHLD
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
Description
ALC Noise Gate Threshold. ALC noise gate threshold level setting.
−81 dBFS
−78 dBFS
−75 dBFS
−72 dBFS
−69 dBFS
−66 dBFS
−63 dBFS
−60 dBFS
−57 dBFS
−54 dBFS
−51 dBFS
−48 dBFS
−45 dBFS
−42 dBFS
−39 dBFS
−36 dBFS
ALC Noise Gate Hold Time. The ALC holds the gain for the set time when
input level is below noise gate threshold.
0 ms
2.67 ms
5.33 ms
10.67 ms
21.33 ms
42.67 ms
85.33 ms
170.67 ms
341.33 ms
682.67 ms
1.365 sec
2.730 sec
5.460 sec
Rev. 0 | Page 248 of 296
Reset
0x0
Access
RW
0x0
RW
ADAU1373
ALC_CTRL5 REGISTER
Address: 0xC7, Reset: 0x00, Name: ALC_CTRL5
ALC Control Register
Table 222. Bit Descriptions for ALC_CTRL5
Bits
[7:4]
Bit Name
ALCNGATT
Settings
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
[3:0]
ALCNGREC
0000
0001
0010
0011
0100
0101
0110
Description
ALC Noise Gate Attack Time. Valid only when NGMODE set to 10 or 11. ALC noise
gate attack time setting. This setting is valid only in Noise Gate Mode 2 and
Noise Gate Mode 3.
6 ms
12 ms
24 ms
48 ms
96 ms
192 ms
384 ms
768 ms
1.536 sec
3.072 sec
6.144 sec
12.288 sec
24.576 sec
24.576 sec
24.576 sec
24.576 sec
ALC Noise Gate Recovery Time. Valid only when NGMODE set to 11. ALC noise
gate recovery time setting. This setting is valid only in Noise Gate Mode 3.
1.5 ms
3 ms
6 ms
12 ms
24 ms
48 ms
96 ms
Rev. 0 | Page 249 of 296
Reset
0x0
Access
RW
0x0
RW
ADAU1373
Bits
Bit Name
Settings
0111
1000
1001
1010
1011
1100
1101
1110
1111
Description
192 ms
384 ms
768 ms
1.536 sec
3.072 sec
6.144 sec
6.144 sec
6.144 sec
6.144 sec
Reset
Rev. 0 | Page 250 of 296
Access
ADAU1373
ALC_CTRL6 REGISTER
Address: 0xC8, Reset: 0x00, Name: ALC_CTRL6
ALC Control Register
Table 223. Bit Descriptions for ALC_CTRL6
Bits
7
Bit Name
HLDRST
Settings
1
0
6
ALCHPF
1
0
[5:4]
NGMODE
00
01
10
11
[3:2]
ALCEN
00
01
10
11
[1:0]
ALCMODE
00
01
10
11
Description
Recovery Hold Time Counter Clear Control. Noise gate reset hold time setting.
The noise gate is not reset for the hold time set in Register 0xC6.
Hold time reset after noise gate
Hold time no reset after noise gate
ALC Embedded High-Pass Filter Enable. ALC high-pass filter enable/disable
setting. The high-pass filter is fixed at 3.7 Hz at a 48 kHz sample rate.
High-pass filter enable
High-pass filter disable
ALC Noise Gate Mode. ALC noise gate mode selection: Noise Gate Mode 1,
Noise Gate Mode 2, Noise Gate Mode 3, or disable noise gate.
No noise gate
Noise Gate Mode 1; keeps the gain before ALC enters noise gate
Noise Gate Mode 2; sets the PGA gain to 0 dB
Noise Gate Mode 3; mutes the ALC output to −120 dB
ALC Enable Control. ALC enable/disable control.
Both channels disabled
Right channel enabled
Left channel enabled
Both channels enabled
ALC Operation Mode Control. ALC can be applied to digital/analog PGA or
both by setting this register.
Control digital PGA
Control analog PGA
Control both analog/digital PGA
No use
Rev. 0 | Page 251 of 296
Reset
0x0
Access
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
FDSP_SEL1 REGISTER
Address: 0xDC, Reset: 0x00, Name: FDSP_SEL1
DSP Datapath Selection Control Register
Table 224. Bit Descriptions for FDSP_SEL1
Bits
7
[6:4]
Bit Name
RESERVED
DRC3_SEL
Settings
000
001
010
011
100
101
3
[2:0]
RESERVED
DRC2_SEL
000
001
010
011
100
101
Description
Reserved.
DRC3 Datapath Selection. EQ datapath selection.
None
Datapath 1
Datapath 2
Datapath 3
Datapath 4
Datapath 5
Reserved.
DRC2 Datapath Selection. DRC datapath selection.
None
Datapath 1
Datapath 2
Datapath 3
Datapath 4
Datapath 5
Rev. 0 | Page 252 of 296
Reset
0x0
0x0
Access
RW
RW
0x0
0x0
RW
RW
ADAU1373
FDSP_SEL2 REGISTER
Address: 0xDD, Reset: 0x00, Name: FDSP_SEL2
DSP Datapath Selection Control Register
Table 225. Bit Descriptions for FDSP_SEL2
Bits
7
[6:4]
Bit Name
RESERVED
EQ_SEL
Settings
000
001
010
011
100
101
3
[2:0]
RESERVED
DRC1_SEL
000
001
010
011
100
101
Description
Reserved.
EQ Datapath Selection.
None
Datapath 1
Datapath 2
Datapath 3
Datapath 4
Datapath 5
Reserved.
DRC1 Datapath Selection.
None
Datapath 1
Datapath 2
Datapath 3
Datapath 4
Datapath 5
Rev. 0 | Page 253 of 296
Reset
0x0
0x0
Access
RW
RW
0x0
0x0
RW
RW
ADAU1373
FDSP_SEL3 REGISTER
Address: 0xDE, Reset: 0x00, Name: FDSP_SEL3
DSP Datapath Selection Control Register
Table 226. Bit Descriptions for FDSP_SEL3
Bits
7
[6:4]
Bit Name
RESERVED
E3D_SEL
Settings
000
001
010
011
100
101
3
[2:0]
RESERVED
HPF_SEL
000
001
010
011
100
101
Description
Reserved.
E3D Datapath Selection. 3D enhancement datapath selection.
None
Datapath 1
Datapath 2
Datapath 3
Datapath 4
Datapath 5
Reserved.
High-Pass Filter Datapath Selection.
None
Datapath 1
Datapath 2
Datapath 3
Datapath 4
Datapath 5
Rev. 0 | Page 254 of 296
Reset
0x0
0x0
Access
RW
RW
0x0
0x0
RW
RW
ADAU1373
FDSP_SEL4 REGISTER
Address: 0xDF, Reset: 0x00, Name: FDSP_SEL4
DSP Datapath Selection Control Register
Table 227. Bit Descriptions for FDSP_SEL4
Bits
7
[6:4]
Bit Name
RESERVED
BASS_EN_SEL
Settings
000
001
010
011
100
101
3
ALC_4CHEN
0
1
[2:0]
ALC_SEL
000
001
010
011
100
101
Description
Reserved.
Bass Enhancement Datapath Selection.
None
Datapath 1
Datapath 2
Datapath 3
Datapath 4
Datapath 5
ALC 4 Channel Input Enable. ALC 4 channel input enable/disable control.
Disable
Enable
ALC Datapath Selection.
None
Datapath 1
Datapath 2
Datapath 3
Datapath 4
Datapath 5
Rev. 0 | Page 255 of 296
Reset
0x0
0x0
Access
RW
RW
0x0
RW
0x0
RW
ADAU1373
PBALPCTRL1 REGISTER
Address: 0xE0, Reset: 0x00, Name: PBALPCTRL1
DAC1 Playback Power Control Register
Table 228. Bit Descriptions for PBALPCTRL1
Bits
7
Bit Name
PBALPANA
Settings
0
1
[6:3]
PBALPWL
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
Description
Playback Module A Low Power Control Mode. Playback Module A low
power control mode.
Only digital
DAC and digital
Playback Module A Monitor Word Length Select. Playback Module A
monitor word length select.
