Vishay AORN Rugged molded case construction Datasheet

AORN
www.vishay.com
Vishay Dale Thin Film
Molded, 50 mil Pitch, Dual-In-Line Thin Film Resistor,
Precision Automotive, AEC-Q200 Qualified, Networks
FEATURES
• Moisture resistant tantalum nitride resistive film
(MIL STD 202, method 106)
Available
• Standard 8 pin count (0.150" narrow body)
JEDEC MS-012
Available
• Rugged molded case construction
• Excellent long term ratio stability
(R ± 0.015 %)
The AORN series features a narrow body (0.150") small
outline SMT package. The network is constructed with a
tantalum nitride resistor film on a high purity alumina
substrate for improved ESD and moisture protection.
• Low TCR tracking ± 5 ppm/°C
SCHEMATICS
Note
* This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details.
8
R1
7
R2
6
R2
• Passes Sulfur Resistance Test per ASTM B 809
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
5
R1
TYPICAL APPLICATIONS
1
2
3
• Voltage divider circuits
4
• Engine control units
• Signal conditioning
8
R1
7
R1
1
2
6
R1
3
5
• Feedback circuits
TYPICAL PERFORMANCE
R1
TCR
4
Note
• Consult Factory for additional divider ratios and resistance
values.
TOL.
ABSOLUTE
TRACKING
25
5
ABSOLUTE
RATIO
0.10
0.05
STANDARD DIVIDER VALUES
RATIO R1/R2
R1
R2
100:1
50:1
25:1
20:1
10:1
5:1
2:1
100 k
50 k
25 k
20 k
10 k
10 k
10 k
100 k
100 k
49.9 k
24.9 k
20.0 k
10.0 k
4.99 k
2.0 k
1.0 k
1 k
1 k
1 k
1 k
1 k
2 k
5 k
1:1
Revision: 24-Feb-15
Document Number: 60127
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
AORN
www.vishay.com
Vishay Dale Thin Film
STANDARD ELECTRICAL SPECIFICATIONS
TEST
SPECIFICATIONS
CONDITIONS
Tantalum nitride (Ta2N)
-
Pin/Lead Number
8
-
Resistance Range
1 k to 100 k per resistor
-
TCR: Absolute
± 25 ppm/°C (standard)
-55 °C to +155 °C
TCR: Tracking
± 5 ppm/°C (typical)
-55 °C to +155 °C
± 0.10 % to ± 1 %
At +25 °C temperature
± 0.05 % to ± 0.1 %
At +25 °C temperature
Material
Tolerance: Absolute
Tolerance: Ratio
Power Rating: Resistor
100 mW
Maximum at +70 °C
Power Rating: Package
400 mW
Maximum at +70 °C
Stability: Absolute
R ± 0.05 %
1000 h at +155 °C
Stability: Ratio
R ± 0.015 %
1000 h at +155 °C
Voltage Coefficient
< 0.1 ppm/V
Working Voltage
100 V max. not to exceed
-
P x R
Operating Temperature Range
-55 °C to +155 °C
-
Storage Temperature Range
-55 °C to +155 °C
-
 -30 dB
-
0.08 μV/°C
-
Shelf Life Stability: Absolute
R ± 0.01 %
1 year at +25 °C
Shelf Life Stability: Ratio
R ± 0.002 %
1 year at +25 °C
Noise
Thermal EMF
DIMENSIONS AND IMPRINTING in inches and millimeters
E
B
C
DIMENSION
INCHES
MILLIMETERS
A
0.157
3.99
B
0.0165 ± 0.0025
0.4 ± 0.06
C
0.050
1.27
D
0.195 max.
4.93 max.
E
0.008 ± 0.001
0.20 ± 0.03
F
0.028 ± 0.001
0.71 ± 0.02
G
0.239 ± 0.001
6.07 ± 0.13
H
0.068 max.
1.73 max.
