AME AME8502 Portable electronic Datasheet

AME
µProcessor Supervisory
AME8502
n General Description
n Application
The AME8502 family allows the user to customize the
CPU reset function without any external components.
The user has a large choice of reset voltage thresholds,
reset time intervals, and output driver configurations, all
of which are preset at the factory. Each wafer is trimmed
to the customers specicications.
There circuits monitor the power supply voltage of µP
based system. When the power supply voltage drops
below the voltage threshold a reset is asserted immediately (within an interval TD1). The reset remains asserted
after the supply voltage rises above the voltage threshold
for a time interval, TD2. The reset output may be either
active high (RESET) or active low (RESETB). The reset
output may be configured as push-pull. The state of the
reset output is guaranteed to be correct for supply voltages greater than 0.9V.
n Features
l Internally Fixed Threshold 1.2V to 4.5V in 0.1V
Step
l High Accuracy ±1.5%
l
l
l
l
l
l
Portable Electronics
Power Supplies
Computer Peripherals
Data Acquisition Systems
Applicatiions using CPUs
Consumer Electronics
n Typical Application
VIN
VIN
Processor
RESET /
RESETB
GND
GND
n Functional Block Diagram
VIN
R1
P1
I1
l Low Supply Current 3µA
RESET/
RESETB
Delay
l No External Components Required
l Quick Reset within 20µs
RESET
Input
R2
VREF
N1
GND
l Built-in Recovery Delay Include 0ms, 55ms,
220ms, 450ms
l Low Functional Supply Voltage 0.9V
l Push-Pull Output
l Small SOT-23, TSOT-23A, SOT-143, SC-70-4,
SOT-25 and TSOT-25A Package
l RoHS Compliant and Halogen Free
Rev. A.01
1
AME
µProcessor Supervisory
AME8502
n Pin Configuration
SOT-23/TSOT-23A
Top View
AME8502-AETxxxxxx
1. GND
2. RESET/RESETB
3. IN
3
AME8502
1
SOT-23/TSOT-23A
Top View
2
* Die Attach:
Non-Conductive Epoxy
SOT-23/TSOT-23A
Top View
AME8502
AME8502
1
2
4
3
AME8502
1
1
2
3
AME8502
1
AME8502-A4Uxxxxx
1. GND
2. RESET/RESETB
3. NC
4. IN
* Die Attach:
Conductive Epoxy
SOT-25/TSOT-25A
Top View
AME8502-AIUxxxxx
1. GND
2. RESET/RESETB
3. NC
4. IN
2
5
4
AME8502
1
* Die Attach:
Non-Conductive Epoxy
2
* Die Attach:
Non-Conductive Epoxy
2
* Die Attach:
Conductive Epoxy
SC-70-4
Top View
4
AME8502-BETxxxxxx
1. RESET/RESETB
2. GND
3. IN
SOT-143
Top View
AME8502-CETxxxxxx
1. RESET/RESETB
2. IN
3. GND
3
3
2
3
AME8502-AEVxxxxxx
1. RESET/RESETB
2. IN
3. GND
4. NC
5. NC
* Die Attach:
Non-Conductive Epoxy
Rev. A.01
AME
µProcessor Supervisory
AME8502
n Pin Description
Pin No.
SOT-23 /
TSOT-23A
A
B
C
1
2
3
2
3
1
3
1
2
N/A N/A N/A
Rev. A.01
SOT-143 SC-70-4
1
2
1
2
SOT-25 /
TSOT-25A
Pin Name
3
GND
1
RESET/
RESETB
Pin Description
Ground.
This pin can be ordered as RESET or
RESETB. Reset is active high.
RESETB is active low. It is also available
with a push-pull.
4
4
2
IN
Positive power supply. A reset is asserted
after this voltage drops below a
predetermined level. After VIN rises above
that level the reset output remains asserted
until the end of the reset timeout periold.
3
3
4, 5
NC
No connection. Not internally connected.
Can left floating or connected to GND.