18 bit (default)
17 bit
16 bit
15 bit
14 bit
13 bit
12 bit
11 bit
10 bit
9 bit
8 bit
7 bit
6 bit
5 bit
4 bit
3 bit
Rev. 0 | Page 256 of 296
Reset
0x0
Access
RW
0x0
RW
ADAU1373
Bits
[2:1]
Bit Name
PBALPMODE
Settings
00
01
10
11
0
PBALPEN
0
1
Description
Playback Module A Low Power Control Mode Channel Select. Playback
Module A low power control mode channel select.
Left channel and right channel (default)
Only left channel
Only right channel
Left channel or right channel
Playback Module A Low Power Control Mode Enable. Playback Module A
low power control mode enable.
Disable (default)
Enable
Reset
0x0
Access
RW
0x0
RW
Reset
0x0
Access
RW
0x0
RW
PBBLPCTRL2 REGISTER
Address: 0xE1, Reset: 0x00, Name: PBBLPCTRL2
DAC2 Playback Power Control Register
Table 229. Bit Descriptions for PBBLPCTRL2
Bits
7
Bit Name
PBBLPANA
Settings
0
1
[6:3]
PBBLPWL
0000
0001
0010
0011
0100
0101
0110
0111
Description
Playback Module B Low Power Control Mode. Playback Module B low
power control mode.
Digital only
Digital and DAC
Playback Module B Monitor Word Length Select. Playback Module B
monitor word length select.
18 bit (default)
17 bit
16 bit
15 bit
14 bit
13 bit
12 bit
11 bit
Rev. 0 | Page 257 of 296
ADAU1373
Bits
Bit Name
[2:1]
PBBLPMODE
Settings
1000
1001
1010
1011
1100
1101
1110
1111
00
01
10
11
0
PBBLPEN
0
1
Description
10 bit
9 bit
8 bit
7 bit
6 bit
5 bit
4 bit
3 bit
Playback Module B Low Power Control Mode Channel Select. Playback
Module B low power control mode channel select.
Left channel and right channel (default)
Only left channel
Only right channel
Left channel or right channel
Playback Module B Low Power Control Mode Enable. Playback Module B
low power control mode enable.
Disable (default)
Enable
Rev. 0 | Page 258 of 296
Reset
Access
0x0
RW
0x0
RW
ADAU1373
DIGMICCTRL REGISTER
Address: 0xE2, Reset: 0x00, Name: DIGMICCTRL
Digital Microphone Control Register
Table 230. Bit Descriptions for DIGMICCTRL
Bits
7
Bit Name
MICLRMODE
Settings
0
1
[6:4]
DMICPOLSWAP
000
001
010
011
100
101
110
111
3
DMICBLRSWAP
0
1
2
DIGMICBEN
0
1
1
DMICALRSWAP
0
1
Description
Digital Microphone 1_2 and Digital Microphone 3_4 Co-Input Working Mode.
When enabled, uses DMIC1 from DMIC1_2_DATA pin and DMIC3 from
DMIC3_4_DATA pin as two mono inputs to decimator.
Stereo input to decimator (default)
Two mono inputs to decimator
Input Data Polarity Inversion. Use to invert the input data polarity.
No change (default)
DMIC3_4_DATA left/right polarity invert
DMIC1_2_DATA left/right polarity invert
DMIC1_2_DATA left and DMIC3_4_DATA left polarity invert
DMIC3_4_DATA left polarity invert
DMIC1_2_DATA left polarity invert
DMIC1_2_DATA left/right and DMIC3_4_DATA left polarity invert
DMIC1_2_DATA left and DMIC3_4_DATA left/right polarity invert
Digital Microphone 3 and 4 Data Input Left Channel/Right Channel Swap.
No swap (default)
Swap
Enable/Disable Control for DMIC3_4_DATA Pin (Ball E6).
Disable (default)
Enable
Digital Microphone 1 and 2 Data Input Left Channel/Right Channel Swap.
No swap (default)
Swap
Rev. 0 | Page 259 of 296
Reset
0x0
Access
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
Bits
0
Bit Name
DIGMICAEN
Settings
0
1
Description
Enable/Disable Control for DMIC1_2_DATA Pin (Ball B4). Shares the
decimator with the ADC so that, when enabled, Digital Microphone 1 and 2
data is input into the decimator. The ADC output is disabled.
Disable (default)
Enable
Reset
0x0
Access
RW
Reset
0x0
Access
RW
0x0
RW
GPIOSEL1 REGISTER
Address: 0xE3, Reset: 0x00, Name: GPIOSEL1
GPIO Configuration Control Register
Table 231. Bit Descriptions for GPIOSEL1
Bits
[7:4]
Bit Name
GPIO2SEL
Settings
0000
0001
0010
0011
0100
0101
0110
[3:0]
GPIO1SEL
0000
0001
0010
0011
0100
0101
0110
Description
GPIO2 Function Select.
GPIO2 as PLL reference clock input
GPIO2 as analog 8 MHz clock output
GPIO2 as IRQ
GPIO2 as MCLK1 output
GPIO2 as MCLK2 output
GPIO2 as output high
GPIO2 as output low
GPIO1 Function Select.
GPIO1 as PLL reference clock input (default)
GPIO1 as analog 8 MHz clock output
GPIO1 as IRQ
GPIO1 as MCLK1 output
GPIO1 as MCLK2 output
GPIO1 as output high
GPIO1 as output low
Rev. 0 | Page 260 of 296
ADAU1373
GPIOSEL2 REGISTER
Address: 0xE4, Reset: 0x00, Name: GPIOSEL2
GPIO Configuration Control Register
Table 232. Bit Descriptions for GPIOSEL2
Bits
[7:4]
Bit Name
GPIO4SEL
Settings
0000
0001
0010
0011
0100
0101
0110
[3:0]
GPIO3SEL
0000
0001
0010
0011
0100
0101
0110
Description
GPIO4 Function Select.
GPIO4 as PLL reference clock input
GPIO4 as analog 8 m clk out
GPIO4 as IRQ
GPIO4 as MCLK1 out
GPIO4 as MCLK2 out
GPIO4 as output high
GPIO4 as output low
GPIO3 Function Select.
GPIO3 as PLL reference clock input (default)
GPIO3 as analog 8 m clk out
GPIO3 as IRQ
GPIO3 as MCLK1 out
GPIO3 as MCLK2 out
GPIO3 as output high
GPIO3 as output low
Rev. 0 | Page 261 of 296
Reset
0x0
Access
RW
0x0
RW
ADAU1373
IRQ_MASK REGISTER
Address: 0xE5, Reset: 0x00, Name: IRQ_MASK
Interrupt Mask Control Register
Table 233. Bit Descriptions for IRQ_MASK
Bits
7
Bit Name
ASRCC_IRQ_MASK
Settings
0
1
6
ASRCB_IRQ_MASK
0
1
5
ASRCA_IRQ_MASK
0
1
4
DRC_IRQ_MASK
0
1
3
PLL_UNLOCK_MASK
0
1
2
HP_CFG_MASK
0
1
1
HP_DECT_MASK
0
1
0
AFAULT_MASK
0
1
Description
Mask the IRQ of ASRCC. Interrupt mask setting for ASRCC.
Mask (default)
No mask
Mask the IRQ of ASRCB. Interrupt mask setting for ASRCB.
Mask (default)
No mask
Mask the IRQ of ASRCA. Interrupt mask setting for ASRCA.
Mask (default)
No mask
Mask the IRQ of DRC IRQ. Interrupt mask setting for DRC IRQ.
Mask (default)
No mask
Mask the IRQ of PLL_UNLOCK. Interrupt mask setting for PLL unlock.
Mask (default)
No mask
Mask the IRQ of Headphone Setting Change. Interrupt mask setting for
headphone setting change.
Mask (default)
No mask
Mask the IRQ of Headphone Detect. Interrupt mask setting for
headphone fault.
Mask (default)
No mask
Mask the IRQ of Analog Fault. Interrupt mask setting for analog fault.
