EF301G THRU EF306G Glass Passivated Efficient Fast Recovery Rectifier YENYO Voltage Range 50 to 600 V Current 3.0 Ampere Features Fast switching for high efficiency Low forward voltage drop High current capability Low reverse leakage current High surge current capability Mechanical Data Case: Molded plastic DO-201AD Epoxy: UL 94V-0 rate flame retardant Terminals: Solderable per MIL-STD-202 method 208 guranteed Polarity:Color band denotes cathode Mounting position: Any Weight: 1.1 grams DO-201AD .052(1.3) .048(1.2) DIA. 1.0(25.4) MIN. .375(9.5) .285(7.2) .210(5.3) .190(4.8) 1.0(25.4) DIA. MIN. Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. PARAMTER SYMBOL EF301G EF302G EF303G ESF305G EF306G UNIT Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 V Maximum RMS Voltage VRMS 35 70 140 280 480 V VDC 50 100 200 400 600 V Maximum DC Blocking Voltage Maximum Average Forward Rectified o Current TL=55 C IF(AV) 3.0 A IFSM 125 A Peak Forward Surge Current, 8.3ms single Half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage @ 3.0 A 0.875 VF o Maximum DC Reverse Current @TJ=25 C o At Rated DC Blocking Voltage @TJ=125 C IR Maximum Reverse Recovery Time (Note 1) Trr Typical junction Capacitance (Note 2) CJ Maximum Thermal Resistance (Note 3) Operating Junction and Storage Temperature Range 1.1 1.25 V 5.0 uA 150 uA 35 25 nS 50 pF 60 R JA 50 TJ, TSTG -55 to +150 o CW o C NOTES : (1) Reverse recovery test conditions IF = 0.5A, IR = 1.0A, Irr = 0.25A. (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts DC. (3) Thermal Resistance junction to lead. 1/2 R2-MAY-12 RATINGS AND CHARACTERISTIC CURVES EF301G THRU EF306G FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG.1 - FORWARD CURRENT DERATING CURVE 125 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 3.0 2.5 2.0 1.5 1.0 0.5 60 Hz Resistive or Inductive load 0 Pulse Width 8.3ms Single Half-Sire-Wave (JEDEC Method) 100 75 50 25 0 0 50 100 150 1 100 NUMBER OF CYCLES AT 60Hz o LEAD TEMPERATURE, C FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4 - TYPICAL REVERSE CHARACTERISTICS 10 1000 1.0 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES EF301G-EF303G EF305G EF306G 0.1 o TJ=25 C PULSE WIDTH=300uS 1% DUTY CYCLE 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 o 100 TJ=125 C 10 o TJ=25 C 1 0.1 0 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,% FIG.5 - TYPICAL JUNCTION CAPACITANCE 1000 JUNCTION CAPACITANCE, pF IINSTANTANEOUS FORWARD CURRENT, AMPERES 10 o TJ = 25 C f = 1.0 MHZ Vsig = 50mVp-p 100 10 0.1 1.0 4.0 10 100 REVERSE VOLTAGE, VOLTS YENYO TECHNOLOGY CO., LTD. 2/2 R2,MAY-12