3
AME
µProcessor Supervisory
AME8502
n Ordering Information
AME8502 - x x x x x xxx x
Special Feature
VIN Threshold Voltage (VTH)
Reset Time(TD2NOM)
Output Options
Number of Pins
Package Type
Pin Configuration
Pin Configuration
A
(SOT-23)
(TSOT-23A)
B
(SOT-23)
(TSOT-23A)
C
(SOT-23)
(TSOT-23A)
A
(SOT-143)
A
(SOT-25)
(TSOT-25A)
A
(SC-70-4)
4
Package
Type
1. GND
E: SOT-2X
2. RESET/RESETB I: SC-70
3. IN
4: SOT-143
1. RESET/RESETB
2. GND
3. IN
1. RESET/RESETB
2. IN
3. GND
Number
of Pins
Output
Options
T: 3
U: 4
V: 5
A: RESETB
B: RESET
Reset
Time
(TD2NOM)
B: 0ms
C: 55ms
D: 220ms
G: 450ms
VIN
Threshold
Voltage
(VTH)
120:
130:
140:
:
:
:
480:
490:
500:
1.2V
1.3V
1.4V
:
:
:
4.8V
4.9V
5.0V
Special Feature
N/A: SOT-23/SOT-25
K: 0.9mm max
(for TSOT-2XA Only)
1. GND
2. RESET/RESETB
3. NC
4. IN
1. RESET/RESETB
2. IN
3. GND
4. NC
5. NC
1. GND
2. RESET/RESETB
3. NC
4. IN
Rev. A.01
AME
µProcessor Supervisory
AME8502
n Absolute Maximum Ratings
Parameter
Maximum
Unit
Supply Voltage
6
V
Input Current, VIN
20
mA
Output Current, RESET, RESETB
20
mA
HBM
2
kV
MM
200
V
ESD Classification
n Recommended Operating Conditions
Parameter
Symbol
Rating
Junction Temperature Range
TJ
-40 to +125
Ambient Temperature Range
TA
-40 to +85
Storage Temperature Range
TSTG
-65 to +150
Rev. A.01
Unit
o
C
5
AME
µProcessor Supervisory
AME8502
n Thermal Information
Parameter
Package
Die Attach
SOT-23
TSOT-23A
Conductive Epoxy
Symbol
130
SOT-23
SOT-25
TSOT-23A
TSOT-25A
θJ C
Non-Conductive Epoxy
120
SOT-23
260
Conductive Epoxy
θJA
Non-Conductive Epoxy
280
400
SOT-23
400
Conductive Epoxy
455
285
SOT-23
SOT-25
TSTO-23A
TSOT-25A
C/W
250
SOT-143
Internal Power Dissipation
o
230
SC-70-4
TSOT-23A
C/W
350
SOT-23
SOT-25
TSTO-23A
TSOT-25A
o
130
SOT-143
Thermal Resistance
(Junction to Ambient)
140
SC-70-4
TSOT-23A
Unit
81
SOT-143
Thermal Resistance*
(Junction to Case)
Maximum
PD
Non-Conductive Epoxy
SC-70-4
Lead Temperature ( soldering 10 sec)**
400
mW
400
300
260
o
C
* Measure θJC on center of molding compound if IC has no tab.
** MIL-STD-202G 210F.
6
Rev. A.01
AME
µProcessor Supervisory
AME8502
n Electrical Specifications
TA=27oC, unless otherwise specified.
Parameter
Symbol
Operating VDD(VOUT) Range
VDD
Supply Current
IDD
VTH
Reset Threshold
Threshold Voltage Accuracy
VDD Drop to Reset Delay
Test Condition
Version C
Version D
6
RESET
1.1
6
VDD=5V, TA=27oC
o
tRD
Drop=VTH-125mV
VDD 1.02 x VTH
RESET Output Voltage High
RESET Output Voltage Low
RESET Output Voltage High
Hysteresis Width
Rev. A.01
VOH
VOL
VOH
VHYS
8
1.2 to 4.5
TA=27 C
TA=27 C
VOL
3
o
Version G
RESET Output Voltage Low
Max
0.9
∆VTH
tRP
Typ
RESET
Version B
Reset Active Time
Out Period
Min
-1.5
1.5
µA
%
µs
20
0
0
0
35
55
75
143
220
297
292
450
608
0.4
VDD<VTH(MIN), ISINK=1.2mA,
VTH1.8V
0.3
VTH(MIN) >VDD>1V,
ISINK=0.5mA
0.3
ms
V
VDD-1.5
0.8 VDD
V
0.8 VDD
VDD>VTH(MAX), ISINK=3.5mA,
VTH3V
0.4
VDD>VTH(MAX), ISINK=1.2mA,
VTH1.8V
0.3
VDD>VTH(MAX), ISINK=0.5mA,
VTH1.2V
0.3
1.1V<VDD<VTH(MIN)
ISOURCE=200µA
1.8V<VDD<VTH(MIN)
ISOURCE=500µA
3V<VDD<VTH(MIN)
ISOURCE=800µA