Mask (default)
No mask
Rev. 0 | Page 262 of 296
Reset
0x0
Access
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
IRQ_RAW REGISTER
Address: 0xE6, Reset: 0x02, Name: IRQ_RAW
Interrupt Status Register
Table 234. Bit Descriptions for IRQ_RAW
Bits
7
Bit Name
ASRCC_IRQ_RAW_STATE
Settings
0
1
6
ASRCB_IRQ_RAW_STATE
0
1
5
ASRCA_IRQ_RAW_STATE
0
1
4
DRC_IRQ_RAW_STATE
0
1
3
PLL_UNLOCK_RAW_STATE
0
1
2
HP_CFG_RAW_STATE
0
1
1
HP_DECT_RAW_STATE
0
1
0
AFAULT_RAW_STATE
0
1
Description
Raw State of ASRCC_IRQ. Raw status of ASRCC.
Normal
Fault
Raw State of ASRCB_IRQ. Raw status of ASRCB.
Normal
Fault
Raw State of ASRCA_IRQ. Raw status of ASRCA.
Normal
Fault
Raw State of DRC_IRQ. Raw status of DRC IRQ.
Normal
ADC clip
Raw State of PLL_UNLOCK. Raw status of PLL unlock.
Normal
Unlock
Raw State of Headphone Setting Change. Raw status of
headphone setting fault.
Normal
Changed
Raw State of Headphone Detect. Raw status of headphone fault.
Normal
Changed
Raw State of Analog Fault. Raw status of analog fault.
Normal
Fault
Rev. 0 | Page 263 of 296
Reset
0x0
Access
R
0x0
R
0x0
R
0x0
R
0x0
R
0x0
R
0x1
R
0x0
R
ADAU1373
IRQ_STATE (AFTER MASK) REGISTER
Address: 0xE7, Reset: 0x00, Name: IRQ_STATE
Interrupt Request State Register
Table 235. Bit Descriptions for IRQ_STATE
Bits
7
Bit Name
ASRCC_IRQ_STATUS
Settings
0
1
6
ASRCB_IRQ_STATUS
0
1
5
ASRCA_IRQ_STATUS
0
1
4
DRC_IRQ_STATUS
0
1
3
PLL_UNLOCK_STATUS
0
1
2
HP_CFG_STATUS
0
1
1
HP_DECT_STATUS
0
1
0
AFAULT_STATUS
0
1
Description
ASRCC_IRQ State After Mask. ASRCC interrupt.
Normal
Fault
ASRCB_IRQ State After Mask. ASRCB interrupt.
Normal
Fault
ASRCA_IRQ State After Mask. ASRCA interrupt.
Normal
Fault
DRC IRQ State After Mask. DRC interrupt.
Normal
Fault
PLL_UNLOCK IRQ State After Mask. PLL unlock interrupt.
Normal
Fault
Headphone Setting Change IRQ State After Mask. Headphone setting
change interrupt.
Normal
Changed
Headphone Detect IRQ State After Mask. Headphone fault interrupt.
Normal
Changed
Analog Fault IRQ State After Mask. Analog fault interrupt.
Normal
Fault
Rev. 0 | Page 264 of 296
Reset
0x0
Access
R
0x0
R
0x0
R
0x0
R
0x0
R
0x0
R
0x0
R
0x0
R
ADAU1373
IRQEN REGISTER
Address: 0xE8, Reset: 0x00, Name: IRQEN
Interrupt Request Enable/Disable Register
Table 236. Bit Descriptions for IRQEN
Bits
[7:1]
0
Bit Name
RESERVED
IRQEN
Settings
0
1
Description
Reserved.
Interrupt Gen Enable. Interrupt request enable/disable control.
Disable (default)
Enable
Reset
0x0
0x0
Access
RW
RW
Reset
0x0
0x0
Access
RW
RW
0x1
RW
PAD_CTRL1 REGISTER
Address: 0xE9, Reset: 0x1F, Name: PAD_CTRL1
Pin Drive Capability Control Register
Table 237. Bit Descriptions for PAD_CTRL1
Bits
[7:6]
5
Bit Name
RESERVED
I2CFILTER_BYPASS
Settings
0
1
4
I2CDRV
0
1
Description
Reserved.
I2C Pad Filter Bypass. I2C pad filter enable/disable control.
Using I2C filter (default)
Bypass
Driving ability of I2C. Driving ability setting for I2C clock and data.
Low
High (default)
Rev. 0 | Page 265 of 296
ADAU1373
Bits
3
Bit Name
DMICCLKDRV
Settings
0
1
2
CDRV
0
1
1
BDRV
0
1
0
ADRV
0
1
Description
Driving Ability of DMIC CLOCK. Driving ability setting for digital
microphone clock.
Low
High (default)
Driving Ability of Audio Interface C. Driving ability setting of Audio Interface C.
Low
High (default)
Driving Ability of Audio Interface B. Driving ability setting of Audio Interface B.
Low
High (default)
Driving Ability of Audio Interface A. Driving ability setting of Audio Interface A.
Low
High (default)
Reset
0x1
Access
RW
0x1
RW
0x1
RW
0x1
RW
Reset
0x0
0x1
Access
RW
RW
0x1
RW
0x1
RW
0x1
RW
PAD_CTRL2 REGISTER
Address: 0xEA, Reset: 0x0F, Name: PAD_CTRL2
Pin Drive Capability Control Register
Table 238. Bit Descriptions for PAD_CTRL2
Bits
[7:4]
3
Bit Name
RESERVED
GPIO4DRV
Settings
0
1
2
GPIO3DRV
0
1
1
GPIO2DRV
0
1
0
GPIO1DRV
0
1
Description
Reserved.
Driving Ability of GPIO4. Driving ability setting for GPIO4.
Low
High (default)
Driving Ability of GPIO3. Driving ability setting for GPIO3.
Low
High (default)
Driving Ability of GPIO2. Driving ability setting for GPIO2.
Low
High (default)
Driving Ability of GPIO1. Driving ability setting for GPIO1.
Low
High (default)
Rev. 0 | Page 266 of 296
ADAU1373
DIGEN REGISTER
Address: 0xEB, Reset: 0x00, Name: DIGEN
Pin Drive Capability Control Register
Table 239. Bit Descriptions for DIGEN
Bits
[7:5]
4
Bit Name
RESERVED
FDSPEN
Settings
0
1
3
DRECEN
0
1
2
RECEN
0
1
1
PBBEN
0
1
0
PBAEN
0
1
Description
Reserved.
FDSP Engine Enable.
Disable (default)
Enable
Digital Microphone Recording Engine Enable. Used to enable the Digital
Microphone 3 and 4 data (DMIC3_4_DATA pin) to DSP.
Disable (default)
Enable
Codec Recording Engine Enable. Used to enable the codec recording
engine or Digital Microphone 1 and 2 data (DMIC1_2_DATA pin) to DSP.
Disable (default)
Enable
Codec Playback Engine B Enable.
Disable (default)
Enable
Codec Playback Engine A Enable.
Disable (default)
Enable
Rev. 0 | Page 267 of 296
Reset
0x0
0x0
Access
RW
RW
0x0
RW
0x0
RW
0x0
RW
0x0
RW
ADAU1373
LPCNTCTRL (LOW POWER CONTROL COUNTER) REGISTER
Address: 0xEC, Reset: 0x00, Name: LPCNTCTRL
Low Power Control Counter
Table 240. Bit Descriptions for LPCNTCTRL
Bits
[7:4]
Bit Name
LPC_B_CNT
Settings
0000
0001
0010
0011
0100
0101
0110
0111
[3:0]
LPC_A_CNT
0000
0001
0010
0011
0100
0101
0110
0111
Description
Low Power Control B Counter.
256 samples
512 samples
1024 samples
2048 samples
4096 samples
8192 samples
16384 samples
32768 samples
Low Power Control A Counter.
256 samples
512 samples
1024 samples
2048 samples
4096 samples
8192 samples
16384 samples
32768 samples
Reset
0x0
Access
RW
0x0
RW
Reset
0x13
Access
R
CHIP_ID_HI REGISTER
Address: 0xED, Reset: 0x13, Name: CHIP_ID_HI
Chip Identification Register High Byte
Table 241. Bit Descriptions for CHIP_ID_HI
Bits
[7:0]
Bit Name
CHIP_ID_HI
Settings
00010011
Description
Chip ID for ADAU1373_REVB. Chip identification register high byte.
