ASW204 5 ~ 8000 MHz MMIC Amplifier Features Description 18 dB Gain at 2000 MHz The ASW204, a power amplifier MMIC, has a high linearity, high gain, and high efficiency over a wide range of frequency, being suitable for use in both receiver and transmitter of telecommunication systems up to 8 GHz. The amplifier is available in a SOT89 package and passes through the stringent DC, RF, and reliability tests. 21 dBm P1dB at 2000 MHz 32.5 dBm OIP3 at 2000 MHz 1.75 dB NF at 2000 MHz MTTF > 100 Years Single Supply ASW204 Package Style: SOT89 Typical Performance (Supply Voltage = +5 V, TA = +25 C, Z0 = 50 ) Application Circuit Parameters Units Typical Frequency MHz 900 2000 2700 3500 5500 Gain dB 19.8 18.0 16.7 15.0 12.8 500 ~ 3500 MHz S11 dB -13 -14 -18 -15 -7 S22 dB -13 -12 -10 -10 -14 SMATV, DVB-S (50 ) Output IP31) dBm 32.0 32.5 32.5 28.0 28.0 Noise Figure dB 1.65 1.75 2.00 2.30 2.90 Output P1dB dBm 21 21 20 17 15 Current mA 55 55 55 55 55 Device Voltage V +5 +5 +5 +5 +5 1) OIP3 is measured with two tones at an output power of +5 dBm/tone separated by 1 MHz. SMATV(75 ) - 950 ~ 2150 MHz - 200 ~ 2600 MHz 500 ~ 3500 MHz (5.3 V) IF (50 ~ 450 MHz) 500 ~ 6000 MHz (Flat Gain) Product Specifications Min Typ Max 5000 ~ 6000 MHz Parameters Units Testing Frequency MHz 2000 500 ~ 2700 MHz (3.3 V/ 35 mA) Gain dB 18 S11 dB -14 40 ~ 2400 MHz S22 dB -12 Output IP3 dBm 32.5 Noise Figure dB 1.75 Output P1dB dBm 21 Current mA 55 Device Voltage V +5 Pin Configuration Absolute Maximum Ratings Parameters Rating Operating Case Temperature -40 to 85 C Storage Temperature -40 to 150 C Device Voltage +6 V Operating Junction Temperature +150 C Pin No. Function Input RF Power (Continuous) +22 dBm 1 RF IN Thermal Resistance 98 C/W 2 GND 3 RF OUT & Bias Please find the max. input power data from http://www.asb.co.kr/pdf/Maximum_Input_Power_Analysis.pdf 1/16 ASB Inc. [email protected] Tel: +82-42-528-7225 April 2017 ASW204 5 ~ 8000 MHz MMIC Amplifier Outline Drawing Part No. Lot No. Symbols A L b b1 C D D1 E E1 e1 H S e ASW204 Pxxxx Dimensions (In mm) MIN NOM 1.40 1.50 0.89 1.04 0.36 0.42 0.41 0.47 0.38 0.40 4.40 4.50 1.40 1.60 3.64 --2.40 2.50 2.90 3.00 0.35 0.40 0.65 0.75 1.40 1.50 Pin No. Function 1 RF IN 2 GND 3 RF OUT & Bias MAX 1.60 1.20 0.48 0.53 0.43 4.60 1.75 4.25 2.60 3.10 0.45 0.85 1.60 Mounting Recommendation (In mm) Note: 1. The number and size of ground via holes in a circuit board is critical for thermal and RF grounding considerations. 2. We recommend that the ground via holes be placed on the bottom of the lead pin 2 and exposed pad of the device for better RF and thermal performance, as shown in the drawing at the left side. ESD Classification & Moisture Sensitivity Level ESD Classification HBM Class 1B Voltage Level: 550 V MM Class A Voltage Level: 50 V CAUTION: ESD-sensitive device! Moisture Sensitivity Level (MSL) Level 3 at 260 C reflow 2/16 ASB Inc. [email protected] Tel: +82-42-528-7225 April 2017 ASW204 5 ~ 8000 MHz MMIC