Panasonic EEETK1E221UP Aluminum electrolytic capacitors/ tk Datasheet

Aluminum Electrolytic Capacitors/ TK
Surface Mount Type
Series:
TK
Type:
V
■ Features
●
●
●
●
●
●
Endurance : 125 °C 3000 h
Low ESR at –40 °C (50 % lower than TG series)
Added ESR specification after the endurance test
Vibration-proof product is available upon request.
AEC-Q200 qualified ✽
RoHS directive compliant
■ Specifications
Category Temp. Range
Rated W.V. Range
Nominal Cap. Range
Capacitance Tolerance
DC Leakage Current
tan d
Characteristics
at Low Temperature
Endurance
Shelf Life
ESR after the Life test
–40 °C to +125 °C
10 V.DC to 35 V.DC
47 μF to 470 μF
±20 % (120 Hz/+20 °C)
I < 0.01 CV After 2 minutes
Please see the attached standard products list
W.V. (V)
10
16
25
35
Z(–25 °C)/Z(+20 °C)
3
2
2
2
(Impedance ratio at 120 Hz)
Z(–40 °C)/Z(+20 °C)
4
3
3
3
After the life test with DC rated woking voltage at +125 °C ±2 °C for 3000 hours, the capacitors shall meet the
limits specified below.
Capacitance change
±30 % of initially measured values (code U : ±35 %)
tan d
< 300 % of initially specified values (code U : ±350 %)
DC leakage current
< initially specified values
After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized at +20 °C,
capacitors shall meet the limits specified in Endurance. (With voltage treatment)
After the life test with DC rated working voltage at +125 °C±2 °C for 3000 hours, ESR value shall
meet the specified below.
20 °C
< 150 % of the initially measured specified value.
After 1000 hours
–40 °C
< 200 % of the initially measured specified value.
20 °C
< 300 % of the initially measured specified value.
After 2000 hours
–40 °C
< 400 % of the initially measured specified value.
20 °C
< 1000 % of the initially measured specified value.
After 3000 hours
–40 °C
< 1500 % of the initially measured specified value.
■ Frequency correction factor for ripple current
Frequency (Hz)
Correction factor
■ Marking
120
0.65
1k
0.85
10 k
0.95
100 k to
1.00
■ Dimensions in mm (not to scale)
(Unit : mm)
0.3 max.
+
(I)
L
Pressure Relief (010 and larger)
(P)
B±0.2
Series identification
Mark for Lead-Free
Products Black Dot
(Square)
Rated voltage Mark
H
0D±0.5
Capacitance (μF)
" 5,
A±0.2
–
K
Negative polarity
marking (–)
(I)
Example:10 V 220 μF (polarized)
Marking color: BLACK
W
( ) Reference size
Lot number
Rated Voltage Mark
A
10 V
C
16 V
E
25 V
V
35 V
Size
code
D
L
A, B
H
I
W
P
K
F
8.0
10.2±0.3
8.3 10.0 max.
3.4
0.90±0.2
3.1
0.70±0.2
G
10.0
10.2±0.3
10.3 12.0 max.
3.5
0.90±0.2
4.6
0.70±0.2
✽ This product qualify for AEC-Q200, but it has some deviations.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03 Mar. 2014
– EEE-55 –
Aluminum Electrolytic Capacitors/ TK
■ Standard Products
Endurance : 125 °C 3000 h
Case size
W.V.
(V)
10
Cap.
(±20 %)
(μF)
220
330
470
100
16
220
330
100
25
220
330
47
35
100
220
Dia.
(mm)
8
8
10
10
8
8
10
10
8
8
10
10
8
8
10
10
Ripple
Current
✽Size (100 kHz)
Length
Code (+125 °C)
(mm)
10.2
10.2
10.2
10.2
10.2
10.2
10.2
10.2
10.2
10.2
10.2
10.2
10.2
10.2
10.2
10.2
Min.
Packaging Q'ty
Specification
F
(F)
G
(G)
F
(F)
G
(G)
F
(F)
G
(G)
F
(F)
G
(G)
ESR
(100 kHz)
(Ω)
(mA r.m.s.) +20 ºC -40 ºC
197
0.3
5
197
0.3
5
270
0.2
3
270
0.2
3
197
0.3
5
197
0.3
5
270
0.2
3
270
0.2
3
197
0.3
5
197
0.3
5
270
0.2
3
270
0.2
3
197
0.3
5
197
0.3
5
270
0.2
3
270
0.2
3
tan d
Part No.
(120 Hz) (RoHS:compliant) Reflow
(+20 °C)
0.30
0.30
0.30
0.30
0.23
0.23
0.23
0.23
0.18
0.18
0.18
0.18
0.16
0.16
0.16
0.16
EEETK1A221P
EEETK1A331UP
EEETK1A331P
EEETK1A471UP
EEETK1C101P
EEETK1C221UP
EEETK1C221P
EEETK1C331UP
EEETK1E101P
EEETK1E221UP
EEETK1E221P
EEETK1E331UP
EEETK1V470P
EEETK1V101UP
EEETK1V101P
EEETK1V221UP
(8)
(8)
(8)
(8)
(8)
(8)
(8)
(8)
(8)
(8)
(8)
(8)
(8)
(8)
(8)
(8)
Taping
(pcs)
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
✽ Size code( ) : Miniaturization product
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03 Mar. 2014
– EEE-56 –
Similar pages