13 (first two digits of the part number)
Rev. 0 | Page 268 of 296
ADAU1373
CHIP_ID_MID REGISTER
Address: 0xEE, Reset: 0x73, Name: CHIP_ID_MID
Chip Identification Register Middle Byte
Table 242. Bit Descriptions for CHIP_ID_MID
Bits
[7:0]
Bit Name
CHIP_ID_MID
Settings
01110011
Description
Chip ID for ADAU1373_REVB. Chip Identification register middle byte.
73 (last two digits of the part number)
Reset
0x73
Access
R
Reset
0x0B
Access
R
Reset
0x00
Access
RW
CHIP_ID_LOW REGISTER
Address: 0xEF, Reset: 0x0B, Name: CHIP_ID_LO
Chip Identification Register Low Byte
Table 243. Bit Descriptions for CHIP_ID_LO
Bits
[7:0]
Bit Name
CHIP_ID_LOW
Settings
00001011
Description
Chip ID for ADAU1373_REVB. Chip identification register lower byte.
0B (die revision)
SOFT_RESET REGISTER
Address: 0xFF, Reset: 0x00, Name: SOFT_RESET
Software Reset Register
Table 244. Bit Descriptions for SOFT_RESET
Bits
[7:0]
Bit Name
SOFT_RST
Settings
Description
Software Reset Register. Write 0x00 to reset all registers.
Rev. 0 | Page 269 of 296
ADAU1373
REGISTER MAP—EQ COEFFICIENTS
Table 245 shows the register map for seven-band EQ coefficients. Register 0x80 through Register 0xBD should be used for programming
the EQ coefficients. Register addresses are in hexadecimal format.
Table 245. EQ Register Summary
Reg.
0x80
0x81
0x82
0x83
0x84
0x85
0x86
0x87
0x88
0x89
0x8A
0x8B
0x8C
0x8D
0x8E
0x8F
0x90
0x91
0x92
0x93
0x94
0x95
0x96
0x97
0x98
0x99
0x9A
0x9B
0x9C
0x9D
0x9E
0x9F
0xA0
0xA1
0xA2
0xA3
0xA4
0xA5
0xA6
0xA7
0xA8
0xA9
0xAA
0xAB
0xAC
0xAD
0xAE
0xAF
0xB0
0xB1
0xB2
0xB3
0xB4
0xB5
0xB6
0xB7
Name
EQ1_COEF0_HI
EQ1_COEF0_LO
EQ1_COEF1_HI
EQ1_COEF1_LO
EQ1_COEF2_HI
EQ1_COEF2_LO
EQ1_COEF3_HI
EQ1_COEF3_LO
EQ1_COEF4_HI
EQ1_COEF4_LO
EQ2_COEF0_HI
EQ2_COEF0_LO
EQ2_COEF1_HI
EQ2_COEF1_LO
EQ2_COEF2_HI
EQ2_COEF2_LO
EQ2_COEF3_HI
EQ2_COEF3_LO
EQ2_COEF4_HI
EQ2_COEF4_LO
EQ3_COEF0_HI
EQ3_COEF0_LO
EQ3_COEF1_HI
EQ3_COEF1_LO
EQ3_COEF2_HI
EQ3_COEF2_LO
EQ3_COEF3_HI
EQ3_COEF3_LO
EQ3_COEF4_HI
EQ3_COEF4_LO
EQ4_COEF0_HI
EQ4_COEF0_LO
EQ4_COEF1_HI
EQ4_COEF1_LO
EQ4_COEF2_HI
EQ4_COEF2_LO
EQ4_COEF3_HI
EQ4_COEF3_LO
EQ4_COEF4_HI
EQ4_COEF4_LO
EQ5_COEF0_HI
EQ5_COEF0_LO
EQ5_COEF1_HI
EQ5_COEF1_LO
EQ5_COEF2_HI
EQ5_COEF2_LO
EQ5_COEF3_HI
EQ5_COEF3_LO
EQ5_COEF4_HI
EQ5_COEF4_LO
EQ6_COEF0_HI
EQ6_COEF0_LO
EQ6_COEF1_HI
EQ6_COEF1_LO
EQ6_COEF2_HI
EQ6_COEF2_LO
Bits
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
EQ1_COEF0_HI
EQ1_COEF0_LO
EQ1_COEF1_HI
EQ1_COEF1_LO
EQ1_COEF2_HI
EQ1_COEF2_LO
EQ1_COEF3_HI
EQ1_COEF3_LO
EQ1_COEF4_HI
EQ1_COEF4_LO
EQ2_COEF0_HI
EQ2_COEF0_LO
EQ2_COEF1_HI
EQ2_COEF1_LO
EQ2_COEF2_HI
EQ2_COEF2_LO
EQ2_COEF3_HI
EQ2_COEF3_LO
EQ2_COEF4_HI
EQ2_COEF4_LO
EQ3_COEF0_HI
EQ3_COEF0_LO
EQ3_COEF1_HI
EQ3_COEF1_LO
EQ3_COEF2_HI
EQ3_COEF2_LO
EQ3_COEF3_HI
EQ3_COEF3_LO
EQ3_COEF4_HI
EQ3_COEF4_LO
EQ4_COEF0_HI
EQ4_COEF0_LO
EQ4_COEF1_HI
EQ4_COEF1_LO
EQ4_COEF2_HI
EQ4_COEF2_LO
EQ4_COEF3_HI
EQ4_COEF3_LO
EQ4_COEF4_HI
EQ4_COEF4_LO
EQ5_COEF0_HI
EQ5_COEF0_LO
EQ5_COEF1_HI
EQ5_COEF1_LO
EQ5_COEF2_HI
EQ5_COEF2_LO
EQ5_COEF3_HI
EQ5_COEF3_LO
EQ5_COEF4_HI
EQ5_COEF4_LO
EQ6_COEF0_HI
EQ6_COEF0_LO
EQ6_COEF1_HI
EQ6_COEF1_LO
EQ6_COEF2_HI
EQ6_COEF2_LO
Rev. 0 | Page 270 of 296
Bit 2
Bit 1
Bit 0
Reset
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
MMRW
MMRW
MMRW
MMRW
MMRW
MMRW
MMRW
MMRW
MMRW
MMRW
MMRW
MMRW
MMRW
MMRW
MMRW
MMRW
MMRW
MMRW
MMRW
MMRW
MMRW
MMRW
MMRW
MMRW
MMRW
MMRW
MMRW
MMRW
MMRW
MMRW
MMRW
ADAU1373
Reg.
0xB8
0xB9
0xBA
0xBB
0xBC
0xBD
Name
EQ7_COEF0_HI
EQ7_COEF0_LO
EQ7_COEF1_HI
EQ7_COEF1_LO
EQ7_COEF2_HI
EQ7_COEF2_LO
Bits
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
EQ7_COEF0_HI
EQ7_COEF0_LO
EQ7_COEF1_HI
EQ7_COEF1_LO
EQ7_COEF2_HI
EQ7_COEF2_LO
Bit 2
Bit 1
Bit 0
Reset
0x00
0x00
0x00
0x00
0x00
0x00
RW
MMRW
MMRW
MMRW
MMRW
MMRW
MMRW
EQ1_COEF0_HI REGISTER
Address: 0x80, Reset: 0x00, Name: EQ1_COEF0_HI
Equalizer 1 Coefficient 0 Upper Byte
Table 246. Bit Descriptions for EQ1_COEF0_HI
Bits
[7:0]
Bit Name
EQ1_COEF0_HI
Settings
Description
EQ1 Coefficient. Equalizer 1 Coefficient 0 Upper Byte.
Reset
0x00
Access
RW
Reset
0x00
Access
RW
Reset
0x00
Access
RW
EQ1_COEF0_LO REGISTER
Address: 0x81, Reset: 0x00, Name: EQ1_COEF0_LO
Equalizer 1 Coefficient 0 Lower Byte
Table 247. Bit Descriptions for EQ1_COEF0_LO
Bits
[7:0]
Bit Name
EQ1_COEF0_LO
Settings
Description
EQ1 Coefficient. Equalizer 1 Coefficient 0 Lower Byte.
EQ1_COEF1_HI REGISTER
Address: 0x82, Reset: 0x00, Name: EQ1_COEF1_HI
Equalizer 1 Coefficient 1 Upper Byte
Table 248. Bit Descriptions for EQ1_COEF1_HI
Bits
[7:0]
Bit Name
EQ1_COEF1_HI
Settings
Description
EQ1 Coefficient. Equalizer 1 Coefficient 1 Upper Byte.