Amplifier APPLICATION CIRCUIT Wide Band 500 ~ 3500 MHz +5 V Frequency (MHz) 900 2000 2700 3500 Magnitude S21 (dB) 19.8 18.0 16.7 15.0 Magnitude S11 (dB) -13 -14 -18 -15 Magnitude S22 (dB) -13 -12 -10 -10 Output P1dB (dBm) 21 21 20 17 Output IP31) (dBm) 32.0 32.5 32.5 28.0 Noise Figure (dB) 1.65 1.75 2.00 2.30 Device Voltage (V) +5 +5 +5 +5 Current (mA) 55 55 55 55 1) OIP3 is measured with two tones at an output power of +5 dBm/tone separated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic Vcc=5 V C4=1 F C3=100 pF L1=33 nH C1=56 pF RF IN C2=56 pF RF OUT ASW204 L2=33 nH S-parameters & K-factor 25 0 -5 20 o -40 c o 25 c o 85 c -10 10 o -40 c o 25 c o 85 c 5 0 S11 (dB) Gain (dB) 15 -15 -20 -25 0 500 1000 1500 2000 2500 3000 3500 -30 0 500 1000 Frequency (MHz) 0 5 -5 4 -15 o -40 c o 25 c o 85 c -20 2000 2500 3000 3500 3 2 1 0 500 1000 1500 2000 Frequency (MHz) 3/16 Stability Factor S22 (dB) -10 -25 1500 Frequency (MHz) 2500 3000 3500 0 0 500 1000 1500 2000 2500 3000 3500 Frequency (MHz) ASB Inc. [email protected] Tel: +82-42-528-7225 April 2017 ASW204 5 ~ 8000 MHz MMIC Amplifier Gain vs. Temperature Current vs. Temperature 120 22 100 20 18 Gain (dB) Current (mA) 80 60 16 40 Frequency = 2000 MHz Frequency = 2000 MHz 20 0 -60 -40 -20 0 20 40 60 80 14 12 -60 100 -40 -20 0 o 28 45 26 40 80 100 35 Output IP3 (dBm) P1dB (dBm) 60 Output IP3 vs. Tone Power (Frequency=2000 MHz) 24 22 20 Frequency = 2000 MHz 18 30 25 o -40 c o 25 c o 85 c 20 15 -40 -20 0 20 40 60 80 100 10 2 3 4 5 o 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Pout per Tone (dBm) Temperature ( C) 4/16 40 Temperature ( C) P1dB vs. Temperature 16 -60 20 o Temperature ( C) ASB Inc. [email protected] Tel: +82-42-528-7225 April 2017 ASW204 5 ~ 8000 MHz MMIC Amplifier LTE ACLR – 10 MHz & 20 MHz -40 ACLR (dBc) -45 -50 20 MHz BW -55 10 MHz BW -60 -65 -70 0 2 4 6 8 Output Power (dBm) 10 12 1) Test Source : LTE_FDD_test model 3.1, BW: 10 MHz & 20 MHz, Test Frequency: 2.6 GHz LTE ACLR – 20 MHz 2) Test Source : LTE_FDD_test model 3.1, BW: 20 MHz, Test Frequency: 2.6 GHz 5/16 ASB Inc. [email protected] Tel: +82-42-528-7225 April 2017 ASW204 5 ~ 8000 MHz MMIC Amplifier Frequency (MHz) 950 2150 Magnitude S21 (dB) 19.8 17.7 Magnitude S11 (dB) -14 -12 SMATV. DVB-S Magnitude S22 (dB) -13 -11 (50 ) Output P1dB (dBm) 21.5 22.5 Output IP31) (dBm) 32 31 950 ~ 2150 MHz Noise Figure (dB) 1.7 1.8 +5 V Device Voltage (V) +5 +5 Current (mA) 55 55 APPLICATION CIRCUIT 1) OIP3 is measured with two tones at an output power of +5 dBm/tone separated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic Vcc=5 V C4=1 F C3=100 pF L1=33 nH C1=56 pF RF IN C2=56 pF RF OUT ASW204 L2=33 nH 25 0 20 -5 15 -10 S11 (dB) Gain (dB) S-parameters & K-factor 10 5 0 -15 -20 0 500 1000 1500 2000 2500 -25 0 500 1000 Frequency (MHz) 5 -5 4 Stability Factor 0 S22 (dB) -10 -15 -20 -25 2000 2500 3 2 1 0 500 1000 1500 2000 2500 0 0 500 Frequency (MHz) 6/16 1500 Frequency (MHz) 1000 1500 2000 2500 3000 3500 