SICK DL100-23AA2103 Long range distance sensor Datasheet

Online data sheet
DL100-23AA2103
Dx100
LONG RANGE DISTANCE SENSORS
DL100-23AA2103 | Dx100
LONG RANGE DISTANCE SENSORS
A
B
C
D
E
F
H
I
J
K
L
M
N
O
P
Q
R
S
T
Ordering information
Type
Part no.
DL100-23AA2103
1052700
Other models and accessories
www.sick.com/Dx100
Illustration may differ
Detailed technical data
Performance
Measuring range
0.15 m ... 300 m, on reflective tape "Diamond Grade"
Resolution
0.1 mm, 0.125 mm, 1 mm, 10 mm, 100 mm
Repeatability
2 mm 1)
Accuracy
± 3 mm 2)
Dead time
2 ms
Output time
Synchronous to PLC request (dependent on interfaces)
Light source
Laser, red 3)
Laser class
2 (EN 60825-1 / CDRH)
Typ. light spot size (distance)
5 mm (+ 2 mm x distance in m)
Max. movement speed
30 m/s
Acceleration (max.)
≤ 15 m/s²
Internal measurement cycle
1 ms
1)
2)
3)
Statistical error 1 σ, environmental conditions constant, min. warm-up time 10 min.
From 150 mm ... 180 mm measuring range the accuracy can reach ± 4 mm.
Average service life: 100,000 h at TU = +25 °C.
Interfaces
Switching output
B (push/pull), MF1, MF2 1)
Multifunctional input (MF)
1 x MF1 2)
Data interface
RS-422
1)
2)
HIGH > VS - 3 V / LOW < 2 V.
HIGH > 12 V / LOW < 3 V.
Mechanics/electronics
Supply voltage Vs
1)
2)
3)
4)
2
DC 18 V ... 30 V, limit values
May not fall short of or exceed VS tolerances.
After loss of reflector < 40 ms.
Without mounting bracket: approx. 800 g, with mounting bracket: approx. 1,600 g.
Short-circuit protected, overload-protected. Max. 100 nF / 20 mH.
DISTANCE SENSORS | SICK
Online data sheet | 2016-03-17 13:18:11
Subject to change without notice
DL100-23AA2103 | Dx100
LONG RANGE DISTANCE SENSORS
Ripple
5 Vpp 1)
Initialization time
Typ. 1.5 s 2)
Housing material
Aluminum/zinc die-cast
Connection type
Male connector, M12, SPEEDCON™ compatible
Indication
6 digit 5 x 7 dot matrix display, LEDs
Weight
Approx. 800 g ... 1,600 g 3)
Output current IA
≤ 100 mA 4)
Current consumption
At 24 V DC < 250 mA
Modulation frequency
Fix
1)
2)
3)
4)
May not fall short of or exceed VS tolerances.
After loss of reflector < 40 ms.
Without mounting bracket: approx. 800 g, with mounting bracket: approx. 1,600 g.
Short-circuit protected, overload-protected. Max. 100 nF / 20 mH.
Ambient data
Enclosure rating
IP 65
Protection class
III
Electromagnetic compatibility (EMC)
EN 61000-6-2, EN 61000-6-4 1)
Ambient temperature
Operation: –20 °C ... +55 °C 2)
Operation with cooling case: –20 °C ... +75 °C
Storage: –40 °C ... +75 °C
Effect of air pressure
0.3 ppm/hPa
Effect of air temperature
1 ppm/K
Temperature drift
Typ. 0.1 mm/K
Mechanical load
Shock: (EN 600 68-2-27)
Sine: (EN 600 68-2-6)
Noise: (EN 600 68-2-64)
1)
2)
This is a Class A device. This device can cause radio interference in living quarters.
Temperatures < –10 °C require warm-up time of typ. 7 minutes.
2016-03-17 13:18:11 | Online data sheet