Rev. 0 | Page 271 of 296
ADAU1373
EQ1_COEF1_LO REGISTER
Address: 0x83, Reset: 0x00, Name: EQ1_COEF1_LO
Equalizer 1 Coefficient 1 Lower Byte
Table 249. Bit Descriptions for EQ1_COEF1_LO
Bits
[7:0]
Bit Name
EQ1_COEF1_LO
Settings
Description
EQ1 Coefficient. Equalizer 1 Coefficient 1 Lower Byte.
Reset
0x00
Access
RW
Reset
0x00
Access
RW
Reset
0x00
Access
RW
EQ1_COEF2_HI REGISTER
Address: 0x84, Reset: 0x00, Name: EQ1_COEF2_HI
Equalizer 1 Coefficient 2 Upper Byte
Table 250. Bit Descriptions for EQ1_COEF2_HI
Bits
[7:0]
Bit Name
EQ1_COEF2_HI
Settings
Description
EQ1 Coefficient. Equalizer 1 Coefficient 2 Upper Byte.
EQ1_COEF2_LO REGISTER
Address: 0x85, Reset: 0x00, Name: EQ1_COEF2_LO
Equalizer 1 Coefficient 2 Lower Byte
Table 251. Bit Descriptions for EQ1_COEF2_LO
Bits
[7:0]
Bit Name
EQ1_COEF2_LO
Settings
Description
EQ1 Coefficient. Equalizer 1 Coefficient 2 Lower Byte.
Rev. 0 | Page 272 of 296
ADAU1373
EQ1_COEF3_HI REGISTER
Address: 0x86, Reset: 0x00, Name: EQ1_COEF3_HI
Equalizer 1 Coefficient 3 Upper Byte
Table 252. Bit Descriptions for EQ1_COEF3_HI
Bits
[7:0]
Bit Name
EQ1_COEF3_HI
Settings
Description
EQ1 Coefficient. Equalizer 1 Coefficient 3 Upper Byte.
Reset
0x00
Access
RW
Reset
0x00
Access
RW
Reset
0x00
Access
RW
EQ1_COEF3_LO REGISTER
Address: 0x87, Reset: 0x00, Name: EQ1_COEF3_LO
Equalizer 1 Coefficient 3 Lower Byte
Table 253. Bit Descriptions for EQ1_COEF3_LO
Bits
[7:0]
Bit Name
EQ1_COEF3_LO
Settings
Description
EQ1 Coefficient. Equalizer 1 Coefficient 3 Lower Byte.
EQ1_COEF4_HI REGISTER
Address: 0x88, Reset: 0x00, Name: EQ1_COEF4_HI
Equalizer 1 Coefficient 4 Upper Byte
Table 254. Bit Descriptions for EQ1_COEF4_HI
Bits
[7:0]
Bit Name
EQ1_COEF4_HI
Settings
Description
EQ1 Coefficient. Equalizer 1 Coefficient 4 Upper Byte.
Rev. 0 | Page 273 of 296
ADAU1373
EQ1_COEF4_LO REGISTER
Address: 0x89, Reset: 0x00, Name: EQ1_COEF4_LO
Equalizer 1 Coefficient 4 Lower Byte
Table 255. Bit Descriptions for EQ1_COEF4_LO
Bits
[7:0]
Bit Name
EQ1_COEF4_LO
Settings
Description
EQ1 Coefficient. Equalizer 1 Coefficient 4 Lower Byte.
Reset
0x00
Access
RW
Reset
0x00
Access
RW
Reset
0x00
Access
RW
EQ2_COEF0_HI REGISTER
Address: 0x8A, Reset: 0x00, Name: EQ2_COEF0_HI
Equalizer 2 Coefficient 0 Upper Byte
Table 256. Bit Descriptions for EQ2_COEF0_HI
Bits
[7:0]
Bit Name
EQ2_COEF0_HI
Settings
Description
EQ2 Coefficient. Equalizer 2 Coefficient 0 Upper Byte.
EQ2_COEF0_LO REGISTER
Address: 0x8B, Reset: 0x00, Name: EQ2_COEF0_LO
Equalizer 2 Coefficient 0 Lower Byte
Table 257. Bit Descriptions for EQ2_COEF0_LO
Bits
[7:0]
Bit Name
EQ2_COEF0_LO
Settings
Description
EQ2 Coefficient. Equalizer 2 Coefficient 0 Lower Byte.
Rev. 0 | Page 274 of 296
ADAU1373
EQ2_COEF1_HI REGISTER
Address: 0x8C, Reset: 0x00, Name: EQ2_COEF1_HI
Equalizer 2 Coefficient 1 Upper Byte
Table 258. Bit Descriptions for EQ2_COEF1_HI
Bits
[7:0]
Bit Name
EQ2_COEF1_HI
Settings
Description
EQ2 Coefficient. Equalizer 2 Coefficient 1 Upper Byte.
Reset
0x00
Access
RW
Reset
0x00
Access
RW
Reset
0x00
Access
RW
EQ2_COEF1_LO REGISTER
Address: 0x8D, Reset: 0x00, Name: EQ2_COEF1_LO
Equalizer 2 Coefficient 1 Lower Byte
Table 259. Bit Descriptions for EQ2_COEF1_LO
Bits
[7:0]
Bit Name
EQ2_COEF1_LO
Settings
Description
EQ2 Coefficient. Equalizer 2 Coefficient 1 Lower Byte.
EQ2_COEF2_HI REGISTER
Address: 0x8E, Reset: 0x00, Name: EQ2_COEF2_HI
Equalizer 2 Coefficient 2 Upper Byte
Table 260. Bit Descriptions for EQ2_COEF2_HI
Bits
[7:0]
Bit Name
EQ2_COEF2_HI
Settings
Description
EQ2 Coefficient. Equalizer 2 Coefficient 2 Upper Byte.
Rev. 0 | Page 275 of 296
ADAU1373
EQ2_COEF2_LO REGISTER
Address: 0x8F, Reset: 0x00, Name: EQ2_COEF2_LO
Equalizer 2 Coefficient 2 Lower Byte
Table 261. Bit Descriptions for EQ2_COEF2_LO
Bits
[7:0]
Bit Name
EQ2_COEF2_LO
Settings
Description
EQ2 Coefficient. Equalizer 2 Coefficient 2 Lower Byte.
Reset
0x00
Access
RW
Reset
0x00
Access
RW
Reset
0x00
Access
RW
EQ2_COEF3_HI REGISTER
Address: 0x90, Reset: 0x00, Name: EQ2_COEF3_HI
Equalizer 2 Coefficient 3 Upper Byte
Table 262. Bit Descriptions for EQ2_COEF3_HI
Bits
[7:0]
Bit Name
EQ2_COEF3_HI
Settings
Description
EQ2 Coefficient. Equalizer 2 Coefficient 3 Upper Byte.
EQ2_COEF3_LO REGISTER
Address: 0x91, Reset: 0x00, Name: EQ2_COEF3_LO
Equalizer 2 Coefficient 3 Lower Byte
Table 263. Bit Descriptions for EQ2_COEF3_LO
Bits
[7:0]
Bit Name
EQ2_COEF3_LO
Settings
Description
EQ2 Coefficient. Equalizer 2 Coefficient 3 Lower Byte.
Rev. 0 | Page 276 of 296
ADAU1373
EQ2_COEF4_HI REGISTER
Address: 0x92, Reset: 0x00, Name: EQ2_COEF4_HI
Equalizer 2 Coefficient 4 Upper Byte
Table 264. Bit Descriptions for EQ2_COEF4_HI
Bits
[7:0]
Bit Name
EQ2_COEF4_HI
Settings
Description
EQ2 Coefficient. Equalizer 2 Coefficient 4 Upper Byte.
Reset
0x00
Access
RW
Reset
0x00
Access
RW
Reset
0x00
Access
RW
EQ2_COEF4_LO REGISTER
Address: 0x93, Reset: 0x00, Name: EQ2_COEF4_LO
Equalizer 2 Coefficient 4 Lower Byte
Table 265. Bit Descriptions for EQ2_COEF4_LO
Bits
[7:0]
Bit Name
EQ2_COEF4_LO
Settings
Description
EQ2 Coefficient. Equalizer 2 Coefficient 4 Lower Byte.