V
V
VDD<VTH(MIN), ISINK=3.5mA,
VTH3V
VDD>VTH(MAX)
ISOURCE=800µA, VTH3V
VDD>VTH(MAX)
ISOURCE=500µA, VTH1.8V
VDD>VTH(MAX)
ISOURCE=200µA, VTH1.1V
Units
V
0.8 VDD
0.8 VDD
V
VDD-1.5
0.01VTH
V
7
AME
µProcessor Supervisory
AME8502
n Characterization Curve
Output Voltage vs. Input Voltage
Glitch Rejection
4.5V
120
1.2V
100
Output Voltage (V)
Glitch Duration (us)
8
80
60
40
20
0
6
4
2
0
0.01
0.1
0
1
2
Input Voltage (V)
Nch Driver Output Current vs VDS
Nch Driver Output Current vs VDS
VDD =1V
V
DD=1. 1V
V
TH =1.2V
Output Current (mA)
Output Current (mA)
6
Glitch Amplitude (V)
2. 4
2
1. 6
1. 2
0. 8
0. 4
0
V DD =1.5V
V DD =2V
V DD =2.5V
V DD =3V
V DD =3. 5V
V DD =4V
V DD =4.4V
V TH =4. 5V
140
120
100
80
60
40
20
0
0.5
1
0
1.5
0
1
2
3
4
5
VDS (V)
VDS (V)
Supply Current vs Input Voltage
Supply Current vs Input Voltage
o
o
-30 C
o
25 C
80 C
o
o
-30 C
V TH =1.2V
25 C
o
80 C
V TH =4. 5V
1.8
Supply Current (uA)
5
Supply Current (uA)
4
4
3
2
1
1.6
1.4
1.2
1
0.8
0.6
0.4
0.2
0
0
1
2
3
4
Input Voltage (V)
8
5
6
0
0
1
2
3
4
5
6
7
Input Voltage (V)
Rev. A.01
AME
µProcessor Supervisory
AME8502
n Characterization Curve (Contd.)
Power-Down Reset vs. Temperature
150 mV
200 mV
250mV
V TH =1.2V
20
16
12
8
4
0
-50
-25
0
25
50
75
100
125
Power Down Reset Time-Out (us)
Power Down Reset Time-Out (us)
Power-Down Reset vs. Temperature
TH
=4.5V
30
25
20
15
10
5
0
-50
-25
0
25
50
75
100
125
Reset Threshold Derivation vs.
Temperature
o
o
25 C
80 C
V TH =4.5V
1.2V
V DS=0.5V
4. 5V
2.9V
6
Reset Threshold (V)
50
40
30
20
10
5
4
3
2
1
0
1
2
3
4
5
0
25
50
75
100
Pch Driver Output Vurrent
vs. Input Voltage
Power-Up Reset Time-Out
vs. Temperature
V DS=0.5V
V DS=1V
V
DS=1. 5V
V DS =2.1V
50
40
30
20
10
2
4
Input Voltage (V)
125
100
60
0
-25
Temperature (oC)
70
0
-50
Input Voltage (V)
6
Power-Up Reset Time-Out (ms)
Sink Current ISINK (mA)
V
Nch Driver Sink Current vs.
Input Voltage
60
Output Current (mA)
250mV
Temperature (oC)
o
Rev. A.01
200mV
Temperature (oC)
-30 C
0
150mV
35
90
80
70
60
50
40
30
20
10
0
-50
-25
0
25
50
75
100
125
Temperature (oC)
9
AME
µProcessor Supervisory
AME8502
n Characterization Curve (Contd.)
V DS =1.5V
V DS =2V
V DS =2.5V
V DS =3V
V DS =3.5V
V DS =4V
V DS =4. 5V
V DS =5V
V DS =5.5V
V DS =6V
200
150
100
50
0
1.2V
1.5
1.2
0.9
0.6
0.3
0
0
1
2
3
VDS (V)
10
Output Voltage vs. Input Voltage
Output Voltage (V)
Output Current (mA)
Nch Driver Output Current vs VDS
4
5
6
0
2
4
6
Input Voltage (V)
Rev. A.01
AME
µProcessor Supervisory
AME8502
n Tape and Reel Dimension
SOT-23
P0
W
AME
AME
PIN 1
P
Carrier Tape, Number of Components Per Reel and Reel Size
Package
Carrier Width (W)
Pitch (P)
Pitch (P0)
Part Per Full Reel
Reel Size
SOT-23
8.0±0.1 mm
4.0±0.1 mm
4.0±0.1 mm
3000pcs
180±1 mm
TSOT-23-A
P0
W
AME
AME
PIN 1
P
Carrier Tape, Number of Components Per Reel and Reel Size
Package
Carrier Width (W)
Pitch (P)
Pitch (P0)
Part Per Full Reel
Reel Size
TSOT-23A
8.0±0.1 mm
4.0±0.1 mm
4.0±0.1 mm
3000pcs
180±1 mm
Rev. A.01
11
AME
µProcessor Supervisory
AME8502
n Tape and Reel Dimension (Contd.)
