A1N THRU A7N SINGLE PHASE 1.0AMP SURFACE MOUNT GLASS PASSIVATED RECTIFIER Features Glass passivated die construction Ideal for surface mouted applications Low reverse leakage Metallurgically bonded construction High temperature soldering guaranteed: 260℃ /10 seconds,0.375"(9.5mm) lead length, 5 lbs. (2.3kg) tension · Plastic material-UL flammability 94V-0 · · · · · SOD-123FL 8°(8°) 2°(2°) 0.079(2.0) 0.043(1.1) 0.035(0.9) 0.008(0.2) 0.004(0.1) 0.063(1.6) 0.111(2.8) 0.095(2.4) 0.150(3.8) 0.134(3.4) 0.150(3.8) 0.134(3.4) 0.047(1.2) 0.032(0.8) · Case: SOD-123FL, molded plastic · Terminals: plated leads solderable per 0.063(1.6) 0.079(2.0) Mechanical Data 0.047(1.2) 0.032(0.8) MIL-STD-750, Method 2026 · Polarity: Color band denotes cathode end · Mounting position: Any 0.037(0.95) 0.022(0.55) Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ ambient temperature unless otherwise specified. Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. TYPE NUMBER SYMBOL A2N A3N A4N A5N A6N A7N UNITS 50 100 200 400 600 800 1000 V 35 70 140 280 420 560 700 V VRRM Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRWM VDC RMS Reverse Voltage VRMS Average Rectified Output Current A1N @TA =30 ℃ IO 1.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 25 A Forward Voltage per element VFM 1.0 V IR 5.0 100 uA RθJA 180 ℃/W CJ 4 pF TJ,TSTG -55to+150 ℃ Peak Reverse Current At Rated DC Blocking Voltage @IF=1.0A @TA =25℃ @TA =100 ℃ Typical thermal resistance (NOTE 1) Typical junction capacitance (NOTE 2) Operating and Storage Temperature Range Note:1.Thermal resistance from junction to ambient at 0.375" (9.5mm)lead length,P.C.B. mounted 2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. version:01 1 of 2 www.dyelec.com A1N THRU A7N IFINSTANTANEOUS FORWARD CURRENT,(A) I(A V)AVERAGE FORWARD CURRENT (A) FIG. 1- FORWARD CURRENT DERATING CURVE 1.0 0.8 0.6 0.4 0.2 0 0 25 50 75 100 125 150 175 20 10 TA=25 C PULSE WIDTH=300 µs 1%DUTY CYCLE 1 0.1 0.01 0 0.4 0.8 1.2 1.6 1.8 V F, INSTANTANEOUS FORWARD VOLTAGE (V) , TA , AMBIENT TEMPERATURE ( C) FIG. 2-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS I R INSTANTANEOUS REVERSE CURRENT (μA) IFSM PEAK FORWARD SURGE CURRENT (A) FIG. 3-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG. 4-TYPICAL JUNCTION CAPACITANCE 10 30 9 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 8 C j CAPACITANCE(pF) 25 20 15 10 5.0 7 6 5 4 3 2 1 0 0 1 10 100 NUMBER OF CYCLES AT 60 Hz 0 5 10 15 20 25 30 35 VR,REVERSE VOLTAGE, (V) FIG. 5 TYPICAL REVERSE CHARACTERISTICS 1000 100 TJ=125°C 10 TJ=75°C 1 TJ=25°C 0.1 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) version:01 2 of 2 www.dyelec.com 40