EQ3_COEF0_HI REGISTER
Address: 0x94, Reset: 0x00, Name: EQ3_COEF0_HI
Equalizer 3 Coefficient 0 Upper Byte
Table 266. Bit Descriptions for EQ3_COEF0_HI
Bits
[7:0]
Bit Name
EQ3_COEF0_HI
Settings
Description
EQ3 Coefficient. Equalizer 3 Coefficient 0 Upper Byte.
Rev. 0 | Page 277 of 296
ADAU1373
EQ3_COEF0_LO REGISTER
Address: 0x95, Reset: 0x00, Name: EQ3_COEF0_LO
Equalizer 3 Coefficient 0 Lower Byte
Table 267. Bit Descriptions for EQ3_COEF0_LO
Bits
[7:0]
Bit Name
EQ3_COEF0_LO
Settings
Description
EQ3 Coefficient. Equalizer 3 Coefficient 0 Lower Byte.
Reset
0x00
Access
RW
Reset
0x00
Access
RW
Reset
0x00
Access
RW
EQ3_COEF1_HI REGISTER
Address: 0x96, Reset: 0x00, Name: EQ3_COEF1_HI
Equalizer 3 Coefficient 1 Upper Byte
Table 268. Bit Descriptions for EQ3_COEF1_HI
Bits
[7:0]
Bit Name
EQ3_COEF1_HI
Settings
Description
EQ3 Coefficient. Equalizer 3 Coefficient 1 Upper Byte.
EQ3_COEF1_LO REGISTER
Address: 0x97, Reset: 0x00, Name: EQ3_COEF1_LO
Equalizer 3 Coefficient 1 Lower Byte
Table 269. Bit Descriptions for EQ3_COEF1_LO
Bits
[7:0]
Bit Name
EQ3_COEF1_LO
Settings
Description
EQ3 Coefficient. Equalizer 3 Coefficient 1 Lower Byte.
Rev. 0 | Page 278 of 296
ADAU1373
EQ3_COEF2_HI REGISTER
Address: 0x98, Reset: 0x00, Name: EQ3_COEF2_HI
Equalizer 3 Coefficient 2 Upper Byte
Table 270. Bit Descriptions for EQ3_COEF2_HI
Bits
[7:0]
Bit Name
EQ3_COEF2_HI
Settings
Description
EQ3 Coefficient. Equalizer 3 Coefficient 2 Upper Byte.
Reset
0x00
Access
RW
Reset
0x00
Access
RW
Reset
0x00
Access
RW
EQ3_COEF2_LO REGISTER
Address: 0x99, Reset: 0x00, Name: EQ3_COEF2_LO
Equalizer 3 Coefficient 2 Lower Byte
Table 271. Bit Descriptions for EQ3_COEF2_LO
Bits
[7:0]
Bit Name
EQ3_COEF2_LO
Settings
Description
EQ3 Coefficient. Equalizer 3 Coefficient 2 Lower Byte.
EQ3_COEF3_HI REGISTER
Address: 0x9A, Reset: 0x00, Name: EQ3_COEF3_HI
Equalizer 3 Coefficient 3 Upper Byte
Table 272. Bit Descriptions for EQ3_COEF3_HI
Bits
[7:0]
Bit Name
EQ3_COEF3_HI
Settings
Description
EQ3 Coefficient. Equalizer 3 Coefficient 3 Upper Byte.
Rev. 0 | Page 279 of 296
ADAU1373
EQ3_COEF3_LO REGISTER
Address: 0x9B, Reset: 0x00, Name: EQ3_COEF3_LO
Equalizer 3 Coefficient 3 Lower Byte
Table 273. Bit Descriptions for EQ3_COEF3_LO
Bits
[7:0]
Bit Name
EQ3_COEF3_LO
Settings
Description
EQ3 Coefficient. Equalizer 3 Coefficient 3 Lower Byte.
Reset
0x00
Access
RW
Reset
0x00
Access
RW
Reset
0x00
Access
RW
EQ3_COEF4_HI REGISTER
Address: 0x9C, Reset: 0x00, Name: EQ3_COEF4_HI
Equalizer 3 Coefficient 4 Upper Byte
Table 274. Bit Descriptions for EQ3_COEF4_HI
Bits
[7:0]
Bit Name
EQ3_COEF4_HI
Settings
Description
EQ3 Coefficient. Equalizer 3 Coefficient 4 Upper Byte.
EQ3_COEF4_LO REGISTER
Address: 0x9D, Reset: 0x00, Name: EQ3_COEF4_LO
Equalizer 3 Coefficient 4 Lower Byte
Table 275. Bit Descriptions for EQ3_COEF4_LO
Bits
[7:0]
Bit Name
EQ3_COEF4_LO
Settings
Description
EQ3 Coefficient. Equalizer 3 Coefficient 4 Lower Byte.
Rev. 0 | Page 280 of 296
ADAU1373
EQ4_COEF0_HI REGISTER
Address: 0x9E, Reset: 0x00, Name: EQ4_COEF0_HI
Equalizer 4 Coefficient 0 Upper Byte
Table 276. Bit Descriptions for EQ4_COEF0_HI
Bits
[7:0]
Bit Name
EQ4_COEF0_HI
Settings
Description
EQ4 Coefficient. Equalizer 4 Coefficient 0 Upper Byte.
Reset
0x00
Access
RW
Reset
0x00
Access
RW
Reset
0x00
Access
RW
EQ4_COEF0_LO REGISTER
Address: 0x9F, Reset: 0x00, Name: EQ4_COEF0_LO
Equalizer 4 Coefficient 0 Lower Byte
Table 277. Bit Descriptions for EQ4_COEF0_LO
Bits
[7:0]
Bit Name
EQ4_COEF0_LO
Settings
Description
EQ4 Coefficient. Equalizer 4 Coefficient 0 Lower Byte.
EQ4_COEF1_HI REGISTER
Address: 0xA0, Reset: 0x00, Name: EQ4_COEF1_HI
Equalizer 4 Coefficient 1 Upper Byte
Table 278. Bit Descriptions for EQ4_COEF1_HI
Bits
[7:0]
Bit Name
EQ4_COEF1_HI
Settings
Description
EQ4 Coefficient. Equalizer 4 Coefficient 1 Upper Byte.
Rev. 0 | Page 281 of 296
ADAU1373
EQ4_COEF1_LO REGISTER
Address: 0xA1, Reset: 0x00, Name: EQ4_COEF1_LO
Equalizer 4 Coefficient 1 Lower Byte
Table 279. Bit Descriptions for EQ4_COEF1_LO
Bits
[7:0]
Bit Name
EQ4_COEF1_LO
Settings
Description
EQ4 Coefficient. Equalizer 4 Coefficient 1 Lower Byte.
Reset
0x00
Access
RW
Reset
0x00
Access
RW
Reset
0x00
Access
RW
EQ4_COEF2_HI REGISTER
Address: 0xA2, Reset: 0x00, Name: EQ4_COEF2_HI
Equalizer 4 Coefficient 2 Upper Byte
Table 280. Bit Descriptions for EQ4_COEF2_HI
Bits
[7:0]
Bit Name
EQ4_COEF2_HI
Settings
Description
EQ4 Coefficient. Equalizer 4 Coefficient 2 Upper Byte.
EQ4_COEF2_LO REGISTER
Address: 0xA3, Reset: 0x00, Name: EQ4_COEF2_LO
Equalizer 4 Coefficient 2 Lower Byte
Table 281. Bit Descriptions for EQ4_COEF2_LO
Bits
[7:0]
Bit Name
EQ4_COEF2_LO
Settings
Description
EQ4 Coefficient. Equalizer 4 Coefficient 2 Lower Byte.
Rev. 0 | Page 282 of 296
ADAU1373
EQ4_COEF3_HI REGISTER
Address: 0xA4, Reset: 0x00, Name: EQ4_COEF3_HI
Equalizer 4 Coefficient 3 Upper Byte
Table 282. Bit Descriptions for EQ4_COEF3_HI
Bits
[7:0]
Bit Name
EQ4_COEF3_HI
Settings
Description
EQ4 Coefficient. Equalizer 4 Coefficient 3 Upper Byte.