SOT-143
P0
W
AME
AME
PIN 1
P
Carrier Tape, Number of Components Per Reel and Reel Size
Package
Carrier Width (W)
Pitch (P)
Pitch (P0)
Part Per Full Reel
Reel Size
SOT-143
8.0±0.1 mm
4.0±0.1 mm
4.0±0.1 mm
3000pcs
180±1 mm
SC-70-4
P0
W
AME
AME
PIN 1
P
Carrier Tape, Number of Components Per Reel and Reel Size
12
Package
Carrier Width (W)
Pitch (P)
Pitch (P0)
Part Per Full Reel
Reel Size
SC-70-4
8.0±0.1 mm
4.0±0.1 mm
4.0±0.1 mm
3000pcs
180±1 mm
Rev. A.01
AME
µProcessor Supervisory
AME8502
n Tape and Reel Dimension (Contd.)
SOT-25
P0
W
AME
AME
PIN 1
P
Carrier Tape, Number of Components Per Reel and Reel Size
Package
Carrier Width (W)
Pitch (P)
Pitch (P0)
Part Per Full Reel
Reel Size
SOT-25
8.0±0.1 mm
4.0±0.1 mm
4.0±0.1 mm
3000pcs
180±1 mm
TSOT-25A
P0
W
AME
AME
PIN 1
P
Carrier Tape, Number of Components Per Reel and Reel Size
Package
Carrier Width (W)
Pitch (P)
Pitch (P0)
Part Per Full Reel
Reel Size
TSOT-25A
8.0±0.1 mm
4.0±0.1 mm
4.0±0.1 mm
3000pcs
180±1 mm
Rev. A.01
13
AME
µProcessor Supervisory
AME8502
n Package Dimension
SOT-23
Top View
Side View
D
E
H
L
e
PIN 1
A
Front View
A1
b
n Lead Pattern Drawing
2.40 BSC
1.00 BSC
0.80 BSC
Note:
1. Lead pattern unit description:
BSC: Basic. Represents theoretical exact dimension or
dimension target.
2. Dimensions in Millimeters.
3. General tolerance ± 0.05mm unless otherwise specified.
1.90 BSC
14
Rev. A.01
AME
µProcessor Supervisory
AME8502
n Package Dimension (Contd.)
TSOT-23A
D
SYMBOLS
b
L
0. 25
E
E1
PIN1
e
c
e1
SIDE VIEW
TOP VIEW
INCHES
A1
MIN
MAX
MIN
MAX
A
0.700
0.900
0.028
0.035
A1
0.000
0.100
0.000
0.004
A2
0.700
0.800
0.028
0.031
b
0.350
0.500
0.014
0.020
c
0.080
0.200
0.003
0.008
D
2.820
3.020
0.111
0.119
E
1.600
1.700
0.063
0.067
E1
2.650
2.950
0.104
0.116
A
A2
e
0.95 BSC
0.037 BSC
e1
1.90 BSC
0.075 BSC
L
REAR VIEW
MILLIMETERS
θ
0.300
0
o
0.600
8
o
0.012
0
o
0.024
8o
n Lead Pattern Drawing
2.40 BSC
1.00 BSC
0.80 BSC
Note:
1. Lead pattern unit description:
BSC: Basic. Represents theoretical exact dimension or
dimension target.
2. Dimensions in Millimeters.
3. General tolerance ± 0.05mm unless otherwise specified.
1.90 BSC
Rev. A.01
15
AME
µProcessor Supervisory
AME8502
n Package Dimension (Contd.)