I
0.008 ± 0.002
6.07 ± 0.13
F
A
G
Date
Code
D
H
I
Seating
Plane
MECHANICAL SPECIFICATIONS
Resistive Element
Tantalum nitride (Ta2N)
Substrate Material
Ceramic
Body
Terminals
Lead Frame Finish
Note
• Gold thickness less than 10 μ".
Molded epoxy
Copper alloy
Ni/Pd/Au solder free (1)
DERATING CURVE
100
Precent of Rated Power
AORN
100 % = 0.40 W
80
60
40
20
0
0
70
125
155
Ambient Temperature °C
Revision: 24-Feb-15
Document Number: 60127
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
AORN
www.vishay.com
Vishay Dale Thin Film
ENVIRONMENTAL TESTS
ENVIRONMENTAL TEST
SUGGESTED TYPICAL VISHAY
PRODUCT
PERFORMANCE
LIMITS
< 10K
CONDITONS
TYPICAL VISHAY
PERFORMANCE
> 10K
Max. Ambient Temperature
at Rated Wattage
+70 °C
+70 °C
+70 °C
Max. Ambient Temperature
at Power Derating
+155 °C
+155 °C
+155 °C
R
MIL-STD-202, 108, 1000 h at 155 °C
± 0.20 %
0.08 %
0.045 %
Temperature Cycling
R
JESD22, A104, 1000 cycles,
-55 °C to +155 °C
± 0.25 %
0.012 %
0.010 %
Moisture Resistance
R
MIL-STD-202 method 106
± 0.20 %
0.007 %
0.007 %
R
MIL-STD-202, 103, 1000 h at 85 °C,
85 % RH, 10 % P
± 0.25 %
0.075 %
0.075 %
High Temperature Exposure
Biased Humidity
Life
R
MIL-STD-202, 108, 1000 h at 155 °C
± 0.50 %
0.199 %
0.221 %
Mechanical Shock
R
MIL-STD-202 method 213, condition C
± 0.25 %
0.004 %
0.002 %
Vibration
R
MIL-STD-202 method 204,
10 Hz to 2 kHz
± 0.25 %
0.004 %
0.002 %
Resistance to Soldering Heat
R
MIL-STD-202, 204, condition B
± 0.10 %
-0.008 %
0.016 %
R
AEC-Q200-002 at 1 kV, human body
± 0.50 %
-0.028 %
AEC-Q200-002 at 2 kV, human body
± 0.50 %
J-STD-002 method B and B1
95 %
Electrostatic Discharg
Solderability
R
Terminal Strenght
0.108 %
Acceptable
Acceptable
AEC-Q200-006 at 1 kg for 60 s
Acceptable
Acceptable
AEC-Q200-001 Para 4.0
Acceptable
Acceptable
Flame Retardance
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: AORN 5-1
A
O
R
N
A
O
R
N
GLOBAL MODEL
(4 digits)
AORN
8 pin SOIC, surface mount
(e4)
1
5
-
1
A
U
F
0
0
1
A
U
F
DIVIDER (1) or RESISTANCE
(3, 4 or 5 digits)
TOLERANCE %
(ABSOLUTE / RATIO)



or
A = 0.1 / 0.05
B = 0.1 / 0.1
C = 0.25 / 0.1
D = 0.5 / 0.1
F = 1.0 / 0.5
2-1
5-1
10 - 1
20 - 1
25 - 1
50 - 1
100 - 1
1001
2001
4991
1002
2002
2492
4992
1003
PACKAGING
TAPE AND REEL
T0 = 100 min., 100 mult
T1 = 1000 min., 1000 mult
T3 = 300 min., 300 mult
T5 = 500 min., 500 mult
TF = Full reel 3000
TS = 100 min., 1 mult
UF = TUBED
Note
(1) Examples:
1. 2-1 = ratio between resistance values
2. 1001 = four 1K resistors
Revision: 24-Feb-15
Document Number: 60127
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Revision: 13-Jun-16
1
Document Number: 91000
Similar pages