Subject
to change without notice
DISTANCE SENSORS | SICK
3
DL100-23AA2103 | Dx100
LONG RANGE DISTANCE SENSORS
Dimensional drawing (Dimensions in mm (inch))
4
4
4
4
6.7
30
44.6
(1.18)
(1.76)
(0.60)
(0.26)
56 (2.20)
6.7
(0.26)
Dimensional drawing
15.2
A
B
C
D
E
F
3
34.3
20
34.7
(0.79)
(1.37)
104.5 (4.11)
119.9 (4.72)
69.4 (2.73)
(0.72)
6
7
3
1
5
18.2
①
②
③
④
⑤
⑥
⑦
4
33 (1.30)
2
100.2 (3.94)
69.4 (2.73)
H
I
J
K
L
M
N
O
P
Q
R
S
T
2
(1.35)
1
82.5 (3.25)
3
64.6 (2.54)
87.6 (3.45)
Optical axis, sender
Optical axis, receiver
Zero level
Threaded mounting hole M5
Status LED [status]
Display
Operating elements
Connection type
Dx100 Ethernet female connector, M12, 4-pin, D-coded
3
4
2
1
4
DISTANCE SENSORS | SICK
Online data sheet | 2016-03-17 13:18:11
Subject to change without notice
DL100-23AA2103 | Dx100
LONG RANGE DISTANCE SENSORS
DL100 Pro SSI, M12 male connector, 8-pin, A-coded
7
8
6
1
5
4
2
3
Connection diagram
DL100 Pro RS-422, SSI, M12 male connector, 8-pin
wht
1
brn
2
grn
3
yel
4
gra
5
pnk
6
blu
7
red
8
MF1
L+
Rx–/CLK–
Rx+/CLK+
Tx–/DATA–
Tx+/DATA+
M
MF2
Ethernet M12 female connector, 4-pin
1 Tx+
2 Rx+
3 Tx–
4 Rx–
Adjustment possible
DL100-xxXXxx02
PWR
MF1
MF2
LNK
BF
STA
Eth Profibus
Set Esc
5
6
7
⑤ Status LED [status]
⑥ Display
⑦ Operating elements
2016-03-17 13:18:11 | Online data sheet

Subject
to change without notice
DISTANCE SENSORS | SICK
5
DL100-23AA2103 | Dx100
LONG RANGE DISTANCE SENSORS
A
B
C
D
E
F
Recommended accessories
Other models and accessories
www.sick.com/Dx100
Brief description
Type
Part no.
BEF-AH-DX100
2058653
Head A: female connector, M12, 8-pin, straight
Head B: cable
Cable: drag chain use, PUR, halogen-free, shielded, 5 m
DOL-1208-G05MAH1
6032449
Head A: male connector, M12, 4-pin, straight, D-coded
Head B: male connector, RJ45, 8-pin, straight
Cable: PROFINET, drag chain use, PUR, shielded, 5 m
CAT 5e
SSL-2J04-G05ME
6035389
PL560DG
1016806
DME3000 Dx100
SSI/RS-422
upgrade kit
2065223
DME4000/5000
Dx100 SSI/
RS-422 upgrade kit
2065221
Terminal and alignment brackets
Alignment unit for Dx100, incl. mounting material, steel, zinc coated
Plug connectors and cables
Reflectors
Reflector plate, reflective tape "Diamond Grade", 665 mm x 665 mm, material base
plate: aluminum, screw connection, Screw-on, 4 hole mounting
H
I
J
K
L
M
N
O
P
Q
R
S
T
Sets and kits
Accessory kit for upgrade from DME3000 SSI/RS-422 to Dx100 SSI/RS-422
Accessory kit for upgrade from DME4000/5000 SSI/RS-422 to Dx100 SSI/RS-422
6
DISTANCE SENSORS | SICK
Online data sheet | 2016-03-17 13:18:11
Subject to change without notice
Online data sheet
SICK at a glance
SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applications. A unique range of products and services creates the perfect basis for controlling processes securely
and efficiently, protecting individuals from accidents and preventing damage to the environment.
We have extensive experience in a wide range of industries and understand their processes and requirements. With intelligent sensors, we can deliver exactly what our customers need. In application centers in
Europe, Asia and North America, system solutions are tested and optimized in accordance with customer
specifications. All this makes us a reliable supplier and development partner.
Comprehensive services complete our offering: SICK LifeTime Services provide support throughout the machine life cycle and ensure safety and productivity.
For us, that is “Sensor Intelligence.”
Worldwide presence:
Contacts and other locations – www.sick.com
SICK AG | Waldkirch | Germany | www.sick.com
Similar pages