SOT-143
e
e1
L
E
E1
d
L1
b1 1 place
PIN 1
c
b x3 place
0.250
D
SIDE VIEW
TOP VIEW
SYMBOLS
A1
MAX
MIN
MAX
A
0.900
1.150
0.035
0.045
A1
0.000
0.100
0.000
0.004
A2
0.900
1.050
0.035
0.041
b
0.300
0.500
0.012
0.020
b1
0.750
0.900
0.030
0.035
c
0.080
0.150
0.003
0.006
D
2.800
3.000
0.110
0.118
0.200 TYP
d
0.008 TYP
E
1.200
1.400
0.047
0.055
E1
2.250
2.550
0.089
0.100
0.950 TYP
e
e1
1.800
L1
θ
0.037 TYP
2.000
0.071
0.550 REF.
L
16
INCHES
MIN
A
A2
FRONT VIEW
MILLIMETERS
0.300
0
o
0.022 REF
0.500
8
0.079
o
0.012
0
o
0.020
8o
Rev. A.01
AME
µProcessor Supervisory
AME8502
n Package Dimension (Contd.)
SC-70-4
SYMBOLS
D
e1
e
L
E
E1
PIN 1
L1
d
b
0.20
TOP VIEW
SIDE VIEW
MAX
MIN
MAX
A
0.900
1.100
0.035
0.043
A1
0.000
0.100
0.000
0.004
A2
0.900
1.000
0.035
0.039
b
0.250
0.400
0.010
0.016
b1
0.350
0.500
0.014
0.020
c
0.080
0.150
0.003
0.006
0.050 TYP
0.002 TYP
D
2.000
2.200
0.079
0.087
E
1.150
1.350
0.045
0.053
E1
2.150
2.450
0.085
0.096
0.650 TYP
e
A
A2
e1
1.200
A1
L1
θ
0.026TYP
1.400
0.047
0.525 REF
L
FRONT VIEW
INCHES
MIN
d
c
b1
MILLIMETERS
0.260
0
o
0.021 REF
0.460
8
0.055
o
0.010
0
o
0.018
8o
n Lead Pattern Drawing
0.8 BSC
0.45 BSC
1.94 BSC
1.3 BSC
0.35 BSC
Rev. A.01
Note:
1. Lead pattern unit description:
BSC: Basic. Represents theoretical exact dimension or
dimension target.
2. Dimensions in Millimeters.
3. General tolerance ± 0.05mm unless otherwise specified.
0.05REF
17
AME
µProcessor Supervisory
AME8502
n Package Dimension (Contd.)
SOT-25
Top View
Side View
D
E
H
L
PIN 1
S1
e
A1
A
Front View
b
n Lead Pattern Drawing
2.40 BSC
1.00 BSC
0.70 BSC
0.95 BSC
Note:
1. Lead pattern unit description:
BSC: Basic. Represents theoretical exact dimension or
dimension target.
2. Dimensions in Millimeters.
3. General tolerance ± 0.05mm unless otherwise specified.
0.95 BSC
1.90 BSC
18
Rev. A.01
AME
µProcessor Supervisory
AME8502
n Package Dimension (Contd.)
TSOT-25A
D
SYMBOLS
b
L
0.25
E
E1
PIN 1
e
c
e1
TOP VIEW
SIDE VIEW
INCHES
A1
MIN
MAX
MIN
MAX
A
0.700
0.900
0.028
0.035
A1
0.000
0.100
0.000
0.004
A2
0.700
0.800
0.028
0.031
b
0.350
0.500
0.014
0.020
c
0.080
0.200
0.003
0.008
D
2.820
3.020
0.111
0.119
E
1.600
1.700
0.063
0.067
E1
2.650
2.950
0.104
0.116
A
A2
e
0.95 BSC
0.037 BSC
e1
1.90 BSC
0.075 BSC
L
REAR VIEW
MILLIMETERS
θ
0.300
0
o
0.600
8
o
0.012
0
o
0.024
8o
n Lead Pattern Drawing
2.40 BSC
1.00 BSC
0.70 BSC
0.95 BSC
Note:
1. Lead pattern unit description:
BSC: Basic. Represents theoretical exact dimension or
dimension target.
2. Dimensions in Millimeters.
3. General tolerance ± 0.05mm unless otherwise specified.
0.95 BSC
1.90 BSC
Rev. A.01
19
www.ame.com.tw
E-Mail: [email protected]
Life Support Policy:
These products of AME, Inc. are not authorized for use as critical components in life-support
devices or systems, without the express written approval of the president
of AME, Inc.
AME, Inc. reserves the right to make changes in the circuitry and specifications of its devices and
advises its customers to obtain the latest version of relevant information.
 AME, Inc. , February 2014
Document: A025A-DS8502-A.01
Corporate Headquarter
AME, Inc.
8F, 12, WenHu St., Nei-Hu
Taipei 114, Taiwan .
Tel: 886 2 2627-8687
Fax: 886 2 2659-2989
Similar pages