Reset
0x00
Access
RW
Reset
0x00
Access
RW
Reset
0x00
Access
RW
EQ4_COEF3_LO REGISTER
Address: 0xA5, Reset: 0x00, Name: EQ4_COEF3_LO
Equalizer 4 Coefficient 3 Lower Byte
Table 283. Bit Descriptions for EQ4_COEF3_LO
Bits
[7:0]
Bit Name
EQ4_COEF3_LO
Settings
Description
EQ4 Coefficient. Equalizer 4 Coefficient 3 Lower Byte.
EQ4_COEF4_HI REGISTER
Address: 0xA6, Reset: 0x00, Name: EQ4_COEF4_HI
Equalizer 4 Coefficient 4 Upper Byte
Table 284. Bit Descriptions for EQ4_COEF4_HI
Bits
[7:0]
Bit Name
EQ4_COEF4_HI
Settings
Description
EQ4 Coefficient. Equalizer 4 Coefficient 4 Upper Byte.
Rev. 0 | Page 283 of 296
ADAU1373
EQ4_COEF4_LO REGISTER
Address: 0xA7, Reset: 0x00, Name: EQ4_COEF4_LO
Equalizer 4 Coefficient 4 Lower Byte
Table 285. Bit Descriptions for EQ4_COEF4_LO
Bits
[7:0]
Bit Name
EQ4_COEF4_LO
Settings
Description
EQ4 Coefficient. Equalizer 4 Coefficient 4 Lower Byte.
Reset
0x00
Access
RW
Reset
0x00
Access
RW
Reset
0x00
Access
RW
EQ5_COEF0_HI REGISTER
Address: 0xA8, Reset: 0x00, Name: EQ5_COEF0_HI
Equalizer 5 Coefficient 0 Upper Byte
Table 286. Bit Descriptions for EQ5_COEF0_HI
Bits
[7:0]
Bit Name
EQ5_COEF0_HI
Settings
Description
EQ5 Coefficient. Equalizer 5 Coefficient 0 Upper Byte.
EQ5_COEF0_LO REGISTER
Address: 0xA9, Reset: 0x00, Name: EQ5_COEF0_LO
Equalizer 5 Coefficient 0 Lower Byte
Table 287. Bit Descriptions for EQ5_COEF0_LO
Bits
[7:0]
Bit Name
EQ5_COEF0_LO
Settings
Description
EQ5 Coefficient. Equalizer 5 Coefficient 0 Lower Byte.
Rev. 0 | Page 284 of 296
ADAU1373
EQ5_COEF1_HI REGISTER
Address: 0xAA, Reset: 0x00, Name: EQ5_COEF1_HI
Equalizer 5 Coefficient 1 Upper Byte
Table 288. Bit Descriptions for EQ5_COEF1_HI
Bits
[7:0]
Bit Name
EQ5_COEF1_HI
Settings
Description
EQ5 Coefficient. Equalizer 5 Coefficient 1 Upper Byte.
Reset
0x00
Access
RW
Reset
0x00
Access
RW
Reset
0x00
Access
RW
EQ5_COEF1_LO REGISTER
Address: 0xAB, Reset: 0x00, Name: EQ5_COEF1_LO
Equalizer 5 Coefficient 1 Lower Byte
Table 289. Bit Descriptions for EQ5_COEF1_LO
Bits
[7:0]
Bit Name
EQ5_COEF1_LO
Settings
Description
EQ5 Coefficient. Equalizer 5 Coefficient 1 Lower Byte.
EQ5_COEF2_HI REGISTER
Address: 0xAC, Reset: 0x00, Name: EQ5_COEF2_HI
Equalizer 5 Coefficient 2 Upper Byte
Table 290. Bit Descriptions for EQ5_COEF2_HI
Bits
[7:0]
Bit Name
EQ5_COEF2_HI
Settings
Description
EQ5 Coefficient. Equalizer 5 Coefficient 2 Upper Byte.
Rev. 0 | Page 285 of 296
ADAU1373
EQ5_COEF2_LO REGISTER
Address: 0xAD, Reset: 0x00, Name: EQ5_COEF2_LO
Equalizer 5 Coefficient 2 Lower Byte
Table 291. Bit Descriptions for EQ5_COEF2_LO
Bits
[7:0]
Bit Name
EQ5_COEF2_LO
Settings
Description
EQ5 Coefficient. Equalizer 5 Coefficient 2 Lower Byte.
Reset
0x00
Access
RW
Reset
0x00
Access
RW
Reset
0x00
Access
RW
EQ5_COEF3_HI REGISTER
Address: 0xAE, Reset: 0x00, Name: EQ5_COEF3_HI
Equalizer 5 Coefficient 3 Upper Byte
Table 292. Bit Descriptions for EQ5_COEF3_HI
Bits
[7:0]
Bit Name
EQ5_COEF3_HI
Settings
Description
EQ5 Coefficient. Equalizer 5 Coefficient 3 Upper Byte.
EQ5_COEF3_LO REGISTER
Address: 0xAF, Reset: 0x00, Name: EQ5_COEF3_LO
Equalizer 5 Coefficient 3 Lower Byte
Table 293. Bit Descriptions for EQ5_COEF3_LO
Bits
[7:0]
Bit Name
EQ5_COEF3_LO
Settings
Description
EQ5 Coefficient. Equalizer 5 Coefficient 3 Lower Byte.
Rev. 0 | Page 286 of 296
ADAU1373
EQ5_COEF4_HI REGISTER
Address: 0xB0, Reset: 0x00, Name: EQ5_COEF4_HI
Equalizer 5 Coefficient 4 Upper Byte
Table 294. Bit Descriptions for EQ5_COEF4_HI
Bits
[7:0]
Bit Name
EQ5_COEF4_HI
Settings
Description
EQ5 Coefficient. Equalizer 5 Coefficient 4 Upper Byte.
Reset
0x00
Access
RW
Reset
0x00
Access
RW
Reset
0x00
Access
RW
EQ5_COEF4_LO REGISTER
Address: 0xB1, Reset: 0x00, Name: EQ5_COEF4_LO
Equalizer 5 Coefficient 4 Lower Byte
Table 295. Bit Descriptions for EQ5_COEF4_LO
Bits
[7:0]
Bit Name
EQ5_COEF4_LO
Settings
Description
EQ5 Coefficient. Equalizer 5 Coefficient 4 Lower Byte.
EQ6_COEF0_HI REGISTER
Address: 0xB2, Reset: 0x00, Name: EQ6_COEF0_HI
Equalizer 6 Coefficient 0 Upper Byte
Table 296. Bit Descriptions for EQ6_COEF0_HI
Bits
[7:0]
Bit Name
EQ6_COEF0_HI
Settings
Description
EQ6 Coefficient. Equalizer 6 Coefficient 0 Upper Byte.
Rev. 0 | Page 287 of 296
ADAU1373
EQ6_COEF0_LO REGISTER
Address: 0xB3, Reset: 0x00, Name: EQ6_COEF0_LO
Equalizer 6 Coefficient 0 Lower Byte
Table 297. Bit Descriptions for EQ6_COEF0_LO
Bits
[7:0]
Bit Name
EQ6_COEF0_LO
Settings
Description
EQ6 Coefficient. Equalizer 6 Coefficient 0 Lower Byte.
Reset
0x00
Access
RW
Reset
0x00
Access
RW
Reset
0x00
Access
RW
EQ6_COEF1_HI REGISTER
Address: 0xB4, Reset: 0x00, Name: EQ6_COEF1_HI
Equalizer 6 Coefficient 1 Upper Byte
Table 298. Bit Descriptions for EQ6_COEF1_HI
Bits
[7:0]
Bit Name
EQ6_COEF1_HI
Settings
Description
EQ6 Coefficient. Equalizer 6 Coefficient 1 Upper Byte.
EQ6_COEF1_LO REGISTER
Address: 0xB5, Reset: 0x00, Name: EQ6_COEF1_LO
Equalizer 6 Coefficient 1 Lower Byte
Table 299. Bit Descriptions for EQ6_COEF1_LO
Bits
[7:0]
Bit Name
EQ6_COEF1_LO
Settings
Description
EQ6 Coefficient. Equalizer 6 Coefficient 1 Lower Byte.