Frequency (MHz) ASB Inc. [email protected] Tel: +82-42-528-7225 April 2017 ASW204 5 ~ 8000 MHz MMIC Amplifier APPLICATION CIRCUIT SMATV(75 ) 950 ~ 2150 MHz +5 V Frequency (MHz) 950 2150 Magnitude S21 (dB) 19.7 17.6 Magnitude S11 (dB) -13 -16 Magnitude S22 (dB) -8.5 -10 Output P1dB (dBm) 22 22 Output IP31) (dBm) 33.0 32.5 Noise Figure (dB) 1.7 1.8 Device Voltage (V) +5 +5 Current (mA) 55 55 1) OIP3 is measured with two tones at an output power of +5 dBm/tone separated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic Vcc=5 V C4=1 F C3=100 pF L1=33 nH C1=56 pF RF IN C2=56 pF RF OUT ASW204 L2=82 nH S-parameters & K-factor 0 25 20 15 S11 (dB) Gain (dB) -5 10 -10 -15 5 0 0 500 1000 1500 2000 -20 2500 0 500 Frequency (MHz) 1000 1500 2000 2500 Frequency (MHz) 0 10 9 -5 8 Stability Factor 7 S22 (dB) -10 -15 -20 6 5 4 3 2 1 -25 0 500 1000 1500 2000 2500 0 0 500 Frequency (MHz) 7/16 1000 1500 2000 2500 3000 Frequency [MHz] ASB Inc. [email protected] Tel: +82-42-528-7225 April 2017 ASW204 5 ~ 8000 MHz MMIC Amplifier APPLICATION CIRCUIT SMATV(75 ) 200 ~ 2600 MHz +5 V Frequency (MHz) 200 950 2150 2600 Magnitude S21 (dB) 21.0 20.0 17.3 16.6 Magnitude S11 (dB) -20 -13 -18 -20 Magnitude S22 (dB) -7.0 -8.0 -9.0 -9.0 Output P1dB (dBm) 22 21 21 20 Output IP31) (dBm) 29 33 32 31 Noise Figure (dB) 1.8 1.3 1.6 1.8 Device Voltage (V) +5 +5 +5 +5 Current (mA) 55 55 55 55 1) OIP3 is measured with two tones at an output power of +5 dBm/tone separated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic 30 0 25 -5 20 -10 S11 (dB) Gain (dB) S-parameters & K-factor 15 -15 10 -20 5 -25 0 0 500 1000 1500 2000 2500 -30 3000 0 500 1000 Frequency (MHz) 1500 2000 2500 3000 Frequency (MHz) 0 10 9 -5 8 Stability Factor 7 S22 (dB) -10 -15 -20 6 5 4 3 2 1 -25 0 0 500 1000 1500 2000 2500 3000 0 500 1000 8/16 1500 2000 2500 3000 Frequency [MHz] Frequency (MHz) ASB Inc. [email protected] Tel: +82-42-528-7225 April 2017 ASW204 5 ~ 8000 MHz MMIC Amplifier APPLICATION CIRCUIT Wide Band 500 ~ 3500 MHz +5.3 V Frequency (MHz) 900 2000 2700 3500 Magnitude S21 (dB) 20.2 18.3 17.0 15.2 Magnitude S11 (dB) -15 -15 -20 -15 Magnitude S22 (dB) -12 -12 -10 -10 Output P1dB (dBm) 22.5 22.5 21.5 17.0 Output IP31) (dBm) 34.5 34.0 33.5 29.5 Noise Figure (dB) 1.7 1.8 2.0 2.4 Device Voltage (V) +5.3 +5.3 +5.3 +5.3 Current (mA) 75 75 75 75 1) OIP3 is measured with two tones at an output power of +5 dBm/tone separated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic Vcc=5.3 V C4=1 F C3=100 pF L1=33 nH C1=56 pF RF IN C2=56 pF RF OUT ASW204 L2=33 nH 25 0 20 -5 15 -10 S11 (dB) Gain (dB) S-parameters & K-factor 10 5 0 -15 -20 0 500 1000 1500 2000 2500 3000 3500 -25 0 500 1000 Frequency (MHz) 5 -5 4 Stability Factor 0 S22 (dB) -10 -15 -20 -25 2000 2500 3000 3500 2500 3000 3500 3 2 1 0 500 1000 1500 2000 2500 3000 3500 0 0 500 Frequency (MHz) 9/16 1500 Frequency (MHz) 1000 1500 2000 Frequency (MHz) ASB Inc. [email protected] Tel: +82-42-528-7225 April 2017 ASW204 5 ~ 