GOOD-ARK F5DS Surface mount glass passivated standard rectifier Datasheet

F1DS thru F7DS
Surface Mount Glass Passivated Standard Rectifier
Reverse Voltage 50~1000V Forward Current 1A
Features
•
•
•
•
•
•
•
•
Glass passivated Standard Rectifiers
Very low profile - typical height of 1.0 mm
Low forward voltage drop
Low leakage current
Moisture sensitivity: level 1, per J-STD-020
AEC-Q101 qualified
High temperature soldering guaranteed: 260℃/10 seconds
Halogen-free according to IEC 61249-2-21 definition
eSGA
(SOD‐123FL)
Typical Applications
For use of general purpose rectification in lighting, cellular phone, portable device,
power supplies and other consumer applications.
Maximum Ratings
(TA = 25 °C unless otherwise noted)
Parameter
Symbol F1DS F2DS F3DS F4DS F5DS F6DS F7DS
Maximum repetitive peak reverse voltage
VRRM
Maximum RMS voltage
VRMS
Maximum DC blocking voltage
VDC
Maximum average forward rectified current IF(AV)
Peak forward surge
g current 8.3 ms single
g
IFSM
half sine-wave superimposed on rated load
Operating junction and storage
temperature range
50
35
50
TJ,
TSTG
Electrical Characteristics
100
70
100
200
140
200
400
280
400
1.0
600
420
600
800
560
800
1000
700
1000
A
- 55 to + 150
°C
(TA = 25 °C unless otherwise noted)
Test Conditions Symbol F1DS F2DS F3DS F4DS F5DS F6DS F7DS
Maximum
instantaneous forward
voltage
1A
TA=25℃
Typical reverse
recovery time
IF=0.5A,IR=1.0A,
Typical junction
capacitance
Typical thermal
resistance1)
TA=125℃
Irr=0.25A
4.0 V, 1 MHz
juntion to ambient
juntion to case
juntion to mount
V
V
V
A
25
Parameter
Maximum DC reverse
current at rated DC
blocking
g voltage
g
Unit
VF
1.1
Unit
Volts
5
IR
µA
50
trr
1.8
uS
CJ
6
pF
RθJA
RθJC
RθJM
80
50
℃/W
10
Note 1),The thermal resistance from junction to ambient,case or mount,mounted on P.C.B with 5×5mm copper pads,2 OZ,FR4 PCB
www.goodark.com
1/4
2014.03-Rev.A
F1DS thru F7DS
Surface Mount Glass Passivated Standard Rectifier
Reverse Voltage 50~1000V Forward Current 1A
Package Outline Dimensions
(TA = 25℃ unless otherwise noted)
Figure 1.Forward Current Derating Curve
Figure 2.Maximum Non‐Repetitive
Peak Forward Surge Current
Figure 3.
3 Typical Reverse Characteristics
Figure 4.
4 Typical Junction Capacitance
Figure 5. Typical Instantaneous Forward Characteristics
www.goodark.com
2/4
2014.03-Rev.A
F1DS thru F7DS
Surface Mount Glass Passivated Standard Rectifier
Reverse Voltage 50~1000V Forward Current 1A
Package Outline Dimensions
Unit: mm
DIM
A
Unit: inch
MIN
MAX
MIN
MAX
09
0.9
1 08
1.08
0 035
0.035
0 043
0.043
A1
0
0.1
0.000
0.004
B
0.85
1.05
0.033
0.041
C
0.1
0.25
0.004
0.010
D
1.7
2
0.067
0.079
E
2.9
3.1
0.114
0.122
L
0.43
0.83
0.017
0.033
HE
3.5
3.9
0.138
0.154
Soldering footprint
Packing Information
Packing quantities:
3000 pcs/Reel, 40 Reels/Box; 8mm Tape, 7" Reel
Tape & Reel Specification
www.goodark.com
3/4
2014.03-Rev.A
F1DS thru F7DS
Surface Mount Glass Passivated Standard Rectifier
Reverse Voltage 50~1000V Forward Current 1A
Disclaimers
These materials are intended as a reference to assist our customers in the selection of the
Suzhou Good-Ark product best suited to the customer ’ s application; they do not convey
any license under any intellectual property rights,
rights or any other rights,
rights belonging to Suzhou
Good-Ark Electronics Co., Ltd.or a third party.
Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or
infringement of any third-party ’ s rights, originating in the use of any product data,
diagrams, charts, programs, algorithms, or circuit application examples contained in these
materials.
All information contained in these materials, including product data, diagrams, charts,
programs and algorithms represents information on products at the time of publication of
these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd.
without notice due to product improvements or other reasons. It is therefore recommended
that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized Suzhou
Good Ark Electronics Co.,
Good-Ark
Co Ltd.
Ltd for the latest product information before purchasing a
product listed herein. The information described here may contain technical inaccuracies
or typographical errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility
for any damage, liability, or other loss rising from these inaccuracies or errors. Please also
pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by
various means, including our website home page.
(http://www.goodark.com)
When using any or all of the information contained in these materials, including product
data, diagrams, charts, programs, and algorithms, Please be sure to evaluate all
information as a total system before making a final decision on the applicability of the
information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no
responsibility for any damage, liability or other loss resulting from the information
contained
t i dh
herein.
i
The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint
or reproduce in whole or in part these materials.
Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for
further details on these materials or the products contained herein.
www.goodark.com
4/4
2014.03-Rev.A
Similar pages