Rev. 0 | Page 288 of 296
ADAU1373
EQ6_COEF2_HI REGISTER
Address: 0xB6, Reset: 0x00, Name: EQ6_COEF2_HI
Equalizer 6 Coefficient 2 Upper Byte
Table 300. Bit Descriptions for EQ6_COEF2_HI
Bits
[7:0]
Bit Name
EQ6_COEF2_HI
Settings
Description
EQ6 Coefficient. Equalizer 6 Coefficient 2 Upper Byte.
Reset
0x00
Access
RW
Reset
0x00
Access
RW
Reset
0x00
Access
RW
EQ6_COEF2_LO REGISTER
Address: 0xB7, Reset: 0x00, Name: EQ6_COEF2_LO
Equalizer 6 Coefficient 2 Lower Byte
Table 301. Bit Descriptions for EQ6_COEF2_LO
Bits
[7:0]
Bit Name
EQ6_COEF2_LO
Settings
Description
EQ6 Coefficient. Equalizer 6 Coefficient 2 Lower Byte.
EQ7_COEF0_HI REGISTER
Address: 0xB8, Reset: 0x00, Name: EQ7_COEF0_HI
Equalizer 7 Coefficient 0 Upper Byte
Table 302. Bit Descriptions for EQ7_COEF0_HI
Bits
[7:0]
Bit Name
EQ7_COEF0_HI
Settings
Description
EQ7 Coefficient. Equalizer 7 Coefficient 0 Upper Byte.
Rev. 0 | Page 289 of 296
ADAU1373
EQ7_COEF0_LO REGISTER
Address: 0xB9, Reset: 0x00, Name: EQ7_COEF0_LO
Equalizer 7 Coefficient 0 Lower Byte
Table 303. Bit Descriptions for EQ7_COEF0_LO
Bits
[7:0]
Bit Name
EQ7_COEF0_LO
Settings
Description
EQ7 Coefficient. Equalizer 7 Coefficient 0 Lower Byte.
Reset
0x00
Access
RW
Reset
0x00
Access
RW
Reset
0x00
Access
RW
EQ7_COEF1_HI REGISTER
Address: 0xBA, Reset: 0x00, Name: EQ7_COEF1_HI
Equalizer 7 Coefficient 1 Upper Byte
Table 304. Bit Descriptions for EQ7_COEF1_HI
Bits
[7:0]
Bit Name
EQ7_COEF1_HI
Settings
Description
EQ7 Coefficient. Equalizer 7 Coefficient 1 Upper Byte.
EQ7_COEF1_LO REGISTER
Address: 0xBB, Reset: 0x00, Name: EQ7_COEF1_LO
Equalizer 7 Coefficient 1 Lower Byte
Table 305. Bit Descriptions for EQ7_COEF1_LO
Bits
[7:0]
Bit Name
EQ7_COEF1_LO
Settings
Description
EQ7 Coefficient. Equalizer 7 Coefficient 1 Lower Byte.
Rev. 0 | Page 290 of 296
ADAU1373
EQ7_COEF2_HI REGISTER
Address: 0xBC, Reset: 0x00, Name: EQ7_COEF2_HI
Equalizer 7 Coefficient 2 Upper Byte
Table 306. Bit Descriptions for EQ7_COEF2_HI
Bits
[7:0]
Bit Name
EQ7_COEF2_HI
Settings
Description
EQ7 Coefficient. Equalizer 7 Coefficient 2 Upper Byte.
Reset
0x00
Access
RW
Reset
0x00
Access
RW
EQ7_COEF2_LO REGISTER
Address: 0xBD, Reset: 0x00, Name: EQ7_COEF2_LO
Equalizer 7 Coefficient 2 Lower Byte
Table 307. Bit Descriptions for EQ7_COEF2_LO
Bits
[7:0]
Bit Name
EQ7_COEF2_LO
Settings
Description
EQ7 Coefficient. Equalizer 7 Coefficient 2 Lower Byte.
Rev. 0 | Page 291 of 296
ADAU1373
APPLICATIONS CIRCUIT
0.1µF
10µF
BATTERY
1µF
FM
1µF
–
+
–
L
R
0.1µF
IOVDD4
DMIC1_2_DATA
DMIC3_4_DATA
AIN3P
AIN3N
MICBIAS2
(1.8V TO 2.8V, 0.2V STEP)
AIN2N
2kΩ
2.2µF
EXTERNAL
MICROPHONE
AIN4P
AIN2P
2.2µF
AIN4N
AIN1L
HPL
AIN1R
HPR
IOVDD3 (1.8V TO 3.3V)
EARPHONE
SGND
GPIO4
BT
INTERNAL
DIGITAL
MICROPHONE
DMIC_CLK
CONNECTOR
22nF
DVDD
(1.08V TO 2.0V)
22nF
AVDD
(1.5V TO 1.8V)
22nF +
INTERNAL
ANALOG
MICROPHONE
2.2µF
DVDD
MICBIAS1
(1.8V TO 2.8V, 0.2V STEP)
2kΩ
22nF
HPVDD
(1.62V TO 2.0V)
2kΩ
SPKVDD
(2.5V TO 5.5V)
CM
RESERVED
1µF
2.2µF
2.2µF
HPVDD AVDD
JACKDET
BCLKC
2.2µF
CPVDD
LRCLKC
CF1
SDATAOUTC
CF2
SDATAINC
2.2µF
2.2µF
CPVSS
IOVDD2 (1.8V TO 3.3V)
GPIO2
EPP
ADAU1373
RECEIVER
EPN
BCLKB
AP
SPKLP
LRCLKB
SDATAOUTB
BEAD 2
SDATAINB
SPKRP
MCLK21
RIGHT
SPEAKER
SPKRN
IOVDD1 (1.8V TO 3.3V)
LOUT1L/
LOUTLP
GPIO1
MCLK11
BB
LEFT
SPEAKER
SPKLN
LOUT1R/
LOUTRP
BCLKA
LOUT2L/
LOUTLN
LRCLKA
SDATAOUTA
LOUT2R/
LOUTRN
SDATAINA
1µF
1µF
1µF
1µF
DOCKING
2.2µF
LN1FBIN
IOVDD5 (1.8V TO 3.3V)
2.2µF
GPIO3
EXCEED 4 INCHES.
THE OUTPUT SPEAKER TRACE PLUS THE CABLE LENGTH
Figure 123. Typical Stereo Class-D Applications Circuit
Rev. 0 | Page 292 of 296
08975-109
1SELECT EITHER MCLK1 OR MCLK2 BY CONTROL.
2REQUIRED FOR EMI SENSITIVE APPLICATIONS WHERE
DGND
SD
AGND
SDA
HPGND
SCL
SPKGND
BB OR AP
LN2FBIN
ADAU1373
OUTLINE DIMENSIONS
4.085
4.045
4.005
9
8
7
6
5
4
3
2
1
A
B
BALL A1
IDENTIFIER
C
3.860
3.820
3.780
3.20
BSC SQ
D
E
F
G
H
0.40
BALL PITCH
TOP VIEW
(BALL SIDE DOWN)
SEATING
PLANE
SIDE VIEW
(BALL SIDE UP)
0.330
0.300
0.270
COPLANARITY
0.05
0.300
0.260
0.220
0.230
0.200
0.170
02-01-2010-A
0.560
0.500
0.440
J
BOTTOM VIEW
Figure 124. 81-Ball Wafer Level Chip Scale Package [WLCSP]
(CB-81-1)
Dimensions shown in millimeters
ORDERING GUIDE
Model 1
ADAU1373BCBZ-R7
ADAU1373BCBZ-RL
EVAL-ADAU1373Z
1
Temperature Range
−40°C to +85°C
−40°C to +85°C
Package Description
81-Ball WLCSP
81-Ball WLCSP
Evaluation Board
Z = RoHS Compliant Part.
Rev. 0 | Page 293 of 296
Package Option
CB-81-1
CB-81-1
ADAU1373
NOTES
Rev. 0 | Page 294 of 296
ADAU1373
NOTES
Rev. 0 | Page 295 of 296
ADAU1373
NOTES
I2C refers to a communications protocol originally developed by Philips Semiconductors (now NXP Semiconductors).
©2011 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D08975-0-5/11(0)
Rev. 0 | Page 296 of 296
Similar pages