8000 MHz MMIC Amplifier Frequency (MHz) 70 150 300 Magnitude S21 (dB) 22.5 21.0 20.0 Magnitude S11 (dB) -5 -8 -10 Magnitude S22 (dB) -15 -15 -15 IF Output P1dB (dBm) 21.5 21.5 21.5 50 ~ 450 MHz Output IP31) (dBm) 29.5 29.5 31.0 Noise Figure (dB) 1.9 1.6 2.0 Device Voltage (V) +5 +5 +5 Current (mA) 55 55 55 APPLICATION CIRCUIT +5 V 1) OIP3 is measured with two tones at an output power of +5 dBm/tone separated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic Vcc=5 V C4=1 F C3=100 pF L1=1 C1=0.1 F RF IN C2=0.1 F RF OUT ASW204 L2=680 nH S-parameters & K-factor 30 0 25 -5 S11 (dB) Gain (dB) 20 15 -10 10 -15 5 0 0 100 200 300 400 500 -20 0 100 200 Frequency (MHz) 5 -5 4 Stability Factor 0 S22 (dB) -10 -15 -20 -25 400 500 3 2 1 0 100 200 300 400 500 0 0 500 Frequency (MHz) 10/16 300 Frequency (MHz) 1000 1500 2000 2500 3000 3500 Frequency (MHz) ASB Inc. [email protected] Tel: +82-42-528-7225 April 2017 ASW204 5 ~ 8000 MHz MMIC Amplifier APPLICATION CIRCUIT Flat Gain 500 ~ 6000 MHz +5 V Frequency (MHz) 500 2000 4000 6000 Magnitude S21 (dB) 16.1 15.2 15.2 11.4 Magnitude S11 (dB) -13 -11 -15 -8 Magnitude S22 (dB) -6 -6 -8 -4 Output P1dB (dBm) 21.0 21.0 13.5 8.5 Output IP3* (dBm) 32(1) 33(1) 23.5(2) 19.5(3) Noise Figure (dB) 2.8 2.2 2.9 3.3 Device Voltage (V) +5 +5 +5 +5 Current (mA) 55 55 55 55 1) OIP3 is measured with two tones at an output power of +5(1) / +0(2) / -5(3) dBm/tone separated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic Vcc=5 V C5=1 F C4=100 pF L1=27 nH C1=56 pF RF IN C2=56 pF RF OUT ASW204 L2=27 nH R1=560 C3=86 pF 20 0 15 -5 S11 (dB) Gain (dB) S-parameters & K-factor 10 5 -10 -15 0 -20 0 1000 2000 3000 4000 5000 6000 7000 0 1000 2000 Frequency (MHz) 0 4000 5000 6000 7000 2500 3000 3500 5 4 Stability Factor -5 S22 (dB) 3000 Frequency (MHz) -10 3 2 -15 1 -20 0 1000 2000 3000 4000 5000 6000 7000 0 0 500 Frequency (MHz) 11/16 1000 1500 2000 Frequency (MHz) ASB Inc. [email protected] Tel: +82-42-528-7225 April 2017 ASW204 5 ~ 8000 MHz MMIC Amplifier APPLICATION CIRCUIT WLAN 5000 ~ 6000 MHz +5 V Frequency (MHz) 5000 5500 6000 Magnitude S21 (dB) 13.2 12.8 12.0 Magnitude S11 (dB) -7 -7 -7 Magnitude S22 (dB) -10 -14 -15 Output P1dB (dBm) 15.0 15.0 14.5 Output IP31) (dBm) 27.0 28.0 25.5 Noise Figure (dB) 2.9 2.9 3.1 Device Voltage (V) +5 +5 +5 Device Current (mA) 55 55 55 1) OIP3 is measured with two tones at an output power of +0 dBm/tone separated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic Vcc=5 V C4=1 F C3=100 pF L1=5.6 nH C1=10 pF RF IN C2=10 pF RF OUT ASW204 L2=12 nH 20 0 15 -5 S11 (dB) Gain (dB) S-parameters & K-factor 10 5 0 4000 -10 -15 4500 5000 5500 6000 6500 7000 -20 4000 4500 5000 Frequency (MHz) 5500 6000 6500 7000 Frequency (MHz) 5 0 4 Stability Factor S22 (dB) -5 -10 3 2 -15 1 -20 4000 0 4500 5000 5500 6000 6500 7000 0 500 12/16 1000 1500 2000 2500 3000 3500 Frequency (MHz) Frequency (MHz) ASB Inc. [email protected] Tel: +82-42-528-7225 April 2017 ASW204 5 ~ 8000 MHz MMIC Amplifier