Kemet C1206F224K1RAC Open mode surface mount ceramic chip capacitors - x7r dielectric Datasheet

Product Bulletin
Open Mode Surface Mount Ceramic Chip Capacitors – X7R Dielectric
Outline Drawing
L
W
TIN PLATE
T
B
NICKEL PLATE
S
ELECTRODES
CONDUCTIVE METALLIZATION
Dimensions – Millimeters (Inches)
EIA Size
Code
Metric Size
Code
L
Length
W
Width
B
Bandwidth
S
Separation
0805
2012
2.0 (.079)
± 0.2 (.008)
1.25 (.049)
± 0.2 (.008)
0.05 (.02)
± 0.25 (.010)
0.75 (.030)
1206
3216
3.2 (.126)
± 0.2 (.008)
1.6 (.063)
± 0.2 (.008)
0.05 (.02)
± 0.25 (.010)
N/A
1210
3225
3.2 (.126)
± 0.2 (.008)
2.5 (.098)
± 0.2 (.008)
0.05 (.02)
± 0.25 (.010)
N/A
See below for thickness dimension.
Capacitance Value
Capacitance
Values (µF)
.047
.068
0.22
0.33
1.0
KEMET Part
Number
C0805F473_1RAC
C0805F683_1RAC
C1206F224_1RAC
C1206F334_1RAC
C1210F105_1RAC
Voltage
*Capacitance
Tolerance
Thickness
mm
Qty
7” Reel
Qty
13” Reel
100
100
100
100
100
K, M
K, M
K, M
K, M
K, M
1.0 (.039) ± 0.10 (.004)
2,500
2,500
2,500
2,000
1,500
10,000
10,000
10,000
8,000
8,000
1.25 (.049) ± 0.15 (.006)
1.0 (.039) ± 0.10 (.004)
1.6 (.063) ± 0.15 (.006)
2.5 (.098) ± 0.20 (.008)
F9121C 9/06
Ordering Information
C
0805
F
473
K
1
R
A
C
Style
C - Ceramic
Size Code
0805, 1206, 1210
Specification
F - Open-Mode
Capacitance Code, pF
First two digits represent significant figures.
Third digit specifies number of zeros. 100 pF = 101.
(Use “9” for 1.0 through 9.9 pF)
(Use “8” for 0.1 through .99 pF)
End Metallization
C = Standard
Failure Rate Level
A = Not Applicable
Temperature Characteristic
Designated by Capacitance
Change over Temperature Range
R – X7R (±15%) (-55°C +125°C)
Capacitance Tolerance
K = ±10%; M = ±20%
Voltage
1 = 100 Volts
Open Mode Design
The open-mode dimension (OM)
exceeds the termination bandwidth
dimensions: OM >BW
Electrical Parameters
As detailed in the KEMET Surface Mount Catalog F3102 for X7R, with following specific requirements
based on room temperature (25°C) parameters:
• Operating Range: -55°C to +125°C, with no-bias capacitance shift limited to ± 15% over that range.
• Insulation Resistance (IR) measured after 2 minutes at rated voltage @ 25°C: Limit is 500
megohm microfarads or 50 gigaohm, whichever is less.
• Capacitance and Dissipation Factor (DF) measured at 1kHz and 1 Vrms. DF Limit is 2.5%.
Qualifications/ Certifications
• AEC-Q200 Rev. C
• RoHS Compliant
Soldering Process
These components are suitable for reflow and wave soldering. All parts incorporate the standard KEMET
barrier layer of pure nickel, with an overplate of pure tin to provide excellent solderability as well as resistance to leaching.
Marking
These chips will be supplied unmarked. If required, they can be laser-marked as an extra option.
Details on the marking format are included in KEMET Surface Mount catalog F3102.
In general, the information in the KEMET Surface Mount catalog F3102 applies to these
capacitors. The information in this bulletin supplements that in the catalog.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
Similar pages