APPLICATION CIRCUIT Wide Band Frequency (MHz) 900 2000 Magnitude S21 (dB) 18.5 16.3 Magnitude S11 (dB) -11 -10 Magnitude S22 (dB) -15 -11 Output P1dB (dBm) 17.5 18.0 500 ~ 2700 MHz Output IP31) (dBm) 27.5 28.0 +3.3 V/ 35 mA Noise Figure (dB) 1.7 1.8 Device Voltage (V) +3.3 +3.3 Current (mA) 35 35 1) OIP3 is measured with two tones at an output power of +3 dBm/tone separated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic Vsupply=+3.3 V C4=1 F C3=100 pF R1=12 k L1=33 nH C1=56 pF RF IN C2=56 pF RF OUT ASW204 L2=33 nH S-parameters & K-factor 0 25 20 15 S11 (dB) Gain (dB) -5 10 -10 -15 5 0 0 300 600 900 1200 1500 1800 2100 2400 2700 -20 0 300 600 900 Frequency (MHz) 5 -5 4 Stability Factor 0 S22 (dB) -10 -15 1800 2100 2400 2700 3 2 0 0 300 600 900 1200 1500 1800 2100 2400 2700 0 500 1000 1500 2000 2500 3000 3500 Frequency [MHz] Frequency (MHz) 13/16 1500 1 -20 -25 1200 Frequency (MHz) ASB Inc. [email protected] Tel: +82-42-528-7225 April 2017 ASW204 5 ~ 8000 MHz MMIC Amplifier APPLICATION CIRCUIT 40 ~ 2400 MHz +5 V Frequency (MHz) 40 1200 2400 Magnitude S21 (dB) 19.3 17.0 16.2 Magnitude S11 (dB) -9 -15 -16 Magnitude S22 (dB) -8 -7 -11 Output P1dB (dBm) 21.5 23.0 22.5 Output IP31) (dBm) 27.0 33.5 33.0 Noise Figure (dB) 3.6 2.2 2.4 Device Voltage (V) +5 +5 +5 Current (mA) 55 55 55 1) OIP3 is measured with two tones at an output power of +0 dBm/tone separated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic Vdevice=+5 V C5=1 F C4=100 pF L1=270 nH C2=1 F C1=1 F RF IN RF OUT ASW204 R1=680 C3=1 F 25 0 20 -5 15 -10 S11 (dB) Gain (dB) S-parameters & K-factor 10 5 -15 -20 0 -25 0 500 1000 1500 Frequency (MHz) 2000 2500 0 0 2000 2500 4 Stability Factor S22 (dB) 1000 1500 Frequency (MHz) 5 -5 -10 -15 3 2 1 -20 0 0 14/16 500 500 1000 1500 Frequency (MHz) 2000 2500 0 500 ASB Inc. [email protected] Tel: +82-42-528-7225 1000 1500 2000 Frequency (MHz) 2500 3000 April 2017 ASW204 5 ~ 8000 MHz MMIC Amplifier Performance with varying VDEVICE 15/16 VDEVICE (V) Current (mA) +5.3 75 +5.0 55 +4.8 43 +4.65 35 Freq. (MHz) Gain (dB) S11 (dB) S22 (dB) OIP3 (dBm) P1dB (dBm) NF (dB) 900 20.4 -16.9 -12.6 34.7 23.2 1.64 2000 18.5 -17.0 -12.2 34.8 22.9 1.71 900 20.0 -15.2 -14.4 32.5 22.0 1.59 2000 18.2 -15.2 -12.7 33.0 22.1 1.68 900 19.5 -13.0 -15.1 30.2 21.2 1.59 2000 17.8 -13.7 -13.0 31.1 21.5 1.67 900 19.0 -12.7 -15.5 28.5 21.0 1.60 2000 17.4 -11.2 -13.4 28.1 22.1 1.66 ASB Inc. [email protected] Tel: +82-42-528-7225 April 2017 ASW204 5 ~ 8000 MHz MMIC Amplifier Recommended Soldering Reflow Profile 260 C Ramp-up (3 C/sec) 20~40 sec Ramp-down (6 C/sec) 200 C 150 C 60~180 sec Copyright 2009-2017 ASB Inc. All rights reserved. Datasheet subject to change without notice. ASB assumes no responsibility for any errors which may appear in this datasheet. No part of the datasheet may be copied or reproduced in any form or by any means without the prior written consent of ASB. 16/16 ASB Inc. [email protected] Tel: +82-42-